Search

N-rich precursors govern the thermal polymerization formation of graphitic carbon nitride (g-C 3 N 4) based catalysts towards enhanced photocatalytic performance. In this paper, Cu components were introduced in superior thin g-C 3 N 4 nanosheets using the thermal polymerization copper acetate and bulk g-C 3 N 4 created by different precursors including melamine, dicyandiamide, and thiourea, such as melamine-g-C 3 N 4 (MCN), dicyandiamide-g-C 3 N 4 (DCN), and thiourea-g-C 3 N 4 (TCN). The performance of Cu-g-C 3 N 4 nanosheets depended strongly on the precursors of bulk g-C 3 N 4 samples. The well-developed Cu nanoparticles with clear lattice fringes were observed in the sample prepared using MCN (sample Cu-MCN) while the crystallinity of Cu nanoparticles became worse in the sample prepared using DCN (sample Cu-DCN). Interestingly, Cu clusters were homogeneously distributed in superior thin g-C 3 N 4 nanosheets in the case of using TCN (sample Cu-TCN) because of S components in thiourea affected the thermal polymerization. The photocatalytic activity of Cu-TCN was drastically improved compared with other Cu-g-C 3 N 4 samples. The photocatalytic hydrogen production rate of Cu-TCN with 1% of Cu components was 4035.6 μmol g-1 h-1. Cycle stability test indicated that sample Cu-TCN revealed high stability, in which the H 2 generation rate was retained 95% of their initial value after 5 cycles. These results supply efficient approaches for the study and application of g-C 3 N 4 based photocatalysts. • Cu components introduced in g-C 3 N 4 nanosheets using bulk g-C 3 N 4 created by different precursors. • Precursors (melamine, dicyandiamide, and thiourea) affect the activity of Cu-g-C 3 N 4 nanosheets. • Cu distribution in g-C 3 N 4 nanosheets depended on the thermal polymerization of precursors. • Cu clusters distributed in g-C 3 N 4 nanosheets created using thiourea revealed the best performance. [ABSTRACT FROM AUTHOR]

Atomically precise Ni 6 (SC 2 H 4 Ph) 12 nanoclusters (Ni 6 NCs) supported on g-C 3 N 4 nanosheets were constructed to enhance the photocatalytic hydrogen evolution performances. [Display omitted] Much effort has been devoted to improving the photocatalytic capacity of graphitic carbon nitride (g-C 3 N 4). In this paper, we reported the successful synthesis of a hybrid photocatalyst with superb photocatalytic hydrogen production activity through decorating atomically precise Ni 6 (SC 2 H 4 Ph) 12 nanoclusters on g-C 3 N 4 nanosheets (labeled as Ni 6 /g-C 3 N 4) at room temperature. Zeta potential experiments demonstrated that the electrostatic interaction between Ni 6 and g-C 3 N 4 led to the formation of Ni 6 /g-C 3 N 4. The photocatalytic measurements revealed that the 5 %-Ni 6 /g-C 3 N 4 prepared with the original mass ratio of m(Ni 6)/m(g-C 3 N 4) = 1/20 exhibited the strongest hydrogen production activity. In the system with triethanolamine (TEOA) as the sacrifice agent, the visible-light hydrogen production rate reached up to 5.87 mmol h−1 g−1, approximately 290 times higher than that of pure g-C 3 N 4 (0.02 mmol h−1 g−1). Density functional theory (DFT) calculations testified that the above significant enhancement of photocatalytic hydrogen evolution of the hybrid photocatalyst arose from the photogenerated electrons transfer from Ni 6 to g-C 3 N 4. [ABSTRACT FROM AUTHOR]

Two dimensional (2D)/2D heterostructures with much interface is advantage to improve the transfer of photogenerated carriers. In this paper, SnS 2 nanosheets were horizontally grown on superior thin graphic carbon nitride (g-C 3 N 4) nanosheets to construct 2D/2D heterostructures with enhanced photocatalytic performance. The g-C 3 N 4 nanosheets (CN) were obtained by a two-step thermal polymerization at 600 and 700 °C. the growth of SnS 2 nanosheets was then carried out using a solvothermal synthesis. Preparation parameters including temperature, reaction time, and precursor components were tested to get optimized SnS 2 /g-C 3 N 4 composite sample 8SnS 2 -CN. A Z-scheme mechanism was proposed for the discussion of photocatalytic process. The degradation test of Rhodamine B (Rh B) indicated that the degradation rate of Rh B using sample 8SnS 2 -CN was twice quick compared with g-C 3 N 4 nanosheets, in which Rh B degradation was completed within 15 min. The photocatalytic hydrogen production rate of sample 8SnS 2 -CN was about 6 times that that of sample CN, which is 1818.75 μmol g−1 L−1. Enhanced photocatalytic performance is ascribed to SnS 2 deposited to form well-developed interface which improved the separation and transfer of photogenerated carriers. In addition, the growth of SnS 2 was also expended the photo adsorption. [Display omitted] [ABSTRACT FROM AUTHOR]