Search

This paper presents the Hencky bar-chain model (HBM) for buckling and vibration analyses of Euler-Bernoulli beams with elastic end restraints. The Hencky bar-chain comprises rigid beam segments (of length a = L/n where L is the total length of beam and n the number of beam segments) connected by frictionless hinges with elastic rotational springs of stiffness EI/a where EI is the flexural rigidity of the beam. The elasticity and the mass of the beam are concentrated at the hinges with rotational springs. The key contribution of this paper lies in the modeling of the elastic end restraints of the Hencky bar-chain that will simulate the same buckling and vibration results as that furnished by the first-order central finite difference beam model (FDM) which was earlier shown to be analogous to the HBM. The establishment of such a physical discrete beam model allows one to obtain solutions for beam-like structure with repetitive cells (or elements) as well as to calibrate the Eringen's coefficient e0 in the nonlocal beam theory that captures the small length scale effect. [ABSTRACT FROM AUTHOR]

Cracks in structural members lead to local changes in their stiffness and consequently their static, dynamic and stability behavior is altered. The influence of cracks on dynamic characteristics like free vibration, buckling and parametric resonance characteristics of a cracked beam with a transverse crack using finite element method (FEM) is investigated in the present work. Modal testing of beams with transverse open crack is conducted using FFT analyzer to verify the frequencies of vibration of beams. The crack is assumed to be open type and the analysis is linear based on small deformation theory neglecting damping. The loading on the beam is considered as axial with a simple harmonic fluctuation with respect to time. A two-noded Timoshenko beam element with provision of crack is used in this study. The equation of motion represents a system of second-order differential equations with periodic coefficients of the Mathieu-Hill type. The development of the regions of instability arises from Floquet's theory and the periodic solution is obtained by Bolotin's approach using FEM. It is observed that the frequencies of vibration and buckling load of the beam are influenced significantly by location and depth of cracks. It is observed that, for a given location of crack, the onset of instability occurs earlier with increase in depth of crack. As the location of crack moves from the fixed end to the free end the excitation frequency increases. The instability occurs later and the width of the instability regions reduces. When the damage is near to the free end, the instability region almost coincides with the instability region for the undamaged beam. This means that the damage near the fixed end is more severe on the dynamic instability behavior than that of the crack located at other positions. The vibration and instability results can be used as a technique for structural health monitoring or testing of structural integrity, performance and safety. [ABSTRACT FROM AUTHOR]

In this paper, we analyze the transverse vibration of a circular plate loaded by uniform pressure along its edge. The plate is supported by an elastic ring support being coaxial with the plate. At its edge the plate is clamped but the radial displacement is allowed. Apart from this problem, the heated plate clamped at its edge, but without the possibility of radial displacement, is also analyzed. The analytical solution of governing equation is obtained in the form of Bessel's functions. Using the analytical solution, the frequencies of transverse vibrations depending on loads, elastic ring stiffness and the location of ring are obtained. The results show that the lowest frequencies vibrations can be either symmetric or asymmetric having one or two nodal diameters. It is also shown that multiple vibration frequencies can occur for special values of load and ring stiffness. [ABSTRACT FROM AUTHOR]