Search

0D organic metal halide hybrids (OMHHs) have recently emerged as a new generation of scintillation materials, due to their high luminescence quantum efficiency, sensitivity, stability, and cost‐effectiveness. While numerous 0D OMHH scintillators have been developed to date, most of them are based on solution grown single crystals that require time‐consuming synthesis and are limited in size. Here, high‐performance X‐ray scintillators based on facile solution processed 0D OMHH amorphous films are reported for the first time. By reacting triphenyl(9‐phenyl‐9H‐carbazol‐3‐yl) phosphonium bromide (TPPcarzBr) with manganese bromide (MnBr2), 0D (TPPcarz)₂MnBr₄ amorphous films can be prepared via solution processing with mild thermal annealing, which exhibits green photoluminescence with an emission maximum ≈517 nm and a photoluminescence quantum efficiency of ≈87%. The X‐ray scintillation of 0D (TPPcarz)₂MnBr₄ amorphous films is characterized to exhibit a light yield of 44600 photon MeV−1 and an outstanding linearity with a low limit of detection of 32.42 nGyairs−1 over a wide range of X‐ray dose rates. The versatile processability of 0D (TPPcarz)₂MnBr₄ is illustrated with remarkable recyclability, high cost‐effectiveness, and scalability for large‐scale production. By taking advantage of the amorphous nature of newly designed OMHHs, the approach opens up new opportunities for developing high‐performance, solution‐processable scintillators. [ABSTRACT FROM AUTHOR]

Efficient and stable scintillators play a crucial role in X‐ray detection applications. To enhance the luminescence efficiency under X‐ray excitation, the incorporation of multiple emission centers into scintillators is widely explored. Here, it is found that the cesium copper halide Cs5Cu3Cl6I2 exhibits dual emission centers, enabling high‐performance scintillators with an X‐ray light yield of 49000 photon MeV−1 and a low detection limit of 4 nGy s−1. The emissions of Cs5Cu3Cl6I2 are from intrinsic self‐trapped exciton (STE) and Frenkel defect‐assisted STE. High‐energy X‐rays can induce an increased fraction of Frenkel defect‐assisted STEs, which can serve as an effective scintillation channel. Furthermore, large‐area flexible scintillators with a high resolution of 18 lp mm−1 are developed, making them suitable for X‐ray imaging applications. These findings offer promising insights for developing more efficient scintillators. [ABSTRACT FROM AUTHOR]

The development of large‐area transparent organic‐inorganic hybrid metal halide (OIMH) scintillation screens is restricted by the anisotropic single‐crystal growth, numerous grain boundaries in polycrystalline wafers, and inhomogeneous dispersion in perovskite‐polymer composite films. The crystal‐glass phase transition of OIMH materials may provide a promising solution for the above significant challenges. Herein, a new class of transparent amorphous guanidinium‐based manganese bromide glasses, (DPG)2MnBr4 and (DOTG)2MnBr4 (DPG = 1,3‐diphenylguanidinium, DOTG = 1,3‐di‐o‐tolylguanidinium), are synthesized through a low‐temperature melt‐quenching process. The (DOTG)2MnBr4 shows impressive glass‐forming ability because of large viscosity (η) at the melting temperature (Tm) (η(Tm) = 3426 mPa·s) and small fragility index (m = 52.35), which can be a potential glass scintillator. The large‐area (e.g., 13 cm × 13 cm) transparent amorphous (DOTG)2MnBr4 glass scintillator shows high light transmittance of > 80%, a low detection limit of 237.3 nGy s−1 and high X‐ray imaging spatial resolution of 12 lp mm−1. Interestingly, the glass transition temperature of < 40 °C gives (DOTG)2MnBr4 glass unique thermoplastic properties, allowing it to conform to irregularly shaped objects and reduce the distortion in X‐ray imaging. [ABSTRACT FROM AUTHOR]

Chiral hybrid metal halides hold great potential as circularly polarized luminescence light sources. Herein, we have obtained two enantiomeric pairs of one‐dimensional hybrid chiral manganese(II) chloride single crystals, R/S‐(3‐methyl piperidine)MnCl3 (R/S‐1) and R/S‐(3‐hydroxy piperidine)MnCl3 (R/S‐2), crystallizing in the non‐centrosymmetric space group P212121. In comparison to R/S‐1, R/S‐2 single crystals not only show red emission with near‐unity photoluminescence quantum yield (PLQY) and high resistance to thermal quenching but also exhibit circularly polarized luminescence with an asymmetry factor (glum) of 2.5×10−3, which can be attributed to the enhanced crystal rigidity resulting from the hydrogen bonding networks between R/S‐(3‐hydroxy piperidine) cations and [MnCl6]4− chains. The circularly polarized luminescence activities originate from the asymmetric [MnCl6]4− luminophores induced by N−H⋅⋅⋅Cl hydrogen bonding with R/S‐(3‐hydroxy piperidine). Moreover, these samples demonstrate great application potential in circularly polarized light‐emitting diodes and X‐ray scintillators. This work shows a highly efficient photoluminescent Mn‐based halide and offers a strategy for designing multifunctional chiral metal halides. [ABSTRACT FROM AUTHOR]

Luminescent metal halides, as a type of luminescent semiconductor material, offer advantages that fulfill the requirements of emerging light source devices, such as high luminescence efficiency, good thermal stability, and tunable colorful emission. Blue light being one of the three primary colors plays a crucial role in the field of lighting and colorful displays. However, the progress in device performance of blue‐light materials lags behind that of green and red‐light materials. Currently, there have been numerous reports on metal halide perovskite blue‐light materials, but a comprehensive review on the development and performance control of blue‐light metal halides is yet to be found. This paper provides a comprehensive summary of the design strategies and luminescence mechanisms of blue‐light perovskites with various luminescence centers, as well as their application progress in the fields of light‐emitting diodes (LEDs), X‐ray scintillators, information anti‐counterfeiting and encryption. It also explores possible directions for subsequent performance improvement. This work aims to offer valuable insights and recommendations for the future development of blue‐light metal halides, with significant implications for the fabrication of novel blue light devices and advancements in detection technology. [ABSTRACT FROM AUTHOR]

Near‐infrared (NIR) luminescent metal halide (LMH) materials have attracted great attention in various optoelectronic applications due to their low‐temperature solution‐processable synthesis, abundant crystallographic/electronic structures, and unique optoelectronic properties. However, some challenges still remain in their luminescence design, performance improvement, and application assignments. This review systematically summarizes the development of NIR LMHs through classifying NIR luminescent origins into four major categories: band‐edge emission, self‐trapped exciton (STE) emission, ion emission, and defect‐related emission. The luminescence mechanisms of different types of NIR LMHs are discussed in detail by analyzing typical examples. Reasonable strategies for designing and optimizing luminescence/optoelectronic properties of NIR LMHs are summarized, including bandgap engineering, self‐trapping state engineering, chemical composition modification, energy transfer, and other auxiliary strategies such as improvement of synthesis scheme and post‐processing. Furthermore, application prospects based on the optoelectronic devices are revealed, including phosphor‐converted light‐emitting diodes (LEDs), electroluminescent LEDs, photodetectors, solar cells, and x‐ray scintillators, as well as demonstrations of some related practical applications. Finally, the existing challenges and future perspectives on the development of NIR LMH materials are critically proposed. This review aims to provide general understanding and guidance for the design of high‐performance NIR LMHs materials. [ABSTRACT FROM AUTHOR]

Inorganic scintillators play a pivotal role in diverse fields like medical imaging, nondestructive detection, homeland security, and high‐energy physics. However, traditional inorganic scintillators encounter challenges such as high fabrication costs and low light yield. Recently, low‐dimensional metal halide scintillators (LDMHS) have witnessed rapid progress, owing to their distinctive crystal structure and superior radioluminescence performance. Herein, an overview of recent advancements and proposed instructive pathways for achieving high‐performance LDMHS is provided. First, the scintillation physical mechanism and emphasis on the essential requirements of scintillators for diverse applications are elucidated. Furthermore, LDMHS are classified according to B‐site cations, and their respective characteristics and recent advancements are introduced. This encompasses the understanding of structure‐property relationships and the routes and rules for optimizing scintillation performance. Finally, the persisting challenges in this burgeoning field and proposed potential research directions for future exploration are discussed. [ABSTRACT FROM AUTHOR]

Organic–inorganic hybrid metal halides are widely used in X‐ray detection and imaging due to their high X‐ray absorption efficiency, ease of synthesis, and efficient luminescence. However, the issue of lead toxicity remains a concern. In this study, non‐toxic, 0D 2,2′‐(Ethylenedioxy)bis(ethylamine) manganese (II) bromide (EDBEMnBr4) is synthesized using the simple mechanical grinding method and the solution method that exhibits intense green emission at ≈525 nm. Moreover, the change of structure under the influence of temperature and water significantly affects its fluorescence color under UV light. Scintillator materials with and without moisture exposure showed spatial resolutions of 7 and 4 lp mm−1, and low detection limits of 4.62 and 5.25 µGyair s−1, respectively, meeting medical industry standards (<5.5 µGyair s−1). Furthermore, based on the apparent change in luminescence color triggered by moisture for EDBEMnBr4, a preliminary attempt is made to apply it to humidity monitoring showing that the boundary of color change has a good linear dependence on humidity and time. This work provides new opportunities for Mn‐based metal halides in both X‐ray detection as well as moisture detection. [ABSTRACT FROM AUTHOR]

Doping in luminescent metal halides has become an effective strategy for tailoring the optoelectronic properties. Herein, Cu+ is introduced into Rb2AgBr3 to design the synthesis of Rb2AgBr3:xCu+, which possess cold‐white light emission at room‐temperature without changing the spectral profiles; however, the Cu+ incorporation significantly enhances the photoluminescence quantum efficiency to 98.8% in Rb2AgBr3:0.05Cu+. Additionally, a high scintillation light yield of up to 79 250 photons MeV−1 and a low detection limit of 714.83 nGy s−1 have been achieved via this Cu+ doping engineering. X‐ray imaging with a spatial resolution of up to 5.8 lp mm−1 is further realized using a large scintillator film prepared by mixing polydimethylsiloxane with Cu+ doped Rb2AgBr3 scintillators. This study provides a Cu+ doping design principle for improving both the photoluminescence and scintillation performances of metal halides. [ABSTRACT FROM AUTHOR]

Low‐dimensional organic–inorganic metal halides (OIMHs) have emerged as promising light emitters due to their broadband emission originating from self‐trapped excitons (STE), especially for Cu‐based OIMHs. Herein, Cu(I)‐based OIMH with a structure of (TPP)2Cu4I6·2DMSO (TPP stays for tetraphenylphosphonium, and DMSO – for dimethyl sulfoxide) has been synthesized, both in form of single crystals and as a microcrystalline powder. This compound exhibits a broadband green emission with a peak at 515 nm and a full width at half‐maximum of 78 nm, and a near‐unity photoluminescence quantum yield of 99.5%. Experimental data supported by theoretical calculations indicate that the STE emission is responsible for the green emission with a long lifetime of 2.53 µs. Down‐conversion light‐emitting device with a high luminous efficiency of 50 lm W−1 based on this compound have been fabricated, and white light has also been achieved with a high color rendering index of 96.7. Moreover, green emissive (TPP)2Cu4I6·2DMSO is utilized in scintillators for X‐ray detection and imaging, and as a luminescent ink for encryption applications. [ABSTRACT FROM AUTHOR]

High‐pressure chemistry has provided a huge boost to the development of scientific community. Pressure‐induced emission (PIE) in halide perovskites is gradually showing its unique charm in both pressure sensing and optoelectronic device applications. Moreover, the PIE retention of halide perovskites under ambient conditions is of great commercial value. Herein, we mainly focus on the potential applications of PIE and PIE retention in metal halide perovskites for scintillators and solid‐state lighting. Based on the performance requirements of scintillator and single‐component white light‐emitting diodes (WLEDs), the significance of PIE and PIE retention is critically clarified, aiming to design and synthesize materials used for high‐performance optoelectronic devices. This perspective not only demonstrates promising applications of PIE in the fields of scintillators and WLEDs, but also provides potential applications in display imaging and anti‐counterfeiting of PIE materials. Furthermore, solving the scientific disputes that exist under ambient conditions is also simply discussed as an outlook by introducing high‐pressure dimension to produce PIE. [ABSTRACT FROM AUTHOR]

Large‐sized transparent scintillators with a high photoluminescent quantum yield (PLQY) and self‐absorption‐free properties are highly desired to achieve high spatial resolution X‐ray imaging. In this research, a transparent 0D organic–inorganic (ETP)2SbCl5 (ETP = Ethyl triphenylphosphine) amorphous wafer is developed by melting the ETPCl and SbCl3 mixture and then undergoing a quenching process. The obtained amorphous wafer exhibits a high light transmittance of 86% in the range of 450–800 nm. It also shows a light emission peak at 624 nm, a Stokes shift of 259 nm, and PLQY approaching unity (99.3%). These properties enable it to produce X‐ray images with a high spatial resolution of 19.0 lp mm−1 at a modulation transfer function (MTF) value of 0.2, among the best values reported. Additionally, it also shows remarkable stability under continuous X‐ray illumination. Its unique optical properties and ability to be processed in large sizes make the organic–inorganic metal halide transparent wafer a promising scintillator. This also demonstrates the potential application of the melt‐quenching method in fabricating highly luminescent, low‐electronic‐dimensional metal halide wafers. [ABSTRACT FROM AUTHOR]

Copper‐based halides have emerged as promising scintillator materials for X‐ray imaging due to their favorable photophysical characteristics, such as negligible self‐absorption, high light output, and fast decay. Among these materials, Cs3Cu2I5, a blue emitter, currently delivers the highest scintillation light output under steady‐state X‐rays. However, there is a significant spectral mismatch between its emission band and the spectral responsivity of regular flat‐panel photodiode arrays. In this study, a comprehensive analysis of the physical properties of the CsCu2I3 scintillator is conducted, and its perfect spectral compatibility is discovered, which results in a higher photodiode signal despite its relatively lower light output compared to typical Cs3Cu2I5 scintillators. Furthermore, CsCu2I3 exhibits faster light decay properties, making it especially suitable for Computed Tomography (CT) X‐ray imaging. High‐quality X‐ray cone beam computed tomography (CBCT) imaging is successfully demonstrated using the fast‐decaying CsCu2I3 scintillator screen. Additionally, the flexibility of the scintillator allows for non‐planar imaging, showcasing advantages not available with traditional rigid scintillators. These results not only highlight the significant promise of the CsCu2I3 scintillator but also emphasize the necessity of considering spectral compatibility when designing novel scintillator materials. [ABSTRACT FROM AUTHOR]

Conventional scintillator‐based X‐ray imaging typically captures the full spectral of X‐ray photons without distinguishing their energy. However, the absence of X‐ray spectral information often results in insufficient image contrast, particularly for substances possessing similar atomic numbers and densities. In this study, an innovative multi‐energy X‐ray linear‐array detector is presented that leverages side‐illuminated X‐ray scintillation using the emerging metal halide Cs3Cu2I5. The negligible self‐absorption characteristic not only improves the scintillation output but is also beneficial for improving the energy resolution for the side‐illuminated scintillation scenarios. By exploiting Beer's law, which governs the absorption of X‐ray photons with different energies, the incident X‐ray spectral can be reconstructed by analyzing the distribution of scintillation intensity when the scintillator is illuminated from the side. The relative error between the reconstructed and measured X‐ray spectral is < 5.63%. This method offers an additional energy‐resolving capability for X‐ray linear‐array detectors commonly used in computed tomography (CT) imaging setups, surpassing the capabilities of conventional energy‐integration approaches, all without requiring extra hardware components. A proof‐of‐concept multi‐energy CT imaging system featuring eight energy channels is successfully implemented. This study presents a simple and efficient strategy for achieving multi‐energy X‐ray detection and CT imaging based on emerging metal halides. [ABSTRACT FROM AUTHOR]

The search for efficient, re-absorption-free scintillators has recently focused the attention on antimony-based halides, which exhibit largely Stokes shifted luminescence due to radiative recombination of excitons self-trapped (STE) in strongly Jahn-Teller distorted Sb3+ color centers. Here, the synthesis of a hybrid structure is reported with chemical formula (C13H14N3)3SbCl6 consisting of spatially isolated [SbCl6]3- octahedra separated by organic N, N'-diphenylguanidinium (Gua) molecules. The optical properties of this material are mainly determined by the inorganic component and are characterized by a pronounced Stokes shift of "1.3 eV and a room-temperature photoluminescence (PL) efficiency of up to 85%. Remarkably, highly efficient radioluminescence (RL) is observed with scintillation light yields of "2000 ph MeV-1 using both soft X-rays and a 124 keV gamma source. Temperature-dependent PL and RL measurements confirm the minor role of non-radiative channels, which are completely suppressed below 100 K. Thermally stimulated luminescence measurements suggest that the traps in Gua3SbCl6 crystals have a significantly large energy depth distribution below the absorbing state. [ABSTRACT FROM AUTHOR]

In this study, a new Cs4SrI6:Yb2+,Sm2+ near‐infrared (NIR) emitting scintillator was developed using sensitization strategy. It was found that Yb2+ sensitization significantly enhances the NIR radioluminescence (RL) of Sm2+, providing a new approach of designing highly emissive sensitized NIR scintillators. By studying the optical spectra and decay kinetics of Cs4SrI6:Yb2+,Sm2+, it was revealed that the energy transfer pathways involve both radiative and nonradiative processes. The gamma spectroscopy performance of Cs4SrI6:Yb2+,Sm2+ single crystals was studied by using the high‐quantum‐efficiency avalanche photodiode (APD) as the readout. Our results highlight the importance of using sensitization strategy of achieving NIR emitting scintillators and demonstrate the significant potential for radiation detection applications. [ABSTRACT FROM AUTHOR]

Single‐component metal halides with white light emission are highly attractive for solid‐state lighting applications, but it is still challenging to develop all‐inorganic lead‐free metal halides with high white‐light emission efficiency. Herein, by rationally introducing silver (Ag) into zero‐dimensional (0D) Cs3Cu2Br5 as new structural building unit, a one‐dimensional (1D) bimetallic halide Cs6Cu3AgBr10 is designed that emits strong warm‐white light with an impressive photoluminescence quantum yield (PLQY) of 94.5% and excellent stability. This structural transformation lowers the conduction band minimum while maintaining the localized nature of the valence band maximum, which is crucial in expanding the excitation spectrum and obtaining efficient self‐trapped excitons (STEs) emission simultaneously. Detailed spectroscopy studies reveal that the white‐light originates from triplet STEs emission, which can be remarkably improved by weakening the strong electron‐phonon coupling and thus suppressing phonon‐induced non‐radiative processes. Moreover, the interesting temperature‐dependent emission behavior, together with self‐absorption‐free property, make Cs6Cu3AgBr10 as sensitive luminescent thermometer and high‐performance X‐ray scintillator, respectively. These findings demonstrate a general approach to achieving effective single‐component white‐light emitters based on lead‐free, all‐inorganic metal halides, thereby opening up a new avenue to explore their versatile applications such as lighting, temperature detection and X‐ray imaging. [ABSTRACT FROM AUTHOR]

Scintillators, which can convert high‐energy ionizing radiation (e.g., X‐ or γ‐rays) into ultraviolet‐visible light, have been widely applied in medical and industrial fields. Developing new scintillation materials with high performance and low cost is very desirable in order to address the growing application demands. Among them, single‐crystal scintillators of organic‐inorganic hybrid metal halides (OIMHs) have attracted much attention because of their excellent optical transparency, suppressed light scattering, and facile solution preparation methods. Herein, three new centimeter‐sized (2‐DMAP)2MnX4 (2‐DMAP+ = 2‐dimethylaminopyridinium, X = Cl, Br, I) single crystals with high crystal quality are synthesized via the solvent evaporation method. Benefiting from the high optical transparency and remarkable luminescence property, (2‐DMAP)2MnBr4 delivers a high X‐ray light yield of 22 000 photons MeV−1, a low limit of detection of 9.50 nGy s−1, and an excellent X‐ray imaging spatial resolution of 20–25 lp mm−1. Moreover, the regulation of single‐crystal thickness from 0.31 mm to 3.03 mm can be easily achieved via a simple solution post‐treatment method, which has a significant influence on the transmittance, spatial imaging resolution, and detection limit. This work demonstrates a promising single‐crystal scintillator for the application of high‐resolution X‐ray imaging with low preparation cost and tunable thickness. [ABSTRACT FROM AUTHOR]

Copper metal halides have emerged as a strong contender in the scintillator field due to the self‐trapped excitons (STEs) mechanism. However, their development has been hindered by the preparation process. Single crystals have long growth cycles and cannot achieve large areas and flexibility. Quantum dots have a low yield and can easily cause chemical pollution, and the thickness of films prepared by the spin coating cannot be controlled. To address these challenges, a new method for preparing Cs3Cu2Cl5 using sequential vacuum evaporation is developed. This allows successful preparation of large‐area (≈100 cm2) and flexible films. The STEs mechanism of Cs3Cu2Cl5 gives it unique properties such as a large Stokes shift that reduces self‐absorption effects, and a wide full width at half‐maximum that improves coupling with photodiodes. Therefore, Cs3Cu2Cl5 is applied to X‐ray imaging with a light yield of ≈30 000 photons MeV−1, a spatial resolution of over 10 lp mm−1, and a low detection limit below 0.8 µGyair s−1. In addition, the flexible Cs3Cu2Cl5 film enables effective dynamic imaging and clear imaging on non‐planar objects. It also exhibits good resistance to harsh environments, maintaining good imaging performance after 150 days. It is believed that sequential vacuum evaporation provides an important idea for preparing scintillators. [ABSTRACT FROM AUTHOR]

Lead‐free metal halides are considered a new generation of optoelectronic materials due to their low toxicity, superior optoelectronic properties, ease of synthesis, structural diversity, and low cost. In particular, Mn2+‐based metal halides have earned intensive attention owing to their high emission quantum efficiency, rich physical properties (e.g., triboluminescence and stimuli‐responsivity), low cost, and toxicity. Due to the different coordination environments of Mn ions, Mn2+‐based metal halides can exhibit green, red, and near‐infrared emissions. This review summarizes the recent progress of Mn2+‐based metal halides in synthesis methods, emission mechanisms, photophysical properties, and representative applications in X‐ray scintillations, white light‐emitting diodes, optical anti‐counterfeiting technologies, and fluorescent sensors. Finally, the challenges and potential research directions toward developing Mn2+‐based metal halides are also predicted. [ABSTRACT FROM AUTHOR]

Metal halide scintillators have drawn great interest for X‐ray imaging; however, it remains challenging to simultaneously achieve a high light yield (LY) and highly sensitive detection. Herein, Zn2+ is successfully introduced into [TPPen]2MnBr4 (TPPMB, TPPen = pentyltriphenylphosphonium) and the synthesis of [TPPen]2Mn0.9Zn0.1Br4 (TPPMZB) is designed. The LY increases from 43 000 for TPPMB to 68 000 photons MeV−1 for TPPMZB in virtue of the Zn atom doping. Additionally, the detection limit of TPPMZB is 204.1 nGy s−1, showing great improvement to that of TPPMB with the value of 696.9 nGy s−1. X‐ray imaging is realized by utilizing the large‐scale scintillator film fabricated by mixing polydimethylsiloxane with TPPMZB or TPPMB, and the spatial resolution is enlarged from 4.6 to 11.2 lp mm−1 after Zn2+‐doping. This study provides a design principle by doping engineering for enhancing the LY property of metal halide X‐ray scintillators. [ABSTRACT FROM AUTHOR]

Zero‐dimensional (0D) structure‐based manganese metal halides (MHs) are believed to be the most promising candidates for the next‐generation X‐ray scintillators due to their intense radioluminescence and environmental friendliness. However, low‐temperature (<180 °C), large‐area integration with more efficient X‐ray detection remains a tremendous challenge. Herein, from the perspective of cation (ionic liquids) structure design, the basic physical parameters of 0D MHs are regulated. And the calculations and experimental results demonstrate larger‐size cations that induce lower melting temperatures, larger exciton‐binding energies, larger ion migration energy, and tunable hardness, which are most desirable for MHscintillators. As a result, the champion materialHTP2MnBr4is achieved as glassy transparency wafer by low‐temperature (165 °C) melt‐quenching. Its application to X‐ray imaging features high spatial resolution (17.28 lp mm−1), scalability (>30 × 30 cm2), and integration with strong coupling force. Furthermore, HTP2MnBr4 glass with reproducible properties demonstrates a high light yield (38 000 photon MeV−1), excellent irradiation stability, and low detection limit (0.13 µGy s−1). The authors believe this work will provide guidance for MHscintillators to further commercial applications. [ABSTRACT FROM AUTHOR]

Organic–inorganic hybrid metal halides are a promising platform for the design of materials for circularly polarized luminescence (CPL) and X‐ray detection applications. Meanwhile, despite the recent progress in this hot field, hybrid metal halides, simultaneously endowed with efficient CPL and high photoluminescence quantum yield (PLQY), are still limited to a few examples. Herein, the efficient, stable, and low‐cost CPL‐active Mn(II) hybrids are developed via blending of luminogenic [MnBr4]2− anions with N/OH‐bond free R/S‐[MBA‐Me3]+ cations in a single ionic structure. The synthesized R/S‐[MBA‐Me3]MnBr4 hybrids display brightly green Mn2+‐centered circularly polarized phosphorescence with near‐unity PLQY and a high glum factor of 0.0045. Single crystals of R/S‐[MBA‐Me3]MnBr4 are used to fabricate UV‐pumped circularly polarized light‐emitting diodes (LEDs) displaying a high optical selectivity upon exposure to right‐handed and left‐handed circular polarization conditions. Moreover, the titled compounds are found to emit strong X‐ray radioluminescence with excellent linear response to X‐ray dose rate that is used for X‐ray imaging demonstration. These findings reveal a great potential of R/S‐[MBA‐Me3]MnBr4 as low‐cost materials for CPL‐LEDs, scintillators, and X‐ray imaging applications. [ABSTRACT FROM AUTHOR]

In recent years remarkable progress has been made on developing low‐dimensional perovskite‐related materials. In particular, with the aim of going toward compounds with low toxicity, various low‐dimensional metal halide nanocrystals have been synthesized and investigated. These nanocrystalline compounds crystallize in a plethora of structures and dimensionalities, in many cases with exciting optical properties. Thanks to their photoluminescence emission, which is typically broad and largely Stokes‐shifted, such nanocrystals can find applications in indoor lighting, scintillators and luminescent solar concentrators. In this review, recent developments leading to the improvement/management of light emission from such low‐dimensional metal halide nanocrystals are highlighted and the possible origin of their light emission is discussed. Furthermore, parallels with their bulk counterparts are drawn and an outlook on what is still worth exploring/studying in this field of research is provided. [ABSTRACT FROM AUTHOR]

Glass is a group of materials with appealing qualities, including simplicity in fabrication, durability, and high transparency, and they play a crucial role in the optics field. In this paper, a new organic–inorganic metal halide luminescent glass exhibiting >78 % transmittance at 506–800 nm range together with a high photoluminescence quantum yield (PLQY) of 28.5 % is reported through a low‐temperature melt‐quenching approach of pre‐synthesized (HTPP)2MnBr4 (HTPP=hexyltriphenylphosphonium) single crystal. Temperature‐dependent X‐ray diffraction, polarizing microscopy, and molecular dynamics simulations were combined to investigate the glass‐crystal interconversion process, revealing the disordered nature of the glassy state. Benefiting from the transparent nature, (HTPP)2MnBr4 glass yields an outstanding spatial resolution of 10 lp mm−1 for X‐ray imaging. The superb optical properties and facility of large‐scale fabrication distinguish the organic–inorganic metal halide glass as a highly promising class of materials for optical devices. [ABSTRACT FROM AUTHOR]

Copper‐based metal halide scintillators have received increasing attention due to their high light yield and nontoxicity. However, the synthetic methods are still not feasible for actual commercialization for the difficulty in scaling up and the absence of green chemical footprint. Herein, we report a new, simple, aqueous synthetic method for the mass production of highly purified and crystallized Cs3Cu2Cl5 powder by a room‐temperature reaction between a saturated aqueous solution of CsCl and a saturated hydrochloric acid solution of CuCl. The product exhibits a photoluminence peak centering at 527 nm (FWHM = 106.7 nm) and a quantum yield (PLQY) of 97%. A prototype X‐ray imaging detector is fabricated by coupling a large area scintillation screen prepared by blade coating of Cs3Cu2Cl5 powder and a commercial thin‐film transistor (TFT) panel (16 cm × 13 cm, 125 µm pixel size) with readout circuit. The device exhibits a high spatial resolution of 4 lp mm−1, exceeding the theoretical limit of the TFT panel, and an excellent dynamic imaging ability. In short, this work demonstrates an efficient novel synthetic method of Cs3Cu2Cl5 and its application as X‐ray imaging device, providing an applicable solution for its future commercialization. [ABSTRACT FROM AUTHOR]

Mn2+ dopants introduce a new emission center in semiconductor luminescent materials, endowing them promising photoluminescence (PL) properties, such as a wide color tuning range, reversible color change, reduced self‐absorption etc. Recently, rapid development of Mn2+ doped metal halide perovskites (MHPs) promote their promising applications in displays, photovoltaics, scintillators, etc. The emission color, luminous efficiency, and energy transfer pathway of doped perovskites are affected by condition of host lattice that accommodates Mn2+ ions. In this review, the optical properties determined by host materials with diverse geometries involving perovskite nanocrystals and perovskite derivatives is focused on, and the possible energy transfer routes in different doping systems are analyzed. An overview of recent advances of different doped systems with assigned emission channels together with the influence factors, strategies to enhance PL intensity and finally potential applications are summarized. To the end, the underlying challenges and possible solutions for further research in Mn doped perovskites are proposed. [ABSTRACT FROM AUTHOR]

Scintillators with high light yield, low detection limit, large X‐ray attenuation efficiency as well as stable and nontoxic compositions are of great importance for radiation detection applications. Here, 0D (C8H20N)2Cu2Br4 single crystals are obtained and show blue emission peaking at 468 nm with a near‐unity photoluminescence quantum yield of 99.7%, a large Stokes shift of 148 nm (i.e., negligible self‐absorption), and a good environmental stability along with strong X‐ray absorption capability. Moreover, a high light yield of up to ≈ 91 300 photons/MeV and a low detection limit of 52.1 nGyair s−1 are realized, which is more than one hundred times lower than the dose rate of 5.5 µGyair s−1 required for X‐ray medical diagnostics. (C8H20N)2Cu2Br4 ceramic wafer scintillation screen is fabricated by a cold pressing sintering process, and the clear contrast images of opaque metal box and electronic component with a spatial resolution of 9.54 lp mm−1 are realized. This study not only designs a new lead‐free metal halide scintillator, but also develops a universal strategy for the preparation of large‐sized scintillator screen in nondestructive X‐ray imaging. [ABSTRACT FROM AUTHOR]

Scintillators with high light yield, low detection limit, large X‐ray attenuation efficiency as well as stable and nontoxic compositions are of great importance for radiation detection applications. Here, 0D (C8H20N)2Cu2Br4 single crystals are obtained and show blue emission peaking at 468 nm with a near‐unity photoluminescence quantum yield of 99.7%, a large Stokes shift of 148 nm (i.e., negligible self‐absorption), and a good environmental stability along with strong X‐ray absorption capability. Moreover, a high light yield of up to ≈ 91 300 photons/MeV and a low detection limit of 52.1 nGyair s−1 are realized, which is more than one hundred times lower than the dose rate of 5.5 µGyair s−1 required for X‐ray medical diagnostics. (C8H20N)2Cu2Br4 ceramic wafer scintillation screen is fabricated by a cold pressing sintering process, and the clear contrast images of opaque metal box and electronic component with a spatial resolution of 9.54 lp mm−1 are realized. This study not only designs a new lead‐free metal halide scintillator, but also develops a universal strategy for the preparation of large‐sized scintillator screen in nondestructive X‐ray imaging. [ABSTRACT FROM AUTHOR]

Luminescent metal halide perovskites (MHPs) open new avenues for highly efficient radiation detection. To challenge the state‐of‐art technology, fundamental understanding of factors controlling radiation light yield of MHP scintillators is urgent. Herein, a design method is established by simultaneously considering charge‐transfer and recombination efficiencies via band alignment engineering in doped MHPs materials, and this strategy is corroborated experimentally and computationally by applying it to the luminescence of ns2 electron (Sb3+, Bi3+, and Te4+) doped vacancy‐ordered double perovskite Cs2ZrCl6. Alloying Te4+ into Cs2ZrCl6 is optimized and significantly improves the scintillation performance, including a twofold increase in light yield and a threefold increase in detection limit over pristine Cs2ZrCl6, and high‐resolution X‐ray imaging with 20 μm for 2D and 0.2 mm for 3D imaging. It is believed that doping engineering in MHPs enabling band alignment method holds great potential for the development of next‐generation MHP scintillators. [ABSTRACT FROM AUTHOR]

Although low‐dimensional hybrid metal halides have emerged as promising light emitters due to their broadband emission originated from self‐trapped exciton (STE), the synthesis of lead‐free halides with high photoluminescence quantum yield remains a challenge. Herein, a series of new luminescent single crystals of antimony‐based metal halides [Na(DMSO)2]3SbBr6−xClx (x = 0, 2, 3, 4, 6) is synthesized. By optimizing the ratio of Br and Cl, [Na(DMSO)2]3SbBr3Cl3 exhibits an ultra‐broadband yellow light emission peaking at 606 nm with a full width at half‐maximum of 160 nm and a high photoluminescence quantum yield of 90.6%. Both experimental characterizations and theoretical calculations indicate that STE emission is responsible for the ultra‐broadband yellow light emission. Furthermore, blue LED chip‐pumped white light‐emitting diodes by using the yellow‐emitting [Na(DMSO)2]3SbBr3Cl3 are demonstrated, showing a correlated color temperature of 3948 K and a color rendering index of 85. Finally, a large‐size and flexible [Na(DMSO)2]3SbBr3Cl3 scintillator used for X‐ray imaging is prepared by a template assembled method, exhibiting a high spatial resolution of 15.5 lp mm−1 and a low detection limit of 285.8 nGyair s−1. This work highlights the potential of Sb‐based halides in solid‐state illumination and X‐ray imaging. [ABSTRACT FROM AUTHOR]

Environmentally friendly metal halides have emerged as emitters in lighting and X‐ray imaging applications. However, the conventional scintillator fabrication process involves high‐temperature sintering or powder grinding, resulting in large bulk crystals or agglomerates, which hamper flexible device integration and processability. Here, large‐area flexible scintillation screen films containing (C24H20P)2MnBr4 nanocrystals are prepared in situ, which prevents the generation of agglomerated powders or large bulk crystals, and the preparation duration and cost are reduced. The film exhibits good mechanical stability and homogeneity, and the photoluminescence quantum yield is over 85%. Moreover, the film presents excellent scintillation performance with detection limit as low as 0.608 μGyair s−1 and 14.5 lp mm−1 X‐ray imaging resolution. This excellent performance and simple preparation method are expected to favor industrial mass production. [ABSTRACT FROM AUTHOR]

Metal halide perovskite‐based high‐performance X‐ray scintillator is considered as one of the most favorable candidates applied in the fields of medicine, industry, and science. However, the current X‐ray scilltillators based on perovskites still suffer from the issue of poor stability, which impedes their further wide applications. Herein, a template assembled method to prepare large‐size, flexible, and stable CsPbBr3@Polymethyl methacrylate composite films in ambient conditions is developed and their detection performance is studied. The composite films can maintain 94% and 81% of the initial PL intensity after 2000 cycles bending and storing in water over 2520 h, respectively. In addition, the prepared scintillators exhibit not only a low detection limit of 40.1 nGyair s−1 and a high spatial resolution of 8.0 lp mm−1, but also an excellent tolerance against radiation (108 h). Thus, this simple but yet effective method would not doubt pave the way for further development of scintillators and might be well applicable to other metal halides. [ABSTRACT FROM AUTHOR]

Scintillators are critical in medical imaging, non‐destructive security screening, and space exploration applications. However, it still remains a challenge to achieve large‐area and high‐transparency scintillators by a low‐cost and easy‐to‐implement way. Herein, a large transparent medium with a diameter over 10 cm is prepared via a facile melt‐quenching strategy using a stoichiometric mixture of ethyltriphenylphosphonium bromide (ETPBr) and MnBr2 as raw materials. Benefiting from the crystallization behavior of high‐efficiency green‐emitting (ETP)2MnBr4 nanocrystals hybridized with amorphous phase in the transparent wafer, the (ETP)2MnBr4‐based transparent medium as a scintillator evidences a high transparency (over 80%, ranging from 500 to 800 nm), a high light yield of ≈35 000 ± 2000 photon per MeV, a low detection limit of 103 nGy S–1, and a competitive spatial resolution of 13.4 lp mm–1 for X‐ray imaging. This work offers a distinctive simple and fast melt‐quenching methodology to fabricate (ETP)2MnBr4 metal halide X‐ray scintillator wafer with large‐area and shape flexibility, excellent transparency, and high scintillation performance for the medical or industrial X‐ray imaging application. [ABSTRACT FROM AUTHOR]

Scintillators are widely utilized as X‐ray imaging detectors. Pixelated scintillator films with optical‐waveguide‐effect are preferred to realize high‐resolution X‐ray imaging. However, it remains a great challenge to rapidly fabricate high‐resolution pixelated scintillator film. Herein, a new strategy is developed to solve the problem by embedding metal halide scintillators into an anodic aluminum oxide (AAO) via a facile hot‐pressing method. Cs3Cu2I5 is selected as the prototype to fabricate pixelated scintillator films with targeted thickness, denoted as Cs3Cu2I5−AAO. The light confinement effect provided by AAO is validated by finite‐difference time‐domain simulations. In particular, the as‐prepared Cs3Cu2I5−AAO film demonstrates higher spatial resolution (10.4 lp mm−1 at modulation transfer function = 0.2), higher UV and X‐ray imaging performances compared to the homogeneous counterpart and commercialized terbium‐doped gadolinium oxysulfide. These results can inspire further research on the design of nanostructured metal halide perovskites for high‐resolution X‐ray imaging. [ABSTRACT FROM AUTHOR]

The high‐profile candidacy of low‐dimensional metal‐halide single crystals as promising light emitters originates from the intriguing emission properties (e.g., extremely broad luminescence spectra, large Stokes shift, high color rendition), which have enabled the recent great achievements on their application in lighting, artificial illumination, and scintillators. Among the family of low‐dimensional metal‐halide single crystals, zero‐dimensional (0D) materials have been featured in the lowest dimensionality, and as a consequence, strongest quantum confinement, softest lattice, and strongest electron–phonon coupling have been further translated into near‐unity photoluminescence (PL) efficiency with broadband emission. However, as far as it is known, 0D structures are significantly underexplored. Herein, an overview is provided on recent advances of 0D metal‐halide single crystals, with a focus on comprehensive understanding and insightful perspectives behind the photophysical mechanism. Additionally, the challenges and future opportunities currently faced by 0D bulk metal halides are discussed in order to provide a roadmap for the future development of novel materials with versatile optical properties suited for practical applications. [ABSTRACT FROM AUTHOR]

Hybrid manganese halide has attracted much attention in the field of environment friendly ferroelectric and photo‐responsive multifunctional materials. Here, the highly efficient photoluminescent inorganic framework MnBr42− is utilized to conceive and synthesize a series of hybrid manganese bromide compounds [RQ]2MnBr4 by introducing precisely designed quasi‐spherical cations [RQ]+ (R = H, Me, Et, FEt, Q = quinuclidine). The accurate and effective modification of cations not only achieves the satisfactory ferroelectricity, but also enhances the photoluminescence quantum yield from 38.7% to 83.65%. Moreover, [FEtQ]2MnBr4 shows a highly efficient X‐ray scintillator performance, including a large range of linear response to X‐ray dose rate from 0.3 to 414.2 μGyair s−1, a high light yield of 34 438 photons per MeV, and a low detection limit of 258 nGyair s−1. This work provides an efficient strategy for the preparation of hybrid manganese halide ferroelectrics with highly efficient light‐emission and X‐ray detection. [ABSTRACT FROM AUTHOR]

Environmental friendly metal halides have become emerging candidates as energy downconverting emitters for lighting and X‐ray imaging applications. Herein, luminescent single crystals of tetramethylammonium manganese chloride (C4H12NMnCl3) and tetraethylammonium bromide ((C8H20N)2MnBr4) are synthesized via a facile room‐temperature evaporation method. C4H12NMnCl3 and (C8H20N)2MnBr4 with octahedrally and tetrahedrally coordinated Mn2+ have correspondingly exhibited red and green emission peaking at 635 and 515 nm both originating from 4T1–6A1 transition of Mn2+ with high photoluminescence quantum yield (PLQY) of 91.8% and 85.1% benefiting from their specific crystal structures. Thanks to their strong photoexcitation under blue light, high PLQY, tunable emission spectra, good environmental stability, the white light‐emitting diode based on blending of C4H12NMnCl3 and (C8H20N)2MnBr4 delivers an outstanding luminous efficacy of 96 lm W−1, approaching commercial level, and shows no obvious photoluminescence intensity degradation after 3000 h under operation. In addition, manganese halides also demonstrate interesting characteristics under X‐ray excitation, C4H12NMnCl3 and (C8H20N)2MnBr4 exhibit steady‐state X‐ray light yields of 50 500 and 24 400 photons MeV−1, low detectable limits of 36.9 and 24.2 nGyair s−1, good radiation hardness, and X‐ray imaging demonstration with high‐resolution of 5 lp mm−1. This work presents a new avenue for luminescent Mn‐based metal halides toward multifunctional light‐emitting applications. [ABSTRACT FROM AUTHOR]

Scintillators for radiation detection are of great significance in medical imaging, security, and nondestructive inspection. The current challenge for scintillators is to simultaneously achieve high scintillation light yield, fast radioluminescence, simple film fabrication, large X‐ray attenuation efficiency as well as stable and nontoxic compositions; no previous scintillators fulfill all the above requirements. Here, metal halide Rb2AgBr3, possessing defect‐bound excitonic radioluminescence, is shown as efficient and fast scintillators. This nontoxic and stable scintillator emits from excitons bound to neutral bromine vacancies, enjoying an efficient and spin‐allowed fast emission with minimized self‐absorption. Rb2AgBr3 thus has a high light yield (25 600 photons MeV−1), fast scintillation decay time (5.31 ns), and a record value of light yield versus decay time (4821 photons MeV−1 ns−1). The close‐space sublimation method is developed for fast and scalable fabrication of oriented Rb2AgBr3 films. The scintillator film is further integrated with commercial flat‐panel imagers, and the spatial resolution reaches 10.2 line pairs per millimeter at the modulation transfer function of 0.2, doubling the resolution of conventional CsI:Tl flat‐panel detectors. The dynamic X‐ray imaging and its use to real‐time monitoring of bone movement without ghosting effect is also demonstrated. [ABSTRACT FROM AUTHOR]

Scintillator is a unique class of luminescent materials, which is extensively used in many fields such as nondestructive testing, medical imaging, space probes, etc. Compared with the disadvantages of traditional scintillator materials which have high cost, are fragile, have long response time and low spatial resolution disadvantages, metal halide perovskites are considered to be the most potential scintillator materials in X‐ray detection and medical imaging due to their preeminent performance of radiative absorption, carrier transportation, high photoluminescence, high atomic number (Z), high‐quality elements, and low‐temperature solution process. However, this material has blemishes such as poor stability and low luminous efficiency in the application of X‐ray detection. In recent years, many start‐of‐art and momentous works have been carried out to solve these problems. Herein, it is intended to summarize the progress of perovskite scintillators to date and propose a scheme for the development of their bottlenecks. First, the physical phenomena and main parameters of scintillators are summarized. Second, the classification of scintillator materials and their application of perovskite scintillators are outlined. Finally, the issues that remain in the application of perovskite scintillators and provide a simple outlook for possible directions in future applications are discussed. [ABSTRACT FROM AUTHOR]