Search

This article presents a compact microstrip dual-band bandstop filter (BSF), in which one λg/4 defected ground structure (DGS) pair is utilised to realise one stopband while two stepped impedance resonators (SIRs) help obtain another stopband and suppress the spurious harmonics. The design strategies and the equivalent circuits are introduced in detail. The measured results indicate 43.8% and 18.7% fractional bandwidth in the two stopbands (2.4 GHZ and 5.2 GHz) respectively, and the return loss is greater than 15 dB in the whole passband. In addition, size reduction can be conveniently achieved by adjusting the length of the SIRs and DGS. [ABSTRACT FROM AUTHOR]

Two high selectivity wideband filtering crossovers using stub-loaded ring resonators are proposed in this paper. Cascaded coupled lines and open stubs are used to generate two/four transmission zeros each near the crossover passbands. In addition, patterned grounded conductor in the ground plane can enlarge the coupling coefficient for the coupled lines with increasing the even-mode characteristic impedance, and the isolated conductor placed inside the slot can decrease the odd-mode characteristic impedance. Two filtering crossovers operated at 2.2 GHz with bandwidths of 27.5% from 1.945 to 2.55 GHz are designed and fabricated. They show good return loss more than 20 dB and nice insertion loss less than 1.7 dB in passband. [ABSTRACT FROM PUBLISHER]

Two novel second-order dual-band bandpass filters (BPFs) with high isolation and high selectivity using coupled lines are realised with a T-shaped bandstop structure. The centre frequencies of the two dual-band BPFs can be adjusted to the desired values by changing the coupling coefficients and characteristic impedances of the two transmission paths. Two dual-band BPFs located at 1.87 and 2.53 GHz and 1.9 and 2.42 GHz are designed and fabricated for demonstration. Good agreements can be observed between simulated and measured performances. [ABSTRACT FROM PUBLISHER]

A compact tri-band bandpass filter using input/output cross coupling is proposed. Three passbands can be adjusted by changing the characteristic impedance of the T-shaped structure with a shorted stub. The three passbands are designed to operate at 1.85, 3.5 and 5.2 GHz based on the T-shaped structure. Four transmission zeros are used to realise high selectivity for the passbands. Good agreement can be observed between the measured and simulated results. [ABSTRACT FROM AUTHOR]