Search

Nowadays, what captures consumers' primary attention is how to purchase electric vehicles with long range and desirable price. Lightweight construction stands as one of the most effective approaches for prolonging range and lowering costs. As a consequence, it is particularly imperative to undertake lightweight design optimization for the battery bracket of new energy vehicles by applying 3D printing technology. To actualize this goal, Rhino software was initially employed for 3D modeling to design the battery bracket system for a pure electric vehicle in China. Subsequently, topology optimization design of the battery bracket was carried out by adopting Altair Inspire software. Last but not least, manufacturing and assembly inspection were completed using a 3D printer. The results show that the maximum displacement of the battery lower tray bracket after topology optimization is 3.20 mm, which is slightly higher than before, but still relatively small. The maximum Mises equivalent stress rose to 240.7 MPa post-optimization, but brought about a uniform stress distribution at the bottom of the bracket. In comparison, the minimum factor of safety met design requirements at 1. The mass was lessened to 0.348 kg, representing a 49.2% decrease in comparison with pre-optimization levels. The 3D-printed bracket was fabricated by employing a 3D printer, thereby achieving the aforementioned mass abatement. The battery pack parts exhibited a bright surface with low roughness and no discernible warping or deformation defects. As revealed by the assembly results, the components of the battery pack bracket are tightly coordinated with each other, with no evident assembly conflicts, revealing that the dimensional accuracy and fit of the completed parts meet production requirements. These findings lay solid groundwork for the mass production of high-performance battery pack brackets. [ABSTRACT FROM AUTHOR]

Interest towards electric vehicle adoption is on the rise due to the lower running and maintenance cost it offers, along with zero tailpipe emissions. Range anxiety is one of the only concern that affects the adoption of electric vehicles. The state of charge of the traction battery pack has to be accurately determined and provided to the user to avoid range anxiety. Minute battery parameters has to be considered to improve the accuracy of the state of charge determination. In order to overcome the problem of range anxiety, an innovative strategy that takes into account how vibrations affect the performance of EV batteries is developed in this research. By doing this, the state of charge estimation precision is improved and thereby raises the driver's faith in electric vehicles. The impacts and vibrations felt on the traction battery pack during driving would lead to heat generation. The heat generated is found to be highest when the vibrations resonate at the natural frequencies of the traction battery pack. The natural frequency of the battery pack is considered when the battery is kept in the battery chamber of the two-wheeler electric vehicle. The vibrations at natural frequency produces heat which is accounted for when the state of charge is determined. To obtain accurate state of charge estimation, a Kalman filter-based approach is used. The Kalman filter-based estimation uses the conventional methods which are the open circuit voltage method and the Coulomb counting method to improve the estimation process along with the consideration of the heat component due to vibrations and impact. The vibration analysis is performed using MATLAB, while the state of charge determination is implemented in hardware and the Kalman estimation done using Python. The system is modelled on an electric two-wheeler platform and the testing is done to compare the state of charge accuracy of the open circuit voltage method, the Coulomb counting method and the Kalman filter-based estimation approach. The inclusion of the vibrational heat analysis for State of Charge estimation in the hardware testing of the electric two-wheeler provides an accurate state of charge value. [ABSTRACT FROM AUTHOR]

In order to suppress leakage current caused in the traditional multi-cells series Li-ion battery pack protection system, a new battery voltage transfer method is presented in this paper, which uses the current generated in the transfer process of one of the batteries to compensate for the leakage of itself and other cells except the top cell. Based on the 0.18 µm Bipolar and CMOS and DMOS technology, this proposed circuit has been integrated into a 7-cells Li-ion battery charge and discharge protection chip successfully. The experimental results of cell balancing confirm that the balancing algorithm can help with the shortage of the voltage transfer circuit. Furthermore, analysis of 20 samples shows that the new method can greatly suppress the battery leakage. Compared with the traditional solution, the voltage transfer circuit proposed in this paper greatly reduces the leakage current, which helps to extend the service life of the battery. [ABSTRACT FROM AUTHOR]