Search

Background: Global estimates for cholera annually approximate 4 million cases worldwide with 95,000 deaths. Recent outbreaks, including Haiti and Yemen, are reminders that cholera is still a global health concern. Cholera outbreaks can rapidly induce high death tolls by overwhelming the capacity of health facilities, especially in remote areas or areas of civil unrest. Recent studies demonstrated that stool specimens preserved on filter paper facilitate molecular analysis of Vibrio cholerae in resource limited settings. Specimens preserved in a rapid, low-cost, safe and sustainable manner for sequencing provides previously unavailable data about circulating cholera strains. This may ultimately provide new information to shape public policy response on cholera control and elimination. Methodology/Principal findings: Whole genome sequencing (WGS) recovered close to a complete sequence of the V. cholerae O1 genome with satisfactory genome coverage from stool specimens enriched in alkaline peptone water (APW) and V. cholerae culture isolates, both spotted on filter paper. The minimum concentration of V. cholerae DNA sufficient to produce quality genomic information was 0.02 ng/μL. The genomic data confirmed the presence or absence of genes of epidemiological interest, including cholera toxin and pilus loci. WGS identified a variety of diarrheal pathogens from APW-enriched specimen spotted filter paper, highlighting the potential for this technique to explore the gut microbiome, potentially identifying co-infections, which may impact the severity of disease. WGS demonstrated that these specimens fit within the current global cholera phylogenetic tree, identifying the strains as the 7th pandemic El Tor. Conclusions: WGS results allowed for mapping of short reads from APW-enriched specimen and culture isolate spotted filter papers this provided valuable molecular epidemiological sequence information on V. cholerae strains from remote, low-resource settings. These results identified the presence of co-infecting pathogens while providing rare insight into the specific V. cholerae strains causing outbreaks in cholera-endemic areas. [ABSTRACT FROM AUTHOR]

Developing new software tools for analysis of large-scale biological data is a key component of advancing modern biomedical research. Scientific reproduction of published findings requires running computational tools on data generated by such studies, yet little attention is presently allocated to the installability and archival stability of computational software tools. Scientific journals require data and code sharing, but none currently require authors to guarantee the continuing functionality of newly published tools. We have estimated the archival stability of computational biology software tools by performing an empirical analysis of the internet presence for 36,702 omics software resources published from 2005 to 2017. We found that almost 28% of all resources are currently not accessible through uniform resource locators (URLs) published in the paper they first appeared in. Among the 98 software tools selected for our installability test, 51% were deemed “easy to install,” and 28% of the tools failed to be installed at all because of problems in the implementation. Moreover, for papers introducing new software, we found that the number of citations significantly increased when authors provided an easy installation process. We propose for incorporation into journal policy several practical solutions for increasing the widespread installability and archival stability of published bioinformatics software. [ABSTRACT FROM AUTHOR]

In recent years, the explosion of genomic data and bioinformatic tools has been accompanied by a growing conversation around reproducibility of results and usability of software. However, the actual state of the body of bioinformatics software remains largely unknown. The purpose of this paper is to investigate the state of source code in the bioinformatics community, specifically looking at relationships between code properties, development activity, developer communities, and software impact. To investigate these issues, we curated a list of 1,720 bioinformatics repositories on GitHub through their mention in peer-reviewed bioinformatics articles. Additionally, we included 23 high-profile repositories identified by their popularity in an online bioinformatics forum. We analyzed repository metadata, source code, development activity, and team dynamics using data made available publicly through the GitHub API, as well as article metadata. We found key relationships within our dataset, including: certain scientific topics are associated with more active code development and higher community interest in the repository; most of the code in the main dataset is written in dynamically typed languages, while most of the code in the high-profile set is statically typed; developer team size is associated with community engagement and high-profile repositories have larger teams; the proportion of female contributors decreases for high-profile repositories and with seniority level in author lists; and, multiple measures of project impact are associated with the simple variable of whether the code was modified at all after paper publication. In addition to providing the first large-scale analysis of bioinformatics code to our knowledge, our work will enable future analysis through publicly available data, code, and methods. Code to generate the dataset and reproduce the analysis is provided under the MIT license at . Data are available at . [ABSTRACT FROM AUTHOR]

This paper presents a bibliographic analysis of Nature articles based on altmetrics. We assess the concern degree of social users on the Nature articles through the coverage analysis of Twitter and Facebook by publication year and discipline. The social media impact of a Nature article is examined by evaluating the mention rates on Twitter and on Facebook. Moreover, the correlation between tweets and citations is analyzed by publication year, discipline and Twitter user type to explore factors affecting the correlation. The results show that Twitter users have a higher concern degree on Nature articles than Facebook users, and Nature articles have higher and faster-growing impact on Twitter than on Facebook. The results also show that tweets and citations are somewhat related, and they mostly measure different types of impact. In addition, the correlation between tweets and citations highly depends on publication year, discipline and Twitter user type. [ABSTRACT FROM AUTHOR]

To solve the problem of the deadline-constrained task scheduling in the cloud computing system, this paper proposes a deadline-constrained scheduling algorithm for cloud computing based on the driver of dynamic essential path (Deadline-DDEP). According to the changes of the dynamic essential path of each task node in the scheduling process, the dynamic sub-deadline strategy is proposed. The strategy assigns different sub-deadline values to every task node to meet the constraint relations among task nodes and the user’s defined deadline. The strategy fully considers the dynamic sub-deadline affected by the dynamic essential path of task node in the scheduling process. The paper proposed the quality assessment of optimization cost strategy to solve the problem of selecting server for each task node. Based on the sub-deadline urgency and the relative execution cost in the scheduling process, the strategy selects the server that not only meets the sub-deadline but also obtains much lower execution cost. In this way, the proposed algorithm will make the task graph complete within its deadline, and minimize its total execution cost. Finally, we demonstrate the proposed algorithm via the simulation experiments using Matlab tools. The experimental results show that, the proposed algorithm produces remarkable performance improvement rate on the total execution cost that ranges between 10.3% and 30.8% under meeting the deadline constraint. In view of the experimental results, the proposed algorithm provides better-quality scheduling solution that is suitable for scientific application task execution in the cloud computing environment than IC-PCP, DCCP and CD-PCP. [ABSTRACT FROM AUTHOR]

For high-dimensional and massive data sets, traditional centralized gene expression programming (GEP) or improved algorithms lead to increased run-time and decreased prediction accuracy. To solve this problem, this paper proposes a new improved algorithm called distributed function mining for gene expression programming based on fast reduction (DFMGEP-FR). In DFMGEP-FR, fast attribution reduction in binary search algorithms (FAR-BSA) is proposed to quickly find the optimal attribution set, and the function consistency replacement algorithm is given to solve integration of the local function model. Thorough comparative experiments for DFMGEP-FR, centralized GEP and the parallel gene expression programming algorithm based on simulated annealing (parallel GEPSA) are included in this paper. For the waveform, mushroom, connect-4 and musk datasets, the comparative results show that the average time-consumption of DFMGEP-FR drops by 89.09%%, 88.85%, 85.79% and 93.06%, respectively, in contrast to centralized GEP and by 12.5%, 8.42%, 9.62% and 13.75%, respectively, compared with parallel GEPSA. Six well-studied UCI test data sets demonstrate the efficiency and capability of our proposed DFMGEP-FR algorithm for distributed function mining. [ABSTRACT FROM AUTHOR]

The dispatching of hydro-thermal system is a nonlinear programming problem with multiple constraints and high dimensions and the solution techniques of the model have been a hotspot in research. Based on the advantage of that the artificial bee colony algorithm (ABC) can efficiently solve the high-dimensional problem, an improved artificial bee colony algorithm has been proposed to solve DHTS problem in this paper. The improvements of the proposed algorithm include two aspects. On one hand, local search can be guided in efficiency by the information of the global optimal solution and its gradient in each generation. The global optimal solution improves the search efficiency of the algorithm but loses diversity, while the gradient can weaken the loss of diversity caused by the global optimal solution. On the other hand, inspired by genetic algorithm, the nectar resource which has not been updated in limit generation is transformed to a new one by using selection, crossover and mutation, which can ensure individual diversity and make full use of prior information for improving the global search ability of the algorithm. The two improvements of ABC algorithm are proved to be effective via a classical numeral example at last. Among which the genetic operator for the promotion of the ABC algorithm’s performance is significant. The results are also compared with those of other state-of-the-art algorithms, the enhanced ABC algorithm has general advantages in minimum cost, average cost and maximum cost which shows its usability and effectiveness. The achievements in this paper provide a new method for solving the DHTS problems, and also offer a novel reference for the improvement of mechanism and the application of algorithms. [ABSTRACT FROM AUTHOR]

Budding yeast, which undergoes polarized growth during budding and mating, has been a useful model system to study cell polarization. Bud sites are selected differently in haploid and diploid yeast cells: haploid cells bud in an axial manner, while diploid cells bud in a bipolar manner. While previous studies have been focused on the molecular details of the bud site selection and polarity establishment, not much is known about how different budding patterns give rise to different functions at the population level. In this paper, we develop a two-dimensional agent-based model to study budding yeast colonies with cell-type specific biological processes, such as budding, mating, mating type switch, consumption of nutrients, and cell death. The model demonstrates that the axial budding pattern enhances mating probability at an early stage and the bipolar budding pattern improves colony development under nutrient limitation. Our results suggest that the frequency of mating type switch might control the trade-off between diploidization and inbreeding. The effect of cellular aging is also studied through our model. Based on the simulations, colonies initiated by an aged haploid cell show declined mating probability at an early stage and recover as the rejuvenated offsprings become the majority. Colonies initiated with aged diploid cells do not show disadvantage in colony expansion possibly due to the fact that young cells contribute the most to colony expansion. [ABSTRACT FROM AUTHOR]

The interaction between phenotypic plasticity, e.g. learning, and evolution is an important topic both in Evolutionary Biology and Machine Learning. The evolution of learning is commonly studied in Evolutionary Biology, while the use of an evolutionary process to improve learning is of interest to the field of Machine Learning. This paper takes a different point of view by studying the effect of learning on the evolutionary process, the so-called Baldwin effect. A well-studied result in the literature about the Baldwin effect is that learning affects the speed of convergence of the evolutionary process towards some genetic configuration, which corresponds to the environment-induced plastic response. This paper demonstrates that learning can change the outcome of evolution, i.e., lead to a genetic configuration that does not correspond to the plastic response. Results are obtained both analytically and experimentally by means of an agent-based model of a foraging task, in an environment where the distribution of resources follows seasonal cycles and the foraging success on different resource types is conditioned by trade-offs that can be evolved and learned. This paper attempts to answer a question that has been overlooked: whether learning has an effect on what genotypic traits are evolved, i.e. the selection of a trait that enables a plastic response changes the selection pressure on a different trait, in what could be described as co-evolution between different traits in the same genome. [ABSTRACT FROM AUTHOR]

Computational modeling of engineered gene circuits is an important while challenged task in systems biology. In order to describe and predict the response behaviors of genetic circuits using reliable model parameters, this paper applies an optimal experimental design(OED) method to obtain input signals. In order to obtain informative observations, this study focuses on maximizing Fisher information matrix(FIM)-based optimal criteria and to provide optimal inputs. Furthermore, this paper designs a two-stage optimization with the modified E-optimal criteria and applies harmony search(HS)-based OED algorithm to minimize estimation errors. The proposed optimal identification methodology involves estimation errors and the sample size to pursue a trade-off between estimation accuracy and measurement cost in modeling gene networks. The designed cost function takes two major factors into account, in which experimental costs are proportional to the number of time points. Experiments select two types of synthetic genetic networks to validate the effectiveness of the proposed HS-OED approach. Identification outcomes and analysis indicate the proposed HS-OED method outperforms two candidate OED approaches, with reduced computational effort. [ABSTRACT FROM AUTHOR]

Understanding expression levels of proteins and their interactions is a key factor to diagnose and explain the Down syndrome which can be considered as the most prevalent reason of intellectual disability in human beings. In the previous studies, the expression levels of 77 proteins obtained from normal genotype control mice and from trisomic Ts65Dn mice have been analyzed after training in contextual fear conditioning with and without injection of the memantine drug using statistical methods and machine learning techniques. Recent studies have also pointed out that there may be a linkage between the Down syndrome and the immune system. Thus, the research presented in this paper aim at in silico identification of proteins which are significant to the learning process and the immune system and to derive the most accurate model for classification of mice. In this paper, the features are selected by implementing forward feature selection method after preprocessing step of the dataset. Later, deep neural network, gradient boosting tree, support vector machine and random forest classification methods are implemented to identify the accuracy. It is observed that the selected feature subsets not only yield higher accuracy classification results but also are composed of protein responses which are important for the learning and memory process and the immune system. [ABSTRACT FROM AUTHOR]

Metabolic models can estimate intrinsic product yields for microbial factories, but such frameworks struggle to predict cell performance (including product titer or rate) under suboptimal metabolism and complex bioprocess conditions. On the other hand, machine learning, complementary to metabolic modeling necessitates large amounts of data. Building such a database for metabolic engineering designs requires significant manpower and is prone to human errors and bias. We propose an approach to integrate data-driven methods with genome scale metabolic model for assessment of microbial bio-production (yield, titer and rate). Using engineered E. coli as an example, we manually extracted and curated a data set comprising about 1200 experimentally realized cell factories from ~100 papers. We furthermore augmented the key design features (e.g., genetic modifications and bioprocess variables) extracted from literature with additional features derived from running the genome-scale metabolic model iML1515 simulations with constraints that match the experimental data. Then, data augmentation and ensemble learning (e.g., support vector machines, gradient boosted trees, and neural networks in a stacked regressor model) are employed to alleviate the challenges of sparse, non-standardized, and incomplete data sets, while multiple correspondence analysis/principal component analysis are used to rank influential factors on bio-production. The hybrid framework demonstrates a reasonably high cross-validation accuracy for prediction of E.coli factory performance metrics under presumed bioprocess and pathway conditions (Pearson correlation coefficients between 0.8 and 0.93 on new data not seen by the model). [ABSTRACT FROM AUTHOR]

Genetic maps order genetic markers along chromosomes. They are, for instance, extensively used in marker-assisted selection to accelerate breeding programs. Even for the same species, people often have to deal with several alternative maps obtained using different ordering methods or different datasets, e.g. resulting from different segregating populations. Having efficient tools to identify the consistency and discrepancy of alternative maps is thus essential to facilitate genetic map comparisons. We propose to encode genetic maps by bucket order, a kind of order, which takes into account the blurred parts of the marker order while being an efficient data structure to achieve low complexity algorithms. The main result of this paper is an O(n log(n)) procedure to identify the largest agreements between two bucket orders of n elements, their Longest Common Subsequence (LCS), providing an efficient solution to highlight discrepancies between two genetic maps. The LCS of two maps, being the largest set of their collinear markers, is used as a building block to compute pairwise map congruence, to visually emphasize maker collinearity and in some scaffolding methods relying on genetic maps to improve genome assembly. As the LCS computation is a key subroutine of all these genetic map related tools, replacing the current LCS subroutine of those methods by ours –to do the exact same work but faster– could significantly speed up those methods without changing their accuracy. To ease such transition we provide all required algorithmic details in this self contained paper as well as an R package implementing them, named LCSLCIS, which is freely available at: . [ABSTRACT FROM AUTHOR]

Penalized selection criteria like AIC or BIC are among the most popular methods for variable selection. Their theoretical properties have been studied intensively and are well understood, but making use of them in case of high-dimensional data is difficult due to the non-convex optimization problem induced by L0 penalties. In this paper we introduce an adaptive ridge procedure (AR), where iteratively weighted ridge problems are solved whose weights are updated in such a way that the procedure converges towards selection with L0 penalties. After introducing AR its specific shrinkage properties are studied in the particular case of orthogonal linear regression. Based on extensive simulations for the non-orthogonal case as well as for Poisson regression the performance of AR is studied and compared with SCAD and adaptive LASSO. Furthermore an efficient implementation of AR in the context of least-squares segmentation is presented. The paper ends with an illustrative example of applying AR to analyze GWAS data. [ABSTRACT FROM AUTHOR]

Feature selection and classification are the main topics in microarray data analysis. Although many feature selection methods have been proposed and developed in this field, SVM-RFE (Support Vector Machine based on Recursive Feature Elimination) is proved as one of the best feature selection methods, which ranks the features (genes) by training support vector machine classification model and selects key genes combining with recursive feature elimination strategy. The principal drawback of SVM-RFE is the huge time consumption. To overcome this limitation, we introduce a more efficient implementation of linear support vector machines and improve the recursive feature elimination strategy and then combine them together to select informative genes. Besides, we propose a simple resampling method to preprocess the datasets, which makes the information distribution of different kinds of samples balanced and the classification results more credible. Moreover, the applicability of four common classifiers is also studied in this paper. Extensive experiments are conducted on six most frequently used microarray datasets in this field, and the results show that the proposed methods have not only reduced the time consumption greatly but also obtained comparable classification performance. [ABSTRACT FROM AUTHOR]

In this paper we compare systematically the most promising neuroevolutionary methods and two new original methods on the double-pole balancing problem with respect to: the ability to discover solutions that are robust to variations of the environment, the speed with which such solutions are found, and the ability to scale-up to more complex versions of the problem. The results indicate that the two original methods introduced in this paper and the Exponential Natural Evolutionary Strategy method largely outperform the other methods with respect to all considered criteria. The results collected in different experimental conditions also reveal the importance of regulating the selective pressure and the importance of exposing evolving agents to variable environmental conditions. The data collected and the results of the comparisons are used to identify the most effective methods and the most promising research directions. [ABSTRACT FROM AUTHOR]

This work presents optimal linear quadratic regulator (LQR) based on genetic algorithm (GA) to solve the two degrees of freedom (2 DoF) motion control problem in head seas for wave piercing catamarans (WPC). The proposed LQR based GA control strategy is to select optimal weighting matrices (Q and R). The seakeeping performance of WPC based on proposed algorithm is challenged because of multi-input multi-output (MIMO) system of uncertain coefficient problems. Besides the kinematical constraint problems of WPC, the external conditions must be considered, like the sea disturbance and the actuators (a T-foil and two flaps) control. Moreover, this paper describes the MATLAB and LabVIEW software plats to simulate the reduction effects of WPC. Finally, the real-time (RT) NI CompactRIO embedded controller is selected to test the effectiveness of the actuators based on proposed techniques. In conclusion, simulation and experimental results prove the correctness of the proposed algorithm. The percentage of heave and pitch reductions are more than 18% in different high speeds and bad sea conditions. And the results also verify the feasibility of NI CompactRIO embedded controller. [ABSTRACT FROM AUTHOR]

The automatic generation of test cases oriented paths in an effective manner is a challenging problem for structural testing of software. The use of search-based optimization methods, such as genetic algorithms (GAs), has been proposed to handle this problem. This paper proposes an improved adaptive genetic algorithm (IAGA) for test cases generation by maintaining population diversity. It uses adaptive crossover rate and mutation rate in dynamic adjustment according to the differences between individual similarity and fitness values, which enhances the exploitation of searching global optimum. This novel approach is experimented and tested on a benchmark and six industrial programs. The experimental results confirm that the proposed method is efficient in generating test cases for path coverage. [ABSTRACT FROM AUTHOR]

Collaborative beamforming (CBF) with a finite number of collaborating nodes (CNs) produces sidelobes that are highly dependent on the collaborating nodes’ locations. The sidelobes cause interference and affect the communication rate of unintended receivers located within the transmission range. Nulling is not possible in an open-loop CBF since the collaborating nodes are unable to receive feedback from the receivers. Hence, the overall sidelobe reduction is required to avoid interference in the directions of the unintended receivers. However, the impact of sidelobe reduction on the capacity improvement at the unintended receiver has never been reported in previous works. In this paper, the effect of peak sidelobe (PSL) reduction in CBF on the capacity of an unintended receiver is analyzed. Three meta-heuristic optimization methods are applied to perform PSL minimization, namely genetic algorithm (GA), particle swarm algorithm (PSO) and a simplified version of the PSO called the weightless swarm algorithm (WSA). An average reduction of 20 dB in PSL alongside 162% capacity improvement is achieved in the worst case scenario with the WSA optimization. It is discovered that the PSL minimization in the CBF provides capacity improvement at an unintended receiver only if the CBF cluster is small and dense. [ABSTRACT FROM AUTHOR]

Combinatorial test design is a plan of test that aims to reduce the amount of test cases systematically by choosing a subset of the test cases based on the combination of input variables. The subset covers all possible combinations of a given strength and hence tries to match the effectiveness of the exhaustive set. This mechanism of reduction has been used successfully in software testing research with t-way testing (where t indicates the interaction strength of combinations). Potentially, other systems may exhibit many similarities with this approach. Hence, it could form an emerging application in different areas of research due to its usefulness. To this end, more recently it has been applied in a few research areas successfully. In this paper, we explore the applicability of combinatorial test design technique for Fractional Order (FO), Proportional-Integral-Derivative (PID) parameter design controller, named as FOPID, for an automatic voltage regulator (AVR) system. Throughout the paper, we justify this new application theoretically and practically through simulations. In addition, we report on first experiments indicating its practical use in this field. We design different algorithms and adapted other strategies to cover all the combinations with an optimum and effective test set. Our findings indicate that combinatorial test design can find the combinations that lead to optimum design. Besides this, we also found that by increasing the strength of combination, we can approach to the optimum design in a way that with only 4-way combinatorial set, we can get the effectiveness of an exhaustive test set. This significantly reduced the number of tests needed and thus leads to an approach that optimizes design of parameters quickly. [ABSTRACT FROM AUTHOR]

In this paper we apply machine learning methods for predicting protein interactions in fungal secretion pathways. We assume an inter-species transfer setting, where training data is obtained from a single species and the objective is to predict protein interactions in other, related species. In our methodology, we combine several state of the art machine learning approaches, namely, multiple kernel learning (MKL), pairwise kernels and kernelized structured output prediction in the supervised graph inference framework. For MKL, we apply recently proposed centered kernel alignment and p-norm path following approaches to integrate several feature sets describing the proteins, demonstrating improved performance. For graph inference, we apply input-output kernel regression (IOKR) in supervised and semi-supervised modes as well as output kernel trees (OK3). In our experiments simulating increasing genetic distance, Input-Output Kernel Regression proved to be the most robust prediction approach. We also show that the MKL approaches improve the predictions compared to uniform combination of the kernels. We evaluate the methods on the task of predicting protein-protein-interactions in the secretion pathways in fungi, S.cerevisiae, baker’s yeast, being the source, T. reesei being the target of the inter-species transfer learning. We identify completely novel candidate secretion proteins conserved in filamentous fungi. These proteins could contribute to their unique secretion capabilities. [ABSTRACT FROM AUTHOR]

As a result of the greatly increased use of mobile devices, the disadvantages of portable devices have gradually begun to emerge. To solve these problems, the use of mobile cloud computing assisted by cloud data centers has been proposed. However, cloud data centers are always very far from the mobile requesters. In this paper, we propose an improved multi-objective local mobile cloud model: Compounded Local Mobile Cloud Architecture with Dynamic Priority Queues (LMCpri). This new architecture could briefly store jobs that arrive simultaneously at the cloudlet in different priority positions according to the result of auction processing, and then execute partitioning tasks on capable helpers. In the Scheduling Module, NSGA-II is employed as the scheduling algorithm to shorten processing time and decrease requester cost relative to PSO and sequential scheduling. The simulation results show that the number of iteration times that is defined to 30 is the best choice of the system. In addition, comparing with LMCque, LMCpri is able to effectively accommodate a requester who would like his job to be executed in advance and shorten execution time. Finally, we make a comparing experiment between LMCpri and cloud assisting architecture, and the results reveal that LMCpri presents a better performance advantage than cloud assisting architecture. [ABSTRACT FROM AUTHOR]

The mitochondrion is the power plant of the eukaryotic cell, and tRNAs are the fundamental components of its translational machinery. In the present paper, the evolution of mitochondrial tRNAs was investigated in the Cetacea, a clade of Cetartiodactyla that retuned to water and thus had to adapt its metabolism to a different medium than that of its mainland ancestors. Our analysis focussed on identifying the factors that influenced the evolution of Cetacea tRNA double-helix elements, which play a pivotal role in the formation of the secondary and tertiary structures of each tRNA and consequently manipulate the whole translation machinery of the mitochondrion. Our analyses showed that the substitution pathways in the stems of different tRNAs were influenced by various factors, determining a molecular evolution that was unique to each of the 22 tRNAs. Our data suggested that the composition, AT-skew, and GC-skew of the tRNA stems were the main factors influencing the substitution process. In particular, the range of variation and the fluctuation of these parameters affected the fate of single tRNAs. Strong heterogeneity was observed among the different species of Cetacea. Finally, it appears that the evolution of mitochondrial tRNAs was also shaped by the environments in which the Cetacean taxa differentiated. This latter effect was particularly evident in toothed whales that either live in freshwater or are deep divers. [ABSTRACT FROM AUTHOR]

The identification of a subset of genes having the ability to capture the necessary information to distinguish classes of patients is crucial in bioinformatics applications. Ensemble and bagging methods have been shown to work effectively in the process of gene selection and classification. Testament to that is random forest which combines random decision trees with bagging to improve overall feature selection and classification accuracy. Surprisingly, the adoption of these methods in support vector machines has only recently received attention but mostly on classification not gene selection. This paper introduces an ensemble SVM-Recursive Feature Elimination (ESVM-RFE) for gene selection that follows the concepts of ensemble and bagging used in random forest but adopts the backward elimination strategy which is the rationale of RFE algorithm. The rationale behind this is, building ensemble SVM models using randomly drawn bootstrap samples from the training set, will produce different feature rankings which will be subsequently aggregated as one feature ranking. As a result, the decision for elimination of features is based upon the ranking of multiple SVM models instead of choosing one particular model. Moreover, this approach will address the problem of imbalanced datasets by constructing a nearly balanced bootstrap sample. Our experiments show that ESVM-RFE for gene selection substantially increased the classification performance on five microarray datasets compared to state-of-the-art methods. Experiments on the childhood leukaemia dataset show that an average 9% better accuracy is achieved by ESVM-RFE over SVM-RFE, and 5% over random forest based approach. The selected genes by the ESVM-RFE algorithm were further explored with Singular Value Decomposition (SVD) which reveals significant clusters with the selected data. [ABSTRACT FROM AUTHOR]

Swarming behavior is common in biology, from cell colonies to insect swarms and bird flocks. However, the conditions leading to the emergence of such behavior are still subject to research. Since Reynolds’ boids, many artificial models have reproduced swarming behavior, focusing on details ranging from obstacle avoidance to the introduction of fixed leaders. This paper presents a model of evolved artificial agents, able to develop swarming using only their ability to listen to each other’s signals. The model simulates a population of agents looking for a vital resource they cannot directly detect, in a 3D environment. Instead of a centralized algorithm, each agent is controlled by an artificial neural network, whose weights are encoded in a genotype and adapted by an original asynchronous genetic algorithm. The results demonstrate that agents progressively evolve the ability to use the information exchanged between each other via signaling to establish temporary leader-follower relations. These relations allow agents to form swarming patterns, emerging as a transient behavior that improves the agents’ ability to forage for the resource. Once they have acquired the ability to swarm, the individuals are able to outperform the non-swarmers at finding the resource. The population hence reaches a neutral evolutionary space which leads to a genetic drift of the genotypes. This reductionist approach to signal-based swarming not only contributes to shed light on the minimal conditions for the evolution of a swarming behavior, but also more generally it exemplifies the effect communication can have on optimal search patterns in collective groups of individuals. [ABSTRACT FROM AUTHOR]

Cancer driver genes, i.e., oncogenes and tumor suppressor genes, are involved in the acquisition of important functions in tumors, providing a selective growth advantage, allowing uncontrolled proliferation and avoiding apoptosis. It is therefore important to identify these driver genes, both for the fundamental understanding of cancer and to help finding new therapeutic targets or biomarkers. Although the most frequently mutated driver genes have been identified, it is believed that many more remain to be discovered, particularly for driver genes specific to some cancer types. In this paper, we propose a new computational method called LOTUS to predict new driver genes. LOTUS is a machine-learning based approach which allows to integrate various types of data in a versatile manner, including information about gene mutations and protein-protein interactions. In addition, LOTUS can predict cancer driver genes in a pan-cancer setting as well as for specific cancer types, using a multitask learning strategy to share information across cancer types. We empirically show that LOTUS outperforms five other state-of-the-art driver gene prediction methods, both in terms of intrinsic consistency and prediction accuracy, and provide predictions of new cancer genes across many cancer types. [ABSTRACT FROM AUTHOR]

The solution to the job shop scheduling problem (JSSP) is of great significance for improving resource utilization and production efficiency of enterprises. In this paper, in view of its non-deterministic polynomial properties, a multi-agent genetic algorithm based on tabu search (MAGATS) is proposed to solve JSSPs under makespan constraints. Firstly, a multi-agent genetic algorithm (MAGA) is proposed. During the process, a multi-agent grid environment is constructed based on characteristics of multi-agent systems and genetic algorithm (GA), and a corresponding neighbor interaction operator, a mutation operator based on neighborhood structure and a self-learning operator are designed. Then, combining tabu search algorithm with a MAGA, the algorithm MAGATS are presented. Finally, 43 benchmark instances are tested with the new algorithm. Compared with four other algorithms, the optimization performance of it is analyzed based on obtained test results. Effectiveness of the new algorithm is verified by analysis results. [ABSTRACT FROM AUTHOR]

The analyses of large volumes of metagenomic data extracted from aggregate populations of microscopic organisms residing on and in the human body are advancing contemporary understandings of the integrated participation of microbes in human health and disease. Next generation sequencing technology facilitates said analyses in terms of diversity, community composition, and differential abundance by filtering and binning microbial 16S rRNA genes extracted from human tissues into operational taxonomic units. However, current statistical tools restrict study designs to investigations of limited numbers of host characteristics mediated by limited numbers of samples potentially yielding a loss of relevant information. This paper presents a Bayesian hierarchical negative binomial model as an efficient technique capable of compensating for multivariable sets including tens or hundreds of host characteristics as covariates further expanding analyses of human microbiome count data. Simulation studies reveal that the Bayesian hierarchical negative binomial model provides a desirable strategy by often outperforming three competing negative binomial model in terms of type I error while simultaneously maintaining consistent power. An application of the Bayesian hierarchical negative binomial model using subsets of the open data published by the American Gut Project demonstrates an ability to identify operational taxonomic units significantly differentiable among persons diagnosed by a medical professional with either inflammatory bowel disease or irritable bowel syndrome that are consistent with contemporary gastrointestinal literature. [ABSTRACT FROM AUTHOR]

Our understanding of how chromosomes structurally organize and dynamically interact has been revolutionized through the lens of long-chain polymer physics. Major protein contributors to chromosome structure and dynamics are condensin and cohesin that stochastically generate loops within and between chains, and entrap proximal strands of sister chromatids. In this paper, we explore the ability of transient, protein-mediated, gene-gene crosslinks to induce clusters of genes, thereby dynamic architecture, within the highly repeated ribosomal DNA that comprises the nucleolus of budding yeast. We implement three approaches: live cell microscopy; computational modeling of the full genome during G1 in budding yeast, exploring four decades of timescales for transient crosslinks between 5kbp domains (genes) in the nucleolus on Chromosome XII; and, temporal network models with automated community (cluster) detection algorithms applied to the full range of 4D modeling datasets. The data analysis tools detect and track gene clusters, their size, number, persistence time, and their plasticity (deformation). Of biological significance, our analysis reveals an optimal mean crosslink lifetime that promotes pairwise and cluster gene interactions through “flexible” clustering. In this state, large gene clusters self-assemble yet frequently interact (merge and separate), marked by gene exchanges between clusters, which in turn maximizes global gene interactions in the nucleolus. This regime stands between two limiting cases each with far less global gene interactions: with shorter crosslink lifetimes, “rigid” clustering emerges with clusters that interact infrequently; with longer crosslink lifetimes, there is a dissolution of clusters. These observations are compared with imaging experiments on a normal yeast strain and two condensin-modified mutant cell strains. We apply the same image analysis pipeline to the experimental and simulated datasets, providing support for the modeling predictions. [ABSTRACT FROM AUTHOR]

The development of high-throughput sequencing technologies for 16S rRNA gene profiling provides higher quality compositional data for microbe communities. Inferring the direct interaction network under a specific condition and understanding how the network structure changes between two different environmental or genetic conditions are two important topics in biological studies. However, the compositional nature and high dimensionality of the data are challenging in the context of network and differential network recovery. To address this problem in the present paper, we proposed two new loss functions to incorporate the data transformations developed for compositional data analysis into D-trace loss for network and differential network estimation, respectively. The sparse matrix estimators are defined as the minimizer of the corresponding lasso penalized loss. Our method is characterized by its straightforward application based on the ADMM algorithm for numerical solution. Simulations show that the proposed method outperforms other state-of-the-art methods in network and differential network inference under different scenarios. Finally, as an illustration, our method is applied to a mouse skin microbiome data. [ABSTRACT FROM AUTHOR]

In recent years, increasing associations between microRNAs (miRNAs) and human diseases have been identified. Based on accumulating biological data, many computational models for potential miRNA-disease associations inference have been developed, which saves time and expenditure on experimental studies, making great contributions to researching molecular mechanism of human diseases and developing new drugs for disease treatment. In this paper, we proposed a novel computational method named Ensemble of Decision Tree based MiRNA-Disease Association prediction (EDTMDA), which innovatively built a computational framework integrating ensemble learning and dimensionality reduction. For each miRNA-disease pair, the feature vector was extracted by calculating the statistical measures, graph theoretical measures, and matrix factorization results for the miRNA and disease, respectively. Then multiple base learnings were built to yield many decision trees (DTs) based on random selection of negative samples and miRNA/disease features. Particularly, Principal Components Analysis was applied to each base learning to reduce feature dimensionality and hence remove the noise or redundancy. Average strategy was adopted for these DTs to get final association scores between miRNAs and diseases. In model performance evaluation, EDTMDA showed AUC of 0.9309 in global leave-one-out cross validation (LOOCV) and AUC of 0.8524 in local LOOCV. Additionally, AUC of 0.9192+/-0.0009 in 5-fold cross validation proved the model’s reliability and stability. Furthermore, three types of case studies for four human diseases were implemented. As a result, 94% (Esophageal Neoplasms), 86% (Kidney Neoplasms), 96% (Breast Neoplasms) and 88% (Carcinoma Hepatocellular) of top 50 predicted miRNAs were confirmed by experimental evidences in literature. [ABSTRACT FROM AUTHOR]

The collection of immunoglobulin genes in an individual’s germline, which gives rise to B cell receptors via recombination, is known to vary significantly across individuals. In humans, for example, each individual has only a fraction of the several hundred known V alleles. Furthermore, the currently-accepted set of known V alleles is both incomplete (particularly for non-European samples), and contains a significant number of spurious alleles. The resulting uncertainty as to which immunoglobulin alleles are present in any given sample results in inaccurate B cell receptor sequence annotations, and in particular inaccurate inferred naive ancestors. In this paper we first show that the currently widespread practice of aligning each sequence to its closest match in the full set of IMGT alleles results in a very large number of spurious alleles that are not in the sample’s true set of germline V alleles. We then describe a new method for inferring each individual’s germline gene set from deep sequencing data, and show that it improves upon existing methods by making a detailed comparison on a variety of simulated and real data samples. This new method has been integrated into the partis annotation and clonal family inference package, available at , and is run by default without affecting overall run time. [ABSTRACT FROM AUTHOR]

Motivation: Disease progression originates from the concept that an individual disease may go through different changes as it evolves, and such changes can cause new diseases. It is important to find a progression between diseases since knowing the prior-posterior relationship beforehand can prevent further complications or evolutions to other diseases. Furthermore, the series of progressions can be represented in the form of a chain, which enables us to readily infer successive influences from one disease to another after many passages through other diseases. Methods: In this paper, we propose a systematic approach for finding a disease progression chain from a source disease to a target one via exploring a disease network. The network is constructed based on various sets of biomedical data. To find the most influential progression chains, the k-shortest path search algorithm is employed. The most representative algorithms such as A*, Dijkstra, and Yen’s are incorporated into the proposed method. Results: A disease network consisting of 3,302 diseases was constructed based on four sources of biomedical data: disease-protein relations, biological pathways, clinical history, and biomedical literature information. The last three sets of data contain prior-posterior information, and they endow directionality on the edges of the network. The results were interesting and informative: for example, when colitis and respiratory insufficiency were set as a source disease and a target one, respectively, five progression chains were found within several seconds (when k = 5). Each chain was provided with a progression score, which indicates the strength of plausibility relative to others. Similarly, the proposed method can be expanded to any pair of source-target diseases in the network. This can be utilized as a preliminary tool for inferring complications or progressions between diseases. [ABSTRACT FROM AUTHOR]

A thorough understanding of the heritability, genetic correlations and additive and non-additive variance components of tree growth and wood properties is a requisite for effective tree breeding. This knowledge is essential to maximize genetic gain, that is, the amount of increase in trait performance achieved annually through directional selection. Understanding the genetic attributes of traits targeted by breeding is also important to sustain decade-long genetic progress, that is, the progress made by increasing the average genetic value of the offspring as compared to that of the parental generation. In this study, we report quantitative genetic parameters for fifteen growth, wood chemical and physical traits for the world-famous Eucalyptus urograndis hybrid (E. grandis × E. urophylla). These traits directly impact the optimal use of wood for cellulose pulp, paper, and energy production. A population of 1,000 trees sampled in a progeny trial was phenotyped directly or following the development and use of near-infrared spectroscopy calibration models. Trees were genotyped with 33,398 SNPs and 24,001 DArT-seq genome-wide markers and genomic realized relationship matrices (GRM) were used for parameter estimation with an individual-tree additive-dominant mixed model. Wood chemical properties and wood density showed stronger genetic control than growth, cellulose and fiber traits. Additive effects are the main drivers of genetic variation for all traits, but dominance plays an equally or more important role for growth, singularly in this hybrid. GRM´s with >10,000 markers provided stable relationships estimates and more accurate parameters than pedigrees by capturing the full genetic relationships among individuals and disentangling the non-additive from the additive genetic component. Low correlations between growth and wood properties indicate that simultaneous selection for wood traits can be applied with minor effects on genetic gain for growth. Conversely, moderate to strong correlations between wood density and chemical traits exist, likely due to their interdependency on cell wall structure such that responses to selection will be connected for these traits. Our results illustrate the advantage of using genome-wide marker data to inform tree breeding in general and have important consequences for operational breeding of eucalypt urograndis hybrids. [ABSTRACT FROM AUTHOR]

Control problem in a biological system is the problem of finding an interventional policy for changing the state of the biological system from an undesirable state, e.g. disease, into a desirable healthy state. Boolean networks are utilized as a mathematical model for gene regulatory networks. This paper provides an algorithm to solve the control problem in Boolean networks. The proposed algorithm is implemented and applied on two biological systems: T-cell receptor network and Drosophila melanogaster network. Results show that the proposed algorithm works faster in solving the control problem over these networks, while having similar accuracy, in comparison to previous exact methods. Source code and a simple web service of the proposed algorithm is available at . [ABSTRACT FROM AUTHOR]

Due to continuous evolution of biomedical data, biomedical ontologies are becoming larger and more complex, which leads to the existence of many overlapping information. To support semantic inter-operability between ontology-based biomedical systems, it is necessary to identify the correspondences between these information, which is commonly known as biomedical ontology matching. However, it is a challenge to match biomedical ontologies, which dues to: (1) biomedical ontologies often possess tens of thousands of entities, (2) biomedical terminologies are complex and ambiguous. To efficiently match biomedical ontologies, in this paper, an interactive biomedical ontology matching approach is proposed, which utilizes the Evolutionary Algorithm (EA) to implement the automatic matching process, and gets a user involved in the evolving process to improve the matching efficiency. In particular, we propose an Evolutionary Tabu Search (ETS) algorithm, which can improve EA’s performance by introducing the tabu search algorithm as a local search strategy into the evolving process. On this basis, we further make the ETS-based ontology matching technique cooperate with the user in a reasonable amount of time to efficiently create high quality alignments, and make use of EA’s survival of the fittest to eliminate the wrong correspondences brought by erroneous user validations. The experiment is conducted on the Anatomy track and Large Biomedic track that are provided by the Ontology Alignment Evaluation Initiative (OAEI), and the experimental results show that our approach is able to efficiently exploit the user intervention to improve its non-interactive version, and the performance of our approach outperforms the state-of-the-art semi-automatic ontology matching systems. [ABSTRACT FROM AUTHOR]

Emerging evidence has shown microRNAs (miRNAs) play an important role in human disease research. Identifying potential association among them is significant for the development of pathology, diagnose and therapy. However, only a tiny portion of all miRNA-disease pairs in the current datasets are experimentally validated. This prompts the development of high-precision computational methods to predict real interaction pairs. In this paper, we propose a new model of Logistic Model Tree for predicting miRNA-Disease Association (LMTRDA) by fusing multi-source information including miRNA sequences, miRNA functional similarity, disease semantic similarity, and known miRNA-disease associations. In particular, we introduce miRNA sequence information and extract its features using natural language processing technique for the first time in the miRNA-disease prediction model. In the cross-validation experiment, LMTRDA obtained 90.51% prediction accuracy with 92.55% sensitivity at the AUC of 90.54% on the HMDD V3.0 dataset. To further evaluate the performance of LMTRDA, we compared it with different classifier and feature descriptor models. In addition, we also validate the predictive ability of LMTRDA in human diseases including Breast Neoplasms, Breast Neoplasms and Lymphoma. As a result, 28, 27 and 26 out of the top 30 miRNAs associated with these diseases were verified by experiments in different kinds of case studies. These experimental results demonstrate that LMTRDA is a reliable model for predicting the association among miRNAs and diseases. [ABSTRACT FROM AUTHOR]

Blocking cytokine interleukin 10 (IL-10) at the time of immunisation enhances vaccine induced T cell responses and improves control of tumour cell growth in vivo. However, the effect of an IL-10 blockade on the biological function of macrophages has not been explored. In the current paper, a macrophage precursor cell line, U937 cells, was selected to investigate the differential expression of proteins and relevant cell signalling pathway changes, when stimulated with lipopolysaccharide (LPS) in the presence of antibodies to IL-10 or IL-10 receptor. We used a quantitative proteomic strategy to investigate variations in protein profiles of U937 cells following the treatments with LPS, LPS plus human anti-IL10 antibody and anti-IL10R antibody in 24hrs, respectively. The LPS treatment significantly activated actin-related cell matrix formation and immune response pathways. The addition of anti-IL10 and anti-IL10R antibody further promoted the immune response and potentially effect macrophage survival through PI3K/AKT signalling; however, the latter appeared to also upregulated oncogene XRCC5 and Cajal body associated processes. [ABSTRACT FROM AUTHOR]

Robustly predicting outcome for cancer patients from gene expression is an important challenge on the road to better personalized treatment. Network-based outcome predictors (NOPs), which considers the cellular wiring diagram in the classification, hold much promise to improve performance, stability and interpretability of identified marker genes. Problematically, reports on the efficacy of NOPs are conflicting and for instance suggest that utilizing random networks performs on par to networks that describe biologically relevant interactions. In this paper we turn the prediction problem around: instead of using a given biological network in the NOP, we aim to identify the network of genes that truly improves outcome prediction. To this end, we propose SyNet, a gene network constructed ab initio from synergistic gene pairs derived from survival-labelled gene expression data. To obtain SyNet, we evaluate synergy for all 69 million pairwise combinations of genes resulting in a network that is specific to the dataset and phenotype under study and can be used to in a NOP model. We evaluated SyNet and 11 other networks on a compendium dataset of >4000 survival-labelled breast cancer samples. For this purpose, we used cross-study validation which more closely emulates real world application of these outcome predictors. We find that SyNet is the only network that truly improves performance, stability and interpretability in several existing NOPs. We show that SyNet overlaps significantly with existing gene networks, and can be confidently predicted (~85% AUC) from graph-topological descriptions of these networks, in particular the breast tissue-specific network. Due to its data-driven nature, SyNet is not biased to well-studied genes and thus facilitates post-hoc interpretation. We find that SyNet is highly enriched for known breast cancer genes and genes related to e.g. histological grade and tamoxifen resistance, suggestive of a role in determining breast cancer outcome. [ABSTRACT FROM AUTHOR]

N6-methyladenosine (m6A) is the most abundant methylation, existing in >25% of human mRNAs. Exciting recent discoveries indicate the close involvement of m6A in regulating many different aspects of mRNA metabolism and diseases like cancer. However, our current knowledge about how m6A levels are controlled and whether and how regulation of m6A levels of a specific gene can play a role in cancer and other diseases is mostly elusive. We propose in this paper a computational scheme for predicting m6A-regulated genes and m6A-associated disease, which includes Deep-m6A, the first model for detecting condition-specific m6A sites from MeRIP-Seq data with a single base resolution using deep learning and Hot-m6A, a new network-based pipeline that prioritizes functional significant m6A genes and its associated diseases using the Protein-Protein Interaction (PPI) and gene-disease heterogeneous networks. We applied Deep-m6A and this pipeline to 75 MeRIP-seq human samples, which produced a compact set of 709 functionally significant m6A-regulated genes and nine functionally enriched subnetworks. The functional enrichment analysis of these genes and networks reveal that m6A targets key genes of many critical biological processes including transcription, cell organization and transport, and cell proliferation and cancer-related pathways such as Wnt pathway. The m6A-associated disease analysis prioritized five significantly associated diseases including leukemia and renal cell carcinoma. These results demonstrate the power of our proposed computational scheme and provide new leads for understanding m6A regulatory functions and its roles in diseases. [ABSTRACT FROM AUTHOR]

Benthic foraminifera, and certainly symbiont-bearing (large) benthic foraminifera are generally considered to have large geographic ranges in combination with significant ecomorphological variation. With the advance of molecular phylogenetic approaches, supported or preceded by detailed morphological studies, it was demonstrated that this view needs to be reevaluated. In this paper I evaluate the morphology of five Marginopora populations from around the Coral Sea by microCT-scanning. I argue that ecomorphological and ontogenetic variation is smaller than geographic variation in morphology. This forms the basis for the description of three new species, M. santoensis nov. spec., M. charlottensis nov. spec., M. orpheusensis nov. spec. Quantitative morphological variation between M. rossi, M. orpheusensis nov. spec. and M. charlottensis nov. spec. is overlapping, but each species has unique morphological characters supporting recognition as new species. Support to distinguish the deep living (M. rossi, M. charlottensis nov. spec., M. orpheusensis nov. spec.) and shallow living (M. vertebralis) Marginopora populations as separate species is strong, but not enough molecular phylogenetic data are available to test the three new deep-living species on the Great Barrier Reef hypothesis. However, detailed understanding of ecophenotypic variation in M. santoensis nov. spec. supports the conclusion that it is unlikely that ecophenotypic variation can explain the morphological variation between the three species. I argue that the number of species in this genus is underestimated, and that there are at least five species in the Coral Sea area alone. [ABSTRACT FROM AUTHOR]

As sequencing prices drop, genomic data accumulates—seemingly at a steadily increasing pace. Most genomic data potentially have value beyond the initial purpose—but only if shared with the scientific community. This, of course, is often easier said than done. Some of the challenges in sharing genomic data include data volume (raw file sizes and number of files), complexities, formats, nomenclatures, metadata descriptions, and the choice of a repository. In this paper, we describe 10 quick tips for sharing open genomic data. [ABSTRACT FROM AUTHOR]

Butterfly monitoring and Red List programs in Switzerland rely on a combination of observations and collection records to document changes in species distributions through time. While most butterflies can be identified using morphology, some taxa remain challenging, making it difficult to accurately map their distributions and develop appropriate conservation measures. In this paper, we explore the use of the DNA barcode (a fragment of the mitochondrial gene COI) as a tool for the identification of Swiss butterflies and forester moths (Rhopalocera and Zygaenidae). We present a national DNA barcode reference library including 868 sequences representing 217 out of 224 resident species, or 96.9% of Swiss fauna. DNA barcodes were diagnostic for nearly 90% of Swiss species. The remaining 10% represent cases of para- and polyphyly likely involving introgression or incomplete lineage sorting among closely related taxa. We demonstrate that integrative taxonomic methods incorporating a combination of morphological and genetic techniques result in a rate of species identification of over 96% in females and over 98% in males, higher than either morphology or DNA barcodes alone. We explore the use of the DNA barcode for exploring boundaries among taxa, understanding the geographical distribution of cryptic diversity and evaluating the status of purportedly endemic taxa. Finally, we discuss how DNA barcodes may be used to improve field practices and ultimately enhance conservation strategies. [ABSTRACT FROM AUTHOR]

LncRNA-protein interactions play important roles in post-transcriptional gene regulation, poly-adenylation, splicing and translation. Identification of lncRNA-protein interactions helps to understand lncRNA-related activities. Existing computational methods utilize multiple lncRNA features or multiple protein features to predict lncRNA-protein interactions, but features are not available for all lncRNAs or proteins; most of existing methods are not capable of predicting interacting proteins (or lncRNAs) for new lncRNAs (or proteins), which don’t have known interactions. In this paper, we propose the sequence-based feature projection ensemble learning method, “SFPEL-LPI”, to predict lncRNA-protein interactions. First, SFPEL-LPI extracts lncRNA sequence-based features and protein sequence-based features. Second, SFPEL-LPI calculates multiple lncRNA-lncRNA similarities and protein-protein similarities by using lncRNA sequences, protein sequences and known lncRNA-protein interactions. Then, SFPEL-LPI combines multiple similarities and multiple features with a feature projection ensemble learning frame. In computational experiments, SFPEL-LPI accurately predicts lncRNA-protein associations and outperforms other state-of-the-art methods. More importantly, SFPEL-LPI can be applied to new lncRNAs (or proteins). The case studies demonstrate that our method can find out novel lncRNA-protein interactions, which are confirmed by literature. Finally, we construct a user-friendly web server, available at . [ABSTRACT FROM AUTHOR]

The exponential growth of mobile traffic means that operators must upgrade their mobile networks to provide higher capacity to final users. A promising alternative is to deploy heterogeneous networks (HetNets) that combine macro Base Stations (BSs) and SmallCells (SCs), although this increases the complexity and cost of the transport (SCs to Fiber Access Point–FAP). Most of the planning strategies outlined in the literature are aimed at reducing the number of SCs and ignore the impact that the transport segment might have on the total cost of network deployment. In this paper, heuristics are used for the joint planning of radio (i.e., SCs) and transport resources (i.e., point-to-point fiber links). These were compared and examined to determine the advantages and disadvantages of each approach, and in some cases, this led to a 50% reduction in total costs, while still creating a non-scalable network. [ABSTRACT FROM AUTHOR]

In this paper we describe how to efficiently record the entire genetic history of a population in forwards-time, individual-based population genetics simulations with arbitrary breeding models, population structure and demography. This approach dramatically reduces the computational burden of tracking individual genomes by allowing us to simulate only those loci that may affect reproduction (those having non-neutral variants). The genetic history of the population is recorded as a succinct tree sequence as introduced in the software package msprime, on which neutral mutations can be quickly placed afterwards. Recording the results of each breeding event requires storage that grows linearly with time, but there is a great deal of redundancy in this information. We solve this storage problem by providing an algorithm to quickly ‘simplify’ a tree sequence by removing this irrelevant history for a given set of genomes. By periodically simplifying the history with respect to the extant population, we show that the total storage space required is modest and overall large efficiency gains can be made over classical forward-time simulations. We implement a general-purpose framework for recording and simplifying genealogical data, which can be used to make simulations of any population model more efficient. We modify two popular forwards-time simulation frameworks to use this new approach and observe efficiency gains in large, whole-genome simulations of one to two orders of magnitude. In addition to speed, our method for recording pedigrees has several advantages: (1) All marginal genealogies of the simulated individuals are recorded, rather than just genotypes. (2) A population of N individuals with M polymorphic sites can be stored in O(N log N + M) space, making it feasible to store a simulation’s entire final generation as well as its history. (3) A simulation can easily be initialized with a more efficient coalescent simulation of deep history. The software for recording and processing tree sequences is named tskit. [ABSTRACT FROM AUTHOR]

In this paper we propose some mathematical models to plan a Next Generation Sequencing experiment to detect rare mutations in pools of patients. A mathematical optimization problem is formulated for optimal pooling, with respect to minimization of the experiment cost. Then, two different strategies to replicate patients in pools are proposed, which have the advantage to decrease the overall costs. Finally, a multi-objective optimization formulation is proposed, where the trade-off between the probability to detect a mutation and overall costs is taken into account. The proposed solutions are devised in pursuance of the following advantages: (i) the solution guarantees mutations are detectable in the experimental setting, and (ii) the cost of the NGS experiment and its biological validation using Sanger sequencing is minimized. Simulations show replicating pools can decrease overall experimental cost, thus making pooling an interesting option. [ABSTRACT FROM AUTHOR]

DNA microarrays and cell cycle synchronization experiments have made possible the study of the mechanisms of cell cycle regulation of Saccharomyces cerevisiae by simultaneously monitoring the expression levels of thousands of genes at specific time points. On the other hand, pattern recognition techniques can contribute to the analysis of such massive measurements, providing a model of gene expression level evolution through the cell cycle process. In this paper, we propose the use of one of such techniques –an unsupervised artificial neural network called a Self-Organizing Map (SOM)–which has been successfully applied to processes involving very noisy signals, classifying and organizing them, and assisting in the discovery of behavior patterns without requiring prior knowledge about the process under analysis. As a test bed for the use of SOMs in finding possible relationships among genes and their possible contribution in some biological processes, we selected 282 S. cerevisiae genes that have been shown through biological experiments to have an activity during the cell cycle. The expression level of these genes was analyzed in five of the most cited time series DNA microarray databases used in the study of the cell cycle of this organism. With the use of SOM, it was possible to find clusters of genes with similar behavior in the five databases along two cell cycles. This result suggested that some of these genes might be biologically related or might have a regulatory relationship, as was corroborated by comparing some of the clusters obtained with SOMs against a previously reported regulatory network that was generated using biological knowledge, such as protein-protein interactions, gene expression levels, metabolism dynamics, promoter binding, and modification, regulation and transport of proteins. The methodology described in this paper could be applied to the study of gene relationships of other biological processes in different organisms. [ABSTRACT FROM AUTHOR]

It has been proposed that the history and evolution of scientific ideas may reflect certain aspects of the underlying socio-cognitive frameworks in which science itself is developing. Systematic analyses of the development of scientific knowledge may help us to construct models of the collective dynamics of science. Aiming at scientific rigor, these models should be built upon solid empirical evidence, analyzed with formal tools leading to ever-improving results that support the related conclusions. Along these lines we studied the dynamics and structure of the development of research in genomics as represented by the entire collection of genomics-related scientific papers contained in the PubMed database. The analyzed corpus consisted in more than 49,000 articles published in the years 1987 (first appeareance of the term Genomics) to 2011, categorized by means of the Medical Subheadings (MeSH) content-descriptors. Complex networks were built where two MeSH terms were connected if they are descriptors of the same article(s). The analysis of such networks revealed a complex structure and dynamics that to certain extent resembled small-world networks. The evolution of such networks in time reflected interesting phenomena in the historical development of genomic research, including what seems to be a phase-transition in a period marked by the completion of the first draft of the Human Genome Project. We also found that different disciplinary areas have different dynamic evolution patterns in their MeSH connectivity networks. In the case of areas related to science, changes in topology were somewhat fast while retaining a certain core-stucture, whereas in the humanities, the evolution was pretty slow and the structure resulted highly redundant and in the case of technology related issues, the evolution was very fast and the structure remained tree-like with almost no overlapping terms. [ABSTRACT FROM AUTHOR]

B cells develop high affinity receptors during the course of affinity maturation, a cyclic process of mutation and selection. At the end of affinity maturation, a number of cells sharing the same ancestor (i.e. in the same “clonal family”) are released from the germinal center; their amino acid frequency profile reflects the allowed and disallowed substitutions at each position. These clonal-family-specific frequency profiles, called “substitution profiles”, are useful for studying the course of affinity maturation as well as for antibody engineering purposes. However, most often only a single sequence is recovered from each clonal family in a sequencing experiment, making it impossible to construct a clonal-family-specific substitution profile. Given the public release of many high-quality large B cell receptor datasets, one may ask whether it is possible to use such data in a prediction model for clonal-family-specific substitution profiles. In this paper, we present the method “Substitution Profiles Using Related Families” (SPURF), a penalized tensor regression framework that integrates information from a rich assemblage of datasets to predict the clonal-family-specific substitution profile for any single input sequence. Using this framework, we show that substitution profiles from similar clonal families can be leveraged together with simulated substitution profiles and germline gene sequence information to improve prediction. We fit this model on a large public dataset and validate the robustness of our approach on two external datasets. Furthermore, we provide a command-line tool in an open-source software package () implementing these ideas and providing easy prediction using our pre-fit models. [ABSTRACT FROM AUTHOR]