Search

Spent mushroom substrate (SMS), often disregarded as waste despite its abundance in organic matter and mineral micronutrients, has emerged as a valuable resource for diverse applications. While Europe and Asia have witnessed extensive research in this field over the past decade, Ukraine's exploration remains limited. This study conducts a thorough investigation into SMS recycling and reutilization over a 4-year period. Employing experimental and comparative methods, this research unveils compelling insights into the potential of SMS for reintroduction into the primary production cycle and secondary activities. The main conclusions reveal the success of SMS valorization in the production of additives, fertilizers, and alternative fuels. Furthermore, the application of SMS in agroecosystems significantly enhances the soil biological activity. The integration of these methods into production chains not only yields economic benefits for companies but also fosters environmental stewardship, aligning with waste-free practices and the principles of bioeconomy and sustainability. [ABSTRACT FROM AUTHOR]

These research articles are highly varied and can be classified into eight sub-domains that are representative of the chosen domain: natural and human disturbances, genetics, site conditions, tropical forest, peri-urban forest, forest soils, forest reserves, and mountain ecosystems (Figure 2). The sustainable and regular supply of ecosystem services by forests requires excellent knowledge of the functional and biological diversity in these complex ecosystems [[7], [9]]. In this study, natural forests were the most positively rated type of forest, while the managed ones were the least positively rated, revealing an important trend among the participants, and human intervention was not the foremost landscape-related factor affecting this perception. Forest ecosystems contribute to human wellbeing and the economy through the complex ecosystem services they provide [[1], [3], [5]]. [Extracted from the article]

Thanks to the efforts of our reviewers in 2022, the median time to first decision was 17 days and the median time to publication was 43 days. High-quality academic publishing is built on rigorous peer review. Regardless of whether the articles they examined were ultimately published, the editors would like to express their appreciation and thank the e of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). [Extracted from the article]

Regardless of whether the articles they examined were ultimately published, the editors would like to express their appreciation and thank the following reviewers for the time and dedication that they have shown I Agronomy i : ose of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). Thanks to the efforts of our reviewers in 2022, the median time to first decision was 18 days and the median time to publication was 37 days. I Agronomy i was able to uphold its high standards for published papers due to the outstanding efforts of our reviewers. [Extracted from the article]

The forest-based sector plays a significant role in supporting Europe on its pathway towards a more integrated and bio-based circular economy. Beyond the supply of timber, forest ecosystems offer a wide range of products and services beneficial to human wellbeing. Non-wood forest products (NWFPs) play an integral role in provisioning forest ecosystem services and constitute a huge portfolio of species from various taxonomic kingdoms. As diverse as the resources themselves is the list of end-products that may be derived from raw non-wood materials. Multiple value-chains of NWFPs provide benefits to actors across all stages of the supply chain. Forest management has not yet directed full attention towards NWFPs, since timber production remains the main management objective, although multi-purpose management is recognised as a key principle of the sector's sustainability paradigm. Lack of knowledge of the socio-economic relevance of NWFPs for European societies and diverse property rights frameworks increase the complexity in forest-based decision making additionally. In this study, the future potential of 38 NWFPs for diversifying the forest bioeconomy is investigated by means of multi-criteria analysis, including stakeholder interaction and expert involvement. The results for six case studies in different biogeographical zones in Europe indicate the latent opportunities NWFPs provide to forest owners who are willing to focus their management on the joint production of wood and non-wood resources as well as their value networks. This study intends to unravel perspectives for forest owners in particular, as they often represent principal decision makers in forest ecosystem management, act as main suppliers of NWFP raw materials, and thus can be understood as key stakeholders in a forest bioeconomy. Even though regional perspectives differ, due to varying socio-economic and ecological environments, there is huge potential to strengthen the economic viability of rural areas. Furthermore, sustainable co-production may foster the ecological integrity of forest ecosystems across Europe. Results show that wild mushrooms constitute the most widespread opportunity to increase additional income from forest management, but the most promising NWFPs can be found in the tree product, understorey plant and animal origin categories. [ABSTRACT FROM AUTHOR]

Silver fir (Abies alba Mill.) is one of the most valuable and productive tree species across European mountains, that accomplish multiple economic, protective and ecologic functions. Alongside spruce (Picea abies (L.) Karst) and beech (Fagus sylvatica L.), silver fir is a characteristic species for the Romanian Carpathians. Although silver fir tree is recommended for the diversification of forests in order to increase the resistance to climate change, it is very sensitive to climatic excesses, especially those that proceed rapidly. Therefore, the aim of this study is to investigate both the environmental conditions and stand characteristics of fir from five mountain ranges of the Romanian Carpathians. The study is based on data recorded over a period of 10 years (1990–2000). As such, a total of 77,251 stands that occupy 211,954 hectares have been investigated in regard to silver fir behaviour. MATLAB scripts were used for analysing consistent data volumes as well as the impact of eight factors on the silver fir productivity (altitude, field aspect, field slope, soil type, participation percentage, road distance, structure and consistency). Our analysis has revealed that higher silver fir productivity is found at altitudes of up to 1200 m, on mid and upper slopes, on NW field aspects, on eutric cambisols and dystric cambisols, with a 10–20% participation in stand composition and in relatively-even aged stands with a full consistency. This study offers valuable insights for forest managers that require comprehensive information in adopting effective strategies to enhance forest resilience under climate change. [ABSTRACT FROM AUTHOR]

This study analyses the influence of a planting scheme on physical properties of Norway spruce wood. The research material consisted of 326 Norway spruce trees (Picea abies (L.) H. Karst) selected from an experimental plot with four planting variants (2500, 3330, 5000, and 7510 trees·ha−1). The research aspects were: (1) wood density (measured by volumetric method and using microdrilling resistance as proxy), (2) microdrilling resistance, and (3) sound speed. There was a decrease in wood density values (from 0.3376 to 0.3367 g·cm−3) and in microdrilling resistance values (from 15.136% to 14.292%) as the number of trees·ha−1 used for plantation increased from 2500 to 5000. The planting variant with 7510 trees·ha−1 had the largest value (0.3445 g·cm−3 for wood density and 15.531% for microdrilling resistance). Sound speed decreased from 1032.8 to 989.8 m·s−1 as the number of trees·ha−1 increased from 2500 to 7510. These results show a relationship between DBH values and studied physical properties. This relationship is more evident for variants with low planting density (e.g., 2500, 3330 trees·ha−1) than that of dense planting variants (e.g., 7510 trees·ha−1). The explanation may be that the growth of trees in dense plantings is slower; in less dense planting variants, the increase in wood is greater, and as a result, wood volumetric density dependence on the DBH value is greater. [ABSTRACT FROM AUTHOR]

Thanks to the contribution of our reviewers, in 2021, the median time to first decision was 19 days and the median time to publication was 38 days. Thanks to the great efforts of our reviewers, I Agronomy i was able to maintain its standards for the high quality of its published papers. Rigorous peer-reviews are the basis of high-quality academic publishing. [Extracted from the article]

The purpose of this study, which contains historical data recorded over a period of 40 years, was to identify the main factors that influence and control the level of wood mass production. The main reason was to optimize the management of forest areas and was driven by the necessity to identify factors that can influence most of the volume produced by coniferous forests located in southeast Europe. The data was collected between1980 and 2005 at the National Institute for Research and Development in Forestry, for forests located in the Southern Carpathians, Romania. The studied data refer to the parameters that model forest structure for spruce, fir, pine, and larch. These are the main resinous species found in the Southern Carpathians. The total area covered by these forests is 143,431 ha. At the forest species level, the analysis consists of 16,162 records (corresponding to the elements of the trees), covering an area of 45,008 ha for fir, 4711 ha for larch, 81,995 ha for spruce, and 11,717 ha for pine. The aim of this research has been to investigate and to assess the impact and magnitude of abiotic factors such as altitude and field aspect on forest structures from the main resinous stands located in the Southern Carpathians. Taking into account the size of the database as well as the duration for collecting data, a complete statistical and systematic approach was considered optimum. This resulted from our wish to emphasize and evaluate the influence of each analysed factor on the wood mass production level. The relationship between abiotic factors and forest structure has been analysed by using a systematic statistical approach in order to provide a useful theoretical reference for the improvement of forest management practices in the context of multiple climatic, environmental, and socio-economic challenges. These common characteristics have been found by applying ANOVA and multivariate statistical methods such as PCA and FA methods. A series of parameters were considered in this investigation, namely altitude (ALT), forest site type (TS), forest type (TP), consistency (CONS) etc. In order to obtain a complete image, we have also applied multivariate analysis methods that emphasize the effect size for each database parameter. At such a level of recorded data, the statistical approach ensures a factor level of p <0.001 while the accuracy in evaluating effect size is increased. As such, they influence the spreading and structure of the studied resinous stands to a higher degree, regardless of species. [ABSTRACT FROM AUTHOR]