Search

High temporal resolution and spatially complete (seamless) land surface temperature (LST) play a crucial role in numerous geoscientific aspects. This paper proposes a data fusion method for producing hourly seamless LST from Himawari-8 Advanced Himawari Imager (AHI) data. First, the high-quality hourly clear-sky LST was retrieved from AHI data by an improved temperature and emissivity separation algorithm; then, the hourly spatially complete China Land Data Assimilation System (CLDAS) LST was calibrated by a bias correction method. Finally, the strengths of the retrieved AHI LST and bias-corrected CLDAS LST were combined by the multiresolution Kalman filter (MKF) algorithm to generate hourly seamless LST at different spatial scales. Validation results showed the bias and root mean square error (RMSE) of the fused LST at a finer scale (0.02°) were −0.65 K and 3.38 K under cloudy sky conditions, the values were −0.55 K and 3.03 K for all sky conditions, respectively. The bias and RMSE of the fused LST at the coarse scale (0.06°) are −0.46 K and 3.11 K, respectively. This accuracy is comparable to the accuracy of all-weather LST derived by various methods reported in the published literature. In addition, we obtained the consistent LST images across different scales. The seamless finer LST data over East Asia can not only reflect the spatial distribution characteristics of LST during different seasons, but also exactly present the diurnal variation of the LST. With the proposed method, we have produced a 0.02° seamless LST dataset from 2016 through 2021 that is freely available at the National Tibetan Plateau Data Center. It is the first time that we can obtain the hourly seamless LST data from AHI. [ABSTRACT FROM AUTHOR]

This article presents a comprehensive subpixel water mapping algorithm to automatically produce routinely open water fraction maps in the Tibetan Plateau (TP) with the Moderate Resolution Imaging Spectroradiometer (MODIS). A multi-index threshold endmember extraction method was applied to select the endmembers from MODIS images. To incorporate endmember variability, an endmember selection strategy, called the combined use of typical and neighboring endmembers, was adopted in multiple endmember spectral mixture analysis (MESMA), which can assure a robust subpixel water fractions estimation. The accuracy of the algorithm was assessed at both the local scale and regional scale. At the local scale, a comparison using the eight pairs of MODIS/Landsat 8 Operational Land Imager (OLI) water maps demonstrated that subpixels water fractions were well retrieved with a root mean square error (RMSE) of 7.86% and determination coefficient (R2) of 0.98. At the regional scale, the MODIS water fraction map in October 2014 matches well with the TP lake data set and the Global Lake and Wetland Database (GLWD) in both latitudinal and longitudinal distribution. The lake area estimation is more consistent with the reference TP lake data set (difference of −3.15%) than the MODIS Land Water Mask (MOD44W) (difference of −6.39%). [ABSTRACT FROM AUTHOR]

Snow depth estimation with passive microwave (PM) remote sensing is challenged by spatial variations in the Earth's surface, e.g., snow metamorphism, land cover types, and topography. Thus, traditional static snow depth retrieval algorithms cannot capture snow thickness well. In this study, we present a new operational retrieval algorithm, hereafter referred to as the pixel-based method (0.25° × 0.25° grid-level), to provide more accurate and nearly real-time snow depth estimates. First, the reference snow depth was retrieved using a previously proposed model in which a microwave snow emission model was coupled with a machine learning (ML) approach. In this process, an effective grain size (effGS) value was optimized by utilizing the snow microwave emission model, and then the nonlinear relationship between snow depth and multiple predictive variables, e.g., effGS, longitude, elevation, and brightness temperature (Tb) gradients, was established with the ML technique to retrieve reference snow depth data. To select a robust and well-performing ML approach, we compared the performance of widely used support vector regression (SVR), artificial neural network (ANN) and random forest (RF) algorithms over China. The results show that the three ML models performed similarly in snow depth estimation, which was attributed to the inclusion of effGS in the training samples. In this study, the RF model was used to retrieve the snow depth reference dataset due to its slightly stronger robustness according to our comparison of results. Second, the pixel-based algorithm was built based on the retrieved reference snow depth dataset and satellite Tb observations (18.7 GHz and 36.5 GHz) from Advanced Microwave Scanning Radiometer 2 (AMSR2) during the 2012–2020 period. For the pixel-based algorithm, the fitting coefficients were achieved dynamically pixel by pixel, making it superior to the traditional static methods. Third, the built pixel-based algorithm was verified using ground-based observations and was compared to the AMSR2, GlobSnow-v3.0, and ERA5-land products during the 2012–2020 period. The pixel-based algorithm exhibited an overall unbiased root mean square error (unRMSE) and R2 of 5.8 cm and 0.65, respectively, outperforming GlobSnow-v3.0, with unRMSE and R2 values of 9.2 cm and 0.22, AMSR2, with unRMSE and R2 values of 18.5 cm and 0.13, and ERA5-land, with unRMSE and R2 values of 10.5 cm and 0.33, respectively. However, the pixel-based algorithm estimates were still challenged by the complex terrain, e.g., the unRMSE was up to 17.4 cm near the Tien Shan Mountains. The proposed pixel-based algorithm in this study is a simple and operational method that can retrieve accurate snow depths based solely on spaceborne PM data in comparatively flat areas. [ABSTRACT FROM AUTHOR]

Natural snow, one of the most important components of the cryosphere, is fundamentally a layered medium. In forward simulation and retrieval, a single-layer effective microstructure parameter is widely used to represent the emission of multiple-layer snowpacks. However, in most cases, this parameter is fitted instead of calculated based on a physical theory. The uncertainty under different frequencies, polarizations, and snow conditions is uncertain. In this study, we explored different methods to reduce the layered snow properties to a set of single-layer values that can reproduce the same brightness temperature (TB) signal. A validated microwave emission model of layered snowpack (MEMLS) was used as the modelling tool. Multiple-layer snow TB from the snow's surface was compared with the bulk TB of single-layer snow. The methods were tested using snow profile samples from the locally validated and global snow process model simulations, which follow the natural snow's characteristics. The results showed that there are two factors that play critical roles in the stability of the bulk TB error, the single-layer effective microstructure parameter, and the reflectivity at the air–snow and snow–soil boundaries. It is important to use the same boundary reflectivity as the multiple-layer snow case calculated using the snow density at the topmost and bottommost layers instead of the average density. Afterwards, a mass-weighted average snow microstructure parameter can be used to calculate the volume scattering coefficient at 10.65 to 23.8 GHz. At 36.5 and 89 GHz, the effective microstructure parameter needs to be retrieved based on the product of the snow layer transmissivity. For thick snow, a cut-off threshold of 1/e is suggested to be used to include only the surface layers within the microwave penetration depth. The optimal method provides a root mean squared error of bulk TB of less than 5 K at 10.65 to 36.5 GHz and less than 10 K at 89 GHz for snow depths up to 130 cm. [ABSTRACT FROM AUTHOR]

Total precipitable water (TPW) is an important key factor in the global water cycle and climate change. The knowledge of TPW characteristics at spatial and temporal scales could help us to better understand our changing environment. Currently, many algorithms are available to retrieve TPW from optical and microwave sensors. There are still no available TPW data over land from FY-3D MWRI, which was launched by China in 2017. However, the TPW product over land is a key element for the retrieval of many ecological environment parameters. In this paper, an improved algorithm was developed to retrieve TPW over land from the brightness temperature of FY-3D MWRI. The major improvement is that surface emissivity, which is a key parameter in the retrieval of TPW in all-weather conditions, was developed and based on an improved algorithm according to the characteristics of FY-3D MWRI. The improvement includes two aspects, one is selection of appropriate ancillary data in estimating surface emissivity parameter Δε18.7/Δε23.8 in clear sky conditions, and the other is an improvement of the Δε18.7/Δε23.8 estimation function in cloudy conditions according to the band configuration of FY-3D MWRI. Finally, TPW retrieved was validated using TPW observation from the SuomiNet GPS and global distributed Radiosonde Observations (RAOB) networks. According to the validation, TPW retrieved using observations from FY-3D MWRI and ancillary data from Aqua MODIS had the best quality. The root mean square error (RMSE) and correlation coefficient between the retrieved TPW and observed TPW from RAOB were 5.47 and 0.94 mm, respectively. [ABSTRACT FROM AUTHOR]