Search

In this paper, we propose a multi-beam integrated radar and communication scheme using phased-array antenna, in which the same LFM-BPSK integrated waveform is used for both the radar and the communication beams. In the integrated beam design, the radar beam is periodically scanned in different directions for detection, and the communication beam is periodically manipulated in one direction for communication. The system's beamforming uses adaptive beamforming technology to achieve radar echoes and communication reception. For the LFM-BPSK integrated waveform used by the system, we propose a method for estimating parameters during communication reception. Through simulation, the proposed beam-pattern design, adaptive beamforming, and parameter estimation scheme can achieve radar and communication functions using phased-array antennas. [ABSTRACT FROM AUTHOR]

Due to the fast scanning speed of the current phased-array radar and the moving characteristics of the target, the moving target usually spans multiple beams during coherent integration time, which results in severe performance loss for target focusing and parameter estimation because of the unknown entry/departure beam time within the coherent period. To solve this issue, a novel focusing and detection method based on the multi-beam phase compensation function (MBPCF), multi-scale sliding windowed phase difference (MSWPD), and spatial projection are proposed in this paper. The proposed method mainly includes the following three steps. First, the geometric and signal models of multiple beam integration with observed moving targets are accurately established where the range migration (RM), Doppler frequency migration (DFM), and beam migration (BM) are analyzed. Based on that, the BM is eliminated by the MBPCF, the second-order keystone transform (SOKT) is utilized to mitigate the RM, and then, a new MSWPD operation is developed to estimate the target's entry/departure beam time, which realizes well-focusing output within the beam. After that, by dividing the radar detection area, the spatial projection (SP) method is adopted to obtain multiple-beams joint integration, and thus, improved detection performance can be obtained. Numerical experiments are carried out to evaluate the performance of the proposed method. The results show that the proposed method could achieve superior focusing and detection performances. [ABSTRACT FROM AUTHOR]

Multi-dimensional parameters joint estimation of multi-targets is introduced to implement super-resolution sensing in range, velocity, azimuth angle, and elevation angle for frequency-modulated continuous waveform (FMCW) radar systems. In this paper, a low complexity joint 3D super-resolution estimation of range, velocity, and angle of multi-targets is proposed for an FMCW radar with a uniform linear array. The proposed method firstly constructs the size-reduced 3D matrix in the frequency domain for the system model of an FMCW radar system. Secondly, the size-reduced 3D matrix is established, and low complexity three-level cascaded 1D spectrum estimation implemented by applying the Lagrange multiplier method is developed. Finally, the low complexity joint 3D super-resolution algorithms are validated by numerical experiments and with a 77 GHz FMCW radar built by Texas Instruments, with the proposed algorithm achieving significant estimation performance compared to conventional algorithms. [ABSTRACT FROM AUTHOR]

Target localization is a fundamental problem in array signal processing. The problem of locating near-field targets with multiple-input multiple-output (MIMO) radar has been studied extensively; however, most of the conventional matrix-based approaches suffer from limitations in terms of the representation and exploitation of the multidimensional nature of MIMO radar signals. In this paper, we addressed the problem of localizing multiple targets in the near-field region, aiming at pursuing a solution applicable for multidimensional signal that is able to achieve sufficient accuracy. A tensor-based signal model impinging on a monostatic frequency diverse array multiple-input multiple-output (FDA-MIMO) radar was formulated, and a corresponding tensor decomposition-based localization algorithm (TenDLA) that showcases the connection between the tensor-based analysis and the localization problem was developed. Additionally, a correction procedure to mitigate the estimation deviations on the range and angle was presented, yielding significant improvements in estimation accuracy. Numerical examples demonstrated the validity and effectiveness of the proposed approach, and it was shown that this approach is superior to conventional methods due to its high-resolution estimation accuracy as well as its relatively low computational costs. [ABSTRACT FROM AUTHOR]

As an emerging technique for detection, electromagnetic vector sensor multiple-input multiple-output (EVS-MIMO) radar has attracted extensive interest recently. This paper focuses on the coherent targets issue in EVS-MIMO radar, and a spatial smoothing estimator is developed to estimate the multiple parameters. It first recovers the rank of the array data via forward spatial smoothing. Then, it estimates the elevation angles via the rotational invariance technique. Combined with the vector cross-product method, the azimuth angles are obtained. Thereafter, with the previously achieved direction angles, the polarized parameters are acquired by using the least squares technique. Unlike the existing polarization smoothing techniques, the proposed estimator is able to estimate the two-dimensional direction parameter. Furthermore, it can provide a polarized parameter of the target. In addition, the proposed estimator is computationally efficient, since it offers closed-form and automatically paired solutions to all the parameters. Numerical experiments are carried out to show its superiority and effectiveness. [ABSTRACT FROM AUTHOR]

This paper studies the joint range and angle estimation of monostatic frequency diverse array multiple-input multiple-output (FDA-MIMO) radar and proposes a joint estimation algorithm. First, the transmit direction matrix is converted into real values by unitary transformation, and the Vandermonde-like matrix structure is used to construct an augmented output that doubles the aperture of the receive array. Then the augmented output is combined into a third-order tensor. Next, the factor matrices are initially estimated. Finally, the direction matrices are estimated utilizing parallel factor (PARAFAC) decomposition, and the range and angle are calculated by employing least square fitting. As contrasted with the classic PARAFAC method, the proposed method can estimate more targets and provide better estimation performance, and requires less computational complexity. The availability and excellence of the proposed method are reflected by numerical simulations and complexity analysis. [ABSTRACT FROM AUTHOR]

As a new radar system, FDA-MIMO radar has recently developed rapidly, as it has broad prospects in angle-range estimation. Unfortunately, the performance of existing algorithms for FDA-MIMO radar is greatly degrading or even failing under the condition of array gain-phase error. This paper proposes an innovative solution to the joint angle and range estimation of FDA-MIMO radar under the condition of array gain-phase error and an estimation algorithm is developed. Moreover, the corresponding Cramér-Rao bound (CRB) is derived to evaluate the algorithm. The parallel factor (PARAFAC) decomposition technique can be utilized to calculate transmitter and receiver direction matrices. Taking advantage of receiver direction matrix, the angle estimation can be obtained. The range estimation can be estimated by transmitter direction matrix and angle estimation. To eliminate the error accumulation effect of array gain-phase error, the gain error and phase error are obtained separately. In this algorithm, the impact of gain-phase error on parameter estimation is removed and so is the error accumulation effect. Therefore, the proposed algorithm can provide excellent performance of angle-range and gain-phase error estimation. Numerical experiments prove the validity and advantages of the proposed method. [ABSTRACT FROM AUTHOR]

For the purpose of attaining a high degree of freedom (DOF) for the direction of arrival (DOA) estimations in radar technology, coprime sensor arrays (CSAs) are evaluated in this paper. In addition, the global and local minima of extremely non-linear functions are investigated, aiming to improve DOF. The optimization features of the cuckoo search (CS) algorithm are utilized for DOA estimation of far-field sources in a low signal-to-noise ratio (SNR) environment. The analytical approach of the proposed CSAs, CS and global and local minima in terms of cumulative distribution function (CDF), fitness function and SNR for DOA accuracy are presented. The parameters like root mean square error (RMSE) for frequency distribution, RMSE variability analysis, estimation accuracy, RMSE for CDF, robustness against snapshots and noise and RMSE for Monte Carlo simulation runs are explored for proposed model performance estimation. In conclusion, the proposed DOA estimation in radar technology through CS and CSA achievements are contrasted with existing tools such as particle swarm optimization (PSO). [ABSTRACT FROM AUTHOR]

Frequency diverse array (FDA) radar has attracted much attention due to the angle and range dependence of the beam pattern. Multiple-input-multiple-output (MIMO) radar has high degrees of freedom (DOF) and spatial resolution. The FDA-MIMO radar, a hybrid of FDA and MIMO radar, can be used for target parameter estimation. This paper investigates a tensor-based reduced-dimension multiple signal classification (MUSIC) method, which is used for target parameter estimation in the FDA-MIMO radar. The existing subspace methods deteriorate quickly in performance with small samples and a low signal-to-noise ratio (SNR). To deal with the deterioration difficulty, the sparse estimation method is then proposed. However, the sparse algorithm has high computation complexity and poor stability, making it difficult to apply in practice. Therefore, we use tensor to capture the multi-dimensional structure of the received signal, which can optimize the effectiveness and stability of parameter estimation, reduce computation complexity and overcome performance degradation in small samples or low SNR simultaneously. In our work, we first obtain the tensor-based subspace by the high-order-singular value decomposition (HOSVD) and establish a two-dimensional spectrum function. Then the Lagrange multiplier method is applied to realize a one-dimensional spectrum function, estimate the direction of arrival (DOA) and reduce computation complexity. The transmitting steering vector is obtained by the partial derivative of the Lagrange function, and automatic pairing of target parameters is then realized. Finally, the range can be obtained by using the least square method to process the phase of transmitting steering vector. Method analysis and simulation results prove the superiority and reliability of the proposed method. [ABSTRACT FROM AUTHOR]

A novel unitary estimation of signal parameters via rotational invariance techniques (ESPRIT) algorithm, for the joint direction of arrival (DOA) and range estimation in a monostatic multiple-input multiple-output (MIMO) radar with a frequency diverse array (FDA), is proposed. Firstly, by utilizing the property of Centro-Hermitian of the received data, the extended real-valued data is constructed to improve estimation accuracy and reduce computational complexity via unitary transformation. Then, to avoid the coupling between the angle and range in the transmitting array steering vector, the DOA is estimated by using the rotation invariance of the receiving subarrays. Thereafter, an automatic pairing method is applied to estimate the range of the target. Since phase ambiguity is caused by the phase periodicity of the transmitting array steering vector, a removal method of phase ambiguity is proposed. Finally, the expression of Cramér–Rao Bound (CRB) is derived and the computational complexity of the proposed algorithm is compared with the ESPRIT algorithm. The effectiveness of the proposed algorithm is verified by simulation results. [ABSTRACT FROM AUTHOR]

Due to the uncertainty of radar target prior information in actual scenes, waveform design based on radar target prior information cannot meet the requirements of detection performance and parameter estimation. Aiming at the problem of waveform design for detecting multi-target in the presence of clutter, a linear probability-weighted summation (PWS) algorithm based on multi-target impulse response is proposed and includes the radar waveform design based on mutual information (MI) and signal-to-interference ratio (SINR) criteria. In view of the traditional water-filling algorithm, the problem of multi-target is further investigated in a new way to improve the overall performance of the system. The method makes a lot of deductions by using Jensen's inequality, to determine the algorithm objective function and energy constraint. The simulation results show that the proposed algorithm has better detection performance and more accurate target information. [ABSTRACT FROM AUTHOR]

To improve the parameter estimation performance of uncooperative Orthogonal Frequency Division Multi- (OFDM) Linear Frequency Modulation (LFM) radar signals, this paper proposes an iterative high-accuracy method, which is based on Fractional Fourier Transform (FrFT) and Fractional Autocorrelation (FA) interpolation. Two iterative estimators for rotation angle and center frequencies are derived from the analytical formulations of the OFDM-LFM signal. Both estimators are designed by measuring the residual terms between the quasi peak and the real peak in the fractional spectrum, which were obtained from the finite sampling data. Successful elimination of spectral leakage caused by multiple components of the OFDM-LFM signal is also proposed by a sequential removal of the strong coefficient in the fractional spectrum through an iterative process. The method flow is given and its superior performance is demonstrated by the simulation results. [ABSTRACT FROM AUTHOR]