Search

Carbon emission issues are becoming increasingly severe, and the carbon emissions in shrinking cities, primarily characterized by population loss, are often overlooked and insufficiently studied. This paper focuses on the carbon emissions from county-level administrative units in China's three northeastern provinces from 2001 to 2017. The study scientifically identified shrinking cities and measured the differences in carbon emission characteristics between growing and shrinking cities using the Theil index. Ultimately, the paper constructs a panel spatial econometric model to analyze the factors influencing them and explore their spatial effects. (1) The total carbon emissions in the Three Northeastern Provinces exhibited an inverted U-shaped trend, increasing from 734.21 million tons in 2001 to 1731.73 million tons in 2017, with the Mann–Kendall trend test showing a significant increase; spatially, this manifests as a significant positive spatial autocorrelation. (2) The region has 138 shrinking cities, accounting for over 50%; regarding carbon emission characteristics, the Theil index has consistently remained above 0.18, indicating significant differences between the carbon emissions of growing and shrinking cities. (3) The panel spatial econometric model results show that the influencing factors of carbon emissions in shrinking cities have unique directions, intensities, and spatial effects. In shrinking cities, aside from localized GDP effects and per-capita GDP acting as a suppressant, the population size has a pronounced inhibitory effect on local and surrounding carbon emissions. The analysis reveals significant differences in the carbon emission patterns and mechanisms between growing and shrinking cities; based on these results, the paper proposes differentiated carbon control strategies. [ABSTRACT FROM AUTHOR]

This article presents the results of the study of the morphological composition of municipal solid waste (MSW) from the landfill of Atyrau city, and the waste's energy characteristics and presence of microorganisms, including bacteria, fungi and viruses. This study was carried out under a government order to determine the feasibility of recycling accumulated and incoming waste into electricity and its hazard to the environment and the workers involved in handling it. At the moment, there is no MSW recycling in Kazakhstan, which has led to the accumulation of more than 125 million tons of waste with an annual increase of 5 million tons. The research included four major cities (Almaty, Shymkent, Atyrau and Astana), which were selected not only on the basis of population, but also because the cities were located in different climatic zones. Samples were collected at the city landfills: 10 samples with an average distance of 100 m from each other were collected to provide a maximum coverage of both recently received waste and long-time stored waste. The research showed that neither climatic conditions nor the population size had a significant impact on MSW density, the values of which ranged from 120.1 kg/m3 to 145.4 kg/m3, as this indicator directly depends on the quality of life. The mass of the combustible fraction ranged from 39.41% to 54.62% and was mainly represented by plastic, textile and paper waste. The average value for the four cities was 50.30%. The higher calorific value fell in the range of 24.22–30.49 MJ/kg, with an average value of 26.71 MJ/kg. Microbiological studies showed little difference in average composition regardless of climatic conditions. Thus, no sharp differences in MSW composition, its energy characteristics and microbiological composition were found. The results of this study may be useful for optimising MSW recycling and disposal processes, as well as for developing measures to reduce their negative impact on the environment and human health. [ABSTRACT FROM AUTHOR]

There is a general consensus that bio-waste is a suitable material for valorization by means of the fermentation process with the production of biogas. The success of a bio-waste closed-loop economy will ultimately be determined by the demand for the products made from it. Poor-quality composts and fermentation products will not be allowed on the market in the long term. This means that not only final products but also bio-waste from separate collections must also meet the quality requirements. The aim of this 12-month study was a monthly analysis determining the level of contaminants in bio-waste collected from rural communities, single-family neighborhoods in urban areas, and multi-family neighborhoods in urban areas. The share of contaminants in bio-waste from rural areas and single-family urban housing averaged 8.2% and 7.2%, respectively, while multi-family urban housing had a significantly higher average of 16.6%. The primary contaminants identified were treated wood, plastics, mineral wastes, paper, and glass in rural areas and plastics, paper, treated wood, glass, and textiles in urban areas. The close positive correlation found between the total content of pollutants and, in particular, with plastics and kitchen waste in bio-waste collected in rural communities and from multi-family housing in cities indicates that they are likely the main source of the origin of these pollutants. [ABSTRACT FROM AUTHOR]

In the context of ongoing global urbanization, the disparity in urban development, marked by the dual phenomena of urban sprawl and urban shrinkage at the regional level, has become increasingly evident. In this vein, two land-related governance strategies—smart growth (SG) and smart shrinkage (SS)—emerge as potential remedies to these challenges, targeting urban expansion and shrinkage, respectively. This study bridges the gap in the fragmented discourse surrounding SG and SS by conducting a comprehensive comparative review on the respective literatures. Utilizing the Scopus database, our research employs trend analysis, text and topic mining, time node analysis, and regional analysis, augmented by qualitative reviews of seminal papers. The findings reveal a notable shift in research focus, with interest in SS surging around 2010 (the number of SS-related papers published after 2010 accounts for 92.3% of the total number of the entire study period) as attention to SG waned, suggesting an impending paradigm shift in urban sustainability. The analysis indicates that SS research lacks the disciplinary diversity, thematic breadth, and empirical depth of SG studies, underscoring a need for a more robust theoretical foundation to support urban sustainability. Furthermore, while both SG and SS derive from environmental science foundations, SG predominantly addresses the physical and landscape attributes of urban areas, whereas SS focuses more on socio-economic dimensions. Our findings point to an intrinsic link between SG and SS, which could lay the groundwork for their integration into a unified theoretical framework to better advance urban sustainability. [ABSTRACT FROM AUTHOR]

This paper deals with beach litter presence on the Ionian coast of Albania, i.e., at Vlora Bay and the Albanian Riviera, which is the most famous coastal tourist destination in the country. Along 16 beaches surveyed in November–December 2022 was found a total amount of 6621 litter items (or 416 kg) belonging to 114 categories of the EU J−code list. Most of these were plastic fragments and items (82%), mainly linked to local tourist activities. Wastewaters were responsible for bringing different litter items to the urban beaches of Vlora Bay. The most commonly observed litter items were cigarette butts, plastic caps/lids, and medium-sized plastic fragments of non-foamed plastic. The cleanest beaches, quite often, were the ones where beach clubs implemented clean-up programs during and at the end of the summer season. The results of this paper constitute a baseline of the beach litter amount and content along the study coast, which has never been investigated before. Municipalities and beach clubs have to implement more frequent and efficient clean-up activities and educational initiatives to reduce beach pollution, with special attention paid to the presence of cigarette butts and other small plastic items. [ABSTRACT FROM AUTHOR]

Enhancing urban resilience (UR) is the pivotal strategy for achieving sustainable development. Given that land serves as the cornerstone of urban activities, it is imperative to examine the relationship between land marketization (LM) and urban resilience amidst the profound market-oriented land reforms in China. After establishing the conceptual framework of urban resilience, this paper assesses the temporal and spatial dynamics and empirically investigates the impact of land marketization on urban resilience, drawing on data from 282 cities across China, spanning from 2001 to 2021. Our findings reveal several important insights. First, due to its public bidding and competitive pricing mechanisms, land marketization is a powerful measure to foster urban resilience and enables cities to flexibly respond to various challenges and changes. Second, the indirect mechanisms, including optimizing resource allocation, upgrading industrial structure, and fostering technological innovation, are crucial pathways through which land marketization affects urban resilience. Finally, the impact of land marketization on urban resilience varies across regions and city size. Cities with better geographic locations, larger population sizes, and lower administrative levels are more significantly affected than others. These findings reveal the importance of land marketization in strengthening urban resilience, thereby providing theoretical guidance and empirical references for cities to enhance urban resilience through land marketization. [ABSTRACT FROM AUTHOR]

Urban air mobility (UAM) is a revolutionary approach to transportation in densely populated cities. UAM involves using small, highly automated aircraft to transport passengers and goods at lower altitudes within urban and suburban areas, aiming to transform how people and parcels move within these environments. On average, UAM can reduce travel times by 30% to 40% for point-to-point journeys, with even greater reductions of 40% to 50% in major cities in the United States and China, compared to land transport. UAM includes advanced airborne transportation options like electric vertical takeoff and landing (eVTOL) aircraft and unmanned aerial vehicles (UAVs or drones). These technologies offer the potential to ease traffic congestion, decrease greenhouse gas emissions, and substantially cut travel times in urban areas. Studying the applications of eVTOLs and UAVs in parcel delivery and passenger transportation poses intricate challenges when examined through the lens of operations research (OR). By OR approaches, we mean mathematical programming, models, and solution methods addressing eVTOL- and UAV-aided parcel/people transportation problems. Despite the academic and practical importance, there is no review paper on eVTOL- and UAV-based optimization problems in the UAM sector. The present paper, applying a systematic literature review, develops a classification scheme for these problems, dividing them into routing and scheduling of eVTOLs and UAVs, infrastructure planning, safety and security, and the trade-off between efficiency and sustainability. The OR methodologies and the characteristics of the solution methods proposed for each problem are discussed. Finally, the study gaps and future research directions are presented alongside the concluding remarks. [ABSTRACT FROM AUTHOR]

The development of smart cities has led to transforming modern city operations by applying emerging technologies from the fourth industrial revolution such as the Internet of Things, BIM and machine learning. To prepare for the future development of cities, it is necessary to investigate the current status of city development, research topics and the direction toward future cities. In this study, a systematic literature review was conducted following the combination of literature review guides by Kitchenham and the PRISMA statement. The review identified 141 peer-reviewed academic papers from web-based archives, such as Web of Science and SCOPUS, that were categorized into five topics related to smart cities and urban areas. The technologies applied in the research were analyzed to determine the direction future cities should take based on current smart cities and emerging technologies that will shape individuals' daily lives. However, it was discovered that research papers on critical areas, such as mobility and management, were lacking compared to those on building design and urban planning. This paper concludes with an example of a future urban area that has been transformed due to adoption of future mobility technology to address the shortcomings of the reviewed literature on building and urban environments. [ABSTRACT FROM AUTHOR]

How can computational tools support the proposition of 15-minute cities? This paper examines the implementation of computer-aided approaches that support the analysis and proposition of urban areas where residents can access all their basic needs within a 15-minute walk, bike ride, or public transportation ride—the ultimate goal of a 15-minute city. Although this concept has gained significant attention as a sustainable and equitable urban development model, more efficient implementations require complex spatial and temporal analysis. At the same time, computational approaches such as those within the generative and parametric logic can utilize algorithms to create and test design solutions quickly and efficiently, allowing designers to address a variety of scenarios and options for producing more walkable, integrated, and resilient urban environments. Exploring a systematic review of the scientific literature (n = 244 peer-reviewed empirical studies) on Scopus and Web of Science databases, this paper synthesizes approaches to support the analysis and design of 15-minute cities, emphasizing the use of computer-aided techniques. The work contributes to developing a knowledge base on computational tools for 15-minute cities, highlighting their strengths, limitations, and potential for further development. [ABSTRACT FROM AUTHOR]

Measuring human perception of environmental safety and quantifying the street view elements that affect human perception of environmental safety are of great significance for improving the urban environment and residents' safety perception. However, domestic large-scale quantitative research on the safety perception of Chinese local cities needs to be deepened. Therefore, this paper chooses Chaoyang District in Beijing as the research area. Firstly, the network safety perception distribution of Chaoyang District is calculated and presented through the CNN model trained based on the perception dataset constructed by Chinese local cities. Then, the street view elements are extracted from the street view images using image semantic segmentation and target detection technology. Finally, the street view elements that affect the road safety perception are identified and analyzed based on LightGBM and SHAP interpretation framework. The results show the following: (1) the overall safety perception level of Chaoyang District in Beijing is high; (2) the number of motor vehicles and the proportion of the area of roads, skies, and sidewalks are the four factors that have the greatest impact on environmental safety perception; (3) there is an interaction between different street view elements on safety perception, and the proportion and number of street view elements have interaction on safety perception; (4) in the sections with the lowest, moderate, and highest levels of safety perception, the influence of street view elements on safety perception is inconsistent. Finally, this paper summarizes the results and points out the shortcomings of the research. [ABSTRACT FROM AUTHOR]

With the operation of the first route in Xi'an City, the matching relationship between the metro networks and the urban population is a root factor affecting the utilization of rail transit facilities. The mismatch between the metro networks and the urban population has led to an imbalance between the supply and demand for rail transport, resulting in wasted urban infrastructure. Based on this issue, the research objective is to focus on the spatiotemporal variations of the matching relationship. Firstly, the topological network model abstractly extracted metro spatial distribution features, and the spatial autocorrelation model was adopted to identify the evolution characteristics of the metro networks and urban population. Secondly, this paper adopted a time-lagged regression model to demonstrate the action relationship from 2011 to 2021. Then, the compositive coordination index was utilized to assess the variation of the global matching relationship. Finally, the paper explored spatial heterogeneity through the coupling coherence degree attached to grid cells. The research results indicate that the Moran's I value of metro elements decreased from 0.782 to 0.510 with the further complexity of topological networks, while the population was consistently high in spatial dependence with a Moran's I value of around 0.75 during the decade. Based on the regression coefficients and significance, this paper verified the hypothesis that the metro networks and urban population had a positive time-lagged feedback effect in urban development. From 2011 to 2021, the compositive coordination index symbolizing the global matching relationship increased from 0.29 to 0.90, but the coupling coherence degree shows significant spatial heterogeneity in different grid units. Differentiated spatial planning strategies were proposed for varied areas to efficiently utilize rail transit, which may provide a reference for other cities with the same reality problem. [ABSTRACT FROM AUTHOR]

Land intensive use reflects the spatial structure, agglomeration characteristics, and internal mechanisms of urban economic, social, and ecological system development, significantly impacting urban resilience. Based on panel data from 287 cities in China from 2010 to 2020, this paper measures the levels of land intensive use and urban resilience, and empirically examines the impact mechanism of land intensive use on urban resilience through baseline regression and panel quantile regression. The results reveal that: (1) During the study period, China's urban land intensive use level has significantly improved. The land intensive use level shows a trend of "the strong become stronger, and the weak are always weak" and "high in the east and low in the west" spatial differentiation, while the urban resilience level showed a trend of accelerated "catching up" of low-resilience cities towards high-resilience cities and "high in the east and low in the west" spatial differentiation as well. (2) Land intensive use significantly promotes effect on urban resilience, and the effect depends on different conditions. (3) Among all dimensions of land intensive use, both land input intensity and land use benefits significantly promote urban resilience, while land use intensity shows an insignificant effect. (4) The impact of land intensive use on urban resilience demonstrates significant scale heterogeneity and geographic regional heterogeneity. Based on these findings, the paper proposes relevant policy suggestions for land intensive use aimed at improving urban resilience, offering guidance for promoting high-quality land use and sustainable urban resilience development. [ABSTRACT FROM AUTHOR]

With the growing trend of urbanisation and the growing number of people migrating to cities, the demand for the development and construction of new buildings and infrastructure has risen, meaning that the construction industry must adapt to these trends. Growing demands with shorter deadlines for an industry already known for its high costs and late delivery means that productivity must be increased without increasing costs. The solution for this might lie in the application of the Lean philosophy to the construction industry. This paper analyses the application of the Lean philosophy in order to increase the productivity of construction work for an airport project. This paper highlights the potential for enhancing productivity in construction workplaces by concurrently fostering continuous improvement and sustainability through the implementation of the A3 methodology and Lean principles, resulting in waste reduction and increased value. [ABSTRACT FROM AUTHOR]

In the critical period of strengthening the construction of ecological civilization, the construction of forest cities has become an important measure to promote urban ecosystem restoration and achieve sustainable development. Based on the mechanism of forest city promoting green development, the construction of a national forest city is regarded as a "quasi-natural experiment". Using China's urban panel data from 2005 to 2019, the impact of national forest city construction on urban green total factor productivity was evaluated using Multistage asymptotic double difference. The results show that National Forest Cities with environmental regulation can significantly promote regional green total factor productivity, which is still valid after a series of Robustness tests. Mechanism analysis shows that forest city construction not only affects territorial spatial planning but also forms a linkage with green technology innovation, mutual promotion and mutual promotion to jointly promote the sustainable development goals. This paper argues that building a national forest city is an important measure to achieve China's sustainable development goals in the new era, but in the process of policy implementation, it is necessary to implement the national forest city selection system according to local conditions. [ABSTRACT FROM AUTHOR]

The virtual water flow behind product trade provides researchers with ideas to alleviate water problems in China's coastal areas, with accompanying resource and economic implications. This paper adopts a multi-region input–output model to calculate virtual water flows in coastal areas and analyses resource benefits and economic benefits, by combining the water stress index and shadow price, to measure gains and losses of virtual water flow. This study shows that (1) China's coastal areas depends on external water supplies; (2) virtual water flows between coastal and inland areas generated 38.26 billion m3 of net scarce water savings and CNY 31,751 billion of net economic benefits, indicating that coastal areas benefited from virtual water flows from both resource and economic perspectives; (3) virtual water flows among coastal provinces and cities caused 11.10 billion m3 of net scarce water losses, but generated CNY 9784 billion of net economic gains, indicating that a further intensification of water stress in coastal areas, but such a virtual water flow pattern was beneficial from an economic perspective. This paper reveals the resource and economic impacts of virtual water flow at the national scale and among coastal provinces and cities and further proposes suggestions for promoting the beneficial flow of virtual water in coastal areas. [ABSTRACT FROM AUTHOR]

Buildings are significant components of digital cities, and their precise extraction is essential for the three-dimensional modeling of cities. However, it is difficult to accurately extract building features effectively in complex scenes, especially where trees and buildings are tightly adhered. This paper proposes a highly accurate building point cloud extraction method based solely on the geometric information of points in two stages. The coarsely extracted building point cloud in the first stage is iteratively refined with the help of mask polygons and the region growing algorithm in the second stage. To enhance accuracy, this paper combines the Alpha Shape algorithm with the neighborhood expansion method to generate mask polygons, which help fill in missing boundary points caused by the region growing algorithm. In addition, this paper performs mask extraction on the original points rather than non-ground points to solve the problem of incorrect identification of facade points near the ground using the cloth simulation filtering algorithm. The proposed method has shown excellent extraction accuracy on the Urban-LiDAR and Vaihingen datasets. Specifically, the proposed method outperforms the PointNet network by 20.73% in precision for roof extraction of the Vaihingen dataset and achieves comparable performance with the state-of-the-art HDL-JME-GGO network. Additionally, the proposed method demonstrated high accuracy in extracting building points, even in scenes where buildings were closely adjacent to trees. [ABSTRACT FROM AUTHOR]

The deployment of intelligent transportation is still in its early stages and there are many challenges that need to be addressed before it can be widely adopted. Autonomous vehicles are a class of intelligent transportation that is rapidly developing, and they are being deployed in selected cities. A combination of advanced sensors, machine learning algorithms, and artificial intelligence are being used in these vehicles to perceive their environment, navigate, and make the right decisions. These vehicles leverage extensive data sourced from various sensors and computers integrated into the vehicle. Hence, massive computational power is required to process the information from various built-in sensors in milliseconds to make the right decision. The power required by the sensors and the use of additional computational power increases the energy consumption, and, hence, could reduce the range of the autonomous electric vehicle relative to a standard electric car and lead to additional emissions. A number of review papers have highlighted the environmental benefits of autonomous vehicles, focusing on aspects like optimized driving, improved route selection, fewer stops, and platooning. However, these reviews often overlook the significant energy demands of the hardware systems—such as sensors, computers, and cameras—necessary for full autonomy, which can decrease the driving range of electric autonomous vehicles. Additionally, previous studies have not thoroughly examined the data processing requirements in these vehicles. This paper provides a more detailed review of the volume of data and energy usage by various sensors and computers integral to autonomous features in electric vehicles. It also discusses the effects of these factors on vehicle range and emissions. Furthermore, the paper explores advanced technologies currently being developed by various industries to enhance processing speeds and reduce energy consumption in autonomous vehicles. [ABSTRACT FROM AUTHOR]

China is currently focusing on the cooperative control of air pollution and CO2 emissions, as well as the mitigation of economic policy uncertainty (EPU). By using panel data from 282 cities spanning from 2003 to 2017 and a newly constructed city-level EPU index, a spatial Durbin, two-way fixed-effects model is employed, with the aim of estimating the impact of EPU on the synergistic emissions intensity (SEI) of air pollutants and CO2. Additionally, this paper investigates the potential channels through which EPU influences SEI. It also explores how pressures related to environmental protection and economic development affect the impact of EPU on SEI. The results indicate that a unit increase in EPU will result in a rise in the SEI of local cities, adjacent cities, and total cities by 930.9%, 69,162.7%, and 70,093.6%, respectively. Moreover, the channel analysis suggests that EPU exacerbates SEI by undermining the upgrading of the industrial structure, augmenting industrial structure distortion, and escalating labor market distortion. Furthermore, the effect of EPU on SEI may be lessened by an increase in environmental protection pressure, while an increase in economic development pressure may exert a positive influence. Finally, this paper concludes by recommending that policymakers should prioritize the maintenance and stability of economic policies, facilitate the advancement of the industrial structure, enhance the efficiency of labor resource allocation, and underscore the significance of managing urban air pollution and CO2 emissions. [ABSTRACT FROM AUTHOR]

The risk of dying or being injured as a result of traffic collisions is higher for medical emergency responders than for other professional drivers. This systematic review synthesizes the literature regarding the collisions of ambulances, focusing on the prevalence and characteristics surrounding such events. Keywords including paramedics and traffic collisions were searched in papers available in PubMed from January 1990 to July 2021. Two independent reviewers screened the abstracts of 2494 papers and ended up with 93 full-text articles to assess for eligibility, of which 26 papers were finally kept for this review. There was a total of 18 studies conducted in the United States, followed by 3 in Turkey, 2 in Taiwan, 1 in both the United States and Canada, 1 in France, and 1 in Poland. There is a high record of injury and fatal collisions for ambulances compared to other commercial or similarly sized vehicles. Drivers less than 35 years old with low experience and a history of citations are more likely to be involved in such collisions. Ambulance collisions are more likely to happen in urban areas and intersections are the riskiest locations. Most collisions occur when the ambulance is responding to an emergency call (i.e., going to the patient or the hospital) and using lights and sirens. Tailored preventive policies and programs for improving paramedics' safety should be sought to reduce the burden of these occupational collisions. [ABSTRACT FROM AUTHOR]

The increase in traffic caused by new development affects the change in traffic conditions on the surrounding roads, and shopping centres are significant traffic generators. The development of local travel generation rates and their characteristics for individual land uses from the aspect of traffic demand is a reliable way to plan traffic in order to come up with preventive solutions to traffic problems, that is, prevention of possible negative consequences on traffic conditions in the street network occurring due to the construction of shopping centres. One of the main aims of this paper is to develop a model for objective assessment of the generated traffic demand for significant changes in land use, such as the construction of shopping centres in medium-sized towns. All these would be steps in the right direction for the promotion of reliable traffic planning and adoption of TIA for every new development before a decision regarding the change in land purpose has been made. This kind of process still has not been established systematically in either Bosnia and Herzegovina and the Republic of Serbia, or in surrounding countries. This paper focuses on the formulation of a model for determining the volume of traffic generated by shopping centres in medium-sized towns in two countries of the Southeast Europe region. The survey was conducted in eight different locations (cities) where there are shopping centres with common facilities. The analysis showed that the number of visitors and vehicles attracted by the shopping centre zone can be determined by a model based on a linear regression analysis. The analysis included exploring several different factors of trip generation in shopping centres, including the relationship between trip generation and combinations of several independent variables. The verification of the model was conducted in real conditions of the traffic flow generated by a shopping centre which was not the analysis subject when forming the forecasting model. In this way, the validity of the proposed model is credibly assessed. The developed model can be applied in the procedures of planning the construction of shopping centres in medium-sized cities in the Republic of Serbia and Bosnia and Herzegovina, and wider, in the region of Southeast Europe, in order to estimate the volume of generated traffic demand, that is, its impact on the conditions of traffic on the surrounding traffic network. [ABSTRACT FROM AUTHOR]

Human mobility, encompassing the movement of individuals and/or groups across space and time, significantly impacts various aspects of society, with intra-urban mobility being a major research focus of scholars in diverse disciplines. Bike-sharing systems have become an alternatives in cities for achieving more sustainable transportation. Hence, bike-sharing-related data are considered an important data source to study intra-urban human mobility. To better understand human mobility in cities, it is essential to characterize the typical patterns involved in intra-urban human mobility. This paper mainly focuses on characterizing the temporal patterns of intra-urban human mobility on bike-sharing based on the trip information of the acquired bike-sharing data. To achieve this, on the one hand, we adopted an exploratory data analysis (EDA) method to describe the temporal patterns by performing exploratory analyses of bike-sharing trips. On the other hand, we used the continuous triangular model (CTM) to conduct multi-temporal-scale analysis of bike-sharing trips for further explorations of the temporal patterns where necessary. The data of bike-sharing trips in Shanghai, China, were adopted as the dataset for the case study. Generally, the study was conducted at two different levels: the trip level and the bike level. Specifically, at each level, the explorations were conducted from varying perspectives. According to the analyses, numerous meaningful temporal patterns were discovered, and several distinctive findings were acquired. The results of this study show the effectiveness of the EDA and CTM methods in characterizing temporal patterns of intra-urban human mobility, based on which potentially insightful information and suggestions can be provided to assist related actions. [ABSTRACT FROM AUTHOR]

Population growth and environmental burden have turned the efforts of cities globally toward smarter and greener mobility. Cooperative and Connected Automated Mobility (CCAM) serves as a concept with the power and potential to help achieve these goals building on technological fields like Internet of Things, computer vision, and distributed computing. However, its implementation is hindered by various challenges covering technical parameters such as performance and reliability in tandem with other issues, such as safety, accountability, and trust. To overcome these issues, new distributed and decentralized approaches like blockchain and smart contracts are needed. This paper identifies a comprehensive inventory of CCAM challenges including technical, social, and ethical challenges. It then describes the most prominent methodologies using blockchain and smart contracts to address them. A comparative analysis of the findings follows, to draw useful conclusions and discuss future directions in CCAM and relevant blockchain applications. The paper contributes to intelligent transportation systems' research by offering an integrated view of the difficulties in substantiating CCAM and providing insights on the most popular blockchain and smart contract technologies that tackle them. [ABSTRACT FROM AUTHOR]

A single-phase grounding fault often occurs in 10 kV distribution networks, seriously affecting the safety of equipment and personnel. With the popularization of urban cables, the low-resistance grounding system gradually replaced arc suppression coils in some large cities. Compared to arc suppression coils, the low-resistance grounding system features simplicity and reliability. However, when a high-resistance grounding fault occurs, a lower amount of fault characteristics cannot trigger the zero-sequence protection action, so this type of fault will exist for a long time, which poses a threat to the power grid. To address this kind of problem, in this paper, a hybrid grounding system combining the low-resistance protection device and fully controlled power module is proposed. During a low-resistance grounding fault, the fault isolation is achieved through the zero-sequence current protection with the low-resistance grounding system itself, while, during a high-resistance grounding fault, the reliable arc extinction is achieved by regulating the neutral-point voltage with a fully controlled power module. Firstly, this paper introduces the principles, topology, and coordination control of the hybrid grounding system for active voltage arc extinction. Subsequently, a dual-loop-based control method is proposed to suppress the fault phase voltage. Furthermore, a faulty feeder selection method based on the Kepler optimization algorithm and convolutional neural network is proposed for the timely removal of permanent faults. Lastly, the simulation and HIL-based emulated results verify the rationality and effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Tourism has emerged as a pivotal element of China's economic development, particularly within its coastal cities. This paper presents a comprehensive analysis of China's coastal city tourism economic development, focusing on 53 coastal cities. Through a meticulous combination of literature analysis and data crawling, a robust database is constructed, encompassing tourism resources and revenues. This study delineates the spatial–temporal evolution pattern of China's coastal city tourism development and employs geo-detector methods to quantitatively analyze the impact factors driving this evolution. Key findings reveal distinct trends in the coastal tourism economy of China from 2009 to 2019, characterized by spatial stability, similar trends in adjacent spatial units, and localized spatial structures. Notably, factors such as actual foreign investment, the presence of star-rated guesthouses, tourism industry employment, airport activity, and import–export trade volume exert significant influence on the domestic tourism economy. Similarly, tourism employment, airport activity, availability of star-rated hotels, import–export trade, and utilization of foreign capital emerge as influential factors shaping inbound tourism. Policy recommendations emphasize the need for government intervention to optimize tourism development strategies for coastal cities. This entails balancing resource exploitation with environmental protection and enhancing the quality of tourism services, fostering sustainable growth and long-term prosperity. [ABSTRACT FROM AUTHOR]

Optimizing urban land use is of significant practical importance for promoting economic development, enhancing the standard of living for individuals residing in metropolitan areas, enhancing urban infrastructure and public services, driving urban transformation and upgrading, and attaining synchronized progress of the economy, society, and environment. This paper uses the super-efficiency SBM model to measure the urban land use efficiency (ULUE) of 13 cities in the Beijing–Tianjin–Hebei (BTH) urban agglomeration from 2005 to 2020 and explores the spatiotemporal evolution characteristics and influencing factors of ULUE in this urban agglomeration using analysis of spatial data and application of geographic detector methods. The results show that (1) from 2005 to 2020, the ULUE of the BTH urban agglomeration had an initial rise followed by a decline; however, the overall efficiency score is above 1, suggesting an overall effective state; (2) a distribution pattern with Beijing as its core was established, exhibiting greater ULUE in the northern region and poorer efficiency in the southern region, with significant correlation characteristics in efficiency values between adjacent cities; and (3) capital input, labor input, social welfare, and ecological environment are all influencing factors that promote the improvement in ULUE in the BTH region, and the interaction of any two factors explains the ULUE in this region better than a single factor. The empirical research results can provide useful references for improving the input–output ratio of land units and further spatial planning and policy formulation in the BTH region. [ABSTRACT FROM AUTHOR]

Carbon compensation can guide human activities in reducing carbon emissions or increasing carbon sequestration and also represents an important approach for coordinating regional development. In this paper, Chongqing Municipality, whose internal development is varied, was selected as a case study. The annual carbon emissions, carbon sequestration, carbon deficits, and inter-regional carbon compensation costs from 2000 to 2021 were continuously estimated via local optimization methods, and a carbon compensation zoning scheme was proposed that integrates the present situation and trend analysis. The results show that (1) Chongqing's total carbon emissions were greater than the total carbon sequestration, and the carbon deficit was approximately 556.24 × 104 t~3621.58 × 104 t. (2) County-level carbon budgets have large regional differences; the counties that should always receive carbon compensation are from the southeast and northeast regions, and the counties that should always pay carbon compensation are from central urban areas and the surrounding new urban areas. (3) All the counties were zoned into key payment areas, basic payment areas, key recipient areas, and basic recipient areas. The key payment areas, which account for 39.47%, maintain and grow payment status and are the main sources of carbon compensation costs, while the key recipient areas, which account for 44.74%, maintained a negative compensation status and a continuous downward trend, meaning that they may receive increasing carbon compensation costs. This paper revealed inequities in carbon compensation and proposed a novel zoning solution, which can provide scientific reference and data support for further establishing inter-regional carbon compensation mechanisms. [ABSTRACT FROM AUTHOR]

Warsaw is among European cities with the worst atmospheric air quality, mainly due to very high pollution emitted by the residential sector and road traffic. This results in high concentrations of particulate matter and nitrogen oxides, often exceeding WHO standards. The paper discusses the current and expected effects of actions taken by the Warsaw authorities, to significantly improve air quality in the city. The policy directly addresses one of the UN Sustainable Development Goals (SDG 11, Sustainable Cities and Communities). The analysis presented in the paper consists of two stages. The first, covering the years 2018–2029, deals with the ongoing Clean Air Program, which assumes primarily the reduction, and ultimately the complete elimination, of coal combustion in all heat sources of the residential sector. This sector is widely identified as the main source of urban air quality degradation, especially in Polish cities due to the dominant share of coal in the fuel mix. The second part of the corrective measures, covering the period 2024–2034, primarily concerns the reduction of nitrogen oxide pollution, mainly from traffic. The latter takes into account the expected effects of the introduction of a Low-emission Zone (LEZ) in the city center (launched in July 2024) and implemented in five two-year stages, in which car emission limits will be gradually tightened. According to the analysis results, the implementation of the Clean Air Program can result in about a 20% reduction in annual average PM2.5 concentrations by 2024, with a small (about 9%) reduction in NOx. At the same time, a significant reduction in NOx levels can be achieved by full implementation of the LEZ, especially within the zone boundaries (more than 50%). An important factor here is the size of the zone. The paper compares the effectiveness of two being considered versions, differing in size zones. [ABSTRACT FROM AUTHOR]

The densification of urban spaces globally has contributed to a need for design tools supporting the planning of more sustainable, efficient, and liveable cities. Urban Design Optimisation (UDO) responds to this challenge by providing a means to explore many design solutions for a district, evaluate multiple objectives, and make informed selections from many Pareto-efficient solutions. UDO distinguishes itself from other forms of design optimisation by addressing the challenges of incorporating a wide range of planning goals, managing the complex interactions among various urban datasets, and considering the social–technical aspects of urban planning involving multiple stakeholders. Previous reviews focusing on specific topics within UDO do not sufficiently address these challenges. This PRISMA systematic literature review provides an overview of research on topics related to UDO from 2012 to 2022, with articles analysed across seven descriptive categories. This paper presents a discussion on the state-of-the-art and identified gaps present in each of the seven categories. Finally, this paper argues that additional research to improve the socio-technical understanding and usability of UDO would require: (i) methods of optimisation across multiple models, (ii) interfaces that address a multiplicity of stakeholders, (iii) exploration of frameworks for scenario building and backcasting, and (iv) advancing AI applications for UDO, including generalizable surrogates and user preference learning. [ABSTRACT FROM AUTHOR]

Current approaches to the provision of shelter, largely driven by national governments and/or the commercial private sector, continue to fall short of what is needed to reduce housing deficits. The number of people without access to adequate housing continues to grow, especially in cities of the Global South. Increasing attention is being paid to alternative models for organizing land and housing delivery, such as those led by, or at least including, civil society. In this paper, we consider two national land and housing programs—the 20,000 Plots Project in Tanzania, and Basic Services for the Urban Poor (BSUP) in India—alongside community-led housing initiatives from each country. We explore the extent to which community participation in housing delivery can have social and environmental advantages when compared to 'business as usual' methods and find that, given appropriate state support, community-based, and civil society actors (including organizations of the urban poor) have significant potential to contribute to acquiring land, building homes and improving the quality of life of vulnerable segments of the population. This paper echoes calls for community-led housing to become a recognized part of formal housing policy whilst emphasizing the need for theoretical refinement of the process so as to prevent it from being captured by prevailing market-led narratives. [ABSTRACT FROM AUTHOR]

Since entering the 21st century, many developing countries around the world have begun to enter a stage of rapid urbanization; large-scale "rural-urban" population migration has become a typical social phenomenon in these countries. Against this backdrop, this paper aims to elucidate the spatial migration characteristics of rural populations and to discuss future rural–urban development strategies. For this purpose, this paper takes China as a case and employs methods such as spatial autocorrelation analysis, hotspot analysis, and network analysis to construct an intercity migration network of rural migrants and analyze its spatial characteristics and internal structure. The results indicate that the migration pattern of the rural population exhibits notable spatial clustering features. Cities in the eastern and central regions are, respectively, hotspots for the inflow and outflow of rural populations, with internal migration dominating in western cities and relatively inactive rural population movements in northeastern cities. Municipalities directly under the central government, sub-provincial cities, and provincial capitals show a significant tendency to attract rural populations, while prefecture-level and county-level cities mainly radiate rural populations outward. Cities nationwide form seven major clusters in the migration network, and these clusters exhibit distinct structural characteristics. Rural population migration is influenced by various factors. In the future, considerations should focus on the county as the primary unit, attracting rural populations for local employment, and promoting rural revitalization and agriculture development. The findings of this paper are of reference significance not only to China but also to many developing countries with similar national conditions in the world. [ABSTRACT FROM AUTHOR]

During the Programming Period 2014–2020, dozens of Greek cities drafted Integrated Territorial Investment programmes, based on Integrated Sustainable Urban Development Strategies (ITI SUDs). The Strategies justified the selection of intervention and activity areas using socio-economic analysis. The parameters of that analysis, as specified by the National Coordination Authority, reflected the socio-economic and functional parameters highlighted in the relevant EU regulations. This paper uses a recently published methodology in order to estimate and map deprivation in Greek cities with over 100,000 inhabitants, and compares the results with the activity areas identified in the ITI SUDs of those cities. The paper also makes an estimation of the potential for micro-segregation in deprived areas, in an effort to uncover the links between deprivation, built form and social composition at the micro-scale. The analysis shows that deprivation is comparatively more pronounced in Athens and Thessaloniki, and that the use of a common methodology to measuring deprivation, but with customized measurement scales, could support a more targeted allocation of urban policy resources. On the other hand, micro-segregation seems to be a factor worth exploring only in Athens and Thessaloniki, and not in Patra, Larissa, Volos and Heraklion, where the building stock in areas of deprivation is mostly low-rise. [ABSTRACT FROM AUTHOR]

Because of the immense amount of infrastructure in cities, the introduction of vegetation into these constructions is expected to play a critical role in reducing the heat island effect, in mitigating the effects of climate change, and in supporting habitat connectivity and associated biodiversity. Although there is the perception that these solutions can improve the biodiversity of cities, their real value is still unclear. This paper focuses on two aspects of urban greening: green roofs and green walls. It provides a systematic review on biodiversity present in green roofs and walls, through an exhaustive worldwide literature analysis. Arthropods, bats, and birds were the three taxonomic groups analyzed in the papers included in our review. We observed a strong increase in the number of recent publications, thus demonstrating a growing interest in this topic. In summary, we found that green roofs/walls offered additional opportunities for plants and animals to thrive in urban environments because of habitat creation and greater spatial connectivity. In addition, the enhancement of other ecosystem services such as stormwater management and heat island mitigation was noted. By incorporating green features into urban design and planning, cities can support biodiversity while also improving the overall sustainability and livability of urban spaces. [ABSTRACT FROM AUTHOR]

In the knowledge economy era, innovation has become a key emphasis for urban competitions. This paper constructs a theoretical research framework that integrates the basic understandings, influencing factors and ensuing results of intercity innovative competition relations. On the basis of data from the general programs of the National Natural Science Foundation of China from 2005 to 2019, this paper constructs intercity innovative competition relations in China, analyses their spatial distribution and quantitative characteristics, and quantitatively investigates the impact of urban innovation capacity and multidimensional proximity (e.g., geographical proximity, institutional proximity and cognitive proximity) on intercity innovative competition relations through a negative binomial model. The study obtained the following findings: (1) In terms of the overall intercity innovative competition relations, the intensity of China's intercity innovative competition relations gradually increased from 2005 to 2019, with a spatial clustering towards cities with high administrative ranks (e.g., municipalities directly under the central government, sub-provincial cities and provincial capitals); Beijing is always at the centre of innovative competition relations, but its standing has slightly slipped in recent years. (2) From the perspective of disciplines, cities can become benchmarks in particular fields of innovative competitions by competing according to their disciplinary strengths; intercity innovative competition relations in China vary across various academic disciplines. (3) In terms of influencing factors, urban innovation capacity has significant positive effects on intercity innovative competition relations; geographical proximity, institutional proximity and cognitive proximity all have significant positive effects on innovative competition relations; and interactions occur between multidimensional proximities, including a complementary effect between geographical proximity and institutional proximity, a substitutive effect between cognitive proximity and geographical proximity, and a substitutive effect between cognitive proximity and institutional proximity. [ABSTRACT FROM AUTHOR]

Green regeneration has become one of the most powerful strategies for improving the quality of life in cities, supporting climate change adaptation, and reducing the carbon footprints of cities. While it is the ambition of most green regeneration projects to create benefits for residents and users, reality shows that green regeneration also reinforces existing or even shapes new 'green inequalities'. These can result from green gentrification and displacement, procedural injustices, and exclusion from participation or barriers to the access and use of newly created urban green spaces. Set against this background, the paper uses a conflict analysis perspective to look at the inequalities and injustices that evolve within the context of green regeneration. Applying social conflict theory, it seeks to understand (1) why and how green regeneration may lead to inequality and justice conflicts and (2) how conflict analysis helps to understand the nature and implications of green regeneration conflicts in more depth. As for its empirical foundation, the paper reanalyses empirical evidence that was examined in earlier projects on a residential area in the city of Leipzig, Germany. [ABSTRACT FROM AUTHOR]

Thedistribution of products stands out as one of the pivotal activities for logistics companies in recent years, particularly in the aftermath of the COVID-19 pandemic and other geopolitical events. Intense competition compels companies to efficiently execute their logistical processes, with cross-docking emerging as a frequently applied solution. However, the location of cross-dock terminals in urban areas remains a problem insufficiently addressed in the literature, with a dearth of studies and models tackling this issue. This paper introduces a novel and innovative model for locating cross-dock terminals based on the CI-DEA–IDOCRIW–MABAC (Composite Indicators–Data Envelopment Analysis-Integrated Determination of Objective Criteria Weights–Multi-Attributive Border Approximation Area Comparison) methods. In the process of defining input indicators, the following three sources were utilized: relevant literature, practical insights from logistics experts, and the knowledge and experience of the authors. Eight inputs and three outputs were considered (the number of users in the observed channel; the area served by the channel; the average distance a vehicle travels in one delivery; the required number of vehicles; labor availability; competition; construction, and expansion possibilities; proximity to the main infrastructure and traffic facilities; the average number of deliveries; average delivered quantity; and service level). The model underwent testing in a case study analyzing nine distribution channels (areas within the observed urban zone). The results indicated that alternative A4 (in the southwest area) ranked the highest since it was the best-ranked in accordance with the most important criteria, suggesting that the terminal is best located in the southwest zone. The accuracy of the results was confirmed by company management. By developing a completely new model and addressing the identified gap in the literature, this paper provides unequivocal scientific contributions. [ABSTRACT FROM AUTHOR]

Transportation infrastructure is essential to regional innovation systems, and the high-speed railway (HSR) is reshaping China's regional innovation pattern. Previous research lacks an analysis of the impact of opening an HSR on urban traditional and green innovation. This paper uses urban panel data from 285 prefecture-level cities in China from 2003 to 2019 to study the impact and mechanism of opening an HSR on urban innovation from a comparative perspective. The results of a multi-period difference-in-difference (DID) model show that opening an HSR can promote both traditional and green urban innovation, especially impacting urban green innovation. A further analysis of the mechanism of action found that high-quality talent and communication infrastructures are two crucial mechanisms of transmission for the opening of an HSR to affect urban innovation. In addition, heterogeneity analysis showed that opening an HSR promotes traditional urban and green innovation for cities in general. However, for central cities, the opening of an HSR has no significant impact on green innovation and has little effect on promoting traditional innovation. The policy inspiration of this paper is that, in the face of an innovation gap and the inequality of regional innovation and development, the construction of HSRs should be promoted according to local conditions. Construction and layout resources should be shifted from central cities to general cities to narrow the regional innovation gap. In addition, it is necessary to pay attention to the roles of the flow of high-quality talent and communication infrastructure in promoting urban innovation and sustainable urban development. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic, a significant public health emergency, has underscored the criticality of jobs–housing proximity. Static statistical research, however, struggles to uncover the mechanisms underlying jobs–housing balance, providing limited guidance for urban management. This paper adopts the concept of jobs–housing dynamic balance, analyzing the trends in jobs–housing balance in the metropolitan development area of Wuhan in the early and later period of the pandemic from the perspective of individual jobs–housing migration. Using mobile phone signaling data, we identified a stable population of 161,698 residents in June 2019, June 2021, and June 2023, and calculated jobs–housing synchronization and migration impact indices across seven regions. The study finds the following: (1) there is a pronounced misalignment of jobs–housing in the new cities of Wuhan's suburbs, with clear asynchronous in-migration and out-migration; (2) COVID-19 initially led to a unidirectional exodus of the local population for job purposes, significantly contributing to regional jobs–housing imbalance, followed by a partial rebound in the later stages; and (3) the stability of jobs–housing balance in suburban new cities lacking policy support and comprehensive urban functions is worse, primarily due to insufficient employment resilience and the out-migration of the employed population. This paper puts forward a set of recommendations for the sustainable development of suburban new cities. It offers insights into the theoretical advancement of jobs–housing balance and the dynamic, refined transformation of urban studies, enhancing urban managers' understanding of human–place interactions and new city construction. [ABSTRACT FROM AUTHOR]

In response to the international appeal of developing low-carbon economy and realizing carbon peaking and neutrality goals, China has been exploring the construction of the carbon emissions trading market for years. Without the guidance of advanced technology, there would not be a low-carbon economy in the first place. Based on panel data of 30 provinces and cities in China from 2005 to 2020, this paper takes Beijing—which is the first pilot city in China—as the only treated group and uses the Synthetic Control Method to study the impact of the pilot policy on low-carbon technology innovation. The results show that, firstly, the number of low-carbon technology patents in Beijing increases significantly after the implementation of the pilot policy, proving a positive influence on technology innovation. Secondly, the policy effect has a certain time lag and is sensitive to the shock from both domestic and foreign carbon market, but this effect is gradually stable over time. This paper confirms that technological innovation is the key means of promoting the development of the low-carbon economy and calls on various carbon trading markets to pay attention to the internal mechanism of promoting low-carbon technology innovation to stimulate the vitality of market entities. [ABSTRACT FROM AUTHOR]

The in-depth participation and application of new-generation information and communication technologies, such as big data, Internet of Things, artificial intelligence, etc., in the field of smart cities have promoted their abilities in urban fine governance, public services, ecological livability, scientific and technological innovation, etc. Smart cities are gradually becoming recognized as the best solution to "urban problems". Smart city construction drives urban innovative development, accumulates kinetic energy for economic growth, strengthens social support functions, enhances the effectiveness of the ecological environment, and promotes the convergence and integration of urban green development and high-quality development. This paper constructs a difference-in-differences model based on propensity score matching. Additionally, fiscal science and technology investment is introduced as mediating variables to further explain the mechanism through which smart city pilot policy impacts urban green and high-quality development. This research uses panel data from 156 prefecture-level cities in China from 2006 to 2019 to empirically test that the construction of smart cities has a significant positive effect on urban green and high-quality development. The mediation effect model shows that an increase in the level of local government's fiscal science and technology investment enhances the positive effect of smart city construction on urban green and high-quality development. This research concludes with policy recommendations: the government should seize the development opportunity presented by smart city pilot policy, providing necessary policy support and financial incentive for the construction of smart cities. This will optimize the local economic structure, transform the driving forces of urban development, and assist cities in achieving green and high-quality development. [ABSTRACT FROM AUTHOR]

Wildfires have short- and long-term impacts on the geoenvironment, including the changes to biogeochemical and mechanical properties of soils, landfill stability, surface- and groundwater, air pollution, and vegetation. Climate change has increased the extent and severity of wildfires across the world. Simultaneously, anthropogenic activities—through the expansion of urban areas into wildlands, abandonment of rural practices, and accidental or intentional fire-inception activities—are also responsible for a majority of fires. This paper provides an overall review and critical appraisal of existing knowledge about processes induced by wildfires and their impact on the geoenvironment. Burning of vegetation leads to loss of root reinforcement and changes in soil hydromechanical properties. Also, depending on the fire temperature, soil can be rendered hydrophobic or hydrophilic and compromise soil nutrition levels, hinder revegetation, and, in turn, increase post-fire erosion and the debris flow susceptibility of hillslopes. In addition to direct hazards, wildfires pollute air and soil with smoke and fire suppression agents releasing toxic, persistent, and relatively mobile contaminants into the geoenvironment. Nevertheless, the mitigation of wildfires' geoenvironmental impacts does not fit within the scope of this paper. In the end, and in no exhaustive way, some of the areas requiring future research are highlighted. [ABSTRACT FROM AUTHOR]

Cities were at the center of the COVID-19 pandemic due to the concentration of affected populations and economic activities that needed to be revived to support global recovery. While cities offer strong economic and social benefits due to density, proximity, and global connectivity, the pandemic had a tremendous impact on their vital functions. It resulted in lost lives and livelihoods and deepened economic and social divides. Furthermore, the pandemic exacerbated many existing environmental challenges in cities. This presented an opportunity to tackle these interlinked challenges in an integrated manner. Evidence suggests that many city leaders integrated environmental sustainability as an important element to complement their emergency responses. Drawing from experiences in cities around the world, particularly those participating in the Sustainable Cities Program supported by the Global Environment Facility (GEF), this paper describes how integrated solutions were applied to tackle the COVID-19 pandemic. Consistent with a Healthy Planet Healthy People concept, a framework is proposed for sustainable urban transformation and to build cities that are resilient to shocks and stresses. With global environmental benefits at the core, the framework highlights the importance of integration, inclusion, and innovation as key approaches in steering the future green growth and prosperity of cities. [ABSTRACT FROM AUTHOR]

Over the past two decades, urbanization in China has been advancing rapidly. The intricate effects of urbanization on vegetation growth in the urban core have been studied and reported. However, the percentage of impervious surfaces in the urban core, as defined in previous studies, was relatively low, and included some pixels containing farmland and water bodies. Consequently, their results may be affected by urbanization processes, such as the transformation of land types. Hence, this paper extracted 100% impervious surfaces from 2000 to 2022 as urban core areas in China using a 30 m resolution China land cover dataset (CLCD), which completely excluded the effect of urbanization itself on the experimental results, obtaining the trend of vegetation change in the real urban core area. Employing the remote sensing imagery of the Enhanced Vegetation Index (EVI) from 2000 to 2022, we analyzed the growth of vegetation in 1559 urban cores and the surrounding rural areas in China. The study's findings revealed that the majority of the core areas (85.3%) studied in this paper exhibited a significant (p < 0.05) increase in vegetation, indicating that the various urban greening policies in China have been effective. However, only about 23.7% (369) of the urban core areas showed a faster increase in vegetation than the rural areas. This suggests that for most urban cores (1190), vegetation increase is not as pronounced as it is in surrounding rural areas. Additionally, the EVI rate of change in the urban cores obtained using CLCD versus MODIS land cover data significantly differed. The latter obtained a less pronounced trend of vegetation growth compared to the former, attributable to the disparity in their spatial resolution and the methodology used to define urban areas. The study underscores the importance of vegetation growth and its distribution in various urban core areas to comprehend the dynamics of urban cores' vegetation growth and to offer insights for the subsequent formulation of greening policies. Moreover, data with different resolutions will significantly impact the results, thus highlighting the necessity of employing high spatial resolution data for more comprehensive research. [ABSTRACT FROM AUTHOR]

Urban land is the primary location for manufacturing and services, facilitating the expansion and interconnectedness of economic activities and factor flows to shape various urban land-use performances (ULUP). Exploring these spatial linkages of urban land-use performance can play a crucial role in fostering cohesive urban development. Taking 109 prefecture-level cities as research samples, this paper explores the characteristics and influencing factors of the spatial network associated with ULUP in the Yangtze River Economic Belt through modified gravity model, network analysis and QAP analysis. The analysis shows that ULUP has shown an N-shaped trend over the past two decades. It has formed a network of correlations, with Chongqing, Shanghai, and Wuhan emerging as central nodes. Notably, the correlation predominantly occurs between geographically adjacent cities, with weaker links between the Yangtze River Economic Belt's upstream, midstream, and downstream regions. The network can be divided into four distinct types: main inflow plate, main outflow plate, agent plate, and bidirectional spillover plate. Geographic location is the most significant factor influencing network formation, followed by resource mismatch, economic development, and openness. The study provides theoretical guidance and empirical support for improving the utilisation of urban land and promoting coordinated development. [ABSTRACT FROM AUTHOR]

Industrial land is essential for supply-side structural reforms, particularly in the Chengdu–Chongqing area, Western China's most densely populated and industrially robust region. This area, a pivotal hub linking Southwest China with South Asia and Southeast Asia, is critical for the national strategic layout and regional economic restructuring. Despite its substantial industrial foundation as an old industrial base, internal developmental stagnation has led to an irrational industrial land use structure. This paper analyzed land transaction data from the China Land Market Network (2010–2021) using methods such as kernel density estimation, the standard deviation ellipse method, and Global Moran's I index. The analysis focuses on the spatiotemporal evolution of industrial land marketization and its driving factors in 44 cities within the Chengdu–Chongqing economic circle. The findings aim to enhance the strategic implementation of national policies and regional economic optimization, suggesting intensified development efforts in key cities and promoting integrated growth in potential areas like Suining and Ziyang to foster a conducive environment for high-quality regional development. [ABSTRACT FROM AUTHOR]

Regional integration plays a pivotal role in the socio-economic advancement of various global regions and is closely linked with the expansion of construction land. This expansion is a major contributor to urban carbon emissions. Utilizing a geographical regression discontinuity design (GRDD), this paper estimates the impact of urban construction land expansion on carbon emissions and explores the underlying mechanisms within the regional integration process of the Yangtze River Delta (YRD), China. The findings reveal that urban construction land expansion significantly influences carbon emissions, displaying an inverted "U"-shaped pattern. Furthermore, this expansion affects carbon emissions through the transformation of industrial structures, shifts in consumption patterns, and enhancements in scientific and technological investments. Our findings span the performance of the Yangtze River Delta from its early development stages to a relatively mature phase. This paper also partially reveals how the Yangtze River Delta, with both megacities and large- to medium-sized cities, manages urban construction land expansion during the integration process and strives for low-carbon emissions reduction. These results can provide green growth recommendations that balance socio-economic development, low-carbon emissions, and social equity not only for other urban agglomerations in China but also for similar regions in other developing countries by altering construction land utilization patterns. [ABSTRACT FROM AUTHOR]

The aim of this paper is to analyse ways to upgrade the existing urban and architectural features in the built environment by incorporating and enhancing the use of nature-based solutions (NbSs) in relation to the city of Bucharest, which lacks green spaces mapping and quality studies and literature. The paper draws a comparison between the design elements used in other cities, namely Lisbon, Vienna and Rome. These are also analysed and compared in relation to the integration in a mixed urban development plan for a research-to-business neighbourhood design competition in Măgurele, situated near Bucharest. A matrix of five criteria is used for the analysis: historical context, urban context, nature versus design, use and climate context. In Lisbon, examples range from new green walls, modern green Mediterranean courtyards, NbS in scaffolding and temporary walls, the placing of Miradores around the city to green-and-healthy marketing tools for restaurants. For Vienna, a street is being remodelled in an innovative way using independent green infrastructure designs in existing retrofitted parking units, hotels and residential constructions. For Bucharest, emergent pop-up, small scale, bottom-up solutions push the city's urban fabric beyond the greyish look of socialist-communist background and eclectic late 19th, early 20th century built heritage. For Măgurele, different versions of a modern neighbourhood and street profile design issues are analysed, using 3D renderings that incorporate NbS at various insertion scales. Existing example cases showcase new dimensions and toolsets of the adaptation of the urban fabric based on a more ecosystem-based approach of architectural-urban research by design, as possible instruments that facilitate a Green Transition in urban settings. Covering more cities in the future would add to the impact and contribution of this study. [ABSTRACT FROM AUTHOR]

The latest versions of the Ross-Li model include kernels that represent isotropic reflection of the surface, describe backward reflection of soil and vegetation systems, characterize strong forward reflection of snow, and adequately consider the hotspot effect (i.e., RossThick-LiSparseReciprocalChen-Snow, RTLSRCS), theoretically able to effectively characterize BRDF/Albedo/NBAR features for various land surface types. However, a systematic evaluation of the RTLSRCS model is still lacking for various land cover types. In this paper, we conducted a thorough assessment of the RTLSRCS and RossThick-LiSparseReciprocalChen (RTLSRC) models in characterizing BRDF/Albedo/NBAR characteristics by using the global POLDER BRDF database. The primary highlights of this paper include the following: (1) Both models demonstrate high accuracy in characterizing the BRDF characteristics across 16 IGBP types. However, the accuracy of the RTLSRC model is notably reduced for land cover types with high reflectance and strong forward reflection characteristics, such as Snow and Ice (SI), Deciduous Needleleaf Forests (DNF), and Barren or Sparsely Vegetated (BSV). In contrast, the RTLSRCS model shows a significant improvement in accuracy for these land cover types. (2) These two models exhibit highly consistent albedo inversion across various land cover types (R2 > 0.9), particularly in black-sky and blue-sky albedo, except for SI. However, significant differences in white-sky albedo inversion persist between these two models for Evergreen Needleleaf Forests (ENF), Evergreen Broadleaf Forests (EBF), Urban Areas (UA), and SI (p < 0.05). (3) The NBAR values inverted by these two models are nearly identical across the other 15 land cover types. However, the consistency of NBAR results is relatively poor for SI. The RTLSRC model tends to overestimate compared to the RTLSRCS model, with a noticeable bias of approximately 0.024. This study holds significant importance for understanding different versions of Ross-Li models and improving the accuracy of satellite BRDF/Albedo/NBAR products. [ABSTRACT FROM AUTHOR]

A multi-port energy router (MER) is an important infrastructure for power management and energy storage after an unexpected power outage. In addition, MERs can relate to various emergency electric power sources (EEPSs) and power grids at the same time. Moreover, by putting an MER in mobile energy storage, an MER allows for more flexible energy management and regulation in urban cities. This paper proposes a new topology of MERs composed of a bidirectional AC/DC converter and a partial power processing-based triple active bridge (PPP-based TAB) converter to supply emergency power for an unexpected power outage. This design of an MER improves the power efficiency significantly to realize peer-to-peer (P2P) trading which realizes the bidirectional power transmission among the main power grid, EEPSs such as the battery of electric vehicles (EV), and clients' loads. The control methods of the power transmission of two power electronic converters in MER are also illustrated in this paper to realize the power transmission among the main power grid, clients' loads, and EEPSs. This allows any power source connected to the MER to be used as an input or output to receive or send out power, which greatly improves the utilization of power. In conclusion, the MATLAB/Simulink and experiment test are executed and meticulously presented to validate the practicality of the proposed configuration. [ABSTRACT FROM AUTHOR]

Scientific and technological innovation and ecological progress are important forces for China's high-quality development. Nevertheless, the current body of research seldom explores the mutual dependence and evolutionary patterns of the two regional systems when considering both historical and future perspectives. This paper aims to enhance the current theoretical research framework by focusing on the coastal region of China. It analyzes and predicts the co-evolution and space–time distribution process of two systems by constructing a coupled model and a gray prediction model. The results show the following: (1) the coupling and coordinated development level of the two coastal systems has basically reached the stage of good coupling and coordinated development, and the level has increased, but the gap has gradually increased, and Jiangsu and Guangdong have reached the leading level; (2) the spatial distribution in coastal areas is uneven, showing a convex spatial pattern of "high in the middle and low at both ends"; (3) during the forecast period, the overall coupling and coordination level of the two systems will continue to improve, but individual cities still cannot jump out of the development state of slow development processes. With the aim of fostering the harmonious growth of both systems at both regional and national levels, this paper proposes practical recommendations concerning the establishment of a sustainable interaction mechanism, the evolution of the industrial structure towards ecological sustainability, and the economic contribution to scientific and technological innovation. Furthermore, this article serves as a valuable reference for advancing the sustainable development of other nations. [ABSTRACT FROM AUTHOR]

Utilizing a turnkey approach to deliver a construction project entails significant risks from the contractor's perspective. Essentially, the owner awaits project completion without commitments regarding additional expenditures incurred by the contractor during the project's duration. This paper specifically focuses on estimating and analyzing the contingency value for residential turnkey projects in Saudi Arabia. The contingency value across the project's life cycle is estimated using six Artificial Neural Network (ANN) models, which are compared to identify the best-trained network according to project complexity, contingency factor, and contingency impact during the project phases. The output layer provides the contingency factor percentages for each project phase. A 13-story reinforced concrete (RC) residential building established in one of Saudi Arabia's cities was selected to implement the developed methodology. The contingency estimation, performed using @Risk 7.5 and NeuralTools 7.5, was determined to be 11.34% and was distributed across the five phases of the project's life cycle: 0.30% for predesign, 0.99% for design, 2.61% for preconstruction, 6.33% for construction, and 1.12% for postconstruction. Furthermore, it was found that the estimated contingency varies based on project complexity, which is 7.20% for low complexity, 8.16% for medium complexity, 9.41% for complicated, and 11.34% for very complicated projects. Historical data and peer review approaches are employed to validate the results, both of which are endorsed by professionals in this field. This paper highlights two main contributions: Firstly, it significantly enhances risk management by facilitating a comprehensive understanding and systematic analysis of risks, thus improving the contractors' ability to mitigate potential negative impacts on projects. Secondly, it supports more informed decision-making through the use of advanced techniques to estimate and analyze contingency values. These contributions are critical for contractors engaged in Saudi construction projects, particularly those involving residential buildings. [ABSTRACT FROM AUTHOR]