Search

Digital structured light (SL) profilometry is increasingly used in three-dimensional (3D) measurement technology. However, the nonlinearity of the off-the-shelf projectors and cameras seriously reduces the measurement accuracy. In this paper, first, we review the nonlinear effects of the projector–camera system in the phase-shifting structured light depth measurement method. We show that high order harmonic wave components lead to phase error in the phase-shifting method. Then a practical method based on frequency domain filtering is proposed for nonlinear error reduction. By using this method, the nonlinear calibration of the SL system is not required. Moreover, both the nonlinear effects of the projector and the camera can be effectively reduced. The simulations and experiments have verified our nonlinear correction method. [ABSTRACT FROM AUTHOR]

A 2ω wedge design is proposed with KDP crystal to disperse the unconverted light away from the target in a high power laser facility for inertial confinement fusion. The ultraviolet B-integral problem is released, and about 1.2 times in color separation angle is achieved according to both theoretical and experimental investigations when compared with conventional 3ω wedge. The frequency conversion efficiency is unaffected when the wedge is along the non-sensitive axis of the tripler. [ABSTRACT FROM AUTHOR]

In this paper, we describe the behavior of impurity transport in the HL-2A electron cyclotron resonance heating (ECRH) L-mode plasma. The neon as a trace impurity is injected by the supersonic molecular beam injection (SMBI) technique, which is used for the first time to study the impurity transport in HL-2A. The progression of neon ions is monitored by the soft X-ray camera and bolometer arrays with good temporal and spatial resolutions. The convection and diffusion process of the neon ions are investigated with the one-dimensional impurity transport code STRAHL. The results show that the diffusion coefficient D of neon ions is a factor of four larger than the neoclassical value in the central region. The value of D is larger in the outer region of the plasma (ρ > 0.6) than in the central region of the plasma (ρ < 0.6). The convective velocity directs inwards with a value of ∼ −1.0 m/s in the Ohmic discharge, but it reverses to direct outwards with a value of ∼ 8.0 m/s in the outer region of the plasma when ECRH is applied. The result indicates that the impurity transport is strongly enhanced with ECRH. [ABSTRACT FROM AUTHOR]

We achieve enhanced actuation of the 2nd-order resonance of a microcantilever in a capacitive microcantilever structure featured by a dual coplanar counter electrodes configuration. A torque about the static point of the 2nd eigenmode is generated in this configuration and therefore enables effective actuation of the 2nd-order resonance. It is further confirmed that the torque has the effect of suppressing the 1st-order resonance. As a result, the frequency response curve of the microcantilever beam can be modulated. Our results suggest that electric actuation of any higher-order resonances of the microcantilever can be realized through a rational design of counter electrodes. [ABSTRACT FROM AUTHOR]

Temporal, spectral and spatial characters of 0.3-nm-bandwidth high-energy laser pulse propagating through a long path are studied in detail in one newly constructed beamline of our laser facility. The evolution of propagation, pulse energy and near-field deterioration are analyzed theoretically and experimentally. Substituting argon for air is demonstrated effectively to suppress stimulated rotational Raman scattering and the experimental result provides operating criterion, and engineering parameters for the under-constructed beamlines. [ABSTRACT FROM AUTHOR]

A ZnO layer with rather good crystalline quality (Xmin = 9.4%) is grown on a sapphire substrate by plasma enhanced chemical vapor deposition (PECVD). Rutherford backscattering (RBS)/channeling and high-resolution x-ray diffraction (XRD) are used to characterize the elastic strain in the ZnO epilayer. The tetragonal distortion is positive and depth dependent. It is highest near the interface and decreases towards the sample surface. By combining the results of RBS and XRD, the average elastic strains in the parallel and the perpendicular directions can be calculated to be 0.50% and -0.17%, respectively. [ABSTRACT FROM AUTHOR]

5-at% Mn-doped and undoped BaTiO3 thin films have been grown under different oxygen partial pressures by Pulsed Laser Deposition (PLD) on platinum-coated sapphire substrates. X-ray diffraction (XRD) measurements for all the thin films reveal a similar polycrystalline single-phase perovskite structure. Ferroelectricity is observed in the Mn-doped and undoped BaTiO3 thin films grown under relatively high oxygen partial pressure. Ferromagnetic coupling of the Mn dopant ions, on the other hand, is only seen in Mn-doped BaTiO3 thin films prepared under low oxygen partial pressure in a wide temperature range from 5 K to 300 K, and is attributed to the enhanced exchange coupling between Mn dopants and electrons at oxygen vacancies. Our results show that the leakage current is decreased with the doped Mn, but increases the dielectric loss and decreases the dielectric constant, and the ferroelectricity is impaired. To produce ferromagnetism, oxygen vacancies are necessary, which unfortunately increase the leakage current. This confirms that the mutual interplay between the ferroelectricity and ferromagnetism can be tuned by exchange coupling of the doped-Mn and oxygen vacancies in the BaTiO3 thin films. [ABSTRACT FROM AUTHOR]

Vertically aligned TiO2 nanorods have been prepared directly on Ti foil through a one-step environmentally friendly and template- free solution method. X-ray diffraction, field-emission-scanning electron microscopy, and energy- dispersive X-ray spectroscopy have been employed to characterize the synthesized samples. The control of morphology and size of the TiO2 nanorods can be achieved by varying the solution concentration, hydrothermal temperature, and synthesis time. The influence of nanorod size on the conductivity has been investigated by electrochemical impedance spectroscopy, and the results indicate that the electrical conductivity of thin nanorod arrays is better than that of thick nanorod arrays. Meanwhile, the electrode based on the thin nanorod arrays has shown a highly sensitive and steady photocurrent response under simulated sunlight and UV illumination, which indicates that the nanorod TiO2 arrays could be a candidate for use in optoelectronic sensor. [ABSTRACT FROM AUTHOR]

Different-sized CdSe nanocrystals were synthesized in aqueous solution and were transferred from water into organic solvent using a surfactant. Nanocrystals/polymer hybrid light-emitting diodes were fabricated using the blends of different-sized CdSe and poly(N-vinylcarbazole) (PVK) as emissive layers. By measuring the electroluminescence (EL) properties of the hybrid devices, we found that the excitons were generated in CdSe nanocrystal layers by direct recombination of holes and electrons into CdSe nanocrystals or by the Förster energy transfer of excitons from PVK to CdSe nanocrystals. The photoluminescence spectra of the CdSe:PVK composite films demonstrated that energy transfer from PVK to CdSe was more efficient for the composite film with smaller-sized CdSe nanocrystals. The EL spectra of the hybrid devices with the smallest nanocrystals displayed only one peak, and the origin of the EL emission was clarified by studying the EL spectra under different applied voltages and different mass ratios of CdSe to PVK. [ABSTRACT FROM AUTHOR]

By an experimental finding, for a given radiant point source and a given infrared detector sampling, an optical point spread function (PSF) falling on different positions of an infrared detector focal plane array, will result in different measured PSFs. Those measured PSFs known as decoding kernels will further produce different decoded images. Therefore, this work explores the effect of PSF position bias on decoded images in a wavefront coding infrared imaging system. This paper theoretically analyzes the effect of PSF position bias on decoded images. A simulation is conducted for qualitatively evaluating the effect of PSF position bias on decoded images by mean structural similarity (MSSIM) index. Simulated results prove that the probability for MSSIM index greater than 0.75 is 91.38%, and that for less than 0.5 is only 1.22% but this minority seriously degrades the decoded images. We construct an experimental setup for capturing the raw PSF image at a random position and proposes a procedure to reduce the noise of a raw PSF image. The experimental result demonstrates the feasibility for measuring a PSF to achieve a decoded image with good quality. [ABSTRACT FROM AUTHOR]

A division of a focal plane (DoFP) polarimeter is manufactured by placing a micropolarizer array directly onto the focal plane array (FPA) of a detector. Each element of the DoFP polarimeter is a polarized pixel. This paper proposes a performance model for a polarized pixel. The proposed model characterizes the optical and electronic performance of a polarized pixel by three parameters. They are respectively major polarization responsivity, minor polarization responsivity and polarization orientation. Each parameter corresponds to an intuitive physical feature of a polarized pixel. This paper further extends this model to calibrate polarization images from a DoFP (division of focal plane) polarimeter. This calibration work is evaluated quantitatively by a developed DoFP polarimeter under varying illumination intensity and angle of linear polarization. The experiment proves that our model reduces nonuniformity to 6.79% of uncalibrated DoLP (degree of linear polarization) images, and significantly improves the visual effect of DoLP images. [ABSTRACT FROM AUTHOR]

The ELMy H-mode plasmas realized with the supersonic molecular beam injection (SMBI) are studied in relation to the energy confinement and the heating power for the L–H transition ( in the HL-2A tokamak. A database is assembled for this study based on the ELMy H-mode discharges during the experimental campaigns in the period 2009–2013 at the HL-2A tokamak. The statistical results show that the SMBI is favourable for reaching the H-mode by reducing the heating power at the L–H transition and for the H-mode performance by improving the energy confinement compared with the ordinary gas puffing (GP). The reduction of is about 20% when the density is low, and the energy confinement enhancement factor of 1.5 is achieved with the SMBI. Note that in the database the density dependence of is non-monotonic with the at which the is minimum. Most of data are on the low density branch where the increases with the decrease in density. The minimum of the in HL-2A is comparable to the ITPA multi-machine threshold power scaling . The physics behind the reduction of the with the SMBI is also investigated in relation to the change of the density gradient at the plasma edge, the gas fuelling efficiency, and the recycling. [ABSTRACT FROM AUTHOR]

Because of obvious drawbacks including serious artefacts and noise in a decoded image, the existing wavefront coding infrared imaging systems are seriously restricted in application. The proposed ultra-precision diamond machining technique manufactures an optical phase mask with a form manufacturing errors of approximately 770 nm and a surface roughness value Ra of 5.44 nm. The proposed decoding method outperforms the classical Wiener filtering method in three indices of mean square errors, mean structural similarity index and noise equivalent temperature difference. Based on the results mentioned above and a basic principle of wavefront coding technique, this paper further develops a wavefront coding infrared imaging system. Experimental results prove that our wavefront coding infrared imaging system yields a decoded image with good quality over a temperature range from −40 °C to +70 °C. [ABSTRACT FROM AUTHOR]

Deuterated potassium dihydrogen phosphate damage performance at 351 nm is studied on a large-aperture laser system. Bulk and rear-surface damage are initiated under the 3ω fluences of 6.7 J/cm2 and 3 J/cm2, and show different growth characteristics under multiple laser irradiations with the fluence of 6 J/cm2. The size and number of bulk damage keep unchanged once initiated. However, surface damage size also does not grow, while surface damage number increases linearly with laser shots. Different damage thresholds and growth behaviors suggest different formations of bulk and surface damage precursors. The cause of surface damage is supposed to be near-surface absorbing particles buried under the sol-gel coating. [ABSTRACT FROM AUTHOR]

Laser induced damage experiment is carried out on a large aperture laser facility. Severe damage is observed on a large-aperture fused silica grating which presents dense craters on the front surface and six cracks alternatively located at the front and the rear surface. The bizarre fact about the damage on the grating is that, unlike other optics, the damage craters are almost on the front surface. According to observation, damage phenomenon is due to the stimulated Brillouin scattering (SBS) effect occurring in the grating, which includes the transverse SBS, the back SBS and the zigzag SBS. [ABSTRACT FROM AUTHOR]