Search

In paper production, a jumbo reel is cut into multiple intermediate rolls, and each intermediate roll is then sheeted as finished goods. This problem is called a cutting stock problem and is proven to be NP-hard. The objective is to minimize material waste or trim loss from all the cuttings. In the case that any intermediate roll is not entirely used for its associated order, the intermediate roll itself could turn to be a dead stock. We use the concept of universal sizes of intermediate rolls to eliminate the dead stock. A pre-defined number of universal sizes of intermediate rolls is to be used to serve all the orders. The problem is solved using Reinforcement Artificial Bee Colony algorithm with Integer Linear Programming subroutine. This proposed approach is then tested with a set of 1,055 orders and 127 different sizes of sheet papers from a paper manufacturer. The results reveal that our method outperforms other algorithms. Our method offers the total trim loss of 3.51%, compared to the trim loss reported by the industry of at least 5%. This approach not only reduces the number of partially cut rolls, but also decreases the number of the jumbo reels needed to serve all the orders. Therefore, both the inventory cost and material cost can be saved.

This paper presents a broadband, simple, re-useable and low-cost approach for noninvasive sweat monitoring using a passive microwave circuit and a cellulose filter paper as a superstrate. The proposed sensor is composed of filter paper with the ability to absorb the sample liquid under test (LUT) placed on top of a coplanar waveguide (CPW) transmission line. Various samples of sodium chloride (NaCl) solutions with concentrations in the range of 0.01-2 mol/L and models of artificial sweat are used to test the proposed sensor. The difference in transmission coefficient (S21) between dry and wet states is used to determine the concentrations of tested solutions in the band of 1-6 GHz. The sensor detects concentrations as low as 0.01 mol/L (0.58 g/L) and quantities as low as 137 μL with a maximum sensitivity of 46.7 dB/g/L. The proposed sensor presents a simple approach to sample and characterize liquids with enhanced sensitivity and consistent performance using microwave signals.

Moisture content and aging of oil-paper insulation are two important factors that cause deterioration of the insulation performance of power transformers. The water molecules and aging products are polar, which affects the dielectric response characteristics of the insulation system. Currently, the dielectric response testing technology has realized non-destructive evaluation of the moisture content of transformer insulation. However, the changes in the dielectric response caused by aging products are easily concealed by the influence of moisture, which makes the diagnostic technology ineffective for use in the evaluation of the aging of the oil-paper system. In order to avoid drawback, a new method utilizing frequency domain dielectric spectroscopy (FDS) and the water balance characteristics of the oil-paper insulation is proposed in this paper to evaluate the aging state of oil-paper insulation. The aging of oil-paper insulation will affect the water balance between oil and paper. In this paper, the experimental studies have shown that the water distribution coefficient between oil and paper and the degree of polymerization (DP) of the insulating paper shows a significant linear relationship. Accordingly, in this paper, FDS curves were used to evaluate the moisture content in the insulating paper, oil samples were taken to measure the moisture content in oil, and then the ratio of moisture content in oil and paper were calculated as the aging characteristic parameter. The linear relationship between the characteristic parameter and DP was used to evaluate the aging state of oil-paper insulation. The feasibility of the proposed method is preliminarily verified using oil-paper insulation samples at different aging states and with different moisture levels in the laboratory.

This paper presents the prediction of aging state of oil impregnated insulating Kraft paper using textural properties. Under conditions of prolonged thermal stress, the insulating capacity of Kraft paper decreases due to carbonization and degradation of cellulose. To analyze these effects, a new accelerated aging kit is developed for the experiments. Four groups of samples are collected, and the morphology is examined. Texture feature is extracted for the samples using normalization and Gray-Level Co-occurrence Matrix (GLCM). Supervised (Support Vector Machine (SVM)) and unsupervised (K-means) machine intelligence methods are trained to classify images based on the feature. In addition, new samples are checked for feasibility of the prediction of aging state. The calculated training accuracy of SVM is 92.67%, and for k-means is 95.0%, on the other hand, the testing accuracy of SVM is 91.0%, and for k-means is 92.6%. Therefore, this machine intelligence-based methodology using image features is effective in classifying the aging state of the Kraft Insulating Paper. [ABSTRACT FROM AUTHOR]

In forensic document analysis, the authenticity of a document must be properly checked in the context of suspected forgery. Hyperspectral Imaging (HSI) is a non-invasive way of detecting fraudulent papers in a multipage document. The occurrence of a forged paper in a multi-page document may have a substantial difference from rest of the papers in its age, type, color, texture, and so on. Each pixel in an HSI data can be used as the material fingerprint for the spatial point it corresponds to. Hence, hyperspectral data of paper samples made of the same substance have similar characteristics and can be grouped into a single cluster. Similarly, paper samples made of different substances have different spectral properties. This paper relies on this heuristic and proposes a tensor based clustering framework for hyperspectral paper data, with an application to detect the forged papers in multi-page documents. Information embedded in the hyperspectral patches of the papers to be clustered is arranged into individual lateral slices of a third-order tensor in this framework. Further, this work employs the self-expressiveness property of submodules and an objective function is formulated to extract self-expressive representation tensor with low multirank and f-diagonal structure. Objective function of the proposed method incorporates $l_{\frac {1}{2}}$ -induced Tensor Nuclear Norm (TNN) and $l_{\frac {1}{2}}$ regularization to impart better low rankness and f-diagonal structure to the representation tensor. Experimental results of the proposed method were compared to the state-of-the-art subspace clustering approaches. The results demonstrate improved performance of the proposed method over the existing clustering algorithms.

Currency recognition has always been a troublesome task for blind and visually impaired people (BVIP). The problem is more severe in developing countries such as India, where there is still a lack of robust currency recognition systems. BVIP primarily relies on size variations and patterns such as intaglio printings for recognizing the underlying currency denominations. Most of the current Indian legal tenders resemble in size, thus making the identification process more strenuous. Also, the engraved patterns are not as distinctive as BVIP standards, and they fade over time. For an automated paper currency recognition system, issues such as folded or partial views, uneven illumination, and background clutter make it non-trivial and challenging. This paper ventures to present an end-to-end and robust framework for assisting BVIP in recognizing the Indian paper currency denomination. This paper presents a lightweight network, IPCRNet, useful in a resource-constrained environment such as low/medium level smartphones. The proposed network is based on Dense connection, Multi-Dilation, and Depth-wise separable convolution layers. Additionally, we congregated one of the most diversified Indian paper currency image dataset with more than 50,000 images belonging to almost all denominations in circulation. A customized and publically available android application, “Roshni-Currency recognizer”, has also been introduced. The experimental results on multiple datasets demonstrate the superiority of the proposed model. IPCRNet improves the classification accuracy by more than 2% on the proposed dataset compared to the state-of-the-art networks.

In this era, research and development are becoming a continuous and accelerating process because technology changes rapidly with a short lifecycle. As a result, various methodologies are being developed to monitor these rapidly changing research trends; In particular, clustering method-related studies in science and technology documents are being developed with a variety of approaches. However, previous studies on document clustering methods focus on a specific field or language but do not take into consideration certain important pieces of information in science and technology documents. Therefore, this study proposes an embedding methodology that uses important content from scientific and technical documents. We took into consideration the importance of information containing core structures in science and technology documents and proposed a clustering methodology that analyzes structured and unstructured data, such as textual information, author information, and citation information. The proposed method combines both textual and structural data from the paper, using a method that focuses on screening important information by sections in science and technology documents. Then, Girvan-Newman clustering and Louvain clustering models are applied to generate embedding vectors and show evaluation results through the clustering indices. As a practical example, we applied the proposed methodology using paper data from the field of hydrogen cell vehicles. The results of this study will be effective in identifying gaps in technology for new technological development, identifying technology trends, and presenting directional information for future technology development.

When the inner insulation of oil-impregnated paper bushing breaks down in service, gases decomposed by oil and paper may cause an explosion. The explosion of bushing occurs from time to time because of the lack of an effective monitoring method. In order to provide an effective online monitoring method for the bushing to avoid explosion, this paper presents a method to monitor the PD defect in bushing by measuring the inner pressure of bushing. In this paper, the relationship of variation between characteristic gases content and inner pressure is studied, the effect of inner temperature on inner pressure is analyzed and the method for reducing this effect is also presented, and the monitoring method is proved to be useful by PD tests on a real bushing. The results show that the inner pressure increases obviously due to the generation of characteristic gases by internal discharge in oil-impregnated paper bushing, and the pressure increases with the deterioration of the discharge; although the inner pressure has a great influence on the inner pressure, the influence can be reduced or eliminated greatly by the method of common-mode rejection. According to the results, the internal discharge defect of the oil-impregnated paper bushing can be detected by monitoring the pressure, and the bushing explosion can be avoided.

The aging of the transformer oil-paper insulation distributes spatially, which results in changes in paper resistivity in different regions. This paper establishes an iterative inversion algorithm using the finite element method to calculate the oil-immersed paper resistivity in different regions of a transformer. This algorithm sets the transformer dielectric loss factor tan δ at low frequency, the dielectric parameters of the transformer oil as inputs and the oil-immersed paper resistivity as output. The resistivity obtained from inversion can be used as a reference to access the insulation state of the oil-paper insulation. This paper aims at achieving the nondestructive detection of the partial state of the oil-paper insulation.

Globally, the recommendation services have become important due to the fact that they support e-commerce applications and different research communities. Recommender systems have a large number of applications in many fields, including economic, education, and scientific research. Different empirical studies have shown that the recommender systems are more effective and reliable than the keyword-based search engines for extracting useful knowledge from massive amounts of data. The problem of recommending similar scientific articles in scientific community is called scientific paper recommendation. Scientific paper recommendation aims to recommend new articles or classical articles that match researchers' interests. It has become an attractive area of study since the number of scholarly papers increases exponentially. In this paper, we first introduce the importance and advantages of the paper recommender systems. Second, we review the recommendation algorithms and methods, such as Content-based, collaborative filtering, graph-based, and hybrid methods. Then, we introduce the evaluation methods of different recommender systems. Finally, we summarize the open issues in the paper recommender systems, including cold start, sparsity, scalability, privacy, serendipity, and unified scholarly data standards. The purpose of this survey is to provide comprehensive reviews on the scholarly paper recommendation.

The volume of research articles in digital repositories is increasing. This spectacular growth of repositories makes it rather difficult for researchers to obtain related research papers in response to their queries. The problem becomes worse when a researcher with insufficient knowledge of searching research articles uses these repositories. In the traditional recommendation approaches, the results of the query miss many high-quality papers, in the related work section, which are either published recently or have low citation count. To overcome this problem, there needs to be a solution which considers not only structural relationships between the papers but also inspects the quality of authors publishing those articles. Many research paper recommendation approaches have been implemented which includes collaborative filtering-based, content-based, and citation analysis-based techniques. The collaborative filtering-based approaches primarily use paper-citation matrix for recommendations, whereas the content-based approaches only consider the content of the paper. The citation analysis considers the structure of the network and focuses on papers citing or cited by the paper of interest. It is therefore very difficult for a recommender system to recommend high-quality papers without a hybrid approach that incorporates multiple features, such as citation information and author information. The proposed method creates a multilevel citation and relationship network of authors in which the citation network uses the structural relationship between the papers to extract significant papers, and authors' collaboration network finds key authors from those papers. The papers selected by this hybrid approach are then recommended to the user. The results have shown that our proposed method performs exceedingly well as compared with the state-of-the-art existing systems, such as Google scholar and multilevel simultaneous citation network.

Paper-based strain sensors have attracted attention as a cost-effective and environmentally friendly approach to wearable electronic devices. This paper proposes a paper-based strain sensor created solely using hand-painting, which is a simple, equipment-free process utilized in green electronics. Commercial printing paper is coated with polydimethylsiloxane diluted with heptane, which provides moisture resistance and mechanical robustness while increasing the hydrophobicity of the surface. The electrodes and conduction channels are fabricated using a pencil for graphite deposition and a brush for the deposition of tin-doped indium oxide nanoparticles, respectively. With a gauge factor of 41.98 in tensile strain tests and 21.36 in compressive strain tests, our strain sensor exhibits a good sensitivity that is similar to that of previously reported paper-based sensors. We also demonstrate that our proposed strain sensor can be used as a weak motion detection device for humans and robots.

The accelerating rate of scientific publications makes it extremely difficult for researchers to find out the relevant papers and related works. Recommender systems that aim at solving the information overload problem have attracted lots of attention. However, existing paper recommendation works generally rely on the simple citation-ships between papers, which ignore the heterogeneity of the academic graphs. In this paper, we solve the personalized paper recommendation problem in the setting of heterogeneous information networks. A heterogeneous graph representation based recommendation method named HGRec is proposed. First, the author and paper profiles are constructed based on the extracted contents information. Second, we initialize the node vectors by employing the word-embedding technique. Third, we jointly update the node embeddings in the heterogeneous graph by proposing two meta-path based proximity measures. Finally, the paper recommendation is completed by calculating the similarity of the generated author and paper feature vectors. We present experiments on a real academic network, the DBLP network. The comparative results demonstrate the effectiveness of the proposed personalized recommendation approach compared to state-of-the-art methods.

Transformer insulation paper is a key indicator for transformer remaining operational life. Paper decomposition is evaluated using the degree of polymerization (DP) which calls for samples of insulation paper from operating transformers. Since collecting such paper samples is extremely difficult, other indicators have been used to indirectly reveal the DP value of insulation paper. This includes dissolved gases in transformer oil such as carbon oxides and hydrocarbon gases, furan compounds, methanol, ethanol, and moisture along with some oil characteristics such as interfacial tension. However, for the same oil sample, these individual parameters lead to different DP values. This is attributed to the lack of accuracy of the established mathematical and artificial intelligence models correlating DP with each of the above mentioned individual parameters. This paper presents a self-learning method to estimate the DP value of transformer insulation paper based on multiple transformer oil aging parameters. The proposed method comprises data processing, fuzzy c-means and linear regression. Results reveal that estimating the DP value based on multiple aging parameters is more accurate than estimating it using one single parameter as per the current practice. The proposed method not only helps to understand the correlation between multiple oil aging parameters and the DP value of paper insulation, but also promotes the establishment of more accurate life assessment models for power transformers based on these oil aging parameters.

Failures of bushing caused by corrosive sulfur has gradually appeared in recent years. Apart from copper and sulfur, certain amount of aluminum was also found both in oil and paper after disassembling. The corrosion mechanism of the aluminum foil and its effect on oil-paper insulation were unknown. In this study, series of sulfur corrosion experiments were taken to investigate the sulfur corrosion of aluminum foil. The results showed the aluminum foil could certainly be corroded in oil containing corrosive sulfur (DBDS). Thermal products of insulting paper triggered the corrosion by removing the alumina film on the surface. Then, the contact corrosion occurred between aluminum and DBDS. In addition, the mechanisms of corrosion products generation both in oil and on paper were studied. The corrosion products in oil was DBDS-Al(3,4) and that on paper was RCOOAln. It caused the decrease of electrical properties of oil-paper. Particularly, the dielectric loss of oil and paper were dramatically enhanced.

Oil-immersed insulation paper (OIP) bushing is one of the most important equipment in power transmission and distribution systems. Moisture is one of the most serious factors that affect the insulation status of OIP bushing. In this paper, the OIP bushing was assumed to be in a stable and simplicity condition, and then the transient moisture distribution of capacitor core and its effects on the electric field were studied. First, by dissecting a 110 kV OIP bushing, the specific sizes for modelling were obtained. Afterwards, a moisture diffusion model for OIP bushing was established based on COMSOL Multiphysics software, and it was also verified by moisture diffusion experiment. Then, the moisture distribution for different conditions were obtained and analyzed. Finally, a model for the electric field of OIP bushing was established, and then the effects of moisture on the electric field were studied.

Studying the moisture diffusion in non-oil-immersed insulation paper is helpful to optimize the drying process and improve the drying efficiency of oil-immersed equipment. Moisture diffusion factor (MDF) is the key parameter to describe the moisture diffusion in non-oil-immersed insulation paper. Thermal aging affects the moisture absorption capacity of insulation paper obviously, thus, this paper intends to modify the empirical expression of MDF by considering the effects of thermal aging. The transient moisture contents of non-oil-immersed insulation paper with different thicknesses were measured at 40 °C and 60 °C, respectively. Then, the experimental values of MDF were extracted, and the empirical expression of MDF was modified by considering the effects of thermal aging. Finally, the modified expression of MDF was verified. The following conclusion can be obtained: 1) the equilibrium time constant of non-oil-immersed insulation paper increases with thermal aging; 2) the moisture absorption rate of non-oil-immersed insulation paper decreases with thermal aging, and; 3) the modified expression of MDF is reasonable and effective.

Researchers from academia and the corporate-sector rely on scholarly digital libraries to access articles. Attackers take advantage of innocent users who consider the articles' files safe and thus open PDF-files with little concern. In addition, researchers consider scholarly libraries a reliable, trusted, and untainted corpus of papers. For these reasons, scholarly digital libraries are an attractive-target and inadvertently support the proliferation of cyber-attacks launched via malicious PDF-files. In this study, we present related vulnerabilities and malware distribution approaches that exploit the vulnerabilities of scholarly digital libraries. We evaluated over two-million scholarly papers in the CiteSeerX library and found the library to be contaminated with a surprisingly large number (0.3-2%) of malicious PDF documents (over 55% were crawled from the IPs of US-universities). We developed a two layered detection framework aimed at enhancing the detection of malicious PDF documents, Sec-Lib, which offers a security solution for large digital libraries. Sec-Lib includes a deterministic layer for detecting known malware, and a machine learning based layer for detecting unknown malware. Our evaluation showed that scholarly digital libraries can detect 96.9% of malware with Sec-Lib, while minimizing the number of PDF-files requiring labeling, and thus reducing the manual inspection efforts of security-experts by 98%.

Kevlar pulp treated with low-temperature plasma and nano cellulose fibrils (NCFs) have been introduced as reinforcements in the preparation for composite insulating paper with low relative permittivity, dielectric loss, good mechanical properties, and thermal stability. More polar groups of Kevlar fibers could be exposed after plasma treatment. Results showed that the relative permittivity of the composite paper containing 20% Kevlar pulp, 10% NCF, and 70% softwood pulp is decreased by 29.6% and the dielectric loss is decreased by 43.2% at 50 Hz, 25°, compared with the conventional paper formed by pure softwood pulp. The change was due to the introduction of Kevlar pulp with intrinsic low dielectric constant and loss, which decreases the whole polarizability of the paper. The mechanical properties of the composite paper became worse after introducing 20% Kevlar pulp. About 10% NCF can work as a mechanical reinforcement to compensate for the tensile and Yang's modulus loss. Scanning electron microscopy results showed that NCF could fill the void defects and improve the interface bonding of the fibers to enhance the paper mechanical properties. The composite paper also had better insulating and thermal properties than the conventional paper. It has been concluded that the Kevlar pulp/NCF/softwood pulp composite paper has the potential to replace the pure softwood paper for the application of high-voltage ac transformer insulation.

Evolutionary game dynamics is a combination of game theory and dynamical systems. Using dynamical theory, we investigate chaotic behavior in asymmetric Rock-Paper-Scissors games under imitative dynamics with two different populations. Our theoretical analysis and numerical simulations demonstrate that the dynamical system can give rise to chaotic behavior in zero-sum and positive-sum asymmetric games. However, chaos cannot occur in a negative-sum asymmetric game. In particular, the numerical simulations show that there is a limit cycle in a negative-sum asymmetric game.

Music generation using deep learning has received considerable attention in recent years. Researchers have developed various generative models capable of imitating musical conventions, comprehending the musical corpora, and generating new samples based on the learning outcome. Although the samples generated by these models are persuasive, they often lack musical structure and creativity. For instance, a vanilla end-to-end approach, which deals with all levels of music representation at once, does not offer human-level control and interaction during the learning process, leading to constrained results. Indeed, music creation is a recurrent process that follows some principles by a musician, where various musical features are reused or adapted. On the other hand, a musical piece adheres to a musical style, breaking down into precise concepts of timbre style, performance style, composition style, and the coherency between these aspects. Here, we study and analyze the current advances in music generation using deep learning models through different criteria. We discuss the shortcomings and limitations of these models regarding interactivity and adaptability. Finally, we draw the potential future research direction addressing multi-agent systems and reinforcement learning algorithms to alleviate these shortcomings and limitations.

The intent of this work is to evaluate the influence of cellulose insulation paper on gassing tendency of transformer oil under electrical discharge conditions. For comprehensive enumeration, insulation oil was thermally stressed at 115°C as per ASTM D 1934 with a controlled thermal aging history. The thermally aged oils were considered for gassing tendency evaluation as per ASTM D 6180 (5 hours, 10 kV AC) in the presence of cellulose. Different cellulose Kraft paper proportions including 0, 10, 20, and 30% of aged oil were introduced in to discharge cell. Different cellulose proportions and aging conditions were considered to understand the impact of cellulose while understanding the decomposition aspects of insulation. Diagnostic measurements with those including dissolved gas analysis, moisture, interfacial tension, turbidity, dissolved decay contents, acidity, and dissipation factor were performed before and after gassing tendency evaluation. It was found that, cellulose paper aids significantly in increasing dissolved gases and moisture in oil during electrical discharge. Importantly, diagnostic measurements have shown the ability of paper to absorb certain decomposition products during the discharge process. [ABSTRACT FROM AUTHOR]