Search

Real-time transient stability simulation is of paramount importance for system security assessment and to initiate preventive control actions before catastrophic events such as blackouts happen. Transient stability simulation of realistic power systems involves the solution of a large set of nonlinear differential-algebraic equations in the time-domain which requires signi icant computational resources. Exploitation of parallel processing techniques can provide an efficient and cost-effective solution to this problem. This paper proposes a fully parallel method known as instantaneous relaxation (IR) for real-time transient stability simulation. To validate the proposed method, two test systems have been implemented on an advanced PC-cluster-based real-time simulator. A comparison of the captured real-time results with those from the PSS/E software shows high accuracy. [ABSTRACT FROM AUTHOR]

This paper demonstrates the use of a slow-coherency-based generator grouping algorithm and a graph theoretic approach to form controlled islands as a last resort to prevent cascading outages following large disturbances. The proposed technique is applied to a 30 000-bus, 5000-generator, 2004 summer peak load, Eastern Interconnection data and demonstrated on the August 14, 2003 blackout scenario. Adaptive rate of frequency decline-based load shedding schemes are used in the load rich islands to control frequency. The simulation results presented show the advantage of the proposed method in containing the impact of the disturbance within the islands formed and in preventing the impact of the disturbance from propagating to the rest of the system. This is demonstrated by the significant reduction in line flows in the rest of the system and by improved voltage and relative angle characteristics. Based on the suggestion in the joint U.S.-Canadian task force final report on the blackout, load shedding without any islanding is also performed, and results obtained are compared with the proposed controlled islanding method. The islanding method outperforms the load shedding-only method in reducing the transmission line flows, but both methods have similar effects on voltage and relative angle behavior. [ABSTRACT FROM AUTHOR]