Search

This article presents an efficient and fast echelon battery equalization method based on wide voltage range bidirectional converter combined with DBSCAN (density-based spatial clustering of applications with noise) clustering control strategy. Thanks to the wide voltage range and bidirectional buck-boost characteristics of the four-switch bidirectional converter, the battery energy can be reasonably redistributed between the battery and the super capacitor. The converter operating in synchronous rectification mode can not only achieve bidirectional energy flow in a wide voltage range, but also has a high energy conversion efficiency. The DBSCAN clustering algorithm is used to divide all battery cells into groups, and each group may contain one or more adjacent and nonadjacent battery cells. First, the nonadjacent single cells are balanced and integrated into adjacent group with the closest voltage. Then, the groups with different voltages are balanced by group-to-group, thereby realizing rapid balance of the entire battery pack. In order to verify the effectiveness of the proposed method, simulations and experimental verification were carried out. The experimental results show that, comparing with traditional battery balancing methods, the proposed method achieves shorter balancing time and higher balancing efficiency. [ABSTRACT FROM AUTHOR]

Lithium-ion (Li-ion) batteries are nowadays the best tradeoff between performance, cost, and lifetime to store electric power and energy effectively. The reliable determination of the batteries’ instantaneous power capability and energy content is mandatory for many mobile high-energy and power-consuming applications. Herein, the battery impedance and state of charge (\SOC) are the relevant values. In energy storage systems, these values are to be considered for each battery cell individually, due to arising limitations caused by cell-specific variations. Simple algorithms to determine the battery system’s impedance and \SOC are presented including parameter and state-estimation techniques. Furthermore, methods are derived making the impedance and \SOC determination possible for a large number of particular cells in a battery system. The applicability of the demonstrated algorithms for battery control unit implementation is proved incorporating data achieved from load scenarios applied to a cell stack Li-ion battery module. Cell impedance and \SOC variations could be detected precisely. Moreover, a combination of impedance and \SOC spread was identified during typical battery operation. [ABSTRACT FROM PUBLISHER]