Search

In order to be more efficient in the optimization of concrete mixture, a new intelligent optimization model of concrete mixture was established by using particle swarm optimization on the basis of the original optimization model, and the specific performance was fitted and predicted by using the support vector machine. Using the optimization model established in this work, the test results of 1,443 groups of mixed ratios show that the prediction accuracy of the new model is better than that of the traditional model. The average relative errors of the 7‐ and 28‐day compressive strengths and initial collapse were 10.42%, 7.43%, and 17.14%, respectively. This method is used in a practical project where a set of C25, C30, C35, and C40 concrete mix ratios are designed. The prediction and actual error of 7‐day intensity and 28‐day intensity are −14.4% to −6.1% and −17.6% to 0.6%, respectively, while the predicted value and actual slump error are 15%. The results show that the error between the measured value and the design value is basically within 15%, which meets the design requirements. The method can reduce the time and cost of concrete production, with the cost per cubic meter after optimization is 3.5–8 CHY lower than the concrete mix calculated by the conventional method. The relative decrease ranges from 1.53% to 3.22%. Finally, a practical quality and cost control system (compos) is established to make the strategy easier to apply. [ABSTRACT FROM AUTHOR]

Recently, renewable energy sources integrated with microgrid (MG) networks have provided safe, secure, and reliable power supply to both utility and industrial purposes. Power quality disturbances (PQDs) seriously affect the performance of MG networks and reduce the lifecycle of numerous sensitive devices in MG networks. Hence, this paper presents a new approach to detect and classify the PQDs using discrete wavelet transform, multiresolution analysis, and optimized‐kernel support vector machine. The obtained unique features from DWT‐MRA are fed to train the well‐known intelligent classifiers. In the optimized‐kernel SVM model, computing power is enhanced for classifying multiple PQ events based on the local density and leave‐one‐out (LOO) algorithm. To get higher separation in feature space, the kernel width of each sample is estimated based on the local density. By using the LOO method, an improved grid search strategy is implemented to get the penalty parameter to achieve satisfactory results. Moreover, a typical MG network is simulated in MATLAB software considering the validation of the proposed technique to address the power quality issues in MG networks, and the results of the proposed method are compared with other conventional ML classifiers. The simulation results confirm that the proposed method is more effective and accurate than other intelligent classifiers. [ABSTRACT FROM AUTHOR]

The vibration signal from the planetary gearbox exhibits nonlinear and impulsive characteristics amidst strong noise, impeding the effective extraction of fault information and compromising the accuracy of fault diagnosis. To address this challenge, a fault diagnosis method rooted in feature mode decomposition (FMD) is proposed. Initially, the critical parameters (modal number n and filter length L) of FMD are optimized using an improved genetic algorithm (IGA), and the refined FMD is employed to decompose the vibration signals from the planetary gearbox. Subsequently, a convolutional neural network integrated with the support vector machine model (CNN‐SVM) is established, leveraging the convolutional neural network for feature extraction. Ultimately, SVM iteratively optimized by the particle swarm optimization (PSO) algorithm, serves as the classification technique. Simulation and experiment results demonstrate the effectiveness of this method in extracting and identifying fault information within planetary gearboxes. [ABSTRACT FROM AUTHOR]

Breast cancer is currently one of the most prevalent cancers affecting women globally. Uncontrolled growth and division of breast cells lead to the formation of tumors, marking the onset of breast cancer. Predicting breast cancer is essential for early detection, making treatment plans, and implementing preventive measures, ultimately improving patient outcomes and reducing mortality rates. In recent years, numerous studies have been published to predict breast cancer where researchers use a variety of methods. Most investigations have been conducted using narrow and specific datasets, often resulting in a lack of accuracy. Such methods may not be suitable for clinical use. The study aims to address the limitations of existing models in terms of robustness and generalization across diverse datasets. In our study, we employed two metaheuristic algorithms, namely, genetic algorithm (GA) and chemical reaction optimization (CRO) with machine learning techniques, including support vector machine (SVM), decision tree, random forest, and XGBoost. GA and CRO are used to optimize the feature selection process. It enables machine learning algorithms to predict more accurately. Experiments were conducted on three datasets, namely, Wisconsin Breast Cancer (WBC), Breast Cancer‐the University of California, Irvine (BC‐UCI), and Breast Cancer Coimbra (BCC) datasets. The datasets contain 569, 286, and 116 instances, respectively. The classifiers with optimized features consistently outperformed the classifiers without feature optimization in terms of accuracy, precision, recall, specificity, and F1 score. Among the compared methods published recently, our method attained the highest accuracies of 99.64% in the WBC dataset and 98% in the BCC dataset, as well as the second highest accuracy of 99.12% in the BC‐UCI dataset. Comparative analysis demonstrated the superiority of our approach over existing methods. [ABSTRACT FROM AUTHOR]

Drying plays a pivotal role in the production of tobacco. Unlike many other drying processes, tobacco drying exhibits significant nonlinearity and is influenced by numerous factors, rendering accurate predictions challenging. In light of these characteristics, in order to improve the accuracy of tobacco moisture content prediction, in this study, an improved support vector machine regression model was used to simulate the complex dynamic process in the tobacco drying process. Addressing the inherent limitations of differential particle swarm optimization (DPSO), we introduce the chemotaxis operation of bacterial compartmentalization algorithm to guide particles to move to optimal positions during searching. Additionally, we propose particle rotation to improve diversity of search space by changing particle position to facilitate their escape from local optimization and avoid premature convergence of particles. Ultimately, the SVR–QBDPSO model is established by integrating support vector regression (SVR) and Quaternion bacteria‐specific chemotaxis differential particle swarm optimization (QBDPSO). The experimental results demonstrate that this model outperforms other models when applied to the production data of tobacco. [ABSTRACT FROM AUTHOR]

Objective. One of the most frequent consequences of diabetes mellitus has been identified as diabetic peripheral neuropathy (DPN), and numerous inflammatory disorders, including diabetes, have been documented to be reflected by the neutrophil‐to‐lymphocyte ratio (NLR). This study aimed to explore the correlation between peripheral blood NLR and DPN, and to evaluate whether NLR could be utilized as a novel marker for early diagnosis of DPN among those with type 2 Diabetes Mellitus (T2DM). Methods. We reviewed the medical records of 1154 diabetic patients treated at Tongji Hospital Affiliated to Tongji University from January 2022 to March 2023. These patients did not have evidence of acute infections, chronic inflammatory status within the past three months. The information included the clinical, laboratory, and demographic characteristics of the patient. Finally, a total of 442 T2DM individuals with reliable, complete, and accessible medical records were recruited, including 216 T2DM patients without complications (DM group) and 226 T2DM patients with complications of DPN (DPN group). One‐way ANOVA and multivariate logistic regression were applied to analyze data from the two groups, including peripheral blood NLR values and other biomedical indices. The cohort was divided in a 7 : 3 ratio into training and internal validation datasets following feature selection and data balancing. Based on machine learning, training was conducted using extreme gradient boosting (XGBoost) and support vector machine (SVM) methods. K‐fold cross‐validation was applied for model assessment, and accuracy, precision, recall, F1‐score, and the area under the receiver operating characteristic curve (AUC) were used to validate the models' discrimination and clinical applicability. Using Shapley Additive Explanations (SHAP), the top‐performing model was interpreted. Results. The values of 24‐hour urine volume (24H UV), lower limb arterial plaque thickness (LLAB thickness), carotid plaque thickness (CP thickness), D‐dimer and onset time were significantly higher in the DPN group compared to the DM group, whereas the values of urine creatinine (UCr), total cholesterol (TC), low‐density lipoprotein (LDL), alpha‐fetoprotein (AFP), fasting c‐peptide (FCP), and nerve conduction velocity and wave magnitude of motor and sensory nerve shown in electromyogram (EMG) were considerably lower than those in the DM group (P < 0.05, respectively). NLR values were significantly higher in the DPN group compared to the DM group (2.60 ± 4.82 versus 1.85 ± 0.98, P < 0.05). Multivariate logistic regression analysis revealed that NLR (P = 0.008, C = 0.003) was a risk factor for DPN. The multivariate logistic regression model scores were 0.6241 for accuracy, 0.6111 for precision, 0.6667 for recall, 0.6377 for F1, and 0.6379 for AUC. Machine learning methods, XGBoost and SVM, built prediction models, showing that NLR can predict the onset of DPN. XGBoost achieved an accuracy of 0.6541, a precision of 0.6316, a recall of 0.7273, a F1 value of 0.6761, and an AUC value of 0.690. SVM scored an accuracy of 0.5789, a precision of 0.5610, a recall of 0.6970, an F1 value of 0.6216, and an AUC value of 0.6170. Conclusions. Our findings demonstrated that NLR is highly correlated with DPN and is an independent risk factor for DPN. NLR might be a novel indicator for the early diagnosis of DPN. XGBoost and SVM models have great predictive performance and could be reliable tools for the early prediction of DPN in T2DM patients. This trial is registered with ChiCTR2400087019. [ABSTRACT FROM AUTHOR]

Background. Functional near‐infrared spectroscopy (fNIRS) is being extensively explored as a potential primary screening tool for major depressive disorder (MDD) because of its portability, cost‐effectiveness, and low susceptibility to motion artifacts. However, the fNIRS‐based computer‐aided diagnosis (CAD) of MDD using deep learning methods has rarely been studied. In this study, we propose a novel deep learning framework based on a convolutional neural network (CNN) for the fNIRS‐based CAD of MDD with high accuracy. Materials and Methods. The fNIRS data of participants—48 patients with MDD and 68 healthy controls (HCs)—were obtained while they performed a Stroop task. The hemodynamic responses calculated from the preprocessed fNIRS data were used as inputs to the proposed CNN model with an ensemble CNN architecture, comprising three 1D depth‐wise convolutional layers specifically designed to reflect interhemispheric asymmetry in hemodynamic responses between patients with MDD and HCs, which is known to be a distinct characteristic in previous MDD studies. The performance of the proposed model was evaluated using a leave‐one‐subject‐out cross‐validation strategy and compared with those of conventional machine learning and CNN models. Results. The proposed model exhibited a high accuracy, sensitivity, and specificity of 84.48%, 83.33%, and 85.29%, respectively. The accuracies of conventional machine learning algorithms—shrinkage linear discriminator analysis, regularized support vector machine, EEGNet, and ShallowConvNet—were 73.28%, 74.14%, 62.93%, and 62.07%, respectively. Conclusions. In conclusion, the proposed deep learning model can differentiate between the patients with MDD and HCs more accurately than the conventional models, demonstrating its applicability in fNIRS‐based CAD systems. [ABSTRACT FROM AUTHOR]

Mobile devices (e.g., tablets and smartphones) have been rapidly integrated into the lives of children and have impacted how children engage with digital media. The portability of these devices allows for sporadic, on-demand interaction, reducing the accuracy of self-report estimates of mobile device use. Passive sensing applications objectively monitor time spent on a given device but are unable to identify who is using the device, a significant limitation in child screen time research. Behavioral biometric authentication, using embedded mobile device sensors to continuously authenticate users, could be applied to address this limitation. This study examined the preliminary accuracy of machine learning models trained on iPad sensor data to identify the unique user of the device in a sample of children ages 6 to 11. Data was collected opportunistically from nine participants (8.2 ± 1.75 years, 5 female) in the sedentary portion of two semistructured physical activity protocols. SensorLog was downloaded onto study iPads and collected data from the accelerometer, gyroscope, and magnetometer sensors while the participant interacted with the iPad. Five machine learning models, logistic regression (LR), support vector machine, neural net (NN), k-nearest neighbors (k-NN), and random forest (RF), were trained using 57 features generated from the sensor output to perform multiclass classification. A train-test split of 80%–20% was used for model fitting. Model performance was evaluated using F 1 score, accuracy, precision, and recall. Model performance was high, with F 1 scores ranging from 0.75 to 0.94. RF and k-NN had the highest performance across metrics, with F 1 scores of 0.94 for both models. This study highlights the potential of using existing mobile device sensors to continuously identify the user of a device in the context of screen time measurement. Future research should explore the performance of this technology in larger samples of children and in free-living environments. [ABSTRACT FROM AUTHOR]

Compressive strength of concrete is an important parameter in the design of concrete structures and the prediction of their durability. Therefore, it is of great significance to predict the compressive strength of concrete. In this study, a fully connected neural network model is developed using the PyTorch framework to predict the compressive strength of concrete and compared with six other machine learning models. These models are multiple linear regression, K-nearest neighbor regression, support vector machine, decision tree, random forest, light gradient boosting machine, and artificial neural network. The model is trained using 4,253 data with seven input parameters, including cement (C), fly ash (F), mineral powder (K), fine aggregate (FA), coarse aggregate (CA), water reducer admixture (WRA), and water (W). Three thousand six hundred twenty-one data in the datasets are used to train the prediction model after data cleaning, and 632 data are used to validate the model. The results show that the fully connected neural network model based on PyTorch frame can predict the compressive strength of concrete with higher accuracy. Therefore, it is a reliable and useful method to optimize the artificial network model. So, it has important application value in practice. The strength of concrete can be predicted in advance, making the project more efficient and reducing costs. Besides, by adjusting the mix ratio, combining the strength prediction results in different environments and industries to ensure the quality of construction. [ABSTRACT FROM AUTHOR]

Stroke is a high morbidity and mortality disease that poses a serious threat to people's health. Early recognition of the various warning signs of stroke is necessary so that timely clinical intervention can help reduce the severity of stroke. Deep neural networks have powerful feature representation capabilities and can automatically learn discriminant features from large amounts of data. This paper uses a range of physiological characteristic parameters and collaborates with deep neural networks, such as the Wasserstein generative adversarial networks with gradient penalty and regression network, to construct a stroke prediction model. Firstly, to address the problem of imbalance between positive and negative samples in the stroke public data set, we performed positive sample data augmentation and utilized WGAN‐GP to generate stroke data with high fidelity and used it for the training of the prediction network model. Then, the relationship between observable physiological characteristic parameters and the predicted risk of suffering a stroke was modeled as a nonlinear mapping transformation, and a stroke prediction model based on a deep regression network was designed. Finally, the proposed method is compared with commonly used machine learning‐based classification algorithms such as decision tree, random forest, support vector machine, and artificial neural networks. The prediction results of the proposed method are optimal in the comprehensive measurement index F. Further ablation experiments also show that the designed prediction model has certain robustness and can effectively predict stroke diseases. [ABSTRACT FROM AUTHOR]

This paper introduces an innovative approach, Deep Multiscale Soft-Threshold Support Vector Data Description (DMS-SVDD), designed for the detection of anomalies and prediction of faults in heavy-duty gas turbine generator sets (GENSETs). The model combines a support vector data description (SVDD) with a deep autoencoder backbone network framework, integrating a multiscale convolutional neural network (M) and soft-threshold activation network (S) into the Deep-SVDD framework. In comparison with conventional methods, such as One-Class Support Vector Machine (OCSVM) and autoencoder (AE), DMS-SVDD demonstrates improvements in accuracy (by 22.94%), recall (by 32%), F1 score (by 12.02%), and smoothness (by 39.15%). The model excels particularly in feature extraction, denoising, and early fault detection, offering a proactive strategy for maintenance. Furthermore, the DMS-SVDD demonstrated enhanced training efficiency with a reduction in the convergence rounds by 66% and overall training times by 34.13%. The study concludes that DMS-SVDD presents a robust and efficient solution for gas turbine anomaly detection, with practical advantages for decision support in turbine maintenance. Future research could explore additional refinements and applications of the DMS-SVDD model across diverse industrial contexts. [ABSTRACT FROM AUTHOR]

The widespread integration of renewable energy sources (RESs) into power systems using power electronics-based interface devices has led to a substantial rise in power quality (PQ) issues. There is an immediate requirement for effective monitoring, detection, and classification of power quality disturbances (PQDs) that is needed to take remedial measures and design planning of the system architecture. This study presents a hybrid approach with an objective for the feature extraction and classification of PQDs. The proposed hybrid approach is comprised of an optimized tunable-Q wavelet transform (OTQWT) for the feature extraction and incremental support vector machine (ISVM). A four-stage approach is suggested for the PQ detection and classification in this study. In the first stage, the various data are retrieved both in the form of synthetic data by mathematical formulations and real-time data with prototype design setup. In the second stage, regardless of the specified wavelet function, the PQD signals are decomposed into low-pass and high-pass sub-bands using the tunable-Q wavelet transform (TQWT). However, the utilization of default decomposition parameters to address nonstationary PQ signals may lead to information loss and reduced performance of the system. To avoid this limitation, an OTQWT as an enhanced technique to TQWT based on an Adaptive Particle Swarm Optimization (APSO) is suggested. A modified objective function based on the mean square error (MSE) is used to improve the decomposition process. In the third stage, an efficient classifier is suggested based on the ISVM. Lastly, to test and evaluate the performance of the proposed approach, twelve types of PQDs including noise and multiple occurrences are considered. The comparative analysis with other popular methods reflects the better performance of the proposed approach and justifies its use for PQ detection and classification purposes in real-time​ conditions. [ABSTRACT FROM AUTHOR]

The study of pipeline corrosion is crucial to prevent economic losses, environmental degradation, and worker safety. In this study, several machine learning methods such as recursive feature elimination (RFE), principal component analysis (PCA), gradient boosting method (GBM), support vector machine (SVM), random forest (RF), K-nearest neighbors (KNN), and multilayer perceptron (MLP) were used to estimate the thickness loss of a slurry pipeline subjected to erosion corrosion. These different machine learning models were applied to the raw data (the set of variables), to the variables selected by RFE, and to the variables selected by PCA (principal components), and a comparative analysis was carried out to find out the influence of the selection and transformation of the data on the performance of the models. The results show that the models perform better on the variables selected by RFE and that the best models are RF, SVM, and GBM with an average RMSE of 0.017. By modifying the hyperparameters, the SVM model becomes the best model with an RMSE of 0.011 and an R -squared of 0.83. [ABSTRACT FROM AUTHOR]

The respiratory disease of coronavirus disease 2019 (COVID-19) has wreaked havoc on the economy of every nation by infecting and killing millions of people. This deadly disease has taken a toll on the life of the entire human race, and an exact cure for it is still not developed. Thus, the control and cure of this disease mainly depend on restricting its transmission rate through early detection. The detection of coronavirus infection facilitates the isolation and exclusive care of infected patients. This research paper proposes a novel data mining system that combines the ensemble feature selection method and machine learning classifier for the effective identification of COVID-19 infection. Different feature selection approaches including chi-square test, recursive feature elimination (RFE), genetic algorithm (GA), particle swarm optimization (PSO), and random forest are evaluated for their effectiveness in enhancing the classification accuracy of the machine learning classifiers. The classifiers that are considered in this research work are decision tree, naïve Bayes, K -nearest neighbor (KNN), multilayer perceptron (MLP), and support vector machine (SVM). Two COVID-19 datasets were used for testing from which the best features supporting the dataset were extracted by the proposed system. The performance of the machine learning classifiers based on the ensemble feature selection methods is analyzed. [ABSTRACT FROM AUTHOR]

Recent experience with the strongest earthquakes greater than magnitude 5.4 in Korea leads to public interest in the safety and resilience of critical infrastructures. There are many nuclear power plants near the epicenters of the earthquakes. Nuclear power plants are essential infrastructures that provide stable and enough energy for human life, and simultaneously, control systems for the safety and security of nuclear power plants are critical due to the risk of nuclear accidents on public health and the environment. The nuclear area uses probabilistic risk assessment to estimate the risk of structures, systems, and components in nuclear power plants, and the evaluation of the fragility curve is a key process for probabilistic risk assessment. The challenges of a seismic fragility analysis lie in estimating the influence of various uncertainties in material, geometry, and earthquake and improving the existing fragility analysis methods, which require time-consuming nonlinear time history analysis. Thus, this paper conducts a multivariate seismic fragility analysis using surrogate models for reinforced concrete squat shear walls and proposes a simplified closed form equation for a chosen surrogate seismic demand model. The surrogate models are trained and validated by several approaches: response surface method, support vector machine, Gaussian process regression, and neural network. In addition, a correlation analysis is used to evaluate the relative importance of the variables to the seismic demand to simplify the surrogate model further. Finally, simplified surrogate models based on the importance of the variables are proposed as closed form of polynomials, and the performance of these models on the fragility analysis is evaluated. [ABSTRACT FROM AUTHOR]

Gas reservoir development and the estimation of rock properties heavily rely on lithology classification, which can be difficult, time-consuming, and prone to errors. In this study, a novel deep learning-based approach has been developed for the rapid, accurate, and efficient prediction of lithology in a gas field from conventional well-log data. The well-logs, referred to as numerical well-logs (NWLs), are transformed into two-dimensional images through two proposed approaches: shallow images (SIs) and deep images (DIs). In these images, the pixels effectively represent the relationships between different logs. For this purpose, we developed residual convolutional neural networks (ResCNN) named SIs-ResCNN 2D and DIs-ResCNN 2D. The feed data for DIs-ResCNN 2D are images created and referred to as DIs, which are initially formed from a vector in which the order of logs is somehow repeated, ensuring that each pairwise combination occurs only once. This resulted in the incorporation of the connection between the logs within the pixels of the generated images, alongside the integration of unique binary combinations of the logs. We compared the proposed models, including DIs-ResCNN 2D, DIs-ResCNN 2D, and NWLs-ResCNN 1D with baseline methods such as random forest (RF), K-nearest neighbor (KNN), and support vector machine (SVM). Based on the evaluation metrics, DIs-ResCNN 2D outperformed the other proposed and baseline methods on the test dataset. A balanced DIs-ResCNN 2D model achieved 93% accuracy and F1-score of 80% on a test well, highlighting the importance of data balancing during CNN model training. [ABSTRACT FROM AUTHOR]

Bridges situated on small-radius reverse curves play a pivotal role within some railway networks, exerting influence over project-wide design progress. Typically, assessing the safety of bridge design parameters necessitates laborious vehicle-bridge dynamic coupling vibration numerical analysis or model experiments. To streamline the design process and enhance efficiency during the preliminary design phase, we propose an efficient method to assess the dynamic performance of bridges on small-radius reverse curves. This approach enables direct prediction of bridge dynamic performance based on design parameters, eliminating the need for numerical simulations and model experiments. We first develop a vehicle-bridge coupling vibration program grounded in train-curve bridge coupling vibration theory, validated using on-site measured data. Subsequently, through numerical simulation experiments, we evaluate 80 simply supported beam bridges on small-radius reverse curves under various operating conditions, generating ample dynamic response data for bridge pier tops and girders. These data are then compared with regulatory thresholds to assign dynamic performance labels. After identifying essential design parameters as data features using Fisher scores, we proceed to input these features into a support vector machine (SVM). Through supervised training with dynamic performance labels, this process empowers the SVM model to predict the dynamic performance of the bridge. Our results demonstrate that this method circumvents the need for detailed vehicle-bridge interaction analysis, yielding an impressive 86.9% accuracy in predicting dynamic performance and significantly boosting computational efficiency. Besides, the top five design parameters that significantly influence the prediction of bridge dynamic performance are obtained. This novel approach has the potential to expedite design assessments and enhance safety in railway bridge construction. [ABSTRACT FROM AUTHOR]

The primary aim of this study is to explore the utility of machine learning algorithms for predicting personal PM2.5 exposures of elderly participants and to evaluate the effect of individual variables on model performance. Personal PM2.5 was measured on five consecutive days across seasons in 66 retired adults in Beijing (BJ) and Nanjing (NJ), China. The potential predictors were extracted from routine monitoring data (ambient PM2.5 concentrations and meteorological factors), basic questionnaires (personal and household characteristics), and time-activity diary (TAD). Prediction models were developed based on either traditional multiple linear regression (MLR) or five advanced machine learning methods. Our results revealed that personal PM2.5 exposures were well predicted by both MLR and machine learning models with predictors extracted from routine monitoring data, which was indicated by the high nested cross-validation (CV) R 2 ranging from 0.76 to 0.88. The addition of predictors from either the questionnaire or TAD did not improve predictive accuracy for all algorithms. The ambient PM2.5 concentrations were the most important predictor. Overall, the random forest, support vector machine, and extreme gradient boosting algorithms outperformed the reference MLR method. Compared with the traditional MLR approach, the CV R 2 of the RF model increased up to 7% (from 0.82 ± 0.13 to 0.88 ± 0.10), while the RMSE reduced up to 18% (from 19.8 ± 5.4 to 16.3 ± 4.5) in BJ. [ABSTRACT FROM AUTHOR]

As a kind of thermal control device, fluid loop systems must operate with the demands of high safety, high reliability, and long life. In order to accurately assess the health status of fluid loop systems, a hierarchical multi-information fusion (HMIF) method is proposed in this paper. Considering that fluid loop systems generally have distinct structural hierarchies, the health evaluation process in this method is divided into three levels, which are the indicator level, the component level, and the system level. In the evaluation process, the health indices are, respectively, constructed to quantify the health status at the three levels. At the indicator level, One-Class support vector machine algorithm is used to obtain the distribution space of each state monitoring indicator under a normal state. The indicator-level health indices are evaluated by calculating the ratio of the data located in the distribution space to the overall data. At the component level, a fuzzy theory is used to calculate the health indices of the component level. Health indices at the indicator level are first converted to membership degree by membership degree function. Then, the evaluation fusion strategy is used to deduce the membership degree of the component level. The health indices at the component level are obtained from the mapping relationship between the membership degree and the health index. At the system level, an adaptive weight adjustment strategy is proposed to fuze all component-level health indices. Taking a practical fluid loop system as an example, health indices at the three levels evaluated by the HMIF method are compared with the actual status. The results indicate that the proposed method can correctly judge the health state of the system and provide a reference for the maintenance and fault diagnosis of fluid loop systems. [ABSTRACT FROM AUTHOR]

This paper proposes a diagnosis method based on time series and support vector machine (SVM) to improve the timeliness, accuracy, and feasibility of fault diagnosis for photovoltaic (PV) arrays. It obtains the nominal output power of the PV array based on real-time collected data such as voltage, current, radiation, and temperature and normalizes the power values at different time points throughout the day to form a time series. Using the time series values as input data for a "one-to-one" multiclass classifier, we can identify and classify typical operational faults such as random shading, fixed shading, and aging degradation of PV arrays. The developed algorithmic model is trained and tested for different fault conditions using the data sets generated by the PV array simulation device. The experimental results show that our model has fairly good reliability and accuracy, and to some extent, it solves the problem of classifying shading and aging faults, two of which exhibit rather similar degradation characteristics. [ABSTRACT FROM AUTHOR]

The air-conditioning systems have become an indispensable part of our daily life for keeping the quality of life. However, to improve the thermal comfort and reduce energy consumption is crucial to use the air conditioners effectively with rapid development of artificial intelligence technology. This study explored the correlation between the response of human physiological parameters and thermal sensation voting (TSV) to evaluate the comfort level among various cold and hot stimulations. The variations of the three physiological parameters, which were body surface temperature, skin blood flow (SBF), and sweat area on the skin surface, and TSV values were all positively correlated with the stimulation amount under the stimulation of cold wind, hot wind, and heat radiation, but the relationship was not completely linear. Among the three physiological parameters, the forehead skin temperature has the closest relationship with TSV, followed by the SBF and sweat. Among three stimulations, the cold wind stimulation causes the closest relationship between TSV and forehead temperature, followed by the radiation and hot wind stimulations. Through three different machine learning models, namely, random forest (RF) model, support vector machine (SVM) model, and neural network (NN) model, the stimulation of cold wind, hot wind, and heat radiation was applied to investigate the variation of the three physiological parameters as the input of the models. Moreover, the models were evaluated and verified by TSV. The results revealed that among the three different machine learning methods, RF had the best accuracy. The established thermal comfort models can predict the real-time user's thermal comfort feeling, so that air-conditioning equipment's performance can be optimized to create a healthy and energy-saving comfortable environment. [ABSTRACT FROM AUTHOR]

To meet the personalized distribution needs of customers, comprehensively consider customer value, the urgency of customer needs, and the impact of priority distribution to the customer on the enterprise, and based on regional restrictions, put forward vehicle-drone joint distribution path optimization problem considering customer priority. First, the goal is to minimize the sum of total distribution cost and customer priority cost integrating soft time windows and constructing a path optimization model of the vehicle-drone joint distribution. Second, a two-stage hybrid algorithm is proposed for the problem model. In the first stage, the deep neural network and the grid search improved support vector machine algorithm (DNN-GSM-SVM) are used to screen and classify customer priority features, and in the second stage, adaptive large-scale neighborhood search improved genetic algorithms (ALNS-GA) are used to solve the problem of vehicle-drone joint distribution path planning problem. Finally, combined with the numerical example, the optimization scheme of the vehicle-drone joint distribution path considering priority is analyzed. Compared with the three algorithms and error analysis, the effectiveness of the model and the two-stage algorithm was verified. Compared with the results of the scheme that does not consider priority, the results show that priority can significantly improve customer satisfaction. The efficiency of the vehicle-drone joint distribution was verified by comparing the three scenarios. [ABSTRACT FROM AUTHOR]

The objective of this study was to determine whether multi-microRNA analysis using a combination of four microRNA biomarkers (miR-1246, 202, 21, and 219B) could improve the diagnostic performance of mammography in determining breast cancer risk by age group (under 50 vs. over 50) and distinguish breast cancer from benign breast diseases and other cancers (thyroid, colon, stomach, lung, liver, and cervix cancers). To verify breast cancer classification performance of the four miRNA biomarkers and whether the model providing breast cancer risk score could distinguish between benign breast disease and other cancers, the model was verified using nonlinear support vector machine (SVM) and generalized linear model (GLM) and age and four miRNA qRT-PCR analysis values (dCt) were input to these models. Breast cancer risk scores for each Breast Imaging-Reporting and Data System (BI-RADS) category in multi-microRNA analysis were analyzed to examine the correlation between breast cancer risk scores and mammography categories. We generated two models using two classification algorithms, SVM and GLM, with a combination of four miRNA biomarkers showing high performance and sensitivities of 84.5% and 82.1%, a specificity of 85%, and areas under the curve (AUCs) of 0.967 and 0.965, respectively, which showed consistent performance across all stages of breast cancer and patient ages. The results of this study showed that this multi-microRNA analysis using the four miRNA biomarkers was effective in classifying breast cancer in patients under the age of 50, which is challenging to accurately diagnose. In addition, breast cancer and benign breast diseases can be classified, showing the possibility of helping with diagnosis by mammography. Verification of the performance of the four miRNA biomarkers confirmed that multi-microRNA analysis could be used as a new breast cancer screening aid to improve the accuracy of mammography. However, many factors must be considered for clinical use. Further validation with an appropriate screening population in large clinical trials is required. This trial is registered with (KNUCH 2022-04-036). [ABSTRACT FROM AUTHOR]

The objective to preserve residual hearing during cochlear implantation has recently led to the use of intracochlear electrocochleography (ECochG) as an intraoperative monitoring tool. Currently, a decrease in the amplitude of the difference between responses to alternating-polarity stimuli (DIF response), predominantly reflecting the hair cell response, is used for providing feedback. Including other ECochG response components, such as phase changes and harmonic distortions, could improve the accuracy of surgical feedback. The objectives of the present study were (1) to compare simultaneously recorded stepwise intracochlear and extracochlear ECochG responses to 500 Hz tone bursts, (2) to explore patterns in features extracted from the intracochlear ECochG recordings relating to hearing preservation or hearing loss, and (3) to design support vector machine (SVM) and random forest (RF) classifiers of acoustic hearing preservation that treat each subject as a sample and use all intracochlear ECochG recordings made during electrode array insertion for classification. Forty subjects undergoing cochlear implant (CI) surgery at the Oslo University Hospital, St. Thomas' Hearing Implant Centre, or the University Hospital of Zurich were prospectively enrolled. In this cohort, DIF response amplitude decreases did not relate to postoperative acoustic hearing preservation. Exploratory analysis of the feature set extracted from the ECochG responses and preoperative audiogram showed that the features were not discriminative between outcome classes. The SVM and RF classifiers that were trained on these features could not distinguish cases with hearing loss and hearing preservation. These findings suggest that hearing loss following CI surgery is not always reflected in intraoperative ECochG recordings. [ABSTRACT FROM AUTHOR]

In the Three Gorges reservoir area, the overhead upright pier is the primary structural form. For intelligent monitoring of existing terminals, this research chooses Chongqing Xintian Port as the study object and proposes a support vector machine (SVM) damage-inducing factor (DIF) inversion model based on particle swarm optimization (PSO). To apply the finite element method to analyze the stress distribution characteristics of quay pile groups under three main DIFs, including the stacking effect, ship impact load effect, and bank slope effect. After characterizing the stress data, it becomes evident that there exists a correlation between stress and each DIF parameter. Before generating the training sample set, principal component analysis is employed to reduce dimensionality and eliminate a substantial amount of redundant data. The model has an accuracy of 0.999 for the identification of the type of DIF and 0.975 for the identification of the location of the action of the DIF with F1 coefficients of 0.999 and 0.978, respectively. For the strength of DIF predictions, MAE and MSE were 4.871 and 1.202, respectively, R2 was 0.986, NSE was 0.986, WI was 0.996, and PBIAS was 0.095. After extracting every sample, the relative error for the ship impact load effect is 0.05, and the highest relative error for the bank slope effect is 0.02; the error for the stacking effect is limited to 0.08. The results suggest that the damage inducement inversion model of the SVM optimized by the PSO algorithm can effectively identify the DIF of the overhead upright pier. [ABSTRACT FROM AUTHOR]

The electroencephalogram (EEG) examination provides information on the brain's electricity, especially in cases of epilepsy. Since the characteristics of EEG signals are nonlinear and nonstationary, visual inspection becomes very difficult. To overcome this problem, digital EEG signal processing was developed. Automatic epileptic EEG recognition is an area of interest on which much research focuses. The complexity approach to EEG signal analysis is interesting to be used as feature extraction, referring to the nonlinear characteristics of the signal. This study proposed an automatic epileptic EEG classification method based on the multiscale Hjorth descriptor measurement. EEG signals consisting of normal, interictal, and seizure (ictal) were simulated. The signal is scaled into new signals using the coarse-grained procedure on a scale of 1–20. Then, the Hjorth parameter which consists of activity, mobility, and complexity is calculated on the new signal. This process produces a feature vector that is used in the classification stage. Support vector machine (SVM) is used to evaluate the proposed feature extraction method. Simulation results showed that the Hjorth parameter on a scale of 1–15 yields 99.5% accuracy. The proposed method is expected to be applied to digital EEG for seizure detection and prediction. [ABSTRACT FROM AUTHOR]

Sensible and judicious utilization of water for agriculture in conjunction with prediction techniques increases the crop yield. The Ethiopian economy relies on and is exclusively dependent on agricultural-based activities. Different soil compositions (nitrogen, phosphorous, and potassium), crop alternation, soil dampness, and climate conditions play an imperative contribution in cultivation. The primary purpose of this study was to conduct a machine learning approach which can be practiced dynamically for efficient farming at a low cost. The support vector machine (SVM) was applied as a machine learning procedure, whereas long short-term memory (LSTM) and the recurrent neural network (RNN) were considered as deep learning procedures. The research comprised a model that is combined with machine learning procedures (ANN, random forest, and decision tree) to know efficient and appropriate crop types. The planned model is improved through conducting deep learning methods incorporated to the existing practice for different crop condition. Pure data and related evidence are attained concerning the quantities of soil constituents desired through their expenditures distinctly. It delivers well precision as compared to the current model examining the specified documents and assisting the local agronomists in forecasting different types of crop and gain benefits. In RNN, LSTM, and SVM algorithms, the accuracy is determined as 96% which is comparatively preferable as compared to other machine learning procedures under different feature and crop types. The techniques are evaluated in terms of percentage in prediction accuracy. The results generated are important for agrarians, experts, researchers, and local farmers to maximize the crop productivity and help to enhance agriculture and climate change-related decisions, especially in low-to-middle-income countries. [ABSTRACT FROM AUTHOR]

The cyber-physical power system (CPPS) is a modern infrastructure utilising information and communication technology that has become more vulnerable to cyberattacks in recent years. The attack magnitude injected by the adversary is stealthier and it cannot be detected using conventional bad data detection techniques. Protecting sensitive data from data integrity attacks (DIA) is essential for ensuring system security and reliability. A tragic event will occur if the attack goes unreported. Therefore, DIA detection is highly vital for the operator in the control centre to make important decisions. This paper addresses the attack impact on WAC applications and attack detection using the model-based method and data-driven-based methods. On the basis of the validation of performance indicators, various detection approaches are simulated and compared to determine the best detection strategy. Simulation results show that in the model-based anomaly detection method, the recursive polynomial model estimator (RPME) has better detection performance than the recursive least square estimator (RLSE). The convolutional neural network- (CNN-) based data-driven anomaly detection technique outperforms other machine learning (ML) techniques such as support vector machine (SVM), K-nearest neighbour (KNN), and random forest (RF). On the WSCC 3 machine 9-bus system, the efficacy of the suggested methods is evaluated. [ABSTRACT FROM AUTHOR]

Bearings are critical components in modern manufacturing, yet they are prone to failures in induction machines. Detecting these faults early can reduce repair costs. To achieve efficient and accurate fault detection, we explore vibration-based analysis. Traditional methods rely on manual feature extraction, which is time-consuming. In contrast, our work leverages deep learning, particularly convolutional neural networks, to automatically extract fault features from raw data. We investigate various image sizes (16 × 16, 32 × 32, 64 × 64, 128 × 128, 256 × 256) and their performance in bearing fault diagnosis. Our convolutional neural networks-based approach is compared to traditional methods such as support vector machine, nearest neighbors, and artificial neural networks. Results demonstrate the superior performance of our data-driven fault diagnosis using convolutional neural networks. [ABSTRACT FROM AUTHOR]

Credit-risk prediction is one of the challenging tasks in the banking industry. In this study, a hybrid convolutional neural network—support vector machine/random forest/decision tree (CNN—SVM/RF/DT) model has been proposed for efficient credit-risk prediction. We proposed four classifiers to develop the model. A fully connected layer with soft-max trained using an end-to-end process makes up the first classifier and by deleting the final fully connected with soft-max layer, the other three classifiers—a SVM, RF, and DT classifier stacked after the flattening layer. Different parameter values were considered and fine-tuned throughout testing to select appropriate parameters. In accordance with the experimental findings, a fully connected CNN and a hybrid CNN with SVM, DT, and RF, respectively, achieved a prediction performance of 86.70%, 98.60%, 96.90%, and 95.50%. According to the results, our suggested hybrid method exceeds the fully connected CNN in its ability to predict credit risk. [ABSTRACT FROM AUTHOR]

Accurate delineation of debris-flow-endangered areas (e.g., the maximum runout distance) is a necessary prerequisite for the debris-flow risk assessment and countermeasures design. Recently, machine-learning models have been proved to be an effective tool in predicting debris-flow parameters. However, existing machine-learning models are generally developed based on a very limited number of observation data, which may result in the predictive model overfitting or underfitting. How to develop a robust model for accurate forecasting of debris-flow-endangered areas still remains a difficult task. This paper proposes a hybrid method for predicting debris-flow hazard zone by integrating machine-learning algorithms and an empirical regression model. The proposed method takes the calculated maximum runout distance obtained from the empirical model as supplementary inputs to increase the amount of training data to construct hybrid machine-learning models. Three commonly used machine-learning models (i.e., multivariate adaptive regression splines (MARS), random forest (RF), and support vector machine (SVM)) are developed based on the training datasets of a specific debris basin. Then, these three machine-learning models are combined with an empirical relationship developed using the same training datasets to generate corresponding hybrid models. Finally, the performance metrics (i.e., coefficient of determination (R2), root-mean-square error (RMSE), and mean absolute error (MAE)) of the proposed hybrid models are comprehensively investigated and compared with the single predictive model (i.e., MARS, RF, SVM, and the empirical model) under fivefold cross-validation. The proposed method is illustrated using 134 channelized debris-flow events in Sichuan province, China. Results show that compared with the three individual machine-learning models, hybridization of machine-learning algorithms and the empirical model results in R2, RMSE, and MAE improved by 70.5%, 32.9%, and 41.1%, respectively. In contrast to the empirical model, the R2, RMSE, and MAE value of the proposed hybrid models are improved by 29.6%, 22.3%, and 32.5%, respectively. The proposed hybrid models generally perform better than the single machine-learning and the empirical model, providing a promising tool for accurate forecasting of a debris-flow-endangered area. [ABSTRACT FROM AUTHOR]

This paper investigates the effectiveness of machine learning (ML) models available in MATLAB Regression Learner app and MATLAB App Designer, both low-code applications, for accurately predicting punching shear strength (PSS) in reinforced concrete (RC) slabs. A database of 379 RC slab samples without transverse reinforcement was compiled from renowned publications. RandomSearch and Bayesian optimisation were employed for tuning hyperparameters. The performance of these models was compared with six empirical models, which included three current design codes, three equations from other researchers, and 227 finite-element simulations conducted by the authors. The ML models and finite-element method (FEM) demonstrated superior performance compared with the literature and practical codes. Furthermore, the results emphasised the exceptional performance of the Gaussian process regression (GPR) with optimised hyperparameters, exhibiting the best performance in validation, training, and testing datasets with R2 values of 0.95, 0.99, and 0.98, respectively. A user-friendly standalone application was developed, providing real-time predictions of the PSS using the two best-developed ML models, GPR and support vector machine (SVM), as well as six empirical models from the literature. This tool offers users flexibility in choosing the most appropriate model for their specific needs, delivering reliable, and accurate results for estimating the PSS of RC slabs. [ABSTRACT FROM AUTHOR]

The primary goal of this research is to see how effective cloud-based computing services such as Google Earth Engine (GEE) platform are at classifying multitemporal satellite images and producing high-quality land cover maps for the target year of 2020, with the possibility of using it on a larger-scale area such as metropolitan Melbourne as a test site. To create high-quality land cover maps, the GEE is utilized to analyze a total of 80 Landsat-8 images. The support vector machine (SVM) approach is used to classify the images. Moreover, we use spectral bands, spectral indices, and topographic parameters to improve classification and address the limitations of existing approaches for classification with restricted input variables. Furthermore, we apply a postprocessing strategy to increase the model's performance by removing the salt-and-pepper noise created by misclassified pixels in supervised classification results. The results demonstrate that given all parameters, the SVM approach achieves an overall accuracy (OA) and kappa accuracy of 88.47% and 85.34%, respectively. Following the implementation of the postprocessing technique, the OA and kappa improve to 92.90% and 90.99%, respectively. The results indicate that Landsat-8 multitemporal data, spectral indices, topographic components, and postprocessing techniques are all important in land cover mapping. Therefore, the use of freely accessible GEE technology and multitemporal Landsat-8 data ensures that decision makers have the resources they need to track land cover throughout the year. [ABSTRACT FROM AUTHOR]

The process of identifying a person using their facial traits is referred to as face recognition, and it is a form of biometric identification. The use of facial recognition might range from that of an entertainment tool to one of a security tool. Even while other forms of biometric identification, such as fingerprints and iris scans, are reliable, they require the active participation of an individual. As a result, criminals cannot rely on them as the most reliable means of verification. When a criminal database, which stores the individual details of a criminal, and facial recognition technology are brought together, it can identify a criminal who is depicted in an image or seen in a video feed. Not only does a criminal recognition system needs to have a high level of accuracy, but it also needs to be able to adapt to significant changes in lighting, occlusion, aging, expressions, and other factors. In this study, they were analyzed and compared with the many methods of face detection and face recognition, such as HAAR cascades, local binary patterns histogram, support vector machines, convolutional neural networks, and ResNet-34. These methods include a variety of different approaches to recognizing faces. An analysis of these strategies is also conducted and then put into practice to those that seem to be the most effective for the designed criminal recognition system. In addition to that, a variety of uses of this criminal recognition in the real world are also discussed. [ABSTRACT FROM AUTHOR]

This paper considers the current market pace, which requires a corresponding competitive advantage. This study forecasted the cost of heavy machinery depending on geolocation and essential characteristics by the field of activity. This study analyzes specific categories of heavy machinery for important price characteristics. The study classified them by keywords in the text description as essential characteristics. Accordingly, a dataset was formed based on the data obtained. The research objective is to collect and structure data from web resources for the sale of heavy equipment. This paper describes in detail the preliminary data processing. The main stages of preprocessing are presented in detail: detection and processing of missing data, removing anomalous data, coding of categorical data, and scaling. The method of the average value of a specific grouped set was applied to fill in the gaps according to the characteristics and available data. The mode value from the grouped items was used to fill in the gaps. The interquartile range and standard deviation were used to detect anomalies. We used the Kolmogorov–Smirnov, KS_Test, and Lilliefors tests to check the data for normality. In this study, the assessment of abnormal data was applied separately to each set of grouped data with the same parameters. The study built and analyzed models using machine learning methods (linear and polynomial regression, decision trees, random forest, support vector machine, and neural network). Two data encoding methods were used to achieve maximum model accuracy: Label Encoder and One Hot Encoder. The work of each algorithm is considered on the example of the created dataset. In this study, the parameter used for coding was the geolocation of heavy equipment. The study pays additional attention to the specific characteristics of heavy machinery by the sector of the economy. The existing methods and tools for price forecasting, depending on the specific characteristics of the equipment, were analyzed. The practical significance of this work lies in developing an algorithm for predicting the cost of heavy machinery by assessing several parameters. [ABSTRACT FROM AUTHOR]

The use of short message service (SMS) and e-mail have increased too much over the last decades. 80% of people do not read e-mails while 98% of cell phone users daily read their SMS. However, these communication media are unsafe and can produce malicious attacks called spam. The e-mails that pretend to be from a trusted company to provide "financial or personal information" are phishing e-mails. These e-mails contain some links; users might download malicious software on their computers when they click on them. Most techniques and models are developed to automatically detect these "SMS and e-mails" but none of them achieved 100% accuracy. In previous studies using machine learning (ML), spam detection using a small dataset has resulted in lower accuracy. To counter this problem, in this paper, multiple classifiers of ML and a classifier of deep learning (DL) were applied to the SMS and e-mail dataset for spam detection with higher accuracy. After conducting experiments on the real dataset, the researchers concluded that the proposed system performed better and more accurately than previously existing models. Specifically, the support vector machine (SVM) classifier outperformed all others. These results suggest that SVM is the optimal choice for classification purposes. [ABSTRACT FROM AUTHOR]

Sleep apnea is one of the most common sleep disorders in the world. It is a common problem for patients to suffer from sleep disturbances. In this paper, we propose a deep convolutional neural network (CNN) model based on the oxygen saturation (SpO2) signal from a smart sensor. This is the reason why we called ZleepNet a network for sleep apnea detection. The proposed model includes three convolutional layers, which include ReLu activation function, 2 dense layers, and one dropout layer for predicting sleep apnea. In this proposed model, the use of signals for detecting the sleep apnea can be reduced from 25 sensors to 1 sensor. We conducted experiments to evaluate the performance of the proposed CNN using real patient data and compared them with traditional machine learning methods such as least discriminant analysis (LDA) and support vector machine (SVM), baggy representation tree, and artificial neural network (ANN) on publicly available sleep datasets using the same parameter setting. The results show that the proposed model outperformed the other methods with the accuracy of 91.30% with the split rate of 0.2% in which the training data are 20% and testing data are 80%. The accuracy of the proposed CNN is 90.33% when compared with the LDA which achieved 86.5% accuracy with the split rate of 0.5% in which training data are 50% and testing data are 50%. It achieved 91.56% accuracy when compared with the support vector machine (SVM) in which training data are 70% and testing data are 30%. The achieved accuracy of the proposed CNN is 91.89% when compared with bagging representation tree in which training data are 90% and testing data are 10%. The accuracy of the proposed CNN is 91.30% in which training data are 83% and testing data are 17% when compared with artificial neural networks (ANN). [ABSTRACT FROM AUTHOR]

Around the world, road traffic accidents are the leading cause of serious injuries and deaths. Ethiopia is one of the countries that suffer the most from traffic accidents. Every government in every country wants to keep its citizens safe from accidents. To keep people safe from accidents, it is necessary to conduct a detailed analysis of the factors that contribute to high-severity accidents and deaths. As a result, we developed a data mining algorithm-based road traffic accident severity analysis for the Addis Ababa subcity in this study. The longest frequent factors in the dataset were generated using the Apriori algorithm. The Apriori algorithm generates the most frequent factors as sex: male, driver–vehicle relationship: employee, weather condition: normal, pedestrian movement: not a pedestrian, road surface type: asphalt, and accident severity: high severity, with 42.21% and 84.35% support and confidence, respectively. In addition, we created an accident severity level predictive model using a support vector machine. The predictive model has an accuracy of 85%. The proposed predictive model outperforms other well-known predictive models, such as K-nearest neighbors, decision trees, and random forests. As a result, when making decisions or policies in Ethiopia, the government or private organizations should consider the association of factors that lead to serious severe accidents. [ABSTRACT FROM AUTHOR]

Slope stability estimation is an engineering problem that involves several parameters. The problems of low accuracy of the model and blind data preprocessing are commonly existent in slope stability prediction research. To address these problems, 10 quantitative indicators are selected from 135 field cases to improve the accuracy of the model. These indicators were analyzed and visualized to examine their reliabilities after preprocessing. Combined with random forest (RF), particle swarm optimization (PSO), and least squares support vector machine (LSSVM) algorithms, a hybrid prediction model that the RF–PSO–LSSVM model is proposed for identifying slope stability, and its reliability is verified by other prediction models that SVM, logistic regression, decision trees, k-nearest neighbor, naive Bayes, and linear discriminant analysis. Besides, the importance score of each indicator in the prediction of slope stability is discussed by employing the RF algorithm. The research results show that the proposed hybrid model exhibits the best accuracy and superiority in slope stability prediction than other models in this paper, which its values of the best fitness, area under the curve, T-measure, and accuracy are 98.15%, 96.4%, 96.55%, and 95.82%, respectively. The most influential factors affecting slope stability are precipitation and gravity, and the slope type and pore water ratio are identified as the least significant factors in this paper. The results provide a novel approach toward slope stability prediction in the field of geotechnical engineering. [ABSTRACT FROM AUTHOR]

A fast and efficient diagnosis of serious infectious diseases, such as the recent SARS-CoV-2, is necessary in order to curb both the spread of existing variants and the emergence of new ones. In this regard and recognizing the shortcomings of the reverse transcription-polymerase chain reaction (RT-PCR) and rapid diagnostic test (RDT), strategic planning in the public health system is required. In particular, helping researchers develop a more accurate diagnosis means to distinguish patients with symptoms with COVID-19 from other common infections is what is needed. The aim of this study was to train and optimize the support vector machine (SVM) and K-nearest neighbors (KNN) classifiers to rapidly identify SARS-CoV-2 (positive/negative) patients through a simple complete blood test without any prior knowledge of the patient's health state or symptoms. After applying both models to a sample of patients at Israelita Albert Einstein at São Paulo, Brazil (solely for two examined groups of patients' data: "regular ward" and "not admitted to the hospital"), it was found that both provided early and accurate detection, based only on a selected blood profile via the statistical test of dependence (ANOVA test). The best performance was achieved by the improved SVM technique on nonhospitalized patients, with precision, recall, accuracy, and AUC values reaching 94%, 96%, 95%, and 99%, respectively, which supports the potential of this innovative strategy to significantly improve initial screening. [ABSTRACT FROM AUTHOR]

Introduction. Coronary artery disease (CAD) is one of the main causes of death all over the world. One way to reduce the mortality rate from CAD is to predict its risk and take effective interventions. The use of machine learning- (ML-) based methods is an effective method for predicting CAD-induced death, which is why many studies in this field have been conducted in recent years. Thus, this study aimed to review published studies on artificial intelligence classification algorithms in CAD detection and diagnosis. Methods. This study systematically reviewed the most cutting-edge techniques for analyzing clinical and paraclinical data to quickly diagnose CAD. We searched PubMed, Scopus, and Web of Science databases using a combination of related keywords. A data extraction form was used to collect data after selecting the articles based on inclusion and exclusion criteria. The content analysis method was used to analyze the data, and based on the study's objectives, the results are presented in tables and figures. Results. Our search in three prevalent databases resulted in 15689 studies, of which 54 were included to be reviewed for data analysis. Most studies used laboratory and demographic data classification and have shown desirable results. In general, three ML methods (traditional ML, DL/NN, and ensemble) were used. Among the algorithms used, random forest (RF), linear regression (LR), neural networks (NNs), support vector machine (SVM), and K-nearest networks (KNNs) have the most applications in the field of code recognition. Conclusion. The findings of this study show that these models based on different ML methods were successful despite the lack of a benchmark for comparing and analyzing ML features, methods, and algorithms in CAD diagnosis. Many of these models performed better in their analyses of CAD features as a result of a closer look. In the near future, clinical specialists can use ML-based models as a powerful tool for diagnosing CAD more quickly and precisely by looking at its design's technical facets. Among its incredible outcomes are decreased diagnostic errors, diagnostic time, and needless invasive diagnostic tests, all of which typically result in decreases in diagnostic expenses for healthcare systems. [ABSTRACT FROM AUTHOR]

The development of medical diagnostic models to support healthcare professionals has witnessed remarkable growth in recent years. Among the prevalent health conditions affecting the global population, diabetes stands out as a significant concern. In the domain of diabetes diagnosis, machine learning algorithms have been widely explored for generating disease detection models, leveraging diverse datasets primarily derived from clinical studies. The performance of these models heavily relies on the selection of the classifier algorithm and the quality of the dataset. Therefore, optimizing the input data by selecting relevant features becomes essential for accurate classification. This research presents a comprehensive investigation into diabetes detection models by integrating two feature selection techniques: the Akaike information criterion and genetic algorithms. These techniques are combined with six prominent classifier algorithms, including support vector machine, random forest, k-nearest neighbor, gradient boosting, extra trees, and naive Bayes. By leveraging clinical and paraclinical features, the generated models are evaluated and compared to existing approaches. The results demonstrate superior performance, surpassing accuracies of 94%. Furthermore, the use of feature selection techniques allows for working with a reduced dataset. The significance of feature selection is underscored in this study, showcasing its pivotal role in enhancing the performance of diabetes detection models. By judiciously selecting relevant features, this approach contributes to the advancement of medical diagnostic capabilities and empowers healthcare professionals in making informed decisions regarding diabetes diagnosis and treatment. [ABSTRACT FROM AUTHOR]

Parkinson's disease (PD) is one of the significant common neurological disorders of the current age that causes uncontrollable movements like shaking, stiffness, and difficulty. The early clinical diagnosis of this disease is essential for preventing the progression of PD. Hence, an innovative method is proposed here based on combining the crow search algorithm and decision tree (CSADT) for the early PD diagnosis. This approach is used on four crucial Parkinson's datasets, including meander, spiral, voice, and speech-Sakar. Using the presented method, PD is effectively diagnosed by evaluating each dataset's critical features and extracting the primary practical outcomes. The used algorithm was compared with other machine learning algorithms of k-nearest neighbor (KNN), support vector machine (SVM), naive Baye (NB), multilayer perceptron (MLP), decision tree (DT), random tree, logistic regression, support vector machine of radial base functions (SVM of RBFs), and combined classifier in terms of accuracy, recall, and combination measure F1. The analytical results emphasize the used algorithm's superiority over the other selected ones. The proposed model yields nearly 100% accuracy through various trials on the datasets. Notably, a high detection speed achieved the lowest detection time of 2.6 seconds. The main novelty of this paper is attributed to the accuracy of the presented PD diagnosis method, which is much higher than its counterparts. [ABSTRACT FROM AUTHOR]

Credit card fraud is a common occurrence in today's society because the majority of us use credit cards as a form of payment more frequently. This is the outcome of developments in technology and an increase in online transactions, which have given rise to frauds that have caused significant financial losses. In order to detect fraud in credit card transactions, efficient and effective approaches are needed. In this study, we developed a hybrid CNN-SVM model for detecting fraud in credit card transactions. The effectiveness of our suggested hybrid CNN-SVM model for detecting fraud in credit card transactions was tested using real-world public credit card transaction data. The architecture of our hybrid CNN-SVM model was developed by replacing the final output layer of the CNN model with an SVM classifier. The first classifier is a fully connected layer with softmax that is trained using an end-to-end approach, whereas the second classifier is a support vector machine that is piled on top by deleting the final fully connected and softmax layer. According to experimental results, our hybrid CNN-SVM model produced classification performances with accuracy, precision, recall, F1-score, and AUC of 91.08%, 90.50%, 90.34%, 90.41, and 91.05%, respectively. [ABSTRACT FROM AUTHOR]

This work pursues two primary aims: identifying the precursory point by the CSD analysis of AE series and using acoustic emission parameters to predict the compressive strength of concrete utilizing the artificial neural network (ANN), extreme learning machine (ELM), and support vector machine (SVM). The concrete specimens with a water-cement ratio of 0.45 and 0.55 were tested for compressive strength, and the failure process of concrete was monitored by acoustic emission. The results demonstrate that the advantage of variance was being intuitive, robust, and less affected by the window. The fluctuation and abrupt increase of the variance can be regarded as the critical point and the formation of the main failure surface, which provided warning information for preventing catastrophic failures. The precursory point determined by the variance was 80%–90% of the ultimate strength, consistent with the improved b value (Ib). Then, an approach to predict the compressive strength of concrete was proposed to predict the compressive strength of concrete utilizing the ANN, ELM, and SVM. The results of the ELM were more outstanding than those of the ANN and SVM. The results suggest that it was possible to predict the compressive strength of concrete with a small number of samples using the AE parameters. [ABSTRACT FROM AUTHOR]

The use of alternative materials and recycling in construction has gained popularity in recent years as part of the industry's commitment to sustainability. One such material, recycled aggregates, has been extensively studied over the past two decades for its potential to replace natural aggregates in cement-based composites. However, the unique properties of recycled aggregates make traditional concrete mix design methods ineffective in determining their target compressive strength. To address this challenge, four machine learning models based on ensemble learning algorithms, including CatBoost regressor (CatBoost), light gradient-boosting machine regressor (LGBM), random forest regressor (RFR), and extreme gradient-boosting regressor (XGBoost), were employed to predict the compressive strength of recycled aggregate concrete. Results demonstrate that the proposed models are highly accurate and generalizable, with high coefficients of determination and low error predictions. The CatBoost model performed the best, exhibiting an R2 of 0.938 and low mean absolute error and root mean squared error values of 2.639 and 3.885, respectively, in the blind evaluation process. Although the random forest regression algorithm performed the least well among the four models, it still outperformed conventional machine learning algorithms such as support vector machines and artificial neural networks. The findings in this study suggested that the CatBoost model is the optimal choice for predicting concrete's compressive strength due to its high accuracy and low prediction error. [ABSTRACT FROM AUTHOR]

Material perception is one of the several essential abilities required by robots, and it also poses significant challenges in real-world field applications. In harsh environments, the existing material recognition methods have the problem of low accuracy. In this paper, ultrasonic technology is applied to the field of material recognition, which is derived from the predatory strategy of echolocation animals. We propose a novel noncontact material recognition method of surrounding objects for robots based on ultrasonic echo signals, which can be used in external extreme environments. This method primarily adopts the 16-dimensional feature vector extracted from intrinsic mode functions that we gain from empirical mode decomposition as inputs of machine learning algorithms to recognize different materials, and we use K-nearest neighbor, decision tree, and support vector machine algorithms on the feature vector set to decide the best classifier, and its acoustic theoretical model is established additionally. The experimental results validate the accuracy of the acoustic theoretical model and the effectiveness of the proposed method. Compared with the existing methods, the proposed method improves the low accuracy and the poor recognition effect in ultrasonic material recognition. This method provides a new idea for robots to recognize and perceive materials in extreme environments. [ABSTRACT FROM AUTHOR]

Humans are familiar with "diabetes," a chronic metabolic disease that causes resistance to insulin in the human body, and about 425 million cases worldwide. Diabetes is a hazard to human health since it can gradually cause significant damage to the heart, blood vessels, eyes, kidneys, and nerves. As a result, it is critical to recognize diabetes early on to minimize its negative consequences. Over the years, artificial intelligence (AI) technology and data mining methods are playing a crucial role in detecting diabetic patients. Considering this opportunity, we present a fine-tuned random forest algorithm with the best parameters (RFWBP) that is used with the RF algorithm and feature engineering to detect diabetes patients at an early stage. We have employed several data processing techniques (e.g., normalization, conversion into numerical data) to raw data during the prepossessing phase. After that, we further applied some data mining techniques, adding related characteristics to the primary dataset. Finally, we train the proposed RFWBP and conventional methods like the AdaBoost algorithm, support vector machine, logistic regression, naive Bayes, multilayer perceptron, and a regular random forest with the dataset. Furthermore, we also utilized 5-fold cross-validation to enhance the performance of the RFWBP classifier. The proposed RFWBP achieved an accuracy of 95.83% and 90.68% with and without 5-fold cross-validation, respectively. Moreover, the proposed RFWBP is compared with conventional machine learning methods to evaluate the performance. The experimental results confirm that the proposed RFWBP outperformed conventional machine learning methods. [ABSTRACT FROM AUTHOR]

Almost 17.9 million people are losing their lives due to cardiovascular disease, which is 32% of total death throughout the world. It is a global concern nowadays. However, it is a matter of joy that the mortality rate due to heart disease can be reduced by early treatment, for which early-stage detection is a crucial issue. This study is aimed at building a potential machine learning model to predict heart disease in early stage employing several feature selection techniques to identify significant features. Three different approaches were applied for feature selection such as chi-square, ANOVA, and mutual information, and the selected feature subsets were denoted as SF1, SF2, and SF3, respectively. Then, six different machine learning models such as logistic regression (C1), support vector machine (C2), K-nearest neighbor (C3), random forest (C4), Naive Bayes (C5), and decision tree (C6) were applied to find the most optimistic model along with the best-fit feature subset. Finally, we found that random forest provided the most optimistic performance for SF3 feature subsets with 94.51% accuracy, 94.87% sensitivity, 94.23% specificity, 94.95 area under ROC curve (AURC), and 0.31 log loss. The performance of the applied model along with selected features indicates that the proposed model is highly potential for clinical use to predict heart disease in the early stages with low cost and less time. [ABSTRACT FROM AUTHOR]

Facial emotion expressions are among the most potent, natural, and powerful means of human communication. Due to the COVID-19 pandemic, educational institutions worldwide are forced to switch rapidly to remote and online learning. Students are currently in an emergency state and must adapt to various and readily accessible learning methods, such as mobile learning applications or an e-learning system. A systematic literature review (SLR) is conducted to extract and synthesize information such as the emotion classifier used in the facial expression recognition (FER) system, the dataset used, the preprocessing technique applied, the feature extraction approach used, and the strength and limitation of the previous studies. Based on the search criteria, 701 publications were initially retrieved from five different digital databases, of which 48 studies have been chosen as primary studies for further analysis. Based on the findings of this study, the deep learning approach is the most frequently adopted approach in classifying student emotions during online learning. FER-2013 is the most commonly used FER dataset in FER studies, while DAiSEE is the most used academic emotion dataset. Moreover, support vector machine (SVM) is the conventional learning emotion classifier that is widely used in the FER systems, while convolutional neural network (CNN) is the most frequently used deep learning classifier. Next, it was found that the number of real-time FER systems is less than that of non-real-time FER systems. Finally, the top-1 accuracy of 94.6% was achieved by the long-term recurrent convolutional network on the academic emotion dataset, and the limitation is that it has low illumination and a lack of frontal pose. [ABSTRACT FROM AUTHOR]