Search

Summary: As lithium‐ion batteries (LIBs) are used in autonomous underwater vehicles (AUVs) power systems, their thermal safety and reliability have seriously inhibited the development of AUVs toward high speed and long voyage. However, the related research on AUVs' battery thermal management is very limited. In this article, a novel and efficient liquid cooling scheme is proposed, for battery thermal management of AUV, which adopts bionic wave cooling channels. A three‐dimensional heat dissipation model of the battery was developed, which considered the influence of battery internal resistance and state of charge on battery heat generation. The effects of discharge rate, channel shape, coolant mass flow rate, coolant inlet direction, and dynamic operation strategy on the battery maximum temperature and temperature variation were investigated during discharging process. It was found that the battery with bionic wave channels was superior to the battery with straight channels, regarding cooling efficiency. The maximum temperature and temperature difference of the former decreased by 12.8 and 5.3 K compared with the latter at 5C current discharging rate. Based on the bionic wave channels, increasing the mass flow rate of coolant was the most efficient route to reducing the maximum temperature and improving the uniformity of the battery temperature. A mass flow rate equal to 2.5 × 10−4 kg s−1 is reasonably recommended by considering the cooling efficiency comprehensively. The direction of the coolant inlet had little effect on the maximum temperature of the battery, but it significantly improved the uniformity of the battery temperature. Under the premise of meeting the cruising requirements of AUVs, alternating low‐rate and high‐rate discharge was more conducive to improving the temperature behavior of the battery. The conclusions of this article can provide reference for the battery thermal management system of AUVs. [ABSTRACT FROM AUTHOR]

Summary: Thermal management of large‐scale Li‐ion battery packs is of great significance to their safety and life cycle, which would impact their applicability in electric vehicles. Of the many strategies developed for this purpose, indirect liquid cooling has already demonstrated quite high potentials in thermal regulation of such battery systems. In this study, a compact lightweight serpentine wavy channel configuration was chosen to construct an indirect liquid cooling system for a battery module of cylindrical Li‐ion cells. The serpentine channel has a number of six internal minichannels. Experimental test data were used to conduct a comprehensive thermal analysis to examine the highest temperature, the maximum temperature difference, and the heat accumulation percentages, and so forth within the battery pack. Results have revealed the ability of the cooling system to maintain the module temperature within appropriate working conditions for electric vehicle applications for most cycling tests including two driving cycles. Furthermore, the analysis insights raised by this study could be useful in understanding the cooling performance of the liquid‐based thermal management systems for electric vehicles. [ABSTRACT FROM AUTHOR]