Search

Abstract In this study the nonlocal bond-based peridynamic (PD) theory was applied to simulate Lamb wave transmission in 2D bimaterial plates. Plates of unlike materials were jointed end-to-end to make a bimaterial plate. The surface of the plate was then excited tangentially by single-frequency and multi-frequency force signals. The influence of changing material properties on travelling of the symmetric and antisymmetric Lamb waves were studied in detail. The phase and group velocities of travelling wave in bimaterial plates were calculated and it was found that dissimilar material properties of two joint plates can significantly alter the amplitude and arrival time of the wave. Moreover, Fast Fourier Transform (FFT) of the time history of symmetric Lamb wave velocity was calculated and verified. Accuracy and consistency of PD wave model was confirmed entirely using Spectral Finite Element Method (SFEM). The comparison between the results of two applied methods shows a good agreement. [ABSTRACT FROM AUTHOR]

Abstract Scanning laser Doppler vibrometry (SLDV) is a promising method for visualizing defects in plate-like structures. The Lamb wave-based SLDV method using continuous excitations has been recently developed in nondestructive evaluation (NDE). In addition, various signal processing techniques have been developed to enhance damage detection capability for the method. To visualize defects, the A 0 mode is commonly used because of its sensitivity to the thickness variations, i.e. the wave speed changes according to the thickness of a plate. The A 0 mode is easily generated by lead zirconate titanate (PZT) transducers. However, for thick plates, the A 0 mode is found to be less sensitive to thickness variations compared to thin structures. To address this issue, a mode-tuned inter-digital transducer (IDT) is adopted to efficiently generate and utilize the symmetric modes for damage detection and visualization of thick plates. Based on the wavelength of the S 0 mode using the dispersion curve of the plate, the IDT is designed and fabricated for efficient symmetric mode generation. To evaluate the capability of the mode-tuned IDT-based SLDV, a 6-mm-thick plate (40 mm × 40 mm) with defects of 0.3 mm, 0.6 mm, 0.9 mm, and 1.2 mm depths is used. The S 0 mode is selected for its wavenumber sensitivity and the degree of separation between modes. It is demonstrated that the detectability of shallow defects in a thick plate is improved compared to that when using the A 0 mode. [ABSTRACT FROM AUTHOR]

The transmission behavior of Lamb waves and the possible occurrence of resonance at an adhesive butt joint of plates are studied experimentally. To this purpose, two 2.5-mm thick aluminum alloy plates are bonded at their edges using cyanoacrylate-based adhesive. Bonded plate specimens with different joint conditions are prepared by changing the bonding procedure. The measurements are performed for the transmission characteristics of the lowest-order symmetric (S0) and antisymmetric (A0) Lamb modes for the frequency range of 0.4–0.6 MHz below the cut-off frequency of the higher-order modes. The experimental results show that the transmission coefficients of the S0 and A0 modes exhibit different frequency-dependent characteristics depending on the joint condition. Furthermore, for the incidence of the S0 mode at the center frequency of 1 MHz, the transmitted S0 mode in weakly bonded specimens shows a long oscillation tail due to the resonance effect. The experimental results are discussed in the light of the theoretical results based on the spring-type interface model. The interfacial stiffnesses identified from the transmission coefficients are shown to be correlated with the bonding condition of the joint and give reasonable estimates of the resonance frequencies of weakly bonded specimens. [ABSTRACT FROM AUTHOR]

Effective application of the Lamb waves for structural health monitoring and damage identification intensively relies on the accurate damage-related feature extraction in the received signals. Most of existing signal processing methods extract the damage-related features from the time–frequency joint spectrum which requires a quite amount of effort. In this paper, the soft-thresholding process, based on different signal decomposition methods, is introduced to damage identification so that the damage-related signal features can be manifested more distinctively. By applying two popular signal decomposition methods (i.e., the discrete wavelet transform (DWT) and the empirical mode decomposition (EMD)), the signal of interest can be represented by a series of components with different frequencies. Since most noises exist in the high frequency range, it is feasible to alleviate noise by restricting the energy of high-frequency components. Finally, a denoised signal is synthesized using the corresponding reconstruction method. As an application, the soft-thresholding process is performed to detect a small crack on an isotropic aluminum plate under the white Gaussian noise contamination. The results, from both the numerical finite element simulation and experimental test, indicate that the soft-thresholding process is capable of effectively reducing the effect of noise, convincingly improving the sensitivity of damage identification, and discriminating relatively small damage. [ABSTRACT FROM AUTHOR]

Structures with composite materials in daily use are subjected to impact. Determining if the material is damaged is an important aspect of structural health monitoring of composites. In this paper, a method to determine structural damage as a result of impact and localize the position of the damage based on lamb wave mode is presented. First, the paper analyses the characteristics of lamb wave mode generated by force loading on the plate. These results are validated based on the analysis of experimental results. From the results, it can be concluded that S 0 mode lamb waves were generated by damage of the plate structure and it can be used as the characteristic signal of damage. Then, empirical mode decomposition (EMD) is utilized to decompose to the Intrinsic Mode Functions (IMF) of S 0 mode inside the emission signals of complex acoustics to realize if damage occurs and localize the position of impact damage on the composite material plate. [ABSTRACT FROM AUTHOR]

Abstract: Numerical simulations were carried out to quantify the reflection and transmission characteristics of the fundamental Lamb modes propagating in aluminium sub-plates, which are formed due to a semi-infinite horizontal crack. It was observed that, a Lamb mode propagating in a sub-plate when incident at the edge of a crack, undergoes reflection and transmits through the main plate, as well as the other sub-plate. The mode transmitted through the sub-plate has been termed the ‘Turning Lamb Mode’ (TLM). Furthermore, a mode converted mode also propagates along with the TLM. This mode has been termed the ‘Mode Converted Turning Lamb Mode’ (MCTLM). Reflection and transmission characteristics of the fundamental Lamb modes in aluminium sub-plates were studied at frequencies 150kHz, 175kHz, and 200kHz. Experiments conducted to validate the observations made in numerical simulations, confirmed that the transmission and reflection characteristics depend on the thickness ratio. From this study it is surmised that when a Lamb mode propagates through a plate containing horizontal crack, the TLM and the MCTLM start propagating from one sub-plate to the other at the rear edge of the crack and amplitude of these modes depends on the location of the crack across the plate thickness. [Copyright &y& Elsevier]

Abstract: A new type of hydrogen sensor using Lamb waves is proposed and fabricated. The sensor consists of an aluminum thin plate-based hydrogen sensing medium that can be easily replaced, a medium grip component, and a piezoelectric sensor. In addition to structural uniqueness, the proposed hydrogen sensor provides two wave parameters, peak amplitude and phase shift, to detect changes in hydrogen concentration. The proposed sensor can provide reliable sensitivity, decreased fabrication and operational costs, and significantly increased lifetime because its hydrogen sensing medium can be replaced when it shows low sensitivity. [Copyright &y& Elsevier]

Abstract: Using finite element method, we have made a theoretically study of the band structure of Lamb wave in a locally resonant phononic crystal strip waveguide with periodic soft rubber attached on the two sides of epoxy main plate. The numerical results show that the Lamb wave band gap based on local resonant mechanism can be opened up in the stub strip waveguides, and the width of the local resonant band gap is narrower than that based on the Bragg scattering mechanism. The results also show that the stub shape and width have influence on the frequency and width of the Lamb wave band gap. [Copyright &y& Elsevier]

Abstract: The thermal degradation in ferritic Cr–Ni alloy steel plates is measured using the nonlinear effect of Lamb wave propagation. Experiments were carried out to introduce controlled levels of thermal damage to determine the nonlinear response of Lamb waves. A “mountain-shape” change in the normalized acoustic nonlinearity of Lamb wave versus the level of thermal degradation in the specimens has been observed. The variation in the measured acoustic nonlinearity reveals, based on metallographic studies, that the normalized acoustic nonlinearity increases due to the second phase precipitates in the early stage and it decreases as a combined result of dislocation change and micro-void initiation in the material. The results show a potential application of the nonlinear Lamb waves for the quantitative assessment of thermal damage in metallic plates or pipes. [Copyright &y& Elsevier]

Abstract: In this paper we propose a concept and report experimental results based on a circular array of Piezoelectric Wafer Active Sensors (PWASs) for rapid localization and parametric identification of corrosion type damage in metallic plates. Implementation of this circular array of PWASs combines the use of ultrasonic Lamb wave propagation technique and an algorithm based on symmetry breaking in the signal pattern to locate and monitor the growth of a corrosion pit on a metallic plate. Wavelet time-frequency maps of the sensor signals are employed to obtain an insight regarding the effect of corrosion growth on the Lamb wave transmission in time-frequency scale. We present here a method to eliminate the time scale, which helps in identifying easily the signature of damage in the measured signals. The proposed method becomes useful in determining the approximate location of the damage with respect to the location of three neighboring sensors in the circular array. A cumulative damage index is computed from the wavelet coefficients for varying damage sizes and the results appear promising. Damage index is plotted against the damage parameters for frequency sweep of the excitation signal (a windowed sine signal). Results of corrosion damage are compared with circular holes of various sizes to demonstrate the applicability of present method to different types of damage. [Copyright &y& Elsevier]

Abstract: An analysis is given to the band structure of the two-dimensional phononic crystal plate constituted of a square array of elastic anisotropic, circular Pb cylinders embedded in elastic isotropic epoxy. The numerical results show that the band gap can be tuned by rotating the anisotropic material orientation. It is found that the influence of anisotropy on band gap of Lamb wave is clearly different from that on the band gap of bulk waves. The thickness of the system under study is a sensitive parameter to affect the influence of anisotropic materials on the normalized gap width. [Copyright &y& Elsevier]

Abstract: Propagation of the anti-symmetric fundamental Lamb mode (A 0) in a composite laminate containing a semi-infinite delamination was studied through numerical simulations and experimental studies. Here, the wave was generated on a sub-laminate above the delaminated region, and the reflection and transmission of the Lamb modes at the edge of the discontinuity were quantitatively studied. The wave group (named as ‘turning mode’), which was made to propagate from one side of the delamination to the other side (through delaminations) was captured and its transmission factor was estimated. Reflection and transmission factors of wave groups were estimated for three different laminates – quasi-isotropic, unidirectional and cross-ply, containing delamination at various interfaces across thickness. Propagation of ‘turning modes’ were also captured experimentally, employing air-coupled transducers, in quasi-isotropic laminates containing delaminations at different interfaces. Attenuation compensation was incorporated in the experimental signals to improve the comparison of transmission and reflection factors between numerical simulations and experiments. [Copyright &y& Elsevier]

Abstract: This paper proposes an acoustic multi-touch tactile sensing method. The proposed method is based on an amplitude disturbed ultrasonic wave diffraction pattern. An A 0 Lamb wave transmitted in a thin finite copper plate is processed to provide tactile information, for one or two fingers. A touch event is localized by identifying the diffraction signals among a database of diffracted Lamb wave references. Statistic models are used to improve the localization reliability. An artificial silicone finger is used in the calibration procedure. This touch interface is evaluated as a 2-touch interface. [ABSTRACT FROM AUTHOR]