Search

• The proposed auxetic honeycomb possesses more excellent auxetic behavior and specific energy absorption than the conventional honeycomb. • The interaction between the structural parameters is analyzed. • The multi-objective optimization of the enhanced auxetic honeycomb (EAH) was investigated. • The theoretical model and Box-Behnken Design model were used to predict the mechanical properties of EAH. In response to the challenge of low stiffness and energy absorption capacity, various designs of negative Poisson's ratio (NPR) structures have emerged. However, these designs often lack a comprehensive analysis of other mechanical properties, leading to subpar mechanical performance. Previous studies have explored the mechanical properties response of enhanced re-entrant honeycombs (ERH) under impact conditions, revealing limitations in optimizing the structure's performance with a single objective. Therefore, this study aims to enhance ERH structural parameters to achieve superior mechanical performance through theoretical derivations and geometric optimizations. The results demonstrate that the proposed theoretical model is consistent with finite element analysis and response surface (RS) predictions. Expressions for Young's modulus, specific energy absorption, and compressive strength are proposed, facilitating the identification of structural parameters that meet specific requirements during reverse design. Furthermore, a multi-objective optimization approach optimizes the geometric parameters based on maximum energy absorption and compressive strength. The mechanical behavior of the optimized ERH is investigated using the finite element method, revealing the energy absorption capacity of 13.78 J/g while maintaining Poisson's ratio at -1.06. Additionally, the deformation mode of the optimized structure showcases enhanced stability compared to traditional honeycomb structures. The theoretical model and RS method were used to guide the design of ERH and promote the application of NPR structures. [ABSTRACT FROM AUTHOR]

Recently, auxetic metamaterials have turned into an area of growing interest, because of their deformation uniqueness, design flexibility, and functional diversity. To achieve their programmable design of densification and energy absorption, the variable stiffness factor method (VSF) emerged. However, the energy absorption capacity of the metamaterials designed by this method has a significant reduction. In this work, to remedy this defect, several different lightweight specimens are proposed and fabricated to extend the stage of energy absorption and retain the tunability. Then quasi-static compression tests and finite element methods are carried out to analyze the mechanical properties of the designed boundary-constrained structure (BCS) and X-shape constrained structure (XCS). The accuracy of the densification points and energy absorption capacity of the two structures at different VSF values are also studied. The results show that the densification points of the designed structures can be adjusted quantitatively, and their deformation modes are more stable than conventional structures during compression. Furthermore, their specific energy absorption is four and five times higher than that of non-lightweight structures with VSF = 40%, respectively. These findings contribute to advancing the implementation of auxetics in applications of multistage protective structures. • A lightweight metamaterial based on the variable stiffness factor (VSF) method is proposed. • The proposed structures realize multi-level energy absorption and stable deformation. • The SEA of proposed structures was 4 and 5 times higher than that of VSF = 40% structure. [ABSTRACT FROM AUTHOR]

An analytical framework has been developed for predicting the equivalent in-plane elastic moduli (longitudinal and transverse Young’s modulus, shear modulus, Poisson’s ratios) of irregular auxetic honeycombs with spatially random variations in cell angles. Employing a bottom up multi-scale based approach, computationally efficient closed-form expressions have been derived in this article. This study also includes development of a highly generalized finite element code capable of accepting number of cells in two perpendicular directions, random structural geometry and material properties of irregular auxetic honeycomb and thereby obtaining five in-plane elastic moduli of the structure. The elastic moduli obtained for different degree of randomness following the analytical formulae have been compared with the results of direct finite element simulations and they are found to be in good agreement corroborating the validity and accuracy of the proposed approach. The transverse Young’s modulus, shear modulus and Poisson’s ratio for loading in transverse direction (effecting the auxetic property) have been found to be highly influenced by the structural irregularity in auxetic honeycombs. [ABSTRACT FROM AUTHOR]

Abstract: Systems with a negative Poisson’s ratio (auxetic) exhibit the unusual yet very useful property of getting wider rather than thinner when uniaxially stretched. A novel mechanism to generate auxetic behaviour at tailor-made values which may be implemented in composites manufacture using readily available materials is proposed. FEA simulations are used to provide a proof of principle for this concept and an analytical model is proposed so as to elucidate the requirements for auxetic behaviour. It is shown that the simulations and analytical model give comparable results and confirm that this system may reach giant negative values of the Poisson’s ratio. [Copyright &y& Elsevier]

In recent years, auxetic cellular materials such as auxetic reentrant honeycombs were widely studied due to its attractively negative Poisson's ratio. In this manuscript, the structure response of end-clamped sandwich beam with auxetic reentrant hexagonal aluminum honeycomb core locally subjected to foam projectile with high-velocity impact was experimentally and numerically studied. The reentrant honeycomb cores with different cell-wall thicknesses were fabricated by selective laser melting (SLM). According to experiment results, the failure modes of the sandwich beam were investigated. It was found that sandwich beam with different honeycomb cell's thicknesses could fail in different modes. Meanwhile, the local negative Poisson's ratio deformation was observed in the thin honeycomb core. Based on this, a finite element (FE) model was constructed to analysis the dynamic deformation evolution of two face sheets and auxetic reentrant honeycomb core. The local auxetic and expand deformations of honeycomb core were both found. Finally, the residual deflections of sandwich beam under impulsive loadings were discussed. Unlabelled Image • The structure response of sandwich beam with reentrant honeycomb core under locally impact was firstly studied. • The local negative Poisson's ratio deformation was observed in the reentrant honeycomb core. • The relationship between residual deflection of sandwich beam with reentrant honeycomb core and local impulse was linear. [ABSTRACT FROM AUTHOR]