Search

• CO 2 reforming of CH 4 was performed in DBDs with different dielectric layers. • More intensified filamentary microdischarges were displayed in DBD-SD. • DBD-SD exhibited higher reactant conversion and liquid product selectivity. • Higher gas product selectivity and stable carbon balance were achieved in DBD-DD. • Higher energy efficiency for plasma reforming process was obtained in DBD-SD. CO 2 reforming of CH 4 in a non-thermal plasma process (e.g., dielectric barrier discharge, DBD) possesses dual benefits for our environment and energy needs. However, this process is strongly influenced by the dielectric structure of the DBD. Here, plasma CO 2 reforming of CH 4 has been performed in both single-dielectric and double-dielectric DBD (DBD-SD and DBD-DD) reactors under atmospheric pressure. Electrical and optical characterization, along with temperature measurements are performed to understand the influence of the DBD-SD and DBD-DD designs. Reactor performance for reforming is compared under different discharge powers. The results show that CO 2 /CH 4 discharges in both DBD-SD and DBD-DD display typical filamentary microdischarges. Compared with the DBD-DD, the DBD-SD reactor exhibits a larger number and higher intensity of current pulses, which leads to a higher electron density and formation of reactive species. The highest conversion of CO 2 (24.1 %) and CH 4 (49.2 %) are achieved in the DBD-SD at a high discharge power (75 W). Moreover, higher selectivities of gaseous products are obtained in the DBD-DD, while the DBD-SD reactor shows a higher selectivity for liquid products, mainly including methanol and acetic acid. The highest energy efficiencies for reactant conversion (0.34 mmol/kJ), gaseous and liquid production formation (0.26 mmol/kJ and 0.015 mmol/kJ) are achieved in the DBD-SD reactor at a low discharge power (22 W), resulting from the low energy loss to the environment. However, the carbon deposited on the inner electrode surface in the DBD-SD would have an adverse influence on the reactor's performance. Further research on the optimization of the DBD reactor to establish an efficient plasma-catalysis system is required for industrial applications. [ABSTRACT FROM AUTHOR]

• Cold plasma was used to modify photoanodes of the SnO 2 based DSSCs. • Plasma removes hydrocarbonated and oxocarbonated species from photoanode surfaces. • N 2 plasma converts Sn into higher oxidation states and reduces oxygen vacancies. • Remarkable efficiency increasement of ~410% was achieved. Dye sensitized solar cells (DSSC) are an attractive third-generation photovoltaic technology particularly promising for operation under diffuse and lower light conditions. However, high costs of the precious metals used for sensitizing dyes and low charge generation capability parameters limit the utility of DSSCs in comparison to conventional silicon solar cells. In this study, tin oxide (SnO 2) photoelectrodes are treated with non-thermal atmospheric pressure plasmas to enhance photovoltaic performance. The effects of nitrogen and argon plasma surface treatment of photoanodes on the efficiency enhancement of DSSCs are systematically investigated by fabricating solar cells using pristine SnO 2 and plasma-treated photoanodes. Solar cells made with Eosin Y sensitized pristine SnO 2 photoanode exhibited a short circuit current density (J SC) of 1.03 mA cm−2 and an overall power conversion efficiency (PCE) of 0.30% whereas solar cells made with nitrogen plasma treated photoanode exhibited a J SC of 6.20 mA cm−2 and an overall PCE of 1.53% (4 times enhancement) under the same illumination of 100 mW cm−2 (AM 1.5). The efficiency of the solar cells fabricated with Ar plasma treated SnO 2 photoanodes also showed an enhanced power conversion efficiency. Further characterizations revealed that the surface plasma treatments increased the surface roughness of the photoanodes. Plasma treatment led to the incorporation of nitrogen species and removal of surface impurities resulting in an increase in dye adsorption in the photoanode and hence the enhancement in the efficiency of the DSSC. This study demonstrated a one-pot treatment method for efficiency enhancement which could be used in various applications such as photovoltaic, catalytic and energy generation applications including DSSCs, thin-film solar cells, perovskite solar cells, gas sensing, bio-sensing, supercapacitors, Li-ion batteries and others. [ABSTRACT FROM AUTHOR]