Search

Abstract In this study the nonlocal bond-based peridynamic (PD) theory was applied to simulate Lamb wave transmission in 2D bimaterial plates. Plates of unlike materials were jointed end-to-end to make a bimaterial plate. The surface of the plate was then excited tangentially by single-frequency and multi-frequency force signals. The influence of changing material properties on travelling of the symmetric and antisymmetric Lamb waves were studied in detail. The phase and group velocities of travelling wave in bimaterial plates were calculated and it was found that dissimilar material properties of two joint plates can significantly alter the amplitude and arrival time of the wave. Moreover, Fast Fourier Transform (FFT) of the time history of symmetric Lamb wave velocity was calculated and verified. Accuracy and consistency of PD wave model was confirmed entirely using Spectral Finite Element Method (SFEM). The comparison between the results of two applied methods shows a good agreement. [ABSTRACT FROM AUTHOR]

Abstract: Propagation of the anti-symmetric fundamental Lamb mode (A 0) in a composite laminate containing a semi-infinite delamination was studied through numerical simulations and experimental studies. Here, the wave was generated on a sub-laminate above the delaminated region, and the reflection and transmission of the Lamb modes at the edge of the discontinuity were quantitatively studied. The wave group (named as ‘turning mode’), which was made to propagate from one side of the delamination to the other side (through delaminations) was captured and its transmission factor was estimated. Reflection and transmission factors of wave groups were estimated for three different laminates – quasi-isotropic, unidirectional and cross-ply, containing delamination at various interfaces across thickness. Propagation of ‘turning modes’ were also captured experimentally, employing air-coupled transducers, in quasi-isotropic laminates containing delaminations at different interfaces. Attenuation compensation was incorporated in the experimental signals to improve the comparison of transmission and reflection factors between numerical simulations and experiments. [Copyright &y& Elsevier]