Search

This study explores the implementation of two large micro-channel heat exchangers as evaporators in a refrigeration cycle intended for thermal management onboard future space vehicles. Examined are thermal performances of the two heat exchangers, thermodynamic performance of the refrigeration cycle, and system instabilities. Because of quality differences, different two-phase flow patterns and dryout effects are encountered in the two heat exchangers. A trade-off exists between optimum performances of the evaporators and compressor, with former favoring outlet quality values below unity to guard against dryout, and the compressor favoring a quality equal to or exceeding unity to preclude internal damage to the compressor from entrained droplets. Thermodynamic analysis of the refrigeration cycle shows exergy destruction is minimum when the avionics HX’s outlet quality is close to unity. The system is shown to be susceptible to instability resulting from interactions between compressible volumes both upstream and downstream of the condenser, and inertia of liquid in the condenser. This instability is manifest by pressure oscillations that are sensitive to both flow rate and evaporator heat input. [ABSTRACT FROM AUTHOR]

In this study, the performance of a novel photovoltaic/thermal (PV/T) air dual-heat-source composite heat pump hot water system was investigated experimentally and analyzed theoretically. First, a system that simulates a solar PV/T collector by electric heating was built and tested to validate the superiority of the hot water system. The system was divided into dual-heat-source operating mode and single-heat-source operating mode. Results showed that the average COP and COP sys for dual-heat-source operating mode were 2.49 and 2.24, respectively, and for single-heat-source operating mode were 1.40 and 1.31, respectively, which indicate that the former had better system performance. Then, the actual PV/T collector was used in the system. The results showed that the average electrical gain and heat gain were 278 W and 664 W, respectively. The average electrical efficiency and heat efficiency were 14.5% and 36.02%, respectively. Meanwhile, the comprehensive efficiency was more than 50%. The average COP and COP sys of the heat pump were 4.08 and 3.07, respectively, along with the system exergy efficiency of 0.33. Therefore, the PV/T air dual-heat-source composite heat pump hot water system has excellent performance and is worth promoting and applying. [ABSTRACT FROM AUTHOR]

Highlights: [•] A full factorial analysis is conducted upon a triple absorption heat transformer. [•] The most influential variable settings are determined. [•] Condensation temperature and pinch heat transfer gradient have the greatest influence. [•] Points of optimum exist for the temperatures of the two absorber evaporators. [•] The generator causes the most irreversibility. [ABSTRACT FROM AUTHOR]