Search

Topographic relief and bedrock fractures caused by fault activity can accelerate surface erosion, suggesting that erosion rates increase with decreasing distance to the fault core. To test this hypothesis, we used 10Be cosmogenic nuclides to quantify catchment-wide erosion rates at various distances from a fault in the footwall of the Daqing Shan fault system, a 200-km-long active normal fault in Inner Mongolia, northern China. In addition, in order to examine the influence of topography and bedrock fractures on the surface erosion processes in the fault-weakened zone, their relationships with hillslope erosion, fluvial sediment grain size and transport efficiency, erosion rates, and erosion coefficients were studied. The resulting catchment-wide erosion rates ranged from 0.01 ± 0.00–0.13 ± 0.01 mm yr−1. These erosion rates and coefficients were unaffected by distance from the fault. The analysis of topography, bedrock fractures, and hillslope erosion yielded distinct hillslope erosion processes at different distances from the fault. Rapid mass wasting events, such as landslides, occurred at <15 km from the fault in steep, rocky hillslopes with abundant bedrock fractures. In contrast, at >15 km from the fault, hillslopes gradually become more gentle and soil-mantled. These spatial-slope configuration differences result in a decrease in sediment grain size delivered to river channels with increasing distance from the fault. Once sediments enter river channels, they impact fluvial transport capacity by influencing the initial motion threshold of sediment. Correlation analyses revealed that sediment transport efficiency in channels directly controls the catchment-averaged erosion rate and coefficient. This mechanism explains why the erosion rate remains insensitive to variations in topography and bedrock fractures in fault-weakened zones. • Study of patterns and controls on erosion rate across Daqing Shan fault zone. • Cosmogenic nuclide 10Be used to derive catchment-averaged erosion rate. • Erosion rates do not vary with distance from the fault. • Erosion rate remains insensitive to variations in topography and bedrock fractures. • Sediment transport efficiency in channels controls erosion rate. [ABSTRACT FROM AUTHOR]

Abstract: A three-dimensional flow-sediment model of the Wuhan portion of the Yangtze River was developed using the EFDC (Environmental Fluid Dynamic Code) in order to study the changing riverbed. The model was also calibrated and validated by daily measuring of the water surface elevation and using suspended sediment concentration data secured from June 1 to September 30, 2004. Based on this model, the mobile sediment on the riverbed was simulated for the high water period of the Yangtze River. The results indicate that erosion is the main issue, with maximum erosion (0.27m) occurring at the banks of Tian Xingzhou. In addition, according to a suspended sediment concentration analysis for the Han Kou Hydrologic Station section of the river, the concentration there increased from left bank to right bank. [Copyright &y& Elsevier]

Abstract: Sediment dynamics have an important influence on the morphological evolution of tidal wetlands, which consist of mudflats and salt marshes. To understand the nature of sediment behavior under combined current–wave action at an exposed tidal wetland, we measured the waves, currents, water depths, bed-level changes, and sediment properties at a mudflat–salt marsh transition on the Yangtze Delta, China, during five consecutive tides under onshore winds of ~8m/s, and calculated the bed shear stresses due to currents (τ c ), waves (τ w ), combined current–wave action (τ cw ), and the critical shear stress for erosion of the bottom sediment (τ ce ). The bed shear stresses under combined current–wave action (τ cw ) were approximately five times higher on the mudflat (up to 1.11N/m2; average 0.27N/m2) than on the salt marsh (up to 0.14N/m2; average, 0.06N/m2). On the mudflat, τ cw was larger than the critical erosion shear stress (τ ce =0.103N/m2) for 70% of the period of submergence, whereas τ cw was always lower than τ ce at the salt marsh site (τ ce =0.116N/m2). This result indicates that the sediment dynamics on the mudflat were dominated by erosion, whereas at the salt marsh they were governed by deposition, which is in agreement with the observed bed-level change during the study period (−3.3mm/tide on the mudflat and 3.0mm/tide on the salt marsh). A comparison of τ cw values calculated using the models for bed shear stresses under combined current–wave action indicates that both models are applicable to the present case and effectively predict the bottom shear stress under combined current–wave action. Overall, we conclude that τ cw in combination with τ ce is useful in assessing the hydrodynamic mechanisms that underlie the morphological evolution of exposed tidal wetlands. [Copyright &y& Elsevier]

Abstract: This paper summarizes process-oriented field and numerical studies undertaken on the river plume in the partially-mixed Changjiang River estuary. Both estuarine circulation and tidal asymmetry are of great importance to the fine sediment processes. Mean suspended sediment concentration (C̄) and bottom shear stress are the dominant physical parameters controlling the flocculation and settling velocities (w s ) of mud flocs in suspension. Two important physical processes are revealed by acoustic imaging, i.e. (i) the near-bed impulsive resuspension and (ii) the transport processes driven by fine sediment-induced plumes during a spring tide. A turbidity maximum, associated with a suspended sediment front, is observed. Its formation is caused mainly by tidal asymmetry, near-bed periodic tidal resuspension and turbulence suppression by suspension/salinity stratifications. A conceptual sketch of the turbidity maximum is cautiously proposed for the Changjiang River estuary. Four different settling velocity equations, taking flocculation into account, have different effects on the modeled concentration profiles of fine sediment: apparently, Cao and Wang (1994, pp. 252–253) would be the best for spring tide and Thorn (1982, Fig. 3/page 66) for neap tide. Both tidal acceleration and tidal deceleration have strong effects on the concentration profiles of fine sediment within the Changjiang River estuary. [Copyright &y& Elsevier]