Search

• The paper has a focus on energy consumption habits and trends using statistical methods. • Occupants' behavior is monitored using smart metering system and awareness surveys. • The impact of a serious game on occupant's behavior is evaluated. The paper has a focus on energy consumption habits, trends and intervention strategies in residential buildings, mainly through the serious game approach with a combination of direct consumer feedback through smart metering. More than 150 homes in France and Spain have been involved in the research experiment and the consumption habits of approximately 50 homes were deeply analyzed. The applied methods, processes, results and findings of the monitoring data analysis are presented in the paper with two aims. First, consumption profiles and trends were determined for apartment homes with regard to heating, domestic hot water and electric consumption. Second, the impact of a serious game experiment was assessed comparing energy consumption, indoor air temperature and users' habits (based on questionnaires) before and after launching the experiment. [ABSTRACT FROM AUTHOR]

The operation of solar photovoltaic installations for many years may lead to problems such as reduced energy efficiency and aging of components. Under this framework, replacing certain components in the facility to extend the service life of the power plant is viewed, in some cases, as a feasible strategy. However, despite its enormous strategic interest for the solar PV industry, we find that revamping PV installations has been the focus of very few scientific publications, and even less so when it comes to analyzing real facilities. Thus, this paper performs a techno-economic analysis of three revamping strategies at a real PV power plant located in the south-east of Spain. The strategies consist of substituting, in each case, the PV modules, the inverter, and both components. The simulated results show that the highest production value by installed power is obtained when both the modules and the inverter are replaced. In the same vein, the economic analysis reveals this scenario as the most favorable in terms of profitability. Based on the results obtained, an interesting future line of research would be focused on the extension of the analysis at country level to study the joint impact of numerous revamping actions. • Techno-economic analysis of revamping projects of a real solar PV power plant. • Replacing modules and inverter emerges as the most feasible strategy. • Study's applicability extends to other revamping initiatives and geographical regions. • Economic outcomes allow the most cost-effective alternatives to be determined. • This research can contribute to efficient and sustainable energy planning. [ABSTRACT FROM AUTHOR]

The Basque Y High Speed Rail connection between Madrid and the Basque Autonomous Community is, quite exceptionally, a mixed freight and passengers HSR line, that has been presented as a fundamental step towards a more sustainable mobility. In this paper, a life-cycle assessment (LCA) is conducted to assess the environmental performance of the line throughout its lifetime, based on the latest data available, including both construction and maintenance burdens. Results show that this new corridor is not justified in terms of reducing emissions and energy consumption, mainly due to its low transport density. It also has a negligible impact on Spanish current low rail freight traffic. We conclude, therefore, that Spain needs to reconsider its AVE network expansion if aiming at increasing rail's modal share and meeting the emissions targets set by the EU. From a policy perspective, many information inconsistencies have been found regarding the demand projections of freight transport, which cast serious doubt about the decision-making process behind Trans-European transport projects. [Display omitted] • Life-cycle assessment (LCA) of the Basque Y high-speed rail line under construction in 2023. • It verifies whether this project is justified in terms of environmental impacts reductions. • Net balance of the Basque Y high-speed rail is very modest, when not detrimental. • This project would not be justified in terms of environmental impacts reductions. • Alternatives to high-speed rail in the transport hierarchy provide better environmental balance. [ABSTRACT FROM AUTHOR]

• Energy Communities analysis and review in Europe and, more specifically, in Spain. • Promoting energy poverty reduction and cooperation through Energy Communities. • Real case study focused on reducing energy poverty in the city of Getafe (Spain). • Selection of public buildings to implement energy community in two neighborhoods. • Significant electricity bill reductions for energy poverty households. Advancements in renewable energy technologies, a growing awareness of the need for sustainable energy solutions, and the emergence of new business models in the energy sector, have contributed to the growth of Energy Communities. Public entities can find in energy communities today an opportunity to tackle energy poverty, to increase the cooperation among citizens and to empower them to be a more active player within the energy sector. This paper analyzes energy communities in Europe and focuses specifically on Spain; considering the three beneficial aspects previously mentioned. It aims to obtain ground truth about the applications of these new citizens' arrangements. A citizen-led initiative at the city of Getafe (Madrid, Spain) is included and discussed in detail. This case study focused on reducing energy poverty of its participants. An energy community was designed and implemented as a collective PV solar self-consumption infrastructure. The roofs of various public buildings in the two case study neighborhoods were selected for locating the PV installations. Real metered data were used to evaluate the solution. A public building was selected for the energy community, considering generation on roof and dwellings proximity. The results provided that out of the 77% PV generations could be used to contribute to the demand of 100 residences; while the resulting 23% would provide approximately 60% of the energy demand of the public building. The setting up of the Energy Community not only had the technical part but also included workshops seminars and information sessions, to ensure that people prone to benefit and maximize its impact. [ABSTRACT FROM AUTHOR]

The low energy efficiency of the European building stock is both a social and environmental issue. However, plans and studies on energy retrofitting interventions do not usually evaluate the impact of these measures on households' energy affordability. This paper analyses and compares the effect of alternative retrofitting strategies on thermal energy services' affordability in Spanish vulnerable households. This analysis was carried out by applying the Required Thermal Energy Expenditure model proposed in previous studies to several 2030 residential building stock scenarios, setting 2020 as a baseline. Therefore, this work proposes a methodological approach to assess the impact of the considered energy efficiency interventions on energy poverty in winter (WEP) and summer (SEP) and carries out both a 'social cost' and a cost-benefit analysis. The dwelling's thermal-enclosure retrofitting stands out as a very WEP-reduction and social-cost effective measure. Instead, replacing old thermal systems with more efficient ones would have a higher impact on SEP. Combining both kinds of retrofitting measures could reduce heating and cooling required expenditures by, respectively, 49% and 59%, and decrease the WEP and SEP share, correspondingly, by 35% and 63%. These results might inform policymakers to enhance the targeting and design of energy efficiency programs. [ABSTRACT FROM AUTHOR]

This paper reports on the environmental impact assessment of a specific urban fabric: the housing estate. This urban-growth typology arose in the second half of the twentieth century to supply the existing needs of the time. It involved short-term processes, reduced costs, and lower comfort standards, which are far from present European guidelines. Currently, they represent situations of unsustainability in cities worldwide that are undergoing improvement. Here, the environmental impact assessment and minimization for urban organisms (EIAMUO) methodology is presented. This consists of a system of eco-indicators created specifically for estimating the impacts associated with these fabrics. Through its practical application, a snapshot of the current situation is achieved and the targets designed to minimize the environmental impact are proposed. [ABSTRACT FROM AUTHOR]

This paper presents a study of the thermal performance of a single-family house located in a coastal city in northern Spain that was built according to Spanish standards during the 1990s. The study estimates an annual energy demand of around 95 kWh/m 2 and a thermal power rating of the heating system of around 16 kW. The potential energy savings that would be obtained by implementing different retrofitting measures frequently used nowadays are also quantified: installing a ventilation system with heat recovery, improving the insulation of opaque construction elements, replacing the existing windows with high-thermal performance windows, and reducing air infiltration rates. These integrated actions on the house would reduce the annual energy demand below the requirements of both the Technical Building Code (24.24 kWh/m 2 year for this case of study), which is the regulation currently in force in Spain, and the well-known Passivhaus standard (15 kWh/m 2 year), which is one of the most widespread building standards in Europe. Compliance with these requirements means that the annual energy demand and the size of the heating system would respectively be potentially reduced by 81% and 57% of the present values. [ABSTRACT FROM AUTHOR]

Energy performance certificate databases are a key tool for mapping national building stock and thus fostering greater overall energy efficiency. This paper presents an insight into the energy performance of residential and tertiary sector buildings in Spain, through an analysis of the first 129,635 energy performance certificates issued for existing buildings, collected by the Catalan Institute of Energy. Most of the residential buildings or building units that were studied were “E” class (53.6%). Single-family houses were found to use more energy on average (248.0 kWh p /m 2 ) than individual dwellings (183.2 kWh p /m 2 ). Tertiary sector buildings were found to have slightly better energy performance (26.4% of buildings were rated “D class”), with an average energy consumption of 317.8 kWh p /m 2 . Modern buildings consume less energy, as they must meet the higher energy performance requirements stated in thermal building regulations. Residential buildings or building units located in hotter climate zones consume slightly less energy than those located in colder zones, mainly because heating accounts for a high percentage of overall energy expenditure (70–75% in residential buildings). A significant proportion of the energy consumed in tertiary sector buildings is for lighting (37.2%). This research defines the current energy consumption baseline of existing buildings in Spain. The results can help to prioritize energy conservation efforts according to building type, construction period, climate zone and specific end-uses. They may also help public authorities to plan future energy policies, and construction practitioners to identify market segments and business strategies. [ABSTRACT FROM AUTHOR]

Abstract: The first objective of this paper is to map the adoption of technologies for the reduction of energy and resource consumption in production and the second is to test the relationship between the implementation of those technologies and the performance of manufacturing firms. The aim is to contribute to the identification of the characteristics of the manufacturing firms that use this kind of innovative technology in order to help policy makers promote energy and resource efficiency in a suitable manner. Our research is based on the Spanish and Slovenian subsamples of a wider European Manufacturing Survey. Our suggested models explain how significant energy efficiency is, and how much of the variability in economic performance and environmental performance it can explain. The results show that the use of energy and material saving technologies does not have a clear and significant relationship with economic performance. On the other hand a significant positive relationship is found between energy and material saving technologies and environmental performance. [Copyright &y& Elsevier]

Abstract: This paper presents a solar field configuration to supply thermal energy to the heating and air conditioning system of a hotel located in Almería (Southern Spain). The solar collector technology selected for the solar field is parabolic trough collector (PTC) technology, in particular a small sized PTC prototype especially designed for industrial process heat and air-conditioning systems. Each PTC collector is 8m long and its aperture length is 1m. The heat transfer fluid in the solar field is pressurized hot water. Considering the space available for the solar collector field just close to the hotel and its thermal energy demand profile, the solar field configuration proposed consists of 8 parallel rows, north-south oriented, composed of 32 PTCs connected in series. With this solar field configuration, 25% of the cooling demand is covered the hottest day of the summer and 76% of the heating demand is covered the coldest day of the winter. [Copyright &y& Elsevier]

Abstract: This paper presents a regression analysis of energy consumption in the banking sector. In our case study, the target area is the Spanish banking sector, for which we divide the available data into a prediction and a validation subset. Power models were developed using test data from 55 banks. From the analysis, three models were obtained; where the first proposed model can be used to predict the energy consumption of the whole banking sector, while the rest of the models estimate the energy consumption for branches with low winter climate severity (Model 2) and high winter climate severity (Model 3). Models 2 and 3 differ from the first model in that they need independent variables measured in situ. As a result, the uncertainty of the response variable in the function of the independent variables is reduced by 56.8% for the first model and by 65.2% and 68.5% for the second and third proposed models, respectively. The validation of the first model, which is the model with the lowest determination coefficient, shows that this model is appropriate for predicting the energy consumption of bank branches with good energy consumption performance and detecting inefficiencies in bank branches with poor energy consumption performance. [Copyright &y& Elsevier]

Abstract: Life Cycle Assessment (LCA) has been conducted for seven experimental cubicles located in Puigverd de Lleida (Spain). The objective of this experimental set-up is to test different constructive solutions in order to point out the most sustainable solution with lower energy demand during the operational phase. Therefore, different building, insulation and Phase Change Materials (PCMs) have been tested under controlled temperature conditions to examine the thermal performance of the whole system. Although some of these materials are able to reduce the energy demand and consequently the environmental impact during the operational phase, they still have high embodied energy that can cause high environmental impact during the manufacturing phase. Therefore the LCA study in this paper focuses on assessing the impact of the embodied energy needed during the manufacturing and disposal phase by highlighting and comparing the effect of using different building materials, insulating materials, and phase change materials. [Copyright &y& Elsevier]

Abstract: Demand response has proven to be a useful mechanism that produces important benefits for both the customer and the power system. In the context of an increasingly competitive electricity market, where prices are constantly rising and the presence of renewable energy resources is gaining prominence, this paper analyzes the flexibility potential of customers in the meat industry, based on the management of the most energy consuming process in this type of segment: cooling production and distribution. The effectiveness of the proposed actions has been successfully tested and validated in an active factory that produces cured ham in Spain, where savings of about 5% in the total annual cost of electricity have been assessed, together with power reductions in the range of 50% of the total peak demand of the studied facilities. Such results demonstrate the efficacy of these techniques, and they open the door to an innovative perspective on the evaluation of flexibility among customers which are traditionally considered rigid, providing a novel approach to the management of customer infrastructures in order to exploit their flexibility in electricity markets. [Copyright &y& Elsevier]

Abstract: Numerous computer programs are available to calculate the energy efficiency of buildings. Many are based on the use of a reference building to determine the degree of efficiency. However, this methodology presents a major constraint when assessing a building after construction and during the use stage. To assess the energy efficiency of buildings, this paper proposes new indices based on energy consumption during different periods; as well as other parameters of the buildings such as construction area, number of users, and air-conditioned volume. Results are presented as an application for various buildings on the campus of the Universidad Politécnica de Valencia. [ABSTRACT FROM AUTHOR]

Abstract: The aim of this paper is to carry out a comparative study with regard to energy consumption and greenhouse gas emissions, in respect of two types of engines with three different fuels. The fuels analysed are diesel, biodiesel 30% (B30) and compressed natural gas (CNG). The engines tested were a spark ignition engine (Otto cycle) and two compression ignition engines (Diesel cycle), the first fed with CNG and the last two with B30 and diesel. What is new about this study is its scope of application concerning refuse collection services in the city of Madrid. The tests were carried out on refuse trucks of the FCC Company along actual urban routes in the city of Madrid. Also taken into account were the energy input and the greenhouse gases emitted for each of the paths taken by the fuels analysed, from resource recovery to delivery to the vehicle tank. [Copyright &y& Elsevier]

Hot-dip galvanisation (HDG) is the method most commonly used to protect steel surfaces from corrosion. However, HDG involves very intensive consumption of energy and resources. This paper aims to evaluate the environmental performance and hotspots in the Spanish HDG sector using cradle-to-gate life cycle assessment (LCA). Two Spanish HDG industrial plants, with different galvanisation capacities and manufacturing processes, were selected for the case study. The LCA revealed that the consumption of energy, fuels and nonrenewable resources were the most relevant environmental burdens at both plants. Steel was the main contributor, as it had the greatest influence on the plants' environmental profiles. The consumption of primary zinc and natural gas, used to dry and heat the molten zinc bath, also contributed to the impact of the HDG plants. This work proposes a normalisation to compare the Spanish sector against a European reference based on the average of 66 companies in 14 countries. The impacts of the Spanish HDG plants being studied were generally below the EGGA values, although the results are strongly influenced by the type of steel and the degree of material reuse implemented in the steel manufacturing process. The study lays the foundations for improvements in the resource efficiency and productivity of galvanisation plants. We propose alternatives such as the use of secondary zinc or modifications that will extend the lifespan of pickling baths, which would contribute to a more sustainable use of resources in the galvanising industry. Image 1 • The hot-dip galvanisation (HDG) sector in Spain was assessed via LCA. • Two HDG plants with different production properties provided detailed data inventories. • The highest impacts were found in the production of steel and primary zinc. • Using secondary zinc and extending pickling bath's lifespan would improve HDG. • The impacts of the Spanish HDG plants were generally below the European average. [ABSTRACT FROM AUTHOR]

Given the climate change emergency, reducing energy consumption, which is responsible for most greenhouse gases emissions worldwide, is a priority. However, the strong historical link between energy consumption and economic growth questions whether continued economic growth is compatible with energy conservation targets. Conventional final energy analysis (common analysis methods applied at the final energy stage) has provided limited insights to this nexus. In response, this paper explores the extent to which useful stage analysis provides additional insights using three common methods: aggregate energy-economy analysis (growth rates, energy intensities, and Index Decomposition Analysis), energy-GDP causality testing, and Aggregate Production Function modelling, using Spain (1960–2016) as empirical case study. The results reveal that of the three methods investigated, aggregate energy-economy analysis provides the greatest insights, including that Spain is far from achieving absolute energy-GDP decoupling. Further, moving to the useful stage indicates that the extent of decoupling is even less than suggested at the final energy stage, and that increasing final energy consumption has historically fully offset efficiency gains. In contrast, whether applied at the final energy or useful stage, energy-GDP causality testing and Aggregate Production Function modelling reveal little about the energy-economy nexus — the results even suggest that these tools are not appropriate and may mislead. Thus, useful stage analysis is necessary but not sufficient for delivering further energy-economy insights; there is also a need for exploring alternative, reliable, energy-economy analysis methods. Indeed, the lack of robustness of Aggregate Production Function modelling and energy-GDP causality testing is worrisome. • Final energy analysis has delivered limited insights to the energy-economy nexus. • Three common analysis methods are assessed at both final and useful energy stages. • Aggregate energy-economy analysis yields additional benefits at the useful stage. • Energy-GDP causality testing and Aggregate Production Functions lack insights at both energy stages. • A move to alternative, useful stage energy-economy analytical methods is required. [ABSTRACT FROM AUTHOR]

• A methodology to assess energy flexibility of building clusters in a GIS framework. • Building clusters become energy prosumer by deep renovation and renewable energies. • It aims to integrate a wider spatial decision tool for environmental public policy. • Comfort thermal indexes quantify energy flexibility to measure peak load reduction. • Cluster design approach may help reduce investment costs and reach cost optimality. Natural resource depletion, global warming and pollution pose substantial threats in prioritizing environmental policy, both for private organizations and for governments. Half the EU building stock is prior to energy efficiency standards, thus making it an urgent challenge for the EU to aim at decarbonized cities by 2050. Urban energy retrofitting at cluster level represents a major opportunity, as its current rate is lower than an annual 1%, 3% being the EU desirable rate. This paper presents a bottom-up methodology to assess energy flexibility of building clusters within a Geographic Information System (GIS) framework, applied on a district scale. Energy performance certificates and GIS-based data permit diagnosis and neighborhood selection. The methodology evaluates building cluster energy flexibility via energy demand reduction and PV production. The results show the building cluster hourly load profile for heating and cooling, and thermal comfort indexes. It is expected that this GIS-based methodology will become part of a wider spatial decision support tool for environmental public policies contributing to building stock transformation, from energy consumer to prosumer through deep renovation and renewable energy use. Finally, this methodology is adaptable to other climates, particularly within Spain. [ABSTRACT FROM AUTHOR]