Search

Recently, auxetic metamaterials have turned into an area of growing interest, because of their deformation uniqueness, design flexibility, and functional diversity. To achieve their programmable design of densification and energy absorption, the variable stiffness factor method (VSF) emerged. However, the energy absorption capacity of the metamaterials designed by this method has a significant reduction. In this work, to remedy this defect, several different lightweight specimens are proposed and fabricated to extend the stage of energy absorption and retain the tunability. Then quasi-static compression tests and finite element methods are carried out to analyze the mechanical properties of the designed boundary-constrained structure (BCS) and X-shape constrained structure (XCS). The accuracy of the densification points and energy absorption capacity of the two structures at different VSF values are also studied. The results show that the densification points of the designed structures can be adjusted quantitatively, and their deformation modes are more stable than conventional structures during compression. Furthermore, their specific energy absorption is four and five times higher than that of non-lightweight structures with VSF = 40%, respectively. These findings contribute to advancing the implementation of auxetics in applications of multistage protective structures. • A lightweight metamaterial based on the variable stiffness factor (VSF) method is proposed. • The proposed structures realize multi-level energy absorption and stable deformation. • The SEA of proposed structures was 4 and 5 times higher than that of VSF = 40% structure. [ABSTRACT FROM AUTHOR]

• An aluminum foam filled re-entrant aluminum honeycomb structure (FRAH) is designed and investigated. • The proposed FRAH possesses higher specific energy absorption compared to the structure without filling aluminum foam. • The concept of the functional gradient (FG) is introduced into the composite re-entrant honeycombs. • 4. The FG design of the composite structure could reduce the initial peak stress and increase the platform stress value. Auxetic materials have been widely studied in recent years due to their excellent mechanical properties and special deformation modes. However, the application of auxetic materials in practical engineering is limited by the low stiffness. Therefore, in order to broaden the range of applications, it is significant to improve the stiffness of auxetic materials. In this study, the re-entrant aluminum honeycomb is combined with an aluminum foam. The mechanical properties and deformation modes of the aluminum foam filled re-entrant aluminum honeycomb are studied experimentally and numerically. In addition, the effects of the geometrical parameters of such a honeycomb are investigated. The results indicate that the stiffness and the energy absorption capacity can be effectively improved by filling the re-entrant honeycomb with aluminum foam. Due to the high compressibility of aluminum foam, the structure can still retain the auxetic effect at a large strain. In addition, the concept of the functional gradient is introduced into the field of composite re-entrant honeycomb, and the influence of angle gradient and thickness gradient on the structure is analyzed. The results show that the composite structure with the designed functional gradient outperforms the uniform composite structure in terms of initial peak stress and the stress value at the platform stage. Due to its superior performance, the proposed auxetic composite structures hold promising applications in the fields of vehicle engineering, protective engineering and aerospace engineering. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • An assembled auxetic chiral honeycomb (AACH) is designed and manufactured by 3D printing. • The AACH could exhibit lower peak force and high stress plateau. • The external energy is mainly absorbed by the vertical wave plate. • The AACH provides a new idea for the industrial manufacturing of auxetics. Auxetic metamaterials tend to be fabricated using additive manufacturing and laser cutting due to their special porous microstructures. Although the auxetic metamaterials have many applications currently, the high cost and the low efficiency of available manufacturing are adverse to expend their application range. In this work, the auxetic chiral honeycomb is assembled crosswise using the slotted wave plate. Effects of wave radius, plate thickness, slot percentage, and base material on the Poisson's ratio and mechanical performance are explored experimentally and numerically. The results show that assembled auxetic chiral honeycomb (AACH) exhibits lower peak force and high plateau stress than the conventional assembled one. With the increase of wave radius and plate thickness, the energy absorption (EA) and specific energy absorption (SEA) would increase. As for the different material combinations, when the base materials in vertical and horizontal wave plates adopt stainless steel and aluminum, respectively, the AACH would exhibit desirable EA, SEA, and auxetic behavior. These findings provide a new approach to the manufacture of auxetics at a low cost, which is beneficial for potential applications. [ABSTRACT FROM AUTHOR]

• A simple re-entrant auxetic metamaterial is designed by rotating and connecting 2D re-entrant honeycomb cells. • The energy absorption of the proposed metamaterial is discussed under different design parameters. • The proposed 3D re-entrant auxetic lattice has desirable stiffness and specific energy absorption. • The initial peak stress and energy absorption capacity of the metamaterial can be adjusted via changing design parameters. As a branch of auxetics, the re-entrant hexagonal honeycomb has many superior mechanical performances. However, most research focused on two-dimensional (2D) re-entrant structures or three-dimensional (3D) structures without high compressibility. The energy absorption capacity of such structures is deficient for practical applications. Therefore, it is important to investigate the 3D re-entrant honeycomb structures which can sustain large deformation in order to make the most use of the materials. In this work, a simple 3D re-entrant unit cell is designed, manufactured and examined. The influence of geometric parameters on the deformation mode and energy absorption capacity is investigated numerically. The experimental results are in good agreement with the finite element prediction. The proposed 3D re-entrant auxetic metamaterial not only possesses a greater bearing capacity but also presents a stable compression deformation. The structure exhibits a desirable energy absorption behavior, including obvious auxetic behavior and a long stress plateau. By adjusting the geometrical parameters of the structure, the performances of energy absorption and compression stiffness can be improved. These findings provide a new idea to design 3D auxetic metamaterials and promote their utilization in protective structures. [Display omitted] [ABSTRACT FROM AUTHOR]

Double arrowhead honeycombs (DAHs) are auxetic cellular materials with negative Poisson's ratio (NPR). The quasi-static and impact behaviors of both uniform and functionally graded DAHs are explored. Analytical expressions for the in-plane Young's modulus, Poisson's ratio and quasi-static yield stress of uniform DAHs are derived and are found to be consistent with finite element (FE) predictions, showing that the quasi-static yield stress of DAHs is dependent upon the geometrical parameters and NPR. Systematical simulations of uniform DAHs subject to different impact velocities reveal that there exists a critical impact velocity beyond which the dynamic plateau stress is insensitive to the effect of NPR. A semi-empirical expression of the plateau stress is obtained. For functionally graded DAHs, they are shown to only have improved energy absorption capacity under high velocity impacts. Moreover, the results of uniform DAHs are shown to be able to be adopted to interpret the simulated plateau stress of functionally graded DAHs under impact loading. The deformation mechanisms associated with the impact resistance of DAHs are also discussed. [ABSTRACT FROM AUTHOR]