Search

[Display omitted] • 28 out of 57 target PFAS were detected in paper products from China. • 9 groups of PFAS with 1–3 confidence levels were identified by non-target analysis. • Ethanol in food simulants can increase the migration of PFAS. • Long-chain PFAS in popcorn bags can be degraded by microwave heating. • PFAS in some paper products exceeded the recommended daily intake values. The contamination characteristics, migration patterns and health risks of per- and polyfluoroalkyl substances (PFAS) were investigated in 66 Chinese paper products by using target and non-target screening methods. Among 57 target PFASs, 5 and 6 PFASs were found in the hygiene paper products (

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area. [ABSTRACT FROM AUTHOR]

China's paper industry accounts for a larger proportion of the global paper industry and consumes large amounts of energy. Energy conservation and pollution reduction of the industry have become the focus of China's national development strategy. Energy efficiency is an important index which directly determines the amounts of energy consumption and pollution emissions. To understand the energy efficiency evolution of China's paper industry, this paper establishes an input-output data of the paper industry for 29 provinces in China and applies DEA method and econometric models to estimate and comprehensively discuss the energy efficiency issues based on the framework of total factor efficiency. Our results indicate that China's paper industry has a large energy saving potential even though its energy efficiency has improved during the period 1990–2013. The saving potential is about 65% under the meta-frontier and 44% under the group-frontier. Moreover, there are significant differences between different regions in production technology and energy efficiency. The performance of eastern China is better than other regions. But the technology gaps between the different regions are shrinking and converging over time. Finally, some policy recommendations are proposed to improve the energy efficiency of the industry. [ABSTRACT FROM AUTHOR]

China’s paper industry consumes a lot of energy and emits huge amounts of pollutions. The Chinese government over the past decades has done a lot to promote energy efficiency of the industry. This paper studies the impact of industrial polices to improve energy efficiency. The energy efficiency change is firstly studied under a framework of total factor efficiency. On this basis, different econometric models are built to discuss the detailed energy efficiency characteristics of the paper industry. The main results are as follow: (i) ownership structure did influence the energy efficiency, but the influence is different in different conditions; (ii) energy efficiency of the paper industry can be improved by economies of scale; (iii) market competition can to some extent overcome the motivation and supervision problem that often occur in state-owned companies; (iv) energy price cannot play the role of resource allocation well in China. Finally, based on our findings, some suggestions are provided. [ABSTRACT FROM AUTHOR]

The papermaking industry has developed rapidly in recent years in China. Papermaking is a high-energy-consuming process. Consequently, large-scale paper mills usually have cogeneration systems that supply both electricity and steam for the papermaking process. In China, almost all these cogeneration systems in paper mills are powered by coal combustion, which consumes a large amount of energy and emits large amounts of greenhouse gas. The Integrated Gasification Combined Cycle (IGCC) technology is regarded as a clean and efficient method of coal utilization. In this work, an IGCC process for application in paper mills was designed and modeled. An IGCC coupled with a cascade refrigeration process (CRP) was further proposed in order to reuse the waste heat from the dryer section and improve the energy efficiency of the papermaking process. A paper with a conventional cogeneration system, one with an IGCC cogeneration system, and one with an IGCC coupled with a CRP cogeneration system were analyzed and compared in terms of energy efficiency, capital investment, operational cost, and dynamic payback period. The results showed that the integration of IGCC technology allows paper mills to be more competitive than those featuring conventional cogeneration systems in terms of energy efficiency and operational cost. [ABSTRACT FROM AUTHOR]

China has become the world largest paper and paperboard producer. However, pulp and paper industry has involved high resource consumption and severe pollution especially for water. This research has assessed the eco-efficiency of China's pulp and paper industry at the national level and provincial level. An overview regarding the cleaner production of China's pulp and paper industry was presented to reveal the measures for reducing environmental impact in the last two decades. Slacks-based measure was used to analyze the efficiency levels of 16 provinces' pulp and paper industries. To uncover the underlying causes of eco-efficiency performance, Malmquist–Luenberger index was calculated to discover the drivers of productivity growth of pulp and paper industries. Our results showed that the pollution treatment of China's pulp and paper industry has made progress in terms of water consumption and water pollution, although the absolute amount of pollution discharge is still large. Chemical oxygen demand emissions are still the first critical influencing factor of pulp and paper industry's inefficiency. Furthermore, efficiency progress was the dominating contribution of the industry's productivity growth between 2010 and 2013. The policies for adjusting the industrial structure of pulp and paper industry have resulted in the scale effects through eliminating backward production capacity and accelerating merger and acquisitions. Moreover, the productivity of pulp and paper industry was underestimated when the undesirable outputs were ignored. It indicates that the stricter environmental regulations have positive effects on paper companies to internalize environmental pressures in the production activities through environmental management. In the future, pulp and paper companies should further internalize the cost of pollution treatment through scale effects and technology improvement. [ABSTRACT FROM AUTHOR]

Research on soil microplastics is currently at an early stage, and there is no widely approved sampling protocol. Even so, any basic research should minimize errors to ensure that they are not amplified in future research. This paper examines some weaknesses of the original research paper 'Soil microplastic pollution under different land uses in tropics, southwestern China' recently published in this journal. The authors neglected to report the equipment used for soil sampling and did not use field blank samples. There is also a soil layer that was incorrectly named. The type and pore size of filter paper used for filtration during pre-analytical soil sample preparation is very important. In this paper the nature of the filter paper used, and its larger pore sizes are questionable by today's scientists. In addition, the authors in the original paper also overlooked reporting the statistical package used for statical analysis and ensuring if all data sets obey normality, homogeneity, and equality before running the one-way ANOVA test. This statistical step is widely considered mandatory, especially in the soil science community. So, this makes it difficult to trust the results documented. Furthermore, in the original paper, the needle and stereo microscope instruments used to sort microplastic-like materials prior to proper analysis are not reliable. [Display omitted] • A dissecting needle and stereo microscope shouldn't be used to sort out soil microplastics. • Gold-coated filter paper with smaller pore size is better than nitrocellulose filter paper. • The 0–10cm is the top soil layer and 10–20cm is the subsoil layer not a deep soil layer. • The statistical package used for analysis must be documented accordingly. • If the dataset is a normal distribution prior to ANOVA testing, it must be confirmed and reported. [ABSTRACT FROM AUTHOR]

Abstract: Papermaking enterprises are major polluters that cause water pollution and air pollution. This paper aims to provide analysis of the energy saving and emission reduction in papermaking enterprises.It is the inevitable choice of establishment industrial ecology park as the leading of the papermaking industry by the implementation of cleaner production and circulation economy. Shandong Haiyun efficient ecological park is taken for example.Researches of the developing strategies and policy support of energy saving and emission reduction is discussed. The paper is divided into five parts, the first part is the preface, the second part introduces the general of Haiyun efficient industrial park, the third part puts forward the scheme of clean production of Haiyun efficient ecological industrial park, the fourth part puts forward ecological industry pattern of Haiyun efficient ecological industrial park, the fifth part puts forward policy guarantee measures, and the sixth part makes the summary. [Copyright &y& Elsevier]

Abstract: Recent years have seen increasing demand for wider application of strategic environmental assessment (SEA), especially SEA of major policies, as a powerful instrument to safeguard the environment during the rapid industrialization and urbanization in China. Debates on SEA are concentrated on its feasibility and effective implementation in practice. This study applies Emergy analysis within the framework of social–economic–natural complex eco-system theory to overcome the limitations of methods used for assessing regional sustainability so far. This established model is tested in the case of Chinese paper industry to assess the sustainability of 5 policy scenarios. The results show that Emergy-based Indices (EbI) are more effective to measure the sustainability of industry complex ecosystem, thus EbI approach is very useful in SEAs on policy scenarios of a given complex ecosystem. [Copyright &y& Elsevier]

As a traditional energy and carbon intensive sector, it becomes imperative for the global paper industry to realize green development. This paper aims to provide guidance for the green transformation of global paper industry by evaluating the global paper industry green development level in a systematic and dynamic way. This paper employs text-mining method to develop paper industry green development evaluation indicator system and adopts market-extended LCA model and entropy-TOPSIS method to calculate the paper industry green development level of 48 countries/regions. The results show that during 2000–2030 the paper industry green development level of developing countries improves faster than developed countries, where those of developing and developed countries increase from 0.3369 to 0.3938 and from 0.5120 to 0.5517 respectively and the gap between them narrows from 0.1751 to 0.1579. The comparative analysis reveals that the paper industries of developed and developing countries are in different green development stages. Developing countries, represented by China, improve greatly in economic and social dimensions, but decline seriously in ecological dimension due to enlarging resource consumption and environmental damages. On the contrary, developed countries tend to saturate in economic and social dimensions and have been improving fast in ecological dimension, gradually realizing the decoupling of industrial economic development and environmental damages. To further promote the global paper industry green development, developing countries should focus on promoting the coordinated development between economic growth and environment protection and developed countries should play a leading role in the global green transformation by promoting optimal allocation of resources and cross-regional communications of green technologies. • A paper industry green development indicator system is developed based on text mining. • A global paper industry green development model is built with market-extended LCA. • Complex interactions among the indicators are internalized in the evaluation. • A spatial-temporal analysis is performed on global paper industry green development level. [ABSTRACT FROM AUTHOR]

Straw pulp in China, which is the world's largest producer of this material, suffers from water and energy shortages during its entire life cycle. However, limited systematic studies have focused on these issues, and decision makers need be provided with improvement methods for the environmental performance. Thus, an impact-oriented energy and carbon coupled water footprint analysis was conducted in this study based on ISO standards. Results showed that the impact of energy consumption and carbon emissions exceeded that of water footprint. Carcinogens, non-carcinogens, and freshwater ecotoxicity also played effective roles in improving the environmental performance. Optimizing key indirect processes, including chemicals production, steam preparation, electricity generation, wood pulping, and fertilizer recovery, dominated the reduction in environmental burdens. Direct freshwater consumption and wastewater disposal played additional effective roles in controlling water footprint. The water network was thus optimized by a water pinch analysis to decrease the freshwater consumption and pollutant emissions by maximum values of 91.5% and 99.7% after optimization, respectively. Meanwhile, carbon dioxide, methane, chromium, arsenic, mercury, titanium, copper, strontium, total nitrogen, total phosphorus, BOD 5 , and COD were the main pollutants. Overall, the environmental impact can be further reduced by diminishing coal power ratio in national energy structure, adopting recovered steam, and considering multistage regeneration water network to cope with different water use demands. • LCA-based energy and carbon coupled water footprint of straw pulp paper was applied. • Optimizing water network by water pinch method gained marked environmental benefit. • Electricity, steam, and chemicals exerted high impact among all inputs considered. • CO 2 , CH 4 , heavy metals, coal, and water were key contributors to footprint impact. • Improving national energy structure and adopting recovered steam were recommended. [ABSTRACT FROM AUTHOR]

Abstract: Through sampling reed in Shuangtai estuary wetland in April, 2009 and simulation test in Shenyang Agricultural University, we analyze the removal efficiency of Cu, Zn, Pb and Cd during different growth period of reed and distribution of them in various parts of reed. The results show that the removal efficiency is best in jointing stage, the removal of Pb largest with 21% increase and 30% in sprout and exhibition leaf period, the removal of Zn largest with 53% and 29% increase in jointing stage and the maturity period, the removal of Cd largest with 40% increase in the different growing season. The absorption amount of Cu, Zn, Pb and Cd in roots of reed reaches maximum during the growth, followed by in stems and in leaves. Absorptive capacity in the whole plant for Cu, Zn, Pb and Cd exists extremely significant difference (p <0.01). The order is Pb>Zn>Cu>Cd. The absorption in root is higher than in stems and in leaves (p <0.05), but Zn and Cd absorption amount has no significant differences in stems and leaves (p >0.05). [Copyright &y& Elsevier]

Abstract: The pulp and paper industry is one of the most energy-intensive industries worldwide. In 2007, it accounted for 5% of total global industrial energy consumption and 2% of direct industrial carbon dioxide (CO2) emissions. An energy audit is a primary step toward improving energy efficiency at the facility level. This paper describes a plant-wide energy audit aimed at identifying energy conservation and CO2 mitigation opportunities at a paper mill in Guangdong province, China. We describe the energy audit methods, relevant Chinese standards, methods of calculating energy and carbon indicators, baseline energy consumption and CO2 emissions of the audited paper mill, and nine energy-efficiency improvement opportunities identified by the audit. For each of the nine options, we evaluate the energy conservation and associated CO2 mitigation potential. The total technical energy conservation potential for these nine opportunities is 967.8terajoules (TJ), and the total CO2 mitigation potential is equal to 93,453tonnes CO2 annually, representing 14.4% and 14.7%, respectively, of the mill’s total energy consumption and CO2 emissions during the audit period. [Copyright &y& Elsevier]

Recovered paper is one of the major raw material for recycled papermaking industry. In China, the domestic recovered paper recycling system is incomplete and the amount of recyclable recovered paper cannot satisfy the papermaking demand. Therefore, the recycled papermaking industry is extremely dependent on imported recovered paper as their raw fiber source. In 2018, Chinese government announced a ban on unsorted recovered paper and tightened the import quota for recovered paper, which resulted in a dramatic drop in the importing amount of recovered paper. It is an urgent issue to explore alternative production routes that are more economical and environmentally friendly. Herein, life cycle cost assessment is used to compare and analyze the recycled papermaking industry based domestic recovered paper and three alternatives (including straw, imported deinked pulp and imported wood pulp) as the raw materials. The results show that the life cycle cost of domestic recycled paper based recovered papermaking is significantly lower than the other three alternatives, whereas its external cost is higher than that of the production routes based on the imported deinked pulp and imported wood pulp. With the increasing price of the domestic recovered paper, imported deinked pulp is the trend of recycled papermaking industry in China. • Life cycle cost assessment is applied to the recycled paper industry in China. • LCC of four papermaking schemes based on different raw materials were assessed. • LCC for six types of paper products ranges from 924 to 1227 USD/t in 2017. • Imported recovered pulpboard is the best choice of wastepaper material supplement. [ABSTRACT FROM AUTHOR]

To reduce energy use and achieve a low carbon production in pulp and paper industry (PPI), it is essential to improve energy efficiency in pulp and paper production. In this study, the energy savings from the PPI were estimated based on a techno-economic analysis by EAGER tool for PPI at the factory level. The structure and implement procedure were introduced initially. Two typical pulp and paper mills from China were determined to estimate the impact of selected energy efficiency technologies (EETs) on energy savings as the cases in the base year. One Factory (A) only produced paper products (i.e. corrugated paper and Kraft linerboard) while the other Factory (B) also produced market pulp besides sack paper. In totally 22 selected EETs were applied to assess their saving potential in Factory A, and 29 measures were applied in Factory B. The results show that 2290 TJ and 1179 TJ of final energy could be saved annually in Factory A and B, corresponding to reduction of 29.4% and 13.6% total energy consumption respectively for the case factories. The CO 2 reduction potential was 32.3% for Factory A compared with that of 16.6% in Factory B. It suggests that the pulp and paper mills should encouraged to use this method estimating energy saving potential, and improve their energy efficiency with suggested measures in order to reduce energy consumption and related carbon emissions further in the coming years. • Energy savings of pulp and paper production were estimated at the factory level. • A techno-economic evaluation tool was applied to access the energy savings and carbon emission reductions. • Two typical pulp and paper factories from China were investigated to estimate their energy savings in the base year. • It is useful to assess energy savings and select feasible EETs in achieving energy saving and emission reduction targets. [ABSTRACT FROM AUTHOR]

Papermaking is a water intensive industry. The growth of paper demand will further intensify the need of fresh water resources. Papermaking involves complex processing routes. Previous investigations of water consumption in papermaking industry have focused primarily on key processes and pathways, ignoring the impacts of many intermediate and inter-related processes in paper production cycles and there underestimating the sustainability impacts. Herein, the results of a life cycle analysis of water consumption for papermaking industry in China using an extensive system boundary that includes the water embedded in intermediate processing are presented. The results show the life cycle water consumption and water saving potentials for different papermaking pathways. The advocacy of "forest pulp and paper integration" may have few practical contribution to reducing water consumption due to the low indirect water consumption of raw materials and energy for transportation. [ABSTRACT FROM AUTHOR]

Abstract: There has been much debate on the topic of whether stricter environmental regulations can promote environmental performance and economic performance at the same time. Different researchers have used different indicators to measure environmental performance and economic performance in their empirical studies. However, it is a surprise that few studies have checked the relationship between environmental regulation and eco-efficiency, as the latter is widely regarded as a quite powerful tool of considering ecology and economy together. In this study the background is the implementation in 2003 of the Stricter Discharge Standard (SDS) in Shandong Province’s Pulp and Paper Industry (SPPI), compared to the national standards of China. The stricter regulations were intended to promote corporate change from passive management to active control and from end-of-pipe treatment to cleaner production. This study investigated the eco-efficiency trends of SPPI from 2001 to 2008 in three fields: water efficiency, energy efficiency and environment efficiency. A “de-linking” and “re-linking” tool was used to attain a further evaluation. The study showed that with the implementation of stricter regulation most of the efficiency indicators (except CO2 emission and energy consumption) had achieved significant improvements, and the overall environmental performance trends of SPPI showed it to be more sustainable. However, the study also found that it was not enough to address a single indicator in the environmental regulation of the pulp and paper industry. More holistic eco-efficiency indicators need to be further considered and introduced to the industry as the next step to create true sustainable development. [ABSTRACT FROM AUTHOR]

The continuing increase of the popularity of mobile phones generates a large volume of waste mobile phones. The efficient collection of this waste has become a focus and frontier of both academic research and related business. This paper reviews the waste mobile phone collection in Dalian, China. The findings show that several challenges currently impede the implementation of collection, including unsmooth collection channels, poor convenience, and low environmental awareness of residents. A new joint collection mode is put forward to increase the waste mobile phone collection rate. In the mode, the responsibilities of each stakeholder (including the collecting enterprise, the third-party logistics company, the government, and the resident) are clarified. Moreover, a conjoint analysis method is applied to identify residents' willingness for collection. The obtained results show that compensation mode, collection price, and convenience degree are the three factors that influence the prevailing preferences of residents. Collection services with high market share must satisfy the concourse of three conditions. The collection price exceeds 30% of the mobile phone's original price, the compensation mode is cash and information service is provided. These results can provide a reference for the service design of collection mode and the formulation of relevant corporate strategies. • Waste mobile phones are an environmental problem if not handled appropriately. • Collection is the critical bottleneck of waste mobile phones managements. • A new joint collection mode aiming at increasing collection rate was put forward. • Conjoint analysis was applied to investigate residents' willingness for collection. [ABSTRACT FROM AUTHOR]

Abstract: The study reported in this paper tested the hypothesis that the developmental and reproductive health of mosquitofish (Gambusia affinis) exposed to pulp and paper effluent in the Dengcun River would differ from that of mosquitofish living in a reference site. We also studied whether morphological characteristics such as the anal fin and hemal spines of mosquitofish could serve as indicators for evaluating the androgenic effect and mosquitofish population security in the Dengcun River. Male and female mosquitofish were captured at three sites contaminated by pulp and paper effluent in the Dengcun River in Sihui, South China, and at a nearby uncontaminated reference site. Samples were collected from the sampling sites on the same day in August 2009. We compared the populations by total length, wet body and liver mass, gonad mass, and population composition. We also compared the populations according to number of anal fin segments, oocyte and embryo count, anal fin and hemal spine morphology among females, and by sperm count and viability among males, and observed the gonadal and liver histology of both males and females. Female mosquitofish exposed to pulp and paper effluent in the Dengcun River were generally smaller in length and mass, had a greater number of anal fin segments and more embryos, but had significantly fewer oocytes in comparison with those living at the reference site. The higher number of anal fin ray 3 segments and the increased ray 4:6 length ratio observed among fish taken from the Dengcun River sites indicated that they might be subject to the androgenic effect. Furthermore, the significantly different hemal spine morphology of the effluent-affected females also indicated the pulp and paper mills effluents in Dengcun River might contain androgenic substance(s). Male mosquitofish at the sites exposed to effluent had a higher number of anal fin segments and greater testis mass in comparison with those living at the reference site. No evidence of intersex was found in either males or females, although histopathological tests on females revealed histologic abnormalities in the liver and gonads. It can be concluded that pulp and paper effluent contamination in the Dengcun River has affected a number of developmental parameters and reproductive characteristics in mosquitofish, with possible adverse effects on reproduction in this population. [Copyright &y& Elsevier]

As China's ecological environmental problem becomes severe, corporate environmental behavior (CEB) has become the focus of a range of stakeholders, policy makers and the whole society since the operating activities of companies is the main source of environmental pollution. This study used a questionnaire survey and structural equation model (SEM) to examine the relative importance of external and internal pressures (EIP) on driving CEB. Data was obtained from 702 papermaking companies in China. The mechanism of EIP effects on CEB was tested employing SEM through path analysis, using AMOS 21.0. The results showed that government pressure, economic pressure and internal pressure played significant positive roles in environmental behavior of papermaking companies in China. Economic pressure was the most important factor on environmental behaviors (including defensive, accommodative and proactive behaviors) of papermaking companies. Furthermore, the role of internal pressure on CEB (defensive and proactive) was second only to economic pressure, while the role of government pressure on CEB was much weaker than our expectation. However, the role of social pressure, which was imposed by general public and environmental Non-Governmental Organizations (NGOs), was not significant. Thus, policy makers should emphasize on the interactions of economic mechanism, government regulation and internal incentive mechanism to stimulate firms to adopt active environmental behavior. More concerns from the general public shall be addressed to enhance their driving effect on CEB in Chinese papermaking industry. [ABSTRACT FROM AUTHOR]

Boosted by a huge potential market and government funding, China is fast developing compound manufacturing, especially for LED lighting. [Copyright &y& Elsevier]

Nine paddy straw-degrading microbial consortia were isolated from 253 paddy straw samples from northern China and the Yangtze River Valley, which are two major rice production regions in China. The microbial consortia completely degraded filter paper within 15 d at 25 °C. The V4 region of the microbial consortia 16S rRNA gene was amplified, and the amplicons were sequencing using the Illumina Miseq high-throughput platform. Compilobacterota and Bacteroidota were the predominant phyla in the samples. At the genus level, the relative abundance of Macellibacteroides was the highest in Y2, and Arcobacter was predominant in the other samples. Analysis of the microbial community structure revealed that the diversity and richness in samples from the Yangtze River Valley were significantly higher compared with those of the samples from northern China, and the community structure of the four microbial consortia from the northern region had higher similarity than the five consortia from the Yangtze River Valley. • Campilobacterota and Bacteroidetes were the predominant phyla of microbial consortia. • The major genera in the two regions were significantly different. • Pseudomonas , Comamonas , Fibrobacter , Sphingobacterium , Ruminiclostridium , and Ruminococcus are the functional bacteria. • The northern bacterial community richness and diversity were lower than the Yangtze River Valley. • The northern microbial community structure was higher in similarity than the Yangtze River Valley. [ABSTRACT FROM AUTHOR]

Hainan Province has the largest ocean areas in China. After decades of efforts, it has accumulated abundant marine basic data, and has built various types, different topics and large-scale marine databases. The construction of Hainan provincial digital ocean environment parameters 3D visualization system can effectively integrate, utilize and share these marine information resources, and support marine management and marine ecological environment protection. The multi-dimensional dynamic visualization of information can provide scientific and effective tools for comprehensive marine management and macro-decision-making in a timely and accurate manner. This paper introduces a digital ocean environment parameters three-dimensional (3D) visualization system based on digital earth sphere model suitable for marine environment parameters three-dimensional visualization display, studies the key technologies of multi-dimensional marine environment parameters visualization based on basic geographic data and remote sensing images, which integrated high-precision Digital Elevation Model (DEM) and satellite images to realize the three-dimensional integration and visualization of marine environmental parameters in the South China Sea, providing data display, multi-temporal dimension comparison and spatial overlay analysis. The functions of statistics and data management provide interactive information services for integrated marine management and decision-making support. [ABSTRACT FROM AUTHOR]

Solid waste recycling in developing countries has been largely relying on the informal recycling sector which intelligently uses the tacit knowledge within the hierarchical network of labor division to capture the value from the geographically uneven distribution of waste generation and demands on secondary materials. Previous studies on solid waste recycling mainly have a material-centric view on economic value. In this paper, an entropy-weighted recyclability index (EWRI) is developed to quantify the recyclability of Municipal Solid Waste (MSW) in China at the prefectural city level by integrating the road transportation density and regional recycling capability into the categories of waste physical components regarding the cost to deliver the waste from generating sources to the conversion sites for recycling. The result confirms the existence of an east-west gradient regional disparity in recyclability of Municipal Solid Waste (MSW) among cities for the recyclable components. The 339 prefectural cities were classified into 4 grades, namely "best, good, normal, and difficult" for the recyclability of local MSW with guidelines for planning of regional recycling infrastructure, respectively. In conclusion, general guidelines for the building of wise-waste city infrastructure to fit the local context in developing countries is advised. [ABSTRACT FROM AUTHOR]

• A simple, large-scale fabrication of cooling paper via pulping and papermaking technology. • The cooling paper is facilely deconstructed and regenerated to architect the secondary cooler. • The cooling paper features a high solar reflectance of 94% and emissivity of 0.95. • The cooling paper shows the sub-ambient temperature drop of 6 ∼ 8.8 °C under directly solar radiation at daytime. Passive radiative cooling materials provide coldness without energy consumption for all-day thermal comfort by reflecting solar irradiation and emitting heat into the 3 K universe. However, the conventional radiative cooling materials involve complex multilayer structures and unsustainable polymers, showing the non-recyclable disadvantage, which induces resource waste and environmental issues. Herein, we reported a low-cost, scalable, and eco-friendly radiative cooling material (namely cooling paper), consisting of the delignified, fibrillated cellulose fibers and nano-sized hydroxyapatite (HA) via the mature pulping and papermaking process. The resulting cooled paper can be recycled, and it can be easily deconstructed to harvest cellulose fibers and HA, individually. The recovered source materials can be reused to prepare secondary products that show comparable performance to the original cooling paper, including a high solar reflectance of ∼94% and an infrared emissivity of ∼0.95 in the atmospheric transparency window. Such cooling paper enables superior cooling performance with the temperature drop of 6 ∼ 8.8 °C under directly solar radiation. Based on the EnergyPlus simulation, our cooling paper shows a average cooling energy saving of ∼29 % in buildings across China. The recyclable cooling paper with high cooling capability and scalability, as well as environmental friendliness, shows promising potential for sustainable energy-efficient buildings. [ABSTRACT FROM AUTHOR]

Industrial wastewater discharge has become the main cause of water pollution in China. However, the spatial interaction mechanism between industrial structure and water pollution is still unclear. Accordingly, we evaluated and analyzed spatiotemporal changes of the agglomeration pattern of pollution-intensive industrial enterprises and the evolution of the water environmental pollution pattern, as well as the correlation between them. The study results show that the polluting industrial enterprises were located mainly along the Yangtze River and Taihu Lake Basin in southern Jiangsu in 2013 and 2018. However, we observed a spatial trend of pollution transfer to northern Jiangsu. The industrial water pollution discharge presents the distribution pattern of facing rivers, seas, lakes and cities. Papermaking and paper products industry are the leading factors of COD and NH 3 –N pollution, with explanatory power of 0.3666 and 0.6201 respectively. The spatial positive coupling effect between the concentration degree of polluting enterprises and the intensity of water environment pollution discharge is 94.95% of the region. The spatial agglomeration of polluting industrial enterprises is an important cause of water environment pollution. They promote and couple each other, proving the existence of "Pollution haven" and "Porter hypothesis". [Display omitted] • The polluting industrial enterprises are located mainly along the Yangtze River and Taihu Lake Basin. • Papermaking and paper products industry are the leading factors of COD and NH 3 –N pollution. • The spatial agglomeration of polluting industrial enterprises is a significant cause of water environment pollution. • This study proves the existence of "Pollution haven" and "Porter hypothesis". • This study fills the gap in the spatial response mechanisms of different industrial structures and pollutants. [ABSTRACT FROM AUTHOR]

The current approaches to study the coupling mechanism between economy and environment seem to fall into self-circulation, failed to reveal "economy–environment interdependence". In this context, an exogenous variable is introduced into these models for better understanding the relationship. Benzo[a]pyrene (Bap) environment inventories in different cities in China were estimated by fugacity model based on Bap concentration data collected from previous studies. An extended model, stochastic impacts by regression on population, affluence and technology (STIRPAT), generated from original IPAT (a model that expresses the idea that environmental impact (I) is the product of three factors: population (P), affluence (A) and technology (T)) was used to study the relationship between Bap environment inventory and anthropogenic factors including population, vehicle amount, affluence and energy consumption. A ridge regression has been applied to optimize the model parameters. Overall, there exist good relationships between Bap inventories and economic factors. Specifically, population and affluence are the most significant factors that influence Bap inventory. Rise of the scale of population and vehicle amount increases the Bap inventory, as growth of GDP per capita and the efficiency of energy utilization have inhibitory effect on Bap inventory. Apparently, the influences of anthropogenic factors on Bap inventory are different between north and south China. Bap inventory in north China is more sensitive to the change of population and energy consumption, while is highly correlated to GDP per capita in south China. Further, according to social-economic development prediction, with assist of the result from STIRPAT model, we find out that Bap inventory drop 31% from 2001 to 2020 in China. Our estimates are comparable with the published data and confirmed that Bap can be regarded as a chemical indicator of social-economic development in China. Image 1 • An extended STIRPAT model derived from original IPAT was developed. • Population and affluence are the key factors that influence Bap inventory. • Advance of affluence and technology level curbs Bap environmental exposure. • We predict Bap environmental inventory drop 31% from 2001 to 2020 in China. • Bap can be used as an indicator of social-economic development in China. [ABSTRACT FROM AUTHOR]

Urbanization and the release of carbon emission are two significant features of contemporary economic and social progress in China. However, there are few studies that consider how urbanization policy goals affect carbon emission. This paper aims to study the nonlinear effects of urbanization policy goals on carbon emission in 13 cities of the Beijing-Tianjin-Hebei region. In this paper, a multi-dimensional spatial disturbance grey model is proposed. Based on matrix perturbation theory, this paper explores the spatial perturbation bounds of the novel model and verifies that the spatial property of the model is consistent with the viewpoint of the First Law of Geography. Then, the novel model is used to predict the urban carbon emission under different urbanization policy goal scenarios. The results showed that the novel model has spatial regional correlation in spatial region prediction. With the development of urbanization level, carbon emissions show a downward trend in more than 50% of cities from 2022 to 2025. In addition, the improvement of urbanization policy goals will promote the carbon peak time of most cities. The carbon emission intensity will exhibit an inverted U-shaped trend distribution in space. The research results are conducive to providing scientific guidance for the formulation of new-type urbanization policies and helping to achieve the dual carbon goals. • A multi-dimensional spatial disturbance grey model is proposed. • The novel grey model is consistent with the viewpoint of the First Law of Geography. • The spatial distribution of carbon intensity showed an inverted U-shaped pattern. [ABSTRACT FROM AUTHOR]

Semi-natural habitats (SNHs) surrounding agricultural fields contribute significantly to biodiversity in agricultural landscapes. SNHs can be divided into large habitat patches such as contiguous patches of forests, and smaller, interspersed linear habitat types such as grassy field margins. Traditional small-holder agricultural farmlands in China, replete with rich linear habitats, are notably beneficial for biodiversity. However, as these farmlands undergo consolidation to enhance the efficiency of machinery, linear habitats are being removed, a process that could adversely affect biodiversity. Appropriate agri-environmental measures (AEM), such as the restoration of field margins via strategic planting, could serve as an effective countermeasure to maintain biodiversity in consolidated land. This paper discusses how biodiversity monitoring can aid in evaluating the impact of land consolidation and the efficacy of AEM in China, from species richness and species composition perspectives. The paper also discusses the function of linear habitats and how they interact with large habitat patches in promoting biodiversity, while noting that outcomes are likely to vary among taxa. Long-term, multiple-taxa and comprehensive assessments are recommended in further studies, and a collaborative approach that involves multiple stakeholders is essential to ensure a success implication of AEM in China. [ABSTRACT FROM AUTHOR]

The ever-increasing challenges related to water security and climate mitigation underscore the pressing need for forward-thinking systems planning tools to drive urban sustainability transitions. In this study, we propose a novel city-level multi-objective planning framework that explores the nexus between carbon trading and water management, with the aim of facilitating water-efficient urban industrial restructuring. The framework integrates cap-and-trade mechanisms into a two-layered optimization model, creating an integrated approach to optimizing carbon emissions and generating economic opportunities for improving water efficiency. To illustrate the potential application of this framework, we conducted a case study focusing on Dongguan City, a water-stressed industrial metropolis in southern China. The results illustrate potential synergies between water planning strategies and carbon trading schemes, which could be harnessed to enable targeted reductions in water usage and carbon emissions. Furthermore, our findings identify the textile, apparel, and paper products manufacturing industries as primary candidates for strategic production scale reduction, emphasizing the importance of sustained support for the development of the computer and electronic manufacturing sector as a catalyst for urban sustainability transitions. By pioneering this new nexus-based perspective, our study offers valuable insights into long-term strategic planning for a low-carbon and resource-efficient urban economy. • Synergizing carbon trading and water management within a novel integrated planning framework. • Implementing resource-efficiency-driven optimization for water- and carbon-intensive manufacturing sectors. • Gaining insights into the specific roles of key manufacturing sectors in water management and carbon trading. • Introducing carbon trading systems may help in promoting water-efficient industrial restructuring. [Display omitted] [ABSTRACT FROM AUTHOR]

Abstract: Scientific assessment of the health of wetland ecosystem is an important prerequisite for wetland management and protection. The Zoige wetland ecosystem is a cold peat wetland ecosystem on the eastern edge of the Tibetan Plateau in southwest China. By measuring organic matter and nutrients from soil samples in the Zoige wetland, we found that there were connections between organic matter in soil and vegetation growth, since decomposition of soil organic matter was an important source of soil nutrients and was influenced by the soil water content of the wetland. We therefore integrated a cluster of geochemical indicators of soil, including organic matter content, total nitrogen, total phosphorus content, total potassium content and humic acid yield, into a conceptual framework for ecosystem health assessment, therefore improving the existing indicator system for the Zoige wetland. We analyzed levels of organic matters and nutriment elements in soil samples from the Zoige wetland simultaneously with other indicators of the assessment system. Compared with the previous assessment work for Zoige wetland, the proposed assessment system showed a more holistic result. [Copyright &y& Elsevier]

In order to help control the spread of space debris and junk, deorbit sail devices have been used for deorbiting techniques; however, this approach is still considered risky due to potential failure or malfunction as it need to be exposed to the harsh space environment for a prolonged period of time, particularly in low-Earth orbit. China has made new strides forward in managing space junk, as it has successfully unfolded a 25-square-meter deorbit sail developed by the Shanghai Academy of Spacecraft Technology in-orbit for the payload capsule of a recently launched rocket. Accordingly in this paper, a full life-cycle modelling based on Monte Carlo method is developed to reveal the damage behavior of the 25-square-meter deorbit sail surface under the combined effects of atomic oxygen erosion and deorbit sail defects. The simulation results show that as the atomic oxygen fluence increases and the material defect width widens, the interaction effect of the two factors becomes more and more pronounced, which decisively influences the erosion rate of the sail surface. Morphological characterization of aluminized film PET material, activated silanisation modified material and plasma-polymerization coating material before and after atomic oxygen erosion combined defects is carried out and the atomic oxygen erosion of the deorbit sail surfaces is quantitatively assessed. The assessment results show that compared to the PET material and activation silanisation surface modification material, the plasma polymeric coated material showed much better flexibility, folding resistance and irradiation resistance to prevent geological fold and to shield from the atomic oxygen erosion in space. The atomic oxygen erosion combined defects assessment method studied in this paper provides valuable reference data for the subsequent serialisation of deorbit sail products and other typical lightweight film materials for space applications. • Introduction of Monte Carlo method for material surface damage simulation analysis. • Compare the performance of off-orbit sail surface materials under different protection treatments. • Standardize the process of space flexible film material performance evaluation system. [ABSTRACT FROM AUTHOR]

The total electron content (TEC) of the ionosphere is an important parameter to describe the ionosphere, and it is a great significance to monitor and predict it accurately. In this paper, a hybrid ionospheric TEC prediction model based on the least squares support vector machine (LSSVM) and the Moth-Flame Optimization (MFO) algorithm is proposed. The parameters of the LSSVM model are optimized by the MFO algorithm. We use observation data of 15 GNSS stations from the Crustal Movement Observation Network of China (CMONOC) to extract ionospheric TEC from 2012 to 2019. The ionospheric TEC is forecasted using solar and geomagnetic activity indices in both the low solar activity year (2019) and the high solar activity year (2015). The results show that the prediction performance of the MFO_LSSVM model is significantly better than that of the IRI model, SVM model, and LSSVM model. Compared with the other three models, there are more stable prediction results in the low and high solar activity years. At the same time, the predicted value of the MFO_LSSVM model has a good correlation with the measured value, and it also has good prediction potential in areas with active geomagnetic activity. The comparison with the Long Short-Term Memory (LSTM) model shows that the MFO_LSSVM model has better performance than the single LSTM model. In conclusion, the MFO_LSSVM model can accurately predict ionospheric TEC in China, and has better accuracy than traditional long-term and short-term models. [ABSTRACT FROM AUTHOR]

High precision ionospheric Total Electron Content(TEC) prediction is of great significance for improving the accuracy of Global Navigation Satellite System(GNSS), preventing natural disasters, and ensuring wireless communication. Given the varying frequencies of TEC signals, a hybrid CEEMDAN-BiLSTM-PSO-LSSVM-FE model for predicting ionospheric TEC content is proposed in this paper. Firstly, complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) is used to decompose the extracted hourly TEC sequence and calculate the fuzzy entropy (FE) of the subsequences. Then, the signal is divided into high-frequency and low-frequency parts based on the fuzzy entropy value, for the high-frequency component, Bidirectional Long Short-Term Memory network (BiLSTM) is used for prediction; for the low-frequency component, Particle Swarm Optimization-based Least Squares Support Vector Machine (PSO-LSSVM) is used for prediction. The hourly TEC values collected from six evenly distributed GPS stations in China are used as the main input variable for the proposed model, with solar and geomagnetic activity data used as auxiliary data, using the TEC data from the previous 48 h to forecast the TEC content for the next hour. The performance of the model is evaluated by comparing it with other models under different geographical locations, seasons, solar and geomagnetic activity conditions. Experimental results show that the proposed hybrid model outperforms other models, with a correlation coefficient R2 and root mean square error (RMSE) of 0.99 and 0.20 TECU, respectively. The model effectively overcomes the problem of low TEC prediction accuracy and can provide more precise ionospheric delay correction services. [ABSTRACT FROM AUTHOR]

The mechanism of the environmental regulations affecting carbon emissions is complex, and for many years it has been a hot research topic for researchers. However, few of the previous studies have focused on whether or not environmental regulations can potentially influence carbon emissions through technical efficiency. Therefore, the present study chose to investigate the mediation effects of the technical efficiencies between environmental regulations and carbon emissions using the provincial panel data of energy-intensive industries for the period ranging from 2005 to 2015. The results were as follows: (i) In regard to the entire group of energy-intensive industries, it was found that environmental regulations could not only potentially directly reduce carbon emissions, but also indirectly reduce carbon emissions through technical efficiency. In other words, technical efficiency had played a partial mediation role between the environmental regulations and the carbon emissions; (ii) It was observed that for the different subdivided energy-intensive industries, the different levels of technical efficiency had shown various mediation effects. For example, the mediation effects of technical efficiency in the petroleum processing and coking (PPC) industry; papermaking and paper products (PPP) industry, and raw chemical materials and chemical products (RCMCP) industry, were found to be similar to those of the whole energy-intensive industries. Furthermore, the "Porter Hypothesis" had been verified in the nonmetal mineral products (NMP) industry. However, there were no mediation effects observed in the smelting and pressing of ferrous metals (SPFM) and smelting and pressing of nonferrous metals (SPNM) industries; (iii) In this study, in accordance with the regression results of the double-threshold models, it was found that for the energy-intensive industries as a whole, the carbon emission reduction effects of environmental regulations had become stronger with the increases in technical efficiency. For the PPP and RCMCP industries, there was an inverted U-shaped relationship observed between environmental regulations and carbon emissions when the technical efficiency was taken as the threshold variable. Therefore, based on the research conclusions achieved in this study, some policy recommendations were put forward. • Environmental regulation reduces carbon emission of the energy intensive industries of China. • Technical efficiency plays a partial mediation effect between environmental regulation and carbon emission. • The mediation effects of technical efficiency differ in the subdivided energy-intensive industries. • The "Porter hypothesis" is verified in Nonmetal Mineral Products (NMP) industry. [ABSTRACT FROM AUTHOR]

Highlights • Forest resource Metabolism Network model isdeveloped for ecological and economic analysis. • Exploitation index is developed to reveal the weaker sectors in the ecological relations. • A case study of Guangdong province, China isconducted to illustrate the potential benefits. • Scientific Basis are provided to allocate forestresources and stabilize industrial structure. Abstract Integrating forest resources into the socio-economic system correctly and reasonably is of vital importance to tackle the increasingly scarce forest resources. In this paper, forest resource input-output model and forest resource metabolism network model are established to provide new insights into the relationships among the systems, industries and sectors related to forest resources. A promising indicator named exploitation index is developed to reveal the weaker sectors in the ecological relations, which will further help to provide better corrective actions and integrated strategic measures. Guangdong is taken as an example to verify the availability of the model and solve the problem. The results show that the primary manufacturing consumes more direct timber, while advanced manufacturing and the service sector utilize timber indirectly. In addition, Guangdong forest metabolism system shows a negative correlation and the whole network does not achieve the mutualism state, leading to competition relationships between pairwise sectors that should not appear, such as Forestry sector and Papermaking and Paper Products sector. These results provide the corresponding reference for helping the decision makers to allocate forest resources and coordinate ecological and economic development. [ABSTRACT FROM AUTHOR]

The inconvenience of travel, air pollution and consequent economic losses caused by traffic congestion have seriously restricted the healthy and sustainable development of cities in China. In this context, as the main component of current and future urban traffic management measures, intelligent transportation system is an important means to improve the traffic efficiency of road network and alleviate urban traffic congestion. Traffic flow prediction plays an important role in this connection. In this paper, an ensemble short-term traffic flow prediction method based on optimized variational mode decomposition (OVMD) and combined long short-term memory network (LSTM) is proposed. The method consists of three main components: 1. Use the improved bat algorithm to optimize the parameters of VMD to achieve better decomposition effect; 2. Use the optimized variational mode decomposition algorithm (OVMD) to decompose the unstable original traffic flow time series data into relatively stable multiple Intrinsic Mode Functions (IMFs); 3. The optimized L-BILSTM model is established by combining the basic long short-term memory network with the bidirectional long short-term memory network. It can better extract information from traffic flow data and improve the accuracy of prediction results. In the empirical study part, the traffic flow data of Changsha City is used to verify the prediction model proposed in this paper. The influence of the application of the variational mode decomposition algorithm to the training set data and the overall data on the final prediction results is also compared and analysed. [ABSTRACT FROM AUTHOR]

According to the demand of sports athletes' scientific training, combined with data mining technology, a set of sports training model which is suitable for China's national conditions and has a higher level of scientific research is established. Starting from the data mining technology, this paper expounds its connotation and several common methods in detail. Based on the demand of sports training, this paper studies the quality control of sports training and the statistical system of tactical combat. On this basis, an improved output method of Aprilio algorithm is introduced to enhance the correctness of systematic evaluation. On this basis, three algorithms, classic, DC-Apriori and modified Apriori, are simulated and compared. The results show that the improved Apriori algorithm studied in this project can provide better decision support for the training model. [ABSTRACT FROM AUTHOR]

The operation and maintenance expenses of power transmission and transformation projects, as a significant power supply carrier of the nation, continue to rise as a result of the sustained and quick expansion of China's social economy and the quick growth of the country's power demand. Power grid businesses are under a lot of market pressure. To increase the level of lean management of the operation and maintenance costs of power transmission and transformation projects, power grid enterprises must significantly enhance their capacity to estimate the operation and maintenance costs of their organizations in advance. Machine learning algorithms are gradually applied to the operation and maintenance cost prediction of power transmission and transformation projects of power grid enterprises as a result of the ongoing development of big data technology, effectively increasing the accuracy of operation and maintenance cost prediction. In this paper, by analyzing the variables affecting the differential operation and maintenance cost of power transmission and transformation projects, a scientific and reasonable investment analysis model for the differential operation and maintenance cost of power transmission and transformation projects is constructed using the stochastic forest algorithm of particle swarm optimization, and the variables affecting the differential operation and maintenance cost of substations and transmission lines are obtained, which proves that the trend of the prediction model in this paper is more consistent with the actual situation. [ABSTRACT FROM AUTHOR]

Research background: With the rapid development of civil engineering, the traditional low rise building model can no longer meet the needs of urbanization, and high-rise building structure has become the future development direction. In recent years, earthquake disasters occur frequently in China, which has caused huge losses to high-rise buildings. Therefore, we must strengthen the relevant research of high-rise building structures, which can make the high-rise building structural columns meet the requirements of safety performance. Therefore, the health detection and seismic performance evaluation of high-rise buildings will be of great significance. Research method: Through static elastic-plastic evaluation, we can calculate the dissipated strain energy of the structural column, which will further obtain the damage index of the structural column and obtain relevant data. Through this calculation method, we can complete the seismic performance evaluation of high-rise buildings, which is a calculation mode different from the traditional finite element software analysis. Through static elastic-plastic analysis, the seismic performance evaluation of high-rise buildings will have higher accuracy, which will build a damage index. Therefore, this paper uses a variety of research methods, mainly literature survey and empirical analysis. Through literature analysis, this paper can fully and correctly understand the methods of health detection and seismic performance evaluation of high-rise building structures at home and abroad, which will further clarify the current research level at home and abroad. Through empirical research, this paper analyzes specific examples, which can obtain more accurate results. Conclusion: In this paper, the seismic performance of high-rise buildings is comprehensively evaluated according to the damage index value of building structural columns. The simulation results show that more ideal seismic evaluation results can be obtained. [ABSTRACT FROM AUTHOR]

• Variable stiffness design for a 3-legged asteroid probe. • Landing dynamics for soft landing on the 2016HO3 asteroid is modeled. • Response surface surrogate model is established for optimization. • Variable stiffness leg and pressing force are optimized. China plans to launch a probe to detect and sampling on the near-Earth asteroid 2016HO3 around 2025. In view of this, this paper discusses an alternative landing strategy with passive variable stiffness landing gears, which help to land the probe stably on the asteroid for sufficient sampling time. First, a three-legged lander is introduced, following which, a four-bar-linkage-based variable stiffness leg is designed considering the design constraint of landing clearance. Then, a numerical model of the probe for landing simulation is established. Moreover, a surrogate model is obtained using the second-order response surface method (RSM) to improve computational efficiency. Based on the surrogate, the variable stiffness leg and the pressing force are optimized to reduce the impact forces at touchdown and the landing time. Finally, the optimal solution is validated using the dynamics analysis model. [ABSTRACT FROM AUTHOR]

In contrast to the rising technological applications of China's satellite systems, their applications and impacts in modern Chinese Society, particularly in the legal and administrative forums, have largely escaped under the radar. Specifically, the use of satellite outputs can now be found within a number of administrative and legal activities within China - including policy and rule-making, administrative investigations, and the production of court evidence. At the same time however, outdated legal practices, ambiguous status, and lack of guidance has prevented China's legal system from fully capitalizing on the advantages of satellite technologies. Therefore, to fill these legislative gaps, this review provides a comprehensive overview on the applications of satellite technologies within China's legal system, and provide important insights as to their current developments, legal framework, and legal issues. Additionally, having identified the aforementioned issues, this paper offers policy recommendations for the purposes of legislation. • Satellite applications in China's policy and rule-making processes. • Investigatory applications of satellite technologies within China's administrative organs. • Emerging evidentiary applications of satellite technologies in Chinese court systems. [ABSTRACT FROM AUTHOR]

With large volume of passengers boarding and alighting through subway platforms, the stations are getting crowded, resulting in drops in the level of service and safety concerns, especially for subway systems operating at capacity during peak hours. Thus, it is crucial for subway agencies to sense changes in travel demand and adjust their management schemes accordingly. In this paper we propose a statistical approach to estimate dynamic passenger flows with automated data. First, we develop a dynamic logistic model for calculating passenger tap-out times, which can be employed to infer passenger flow characteristics at the aggregate level. In addition, a new passenger-to-train assignment model for any subway route is derived based on the dynamic model. Subsequently, we apply an expectation-maximization algorithm to estimate the model parameters with automated fare collection and automated vehicle location data. Finally, a cross-validation method is employed to validate our approach with data obtained from several routes in Beijing subway system in China. Results of 95% prediction intervals indicate the effectiveness of the models and the proposed estimation methods. • Propose a dynamic logistic model for inferring and predicting subway passenger tap-out times. • Apply an expectation-maximization algorithm for model parameters estimation. • Develop a novel passenger-to-train assignment strategy. • No prior distributions of parameters or additional information required in the proposed methods. • Results show good effectiveness of the models and acceptable accuracy of the prediction methods. [ABSTRACT FROM AUTHOR]

• The model for multiple horizontal wells considers heterogeneous fracture network. • The number of frac hits is determined by pressure differentials and derivatives. • Higher conductivity promotes inter-well pressure equilibrium. • Lower conductivity is beneficial to extended interference testing. Frac hits can significantly impact the final development results. Therefore, accurately and quickly understanding the frac-hit interference between wells is crucial for efficient development. At present, traditional pressure/production data analysis methods and numerical simulation methods can characterize the frac-hit interference. However, challenges such as quantitatively assess interference, high uncertainty in modeling parameters and computational time still exist. A quantitative evaluation method for the interference between wells with complex fracture networks has not been reported yet. This paper takes shale oil reservoir with three production wells as an example and establishes a semi-analytical model (frac-hit semi-analytical model, FSM) based on the linear flow characteristics. The model accurately characterizes the non-uniform distribution of complex fracture networks in the stimulated reservoir volume by introducing fractal theory. A quantitative evaluation index, interference coefficient, is defined to assess the interference. The coupled flow model is applied to evaluate the effects of interference in three typical wells in a continental shale oil field in China. We can see from the actual data fitting of the FSM model that the interference coefficients between target well A and adjacent wells B and C are 0.1 and 0.05, respectively, which means there are about 8–10 and 3–5 frac hits, respectively. Comprehensive analysis for the effects of interference shows that the current inter-well interference is beneficial for production in low-pressure areas but detrimental to new well production. Based on this, sensitivity analysis is generated to illustrate the relationship between the conductivity of combined fractures arising from hits and the interference coefficient. As the interference increases, the propagation of inter-well pressure accelerates, significantly reducing the time required for inter-well pressure equilibrium. The research findings have important guiding implications for the quantitative evaluation of inter-well interference in field operations of horizontal shale oil and gas wells and optimization of fracturing operations. [ABSTRACT FROM AUTHOR]

Satellite Laser Ranging (SLR) technology is one of the main technologies in the field of space geodesy, it has played an extremely important role in laser ranging data application and research. As a commonly used geodynamic satellites, the main contribution of LAGEOS and LAGEOS-2 is the solution of orbit determination and station coordinates. At present, there are 8 analysis centers of the International Laser Ranging Service (ILRS) to release the precise orbit products for the two LAGEOS satellites. However, there is currently no relevant research on the analysis of the consistency of these orbits. So, the authors would evaluate the accuracies of them, and the results show that the orbital accuracies of the two LAGEOS satellites are 3 ∼ 5 cm. SLR is regarded as one of the important input data of the International Terrestrial Reference Frame (ITRF), the analysis center of ILRS provides weekly solutions of station coordinates for ITRF. But, due to the limitation of SLR observation conditions, for example most observations of Chinese SLR stations can be made at night, and laser ranging test cannot be conducted in rainy days, the orbit solution of the seven-day arc may have the problem of less data. Therefore, this paper proposed a method for computing the station coordinates based on long arc orbit determination, and we developed the LAODGEO software (Long Arc Orbit Determination Software for Geodynamic Satellite), which is used to solve the orbits of two LAGEOS satellites and station coordinates of five SLR stations in China. The results show that the obtained orbital precision is basically superior to 3.70 cm, and the 3DRMS values between station coordinates solved by us and the coordinates published by SLRF2014 are mostly smaller than 0.013 m, which is consistent with research results domestic and overseas. [ABSTRACT FROM AUTHOR]

Digital remote care has emerged as a transformative approach in the delivery of healthcare services. This paper presents an empirical case study that investigates the utilization of digital remote care for postoperative rehabilitation in a relatively large-scale implementation in China. To gather the empirical data, we employed a mixed-methods approach including observations, document analysis, semi-structured interviews, and a participatory workshop. The findings obtained from these diverse sources were documented and analyzed through journey mapping, which provides a holistic view of the process of delivering digital remote care services. Drawing from the journey map, we gain insights into the specific problems faced by health professionals and use this knowledge to identify areas for improvement. Simultaneously, we recognize opportunities to enhance the overall digital remote care experience and facilitate a successful large-scale implementation. [ABSTRACT FROM AUTHOR]

Many studies have investigated the spatial variations of the ionosphere, but the quantitative characteristics of the ionosphere are rarely reported. In this paper, we utilize the total electron content (TEC) data to evaluate the latitudinal gradient of the ionosphere within 10°-50° N over the China sector. It is found that the magnitudes of latitudinal gradient are significantly higher within 10°-40° N and 45°-50° N, respectively. The database of TEC from 1 November 2018 to 31 October 2022 is processed to figure out the local time, seasonal, and solar activity dependency of the latitudinal gradient. The results suggest that the gradient within 10°-40° N is higher in the daytime and during high solar activity period. They are more noticeable in the spring and autumn, and least visible in the summer. Conversely, the gradient within 45°-50° N strengthens in the nighttime and under lower solar activity, and has larger values in the summer months. Furthermore, the International Reference Ionosphere (IRI-2020) model is assessed in terms of the reproducibility of latitudinal gradient. The IRI-2020 basically represents the latitudinal gradient within 10°-40° N, whereas it overestimates the gradient in the low solar activity period and misses the gradient features near 45°–50° N. [ABSTRACT FROM AUTHOR]

China's offshore wind power (OWP) has become an important part of China's energy strategy and marine strategy, so studying the output characteristic curve of offshore wind power is of great significance for the development of offshore wind power. In this paper, a Gaussian Mixture Model (GMM) based on QAIC (Quasi-AIC, Akaike Information Criterion) was proposed. The original output curve of offshore wind power was classified and the characteristic curve was extracted. The characteristic curve of offshore wind power which can reflect the characteristics of different wind areas is obtained. At last, taking the actual wind power in Coastal Jiangsu Province as the research object, the results of this clustering model and the Gaussian Mixture Model (GMM) based on BIC (Bayesian Information Criterion) are compared via the CH score (Calinski Harabasz Score) to evaluate the effect of this clustering model for the intention of verifying the effectiveness of the method in this paper. [ABSTRACT FROM AUTHOR]

Government protected areas are the most dominant governance type in the global network of protected areas, but in recent years, a lack of research compared to indigenous and private nongovernment protected areas has become evident. Consequently, community-inclusive conservation strategies consistent with the advantages of government protected areas are unclarified. Focusing on 49 households living at the Mount Huangshan World Natural Heritage Site in eastern China, this paper uses qualitative research triangulation to explain the causality between community exclusion and local distrust of the protected area and builds an explanation concerning the political and economic context. The questionnaire data analysed from the configuration perspective were corroborated with interviews and archival data, presenting innovative and enlightening findings. Lack of participation alone does not elicit local protests against biohabitat conservation, and government performance determines the trustworthiness of the government protected area. When local households are unaware of the government's efforts, a "trust paradox" in which the households that receive economic gains distrust government PAs emerges. This is caused by the social expectations of the "responsible government" and the survivorship bias of the households who manage to succeed in profiting. Induced or mandatory community participation is needed to strengthen the indigenous perception of the link between local development and government performance. This paper proposes a new strategy for socioecological goals that is consistent with the advantages of government protected areas, the most globally dominant governance type for protected areas and the type employed by the largest number of countries. • Underparticipation alone does not elicit local protest against biohabitat conservation of government PA. • Good government performance is a sufficient condition for the trustworthiness of government PA. • The "trust paradox" in which the benefited households distrust PA is due to the social expectation and survivorship bias. • Induced or mandatory participation generates trust in PA if community is broadly consulted on economic and social areas. [ABSTRACT FROM AUTHOR]

The high-quality development of national high-tech zones is a matter of great concern for both the government and scholars as it serves as an important base for realizing scientific and technological innovation and industrialization of achievements. This paper constructs a conceptual model of the national high-tech zone innovation system by breaking it down into two subsystems: the innovation R&D subsystem and the innovation incubation subsystem. Through the use of a two-phase Data Envelopment Analysis (DEA) model, the innovation efficiency of each subsystem is measured for the 42 national high-tech zones in Beijing-Tianjin-Hebei, Yangtze River Delta, and Pearl River Delta urban agglomerations. The research conclusion indicates that the majority of the high-tech zones in China are high in both research and development (R&D) efficiency and achievement conversion rate, indicating generally high overall innovation efficiency. However, there is a gap between the three urban agglomerations in terms of innovation resources and transformation environment, with Beijing-Tianjin-Hebei High-tech Zone having low transformation efficiency, and some areas of Yangtze River Delta and Pearl River Delta having low efficiency in technology R&D. Furthermore, the study finds that the innovation modes and paths of high-tech zones within urban agglomerations are quite different in the process of coordinated development of innovation. Therefore, the paper proposes two innovative development paths: the endogenous growth path and the exogenous driving path. The research results provide a tool for more objective evaluation of the innovation efficiency of national high-tech zones in different urban agglomerations in China, and provide a decision-making basis for different regions to implement corresponding innovative development paths. [ABSTRACT FROM AUTHOR]