Search

The aim of the study is to assess the efficacy and advantages of utilizing state-of-the-art three-dimensional (3D) reconstruction technology in preoperative planning for rhinoplasty surgery. It is a study of a single rhinoplasty case that was operated at a tertiary hospital. The patient was assessed through a detailed history, blood investigations, radiological investigations and preoperative 3D (three-dimensional) reconstruction of the face and nose. The study utilized high-resolution CT scans and 3D reconstruction software like 3D (three-dimensional) Slicer and Blender 3D (three-dimensional) to analyze nasal anatomy for preoperative planning in rhinoplasty. External and internal nasal measurements were taken, and axial cross-section analysis was conducted to assess nasal structure deviation. The benefits of 3D (three-dimensional) visualization in surgical planning were evaluated, and surgical management was based on preoperative reconstructions. Comprehensive preoperative evaluations were performed, adhering to ethical guidelines. Preoperative 3D (three-dimensional) reconstruction planning methods facilitated precise surgical planning and execution in rhinoplasty with satisfactory outcomes for both the patient and the surgeon. Incorporating 3D (three-dimensional) reconstruction technology in rhinoplasty preoperative planning enhances surgical precision and patient satisfaction, ensuring optimized surgical outcomes while adhering to ethical standards. [ABSTRACT FROM AUTHOR]

An ultrathin seal serves as a preventive maintenance technology. The design method predominantly relies on engineering experience and lacks a theoretical foundation. In order to investigate the impact of aggregate size, spreading mass, and original pavement texture depth on the formation of an ultrathin seal, a compaction model was developed using the discrete element method (DEM). Different aggregate sizes and spreading masses were analyzed to examine the particle structure and thickness. The three-dimensional (3D) Weierstrass–Mandelbrot (WM) function was used to reconstruct random rough surfaces to assess the effect of the original pavement texture depth (1, 2, 3, and 4 mm) on voids and dosage of filling asphalt. Results showed that the dynamic compaction led to a rapid increase in collision velocity and then declined sharply by 0.02 s, eventually reaching zero by 0.3 s. Particle contacts steadily increased to 365 by 0.3 s and kept stable after the plateau, indicating the formation of an interlocking structure. Coordination numbers and contact vectors varied with particle size and spreading mass, which were more pronounced for small particles. However, the smaller particles (<4.5 mm) had negligible compaction effects, suggesting that the optimal aggregate size should be 3–5 mm. Excessive spreading mass resulted in a multilayered structure incompatible with the single thickness requirement and the recommended range was 9–12 kg/m2. Furthermore, greater texture depth led to higher void content at the bottom of the seal, requiring more filling asphalt. Therefore, when designing asphalt dosage, both the compaction and the variation in voids due to the original pavement texture depth should be considered to ensure sufficient contacts. [ABSTRACT FROM AUTHOR]

Elbow computerized tomography (CT) scans have been widely applied for describing elbow morphology. To enhance the objectivity and efficiency of clinical diagnosis, an automatic method to recognize, segment, and reconstruct elbow joint bones is proposed in this study. The method involves three steps: initially, the humerus, ulna, and radius are automatically recognized based on the anatomical features of the elbow joint, and the prompt boxes are generated. Subsequently, elbow MedSAM is obtained through transfer learning, which accurately segments the CT images by integrating the prompt boxes. After that, hole-filling and object reclassification steps are executed to refine the mask. Finally, three-dimensional (3D) reconstruction is conducted seamlessly using the marching cube algorithm. To validate the reliability and accuracy of the method, the images were compared to the masks labeled by senior surgeons. Quantitative evaluation of segmentation results revealed median intersection over union (IoU) values of 0.963, 0.959, and 0.950 for the humerus, ulna, and radius, respectively. Additionally, the reconstructed surface errors were measured at 1.127, 1.523, and 2.062 mm, respectively. Consequently, the automatic elbow reconstruction method demonstrates promising capabilities in clinical diagnosis, preoperative planning, and intraoperative navigation for elbow joint diseases. [ABSTRACT FROM AUTHOR]

The process of air filtration involves the removal of rigid particulates for example dust, pollen, mold, and bacteria from the air. Air cleaners and HVAC (heating, ventilation air conditioning) filters can reduce indoor air pollution; however, frequent maintenance and the replacement of filter media is necessary as per the surrounding atmosphere. HAVC uses nonwoven fabric as its main air filtration media since it provides multiple functions when used in the sub-micron aerosol range. The industry admires advanced ideas, fibers, and filtration media to meet the market demands. The textile nonwoven filtration media having higher efficiency, narrower pore-size distribution, and/or higher dirt-holding capacity are attracting clients' attention. The performance of fabric filters is measured after they are manufactured in the industry. In addition to traditional assessment methods, a quick assessment of such filter media using image processing and computer vision-based approaches is possible. This paper discusses such efforts here. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the growth of the epiphyseal plate in patients with trochlea dysplasia using a 3D computed tomography (CT)-based reconstruction of the bony structure of the distal femur. The epiphysis plate was divided into a medial part and a lateral part to compare their differences in patients with trochlear dysplasia. Methods: This retrospective study included 50 patients with trochlea dysplasia in the study group and 50 age- and sex-matched patients in the control group. Based on the CT images, MIMICS was used to reconstruct the bony structure of the distal femur. Measurements included the surface area and volume of the growth plate (both medial and lateral), the surface area and capacity of the proximal trochlea, trochlea-physis distance (TPD) (both medial and lateral), and height of the medial and lateral condyle. Results: The surface area of the medial epiphyseal plate (1339.8 ± 202.4 mm2 vs. 1596.6 ± 171.8 mm2), medial TPD (4.9 ± 2.8 mm vs. 10.6 ± 3.0 mm), height of the medial condyle (1.1 ± 2.5 mm vs. 4.9 ± 1.3 mm), and capacity of the proximal trochlear groove (821.7 ± 230.9 mm3 vs. 1520.0 ± 498.0 mm3) was significantly smaller in the study group than in the control group. A significant positive correlation was found among the area of the medial epiphyseal plate, the medial TPD, the height of the medial condyle and the capacity of the proximal trochlear groove (r = 0.502–0.638). Conclusion: The medial epiphyseal plate was dysplastic in patients with trochlea dysplasia. There is a significant positive correlation between the surface area of the medial epiphyseal plate, medial TPD, height of the medial condyle and capacity of the proximal trochlear groove, which can be used to evaluate the developmental stage of the trochlea in clinical practice and to guide targeted treatment of trochlear dysplasia. Level of evidence: III. [ABSTRACT FROM AUTHOR]

Elbow computerized tomography (CT) scans have been widely applied for describing elbow morphology. To enhance the objectivity and efficiency of clinical diagnosis, an automatic method to recognize, segment, and reconstruct elbow joint bones is proposed in this study. The method involves three steps: initially, the humerus, ulna, and radius are automatically recognized based on the anatomical features of the elbow joint, and the prompt boxes are generated. Subsequently, elbow MedSAM is obtained through transfer learning, which accurately segments the CT images by integrating the prompt boxes. After that, hole-filling and object reclassification steps are executed to refine the mask. Finally, three-dimensional (3D) reconstruction is conducted seamlessly using the marching cube algorithm. To validate the reliability and accuracy of the method, the images were compared to the masks labeled by senior surgeons. Quantitative evaluation of segmentation results revealed median intersection over union (IoU) values of 0.963, 0.959, and 0.950 for the humerus, ulna, and radius, respectively. Additionally, the reconstructed surface errors were measured at 1.127, 1.523, and 2.062 mm, respectively. Consequently, the automatic elbow reconstruction method demonstrates promising capabilities in clinical diagnosis, preoperative planning, and intraoperative navigation for elbow joint diseases.

Background: In addition to CT images and pathological features, many other molecular characteristics remain unknown about multiple primary lung cancer (MPLC) from intrapulmonary metastatic lung cancer. Case presentation: In this study, we reported a patient with an early-stage MPLC with both adenocarcinoma in situ (AIS) subtype and minimally invasive adenocarcinoma (MIA) subtype. The patient was diagnosed with more than 10 nodules and underwent precise surgery assisted by three-dimensional (3D) reconstruction at the left upper lung lobe. Whole-exome sequencing (WES) and multiple immunohistochemistry (mIHC) were performed to reveal the genomic profiling and tumor microenvironments of multiple nodules in this patient with MPLC. Based on 3D reconstruction location information, we found that the genomic and pathological results of adjacent lymph nodes were quite different. On the other hand, PD-L1 expression and the proportion of infiltrating lymphocytes in tumor microenvironments were all at a low status and did not vary in adjacent lymph nodes. Additionally, maximum diameter and tumor mutational burden levels were found to be significantly associated with CD8+ T cell proportion (p<0.05). Besides, CD163+ macrophages and CD4+ T cell proportion were higher in MIA nodules than in AIS nodules (p<0.05). This patient reached a recurrence-free survival of 39 months. Conclusion: Generally, in addition to CT imaging and pathological results, genomic profiling and tumor microenvironments may facilitate identifying the potential molecular mechanisms and clinical outcomes in patients with earlystage MPLC. [ABSTRACT FROM AUTHOR]

Internal erosion is a phenomenon that fine particles migrate through the channels within coarse matrix under seepage flow. Previous studies mainly focused on the internal erosion under steady hydraulic gradient, while the studies on the behavior and mesoscopic mechanism of internal erosion under fluctuating hydraulic condition were rarely reported. In this study, a setup of transparent soil seepage test was developed. Seepage tests on two types of soils with different internal stability were conducted under steady and fluctuating hydraulic conditions respectively to investigate the internal erosion behaviors under fluctuating hydraulic condition. The macroscopic experimental phenomenon showed that when the hydraulic gradient exceeded the critical value, the hydraulic conductivity under fluctuating hydraulic condition increased faster than that under steady hydraulic condition for internally unstable soil, manifesting that hydraulic fluctuation aggravated the migration of fine particles. In order to further reveal the mesoscopic mechanism, a three-dimensional (3D) reconstruction method was employed to rebuild the mesoscopic fabric of soil based on two-dimensional cross-sectional images obtained by the planar laser scanning; and a 3D visualization digital model including coarse matrix, inter-granular pore channels and fine particles was established. By observing the distribution of fine particles in pore channels, it was found that fine particles might clog and accumulate at narrow pore throats under steady seepage. While the perturbation caused by hydraulic fluctuation could break these weak stable structures of clog and accumulation, and then restart the migration process of fine particles.

BackgroundIn addition to CT images and pathological features, many other molecular characteristics remain unknown about multiple primary lung cancer (MPLC) from intrapulmonary metastatic lung cancer.Case presentationIn this study, we reported a patient with an early-stage MPLC with both adenocarcinoma in situ (AIS) subtype and minimally invasive adenocarcinoma (MIA) subtype. The patient was diagnosed with more than 10 nodules and underwent precise surgery assisted by three-dimensional (3D) reconstruction at the left upper lung lobe. Whole-exome sequencing (WES) and multiple immunohistochemistry (mIHC) were performed to reveal the genomic profiling and tumor microenvironments of multiple nodules in this patient with MPLC. Based on 3D reconstruction location information, we found that the genomic and pathological results of adjacent lymph nodes were quite different. On the other hand, PD-L1 expression and the proportion of infiltrating lymphocytes in tumor microenvironments were all at a low status and did not vary in adjacent lymph nodes. Additionally, maximum diameter and tumor mutational burden levels were found to be significantly associated with CD8+ T cell proportion (p

In cold climates, early-age cementitious material is easily threatened by frost damage, causing deterioration of material properties. To investigate the hazard and failure mechanism of cement paste due to early frost damage, the cement hydration process was divided into five stages via the electrical resistivity method, and then fresh cement pastes were frozen in five stages and two different temperatures, respectively. Furthermore, mechanical tests and X-ray computed tomography scanning were carried out to characterize the development of frost-related damage. The results indicated that the effect of initial frost time on strength growth is greater than that of freezing temperature, and the cement matrix can be considered completely damaged when frost-related damage occurs before the initial setting. The frost-related texture develops from outside to inside and the porosity of the sample frozen at the first three stages was higher than that of samples frozen at the last two stages. Finally, the frost-related damage could be divided into three types: flow extrusion damage, freezing expansion cracking damage, and flow extrusion-freezing expansion cracking combined damage. [ABSTRACT FROM AUTHOR]

To ensure the safety and reliability operation of infrastructures, accurate and rapid condition assessment of in-service infrastructures is extremely imperative. Image technologies and techniques, as a non-destructive evaluation (NDE) tool, have created new opportunities to achieve this. It is able to resolve sub-millimeter details including surface flaws and defects, providing a foundation for quantitatively linking observable features to operational performance. This linkage is possible when the quantified feature is directly integrated into tools suitable for describing mechanical response, such as the finite element method. However, the workflow associated with this integration is indirect and presents challenges. This work creates a pathway for a direct scan-to-model strategy suitable for translating condition data derived from a 3D laser scanning system into a computation model capable of describing the mechanical response of the component. The geometric characterization capabilities of the proposed approach and the influence of scan resolution on the geometric characterization are explored. Results of this study provide the foundation of a computational framework for establishing the fundamental link between visually observable geometric changes and the numerical models that engineers use to understand the performance of engineered systems. [ABSTRACT FROM AUTHOR]

The three-dimensional (3D) pore structures and permeability of shale are critical for forecasting gas production capacity and guiding pressure differential control in practical reservoir extraction. However, few investigations have analyzed the effects of microscopic organic matter (OM) morphology and 3D pore nanostructures on the stress sensitivity, which are precisely the most unique and controlling factors of reservoir quality in shales. In this study, ultra-high nanoscale-resolution imaging experiments, i.e. focused ion beam-scanning electron microscopy (FIB-SEMs), were conducted on two organic-rich shale samples from Longmaxi and Wufeng Formations in northern Guizhou Depression, China. Pore morphology, porosity of 3D pore nanostructures, pore size distribution, and connectivity of the six selected regions of interest (including clump-shaped OMs, interstitial OMs, framboidal pyrite, and microfractures) were qualitatively and quantitatively characterized. Pulse decay permeability (PDP) measurement was used to investigate the variation patterns of stress-dependent permeability and stress sensitivity of shales under different confining pressures and pore pressures, and the results were then used to calculate the Biot coefficients for the two shale formations. The results showed that the samples have high OM porosity and 85% of the OM pores have the radius of less than 40 nm. The OM morphology and pore structure characteristics of the Longmaxi and Wufeng Formations were distinctly different. In particular, the OM in the Wufeng Formation samples developed some OM pores with radius larger than 500 nm, which significantly improved the connectivity. The macroscopic permeability strongly depends on the permeability of OM pores. The stress sensitivity of permeability of Wufeng Formation was significantly lower than that of Longmaxi Formation, due to the differences in OM morphology and pore structures. The Biot coefficients of 0.729 and 0.697 were obtained for the Longmaxi and Wufeng Formations, respectively.

Precise documentation of as-is status of transportation infrastructures is an essential task for several public transportation agencies. To tackle this task, such agencies have adopted various advanced technologies, such as light detection and ranging (LiDAR), for three-dimensional (3D) reconstruction and as-built documentation purposes. In this research, we study the feasibility of an alternative 3D reconstruction method, photogrammetry, which has the advantage of being inexpensive and easy to operate compared to LiDAR. To assess the proposed alternative method in transportation asset-inventory collection, this paper evaluates the feasibility of using photogrammetry in providing an acceptable 3D point cloud model of two important categories of transportation assets: roadway assets and pedestrian access ramps. The analysis of the data quality and associated cost attests to the feasibility of using close-range photogrammetry in pedestrian access ramps inventory, while using this technology as a complementary tool with LiDAR in the mobile setting holds the promise for a feasible roadway asset data collection. [ABSTRACT FROM AUTHOR]

Abstract It is difficult to estimate the effective rotation velocity for non‐triaxial stabilized space targets, which leads to deviations in the estimation of imaging plane vectors and azimuth resolution. This makes it hard to reconstruct the three‐dimensional (3D) of space targets based on inverse synthetic aperture radar (ISAR) image sequence. To solve this problem, a joint estimation method of imaging plane vector and 3D structure based on ISAR image sequences is proposed. First, a compact form of imaging plane vector is defined. Then, the 3D structure of a target is characterized by a fully connected deep network. The volume rendering for ISAR images is redesigned with the analysis of projection formula for ISAR imaging. The network is trained using the discrepancy between the modulus of rendered and observed ISAR images in a self‐supervised manner without 3D supervision. And the 3D structure can be obtained by inquiring all points in the 3D space. Therefore, it can optimize imaging planes and produce more complete and accurate results for complex space targets. Adequate simulation experiments verify its superiority.

Image-based three-dimensional (3D) reconstruction utilizes a set of photos to build 3D model and can be widely used in many emerging applications such as augmented reality (AR) and disaster recovery. Most of existing 3D reconstruction methods require a mobile user to walk around the target area and reconstruct objectives with a hand-held camera, which is inefficient and time-consuming. To meet the requirements of delay intensive and resource hungry applications in 5G, we propose an edge computing-based photo crowdsourcing (EC-PCS) framework in this paper. The main objective is to collect a set of representative photos from ubiquitous mobile and Internet of Things (IoT) devices at the network edge for real-time 3D model reconstruction, with network resource and monetary cost considerations. Specifically, we first propose a photo pricing mechanism by jointly considering their freshness, resolution and data size. Then, we design a novel photo selection scheme to dynamically select a set of photos with the required target coverage and the minimum monetary cost. We prove the NP-hardness of such problem, and develop an efficient greedy-based approximation algorithm to obtain a near-optimal solution. Moreover, an optimal network resource allocation scheme is presented, in order to minimize the maximum uploading delay of the selected photos to the edge server. Finally, a 3D reconstruction algorithm and a 3D model caching scheme are performed by the edge server in real time. Extensive experimental results based on real-world datasets demonstrate the superior performance of our EC-PCS system over the existing mechanisms. [ABSTRACT FROM AUTHOR]

It is difficult to estimate the effective rotation velocity for non‐triaxial stabilized space targets, which leads to deviations in the estimation of imaging plane vectors and azimuth resolution. This makes it hard to reconstruct the three‐dimensional (3D) of space targets based on inverse synthetic aperture radar (ISAR) image sequence. To solve this problem, a joint estimation method of imaging plane vector and 3D structure based on ISAR image sequences is proposed. First, a compact form of imaging plane vector is defined. Then, the 3D structure of a target is characterized by a fully connected deep network. The volume rendering for ISAR images is redesigned with the analysis of projection formula for ISAR imaging. The network is trained using the discrepancy between the modulus of rendered and observed ISAR images in a self‐supervised manner without 3D supervision. And the 3D structure can be obtained by inquiring all points in the 3D space. Therefore, it can optimize imaging planes and produce more complete and accurate results for complex space targets. Adequate simulation experiments verify its superiority. [ABSTRACT FROM AUTHOR]

Structural insights into macromolecular and protein complexes provide key clues about the molecular basis of the function. Cryogenic electron microscopy (cryo-EM) has emerged as a powerful structural biology method for studying protein and macromolecular structures at high resolution in both native and near-native states. Despite the ability to get detailed structural insights into the processes underlying protein function using cryo-EM, there has been hesitancy amongst plant biologists to apply the method for biomolecular interaction studies. This is largely evident from the relatively fewer structural depositions of proteins and protein complexes from plant origin in electron microscopy databank. Even though the progress has been slow, cryo-EM has significantly contributed to our understanding of the molecular biology processes underlying photosynthesis, energy transfer in plants, besides viruses infecting plants. This chapter introduces sample preparation for both negative-staining electron microscopy (NSEM) and cryo-EM for plant proteins and macromolecular complexes and data analysis using single particle analysis for beginners., (© 2024. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Simple Summary: We report the first clinical use of Endosight, a new guidance system for percutaneous interventional procedures based on augmented reality, to guide percutaneous thermal ablations. The new system was demonstrated to be precise and reliable, with a targeting accuracy of 3.4 mm. Clinically acceptable, rapid setup and procedural times can be achieved. Background: Over the last two decades, augmented reality (AR) has been used as a visualization tool in many medical fields in order to increase precision, limit the radiation dose, and decrease the variability among operators. Here, we report the first in vivo study of a novel AR system for the guidance of percutaneous interventional oncology procedures. Methods: Eight patients with 15 liver tumors (0.7–3.0 cm, mean 1.56 + 0.55) underwent percutaneous thermal ablations using AR guidance (i.e., the Endosight system). Prior to the intervention, the patients were evaluated with US and CT. The targeted nodules were segmented and three-dimensionally (3D) reconstructed from CT images, and the probe trajectory to the target was defined. The procedures were guided solely by AR, with the position of the probe tip was subsequently confirmed by conventional imaging. The primary endpoints were the targeting accuracy, the system setup time, and targeting time (i.e., from the target visualization to the correct needle insertion). The technical success was also evaluated and validated by co-registration software. Upon completion, the operators were assessed for cybersickness or other symptoms related to the use of AR. Results: Rapid system setup and procedural targeting times were noted (mean 14.3 min; 12.0–17.2 min; 4.3 min, 3.2–5.7 min, mean, respectively). The high targeting accuracy (3.4 mm; 2.6–4.2 mm, mean) was accompanied by technical success in all 15 lesions (i.e., the complete ablation of the tumor and 13/15 lesions with a >90% 5-mm periablational margin). No intra/periprocedural complications or operator cybersickness were observed. Conclusions: AR guidance is highly accurate, and allows for the confident performance of percutaneous thermal ablations. [ABSTRACT FROM AUTHOR]