Search

Nowadays, a variety of underwater activities, such as underwater surveillance, marine monitoring, etc., are becoming crucial worldwide. Underwater sensors and autonomous underwater vehicles (AUVs) are widely adopted for underwater exploration. Underwater communication via radio frequency (RF) or acoustic wave suffers high transmission loss and limited bandwidth. In this work, we present and demonstrate a rolling shutter (RS)-based underwater optical camera communication (UWOCC) system utilizing a long short-term memory neural network (LSTM-NN) with side glow optical fiber (SGOF). SGOF is made of poly-methyl methacrylate (PMMA) SGOF. It is lightweight and flexibly bendable. Most importantly, SGOF is water resistant; hence, it can be installed in an underwater environment to provide 360° "omni-directional" uniform radial light emission around its circumference. This large FOV can fascinate the optical detection in underwater turbulent environments. The proposed LSTM-NN has the time-memorizing characteristics to enhance UWOCC signal decoding. The proposed LSTM-NN is also compared with other decoding methods in the literature, such as the PPB-NN. The experimental results demonstrated that the proposed LSTM-NN outperforms the PPB-NN in the UWOCC system. A data rate of 2.7 kbit/s can be achieved in UWOCC, satisfying the pre-forward error correction (FEC) condition (i.e., bit error rate, BER ≤ 3.8 × 10−3). We also found that thin fiber also allows performing spatial multiplexing to enhance transmission capacity. [ABSTRACT FROM AUTHOR]

Visible Light Communication (VLC) is emerging as a promising technology to meet the demands of fifth-generation (5G) networks and the Internet of Things (IoT). This study introduces a novel RGB-LED-based VLC system design that leverages autoencoders, addressing the often overlooked impact of optical-to-electrical (O/E) conversion efficiency. Unlike traditional methods, our autoencoder-based system not only improves communication performance but also mitigates the negative effects of O/E conversion. Through comprehensive simulations, we show that the proposed autoencoder structure enhances system robustness, achieving superior performance compared to traditional VLC systems. By quantitatively assessing the impact of O/E conversion—a critical aspect previously overlooked in the literature—our work bridges a crucial gap in VLC research. This contribution not only advances the understanding of VLC systems but also provides a strong foundation for future enhancements in 5G and IoT connectivity. [ABSTRACT FROM AUTHOR]

In the realm of future wireless networks, it is anticipated that high altitude platforms (HAP)-satellite links will serve as the primary facilitators. Optical wireless communication has become increasingly important due-to its exceptional features and ability to provide gigabit capacity communication. As such, this work explores an optical code division multiple access scheme centred on high-speed long-haul mode division multiplexing for HAP-to-satellite applications. The proposed design utilizes zero cross-correlation (ZCC) and multi-diagonal (MD) codes at donut modes 0 and 1. The main objective of this research is to create a cost-effective, secure, and cutting-edge last mile linkage that optimizes resource utilization for HAP systems. The results indicate that the system employing ZCC code outperforms the MD code. Moreover, the system accomplishes a minimum bit error rate limit of 10−3 at transmission distances of 5000 km and 4800 km at Donut mode 0 and 1, respectively, for the ZCC code. In addition, the system can tolerate maximum acceptable transmitter pointing errors of 3 µrad and receiver pointing errors of 4 µrad at minimum BER limit. Meanwhile the system using ZCC can offer better performance of maximum 28 dB optical signal to noise ratio till high split ratio of 1:4–1:64. It also indicates optimum performance over other existing ones. [ABSTRACT FROM AUTHOR]

The current paper explores the impact of misalignment between transceivers (referred to as pointing error (PE)) on the performance of transdermal optical wireless (TOW) technology, as indicated by average signal-to-noise ratio (SNR), outage probability (OP), outage rate (OR), and average ergodic capacity (AEC). This study was inspired by the effectiveness of differential phase shift keying (DPSK) in enhancing the reliability of the link in free-space optical communications (FSO). Furthermore, this enhancement was studied and analyzed in consideration of the impact of pointing errors. In particular, this paper presents a mathematical analysis that considers certain characteristics of the channel, limitations within the body, the pointing errors (PEs) between the transceivers, and other specific aspects of the optical unit. The results demonstrate the significant impact of PEs on the reliability of the TOW link and highlight the improvement provided by the DPSK technique. i.e., 3 dB better performance compared to the on-off keying (OOK) modulation technique. Finally, this research demonstrates the practical application of wireless optical technology in the medical field within the wavelength range of 800–1300 nm, with optimal performance observed around 1100 nm. [ABSTRACT FROM AUTHOR]

The underwater optical wireless communication (UOWC) is a relatively new area of research which has generated enthusiasm for the military, industry, and scientific community. The blue–green spectrum provides the most optimum band for optical wireless communication in underwater (sea water) scenario. Considering the limitations of acoustic waves having limited bandwidth, UOWC promises to support higher data rates with low latency compared to RF and acoustic mode of communication. This paper proposes a novel mathematical channel-modeling for UOWC, in a weak turbulent environment. The turbulence-induced irradiance fluctuation is modeled by log normal distribution. The parameters are related to line-of-sight underwater links. The analytical expression for the average bit-error-rate, outage probability, and the average channel capacity is derived for three types of water, i.e., clear ocean, coastal ocean, and turbid harbor. We also analyze the effects of turbulence for the above parameters. For clear and coastal ocean, data rate falls around 10 9 and 10 8 bits per second within 10 m distance, respectively, whereas the data rate in case of turbid harbor hardly reaches 1 Mbps and drops drastically within a few meters. [ABSTRACT FROM AUTHOR]

This study presents insights into high-speed optical wireless communication (OWC) within plastic pipes, introducing a Gbps-capable alternative for challenging environments. Utilizing a 1W LED with five wavelengths, the experiment explores signal power, attenuation, and bandwidth characteristics. Notably, the blue LED achieves an unprecedented 58.64 MHz bandwidth, red and purple LEDs demonstrate novel bandwidths of approximately 25.23 MHz, and green and yellow LEDs exhibit unique bandwidths of 23.75 MHz and 9.62 MHz, respectively. The attenuation parameters for different wavelengths provide numerous insights, showcasing the novelty of this research and its potential applications in robot communication within plastic pipes. Concurrently, the paper introduces an approach to address the temperature impact on five distinct wavelength LEDs in OWC. By focusing on variations in LED bandwidth and optical power, an optimal heat sink design is proposed. This design achieves a remarkable minimum temperature of 27.06°C and reduces the chip LED device’s response time from 15 to 9 seconds. The significance lies in the novelty of the proposed heat sink, which incorporates variables such as fin thickness, height, air gap width, number of fins, and airflow rate, marking a substantial advancement in thermal management for OWC systems.

Nowadays, a variety of underwater activities, such as underwater surveillance, marine monitoring, etc., are becoming crucial worldwide. Underwater sensors and autonomous underwater vehicles (AUVs) are widely adopted for underwater exploration. Underwater communication via radio frequency (RF) or acoustic wave suffers high transmission loss and limited bandwidth. In this work, we present and demonstrate a rolling shutter (RS)-based underwater optical camera communication (UWOCC) system utilizing a long short-term memory neural network (LSTM-NN) with side glow optical fiber (SGOF). SGOF is made of poly-methyl methacrylate (PMMA) SGOF. It is lightweight and flexibly bendable. Most importantly, SGOF is water resistant; hence, it can be installed in an underwater environment to provide 360° “omni-directional” uniform radial light emission around its circumference. This large FOV can fascinate the optical detection in underwater turbulent environments. The proposed LSTM-NN has the time-memorizing characteristics to enhance UWOCC signal decoding. The proposed LSTM-NN is also compared with other decoding methods in the literature, such as the PPB-NN. The experimental results demonstrated that the proposed LSTM-NN outperforms the PPB-NN in the UWOCC system. A data rate of 2.7 kbit/s can be achieved in UWOCC, satisfying the pre-forward error correction (FEC) condition (i.e., bit error rate, BER ≤ 3.8 × 10−3). We also found that thin fiber also allows performing spatial multiplexing to enhance transmission capacity.

The necessity for access to a high data rate has been the motivation behind expanding new technologies. The increasing of wireless devices has caused the radio wave spectrum to become congested. Additionally, radio waves cannot be used in EMI-vulnerable places. Hence, the interest in visible light communication (VLC) offers real alternatives to radio-based communications. This paper focuses on the use of visible light as a data communication medium and introduces a designed audio SIMO (Single-Input-Multi-Output) data transmission system from point to multipoint to demonstrate the functionality of the VLC system in audio transmission through modulated LEDs light. The system is made up of the transmitting unit and multi-receiving units. The transmitting unit consists of three stages: audio in, preamplifier, and white LEDs array that transmits the data using the ON-OFF keying (OOK) modulation technique to all receivers. On the other hand, the receiving unit consists of three receivers that have different photodetectors aspects with fixed distances separation between them. The line of sight (LOS) communication between transmitter and receivers for the purpose to transfer audio data has been employed. Based on the LOS link, simulation and experimental analysis have been done in multiple semi-angles for studying the output performance of receivers and the characteristics of the white LEDs such as luminous intensity and received power at 20,45 and 70 semi-angle at half-power through MATLAB® software. [ABSTRACT FROM AUTHOR]

Light-Fidelity (Li-Fi) is the bidirectional communication technique, tenders almost unlimited bandwidth, exploit unlicensed spectrum of light waves. Accordingly, this manuscript illustrates usage of visible light communication (VLC) applied as Li-Fi, an efficient scheme to broadcast data wirelessly as well safer technique in contrary to the customary Wireless-Fidelity (Wi-Fi) networks. In support numerical simulations have been executed over the proposed Li-Fi model for the parametric variation with the data rate, laser power, modulation format and wavelength, communication length. Investigations have showed good output performance, with hike in data rate BER variation as 10−94–10−23 and testing length. Simulations of network with DPSK and NRZ modulation formats at high data transmission of 10 Gbps have showed good output performance with 10−40 with DPSK format. Li-Fi systems are quality solution for the impending communication systems save cost, provide high spectral efficiency. [ABSTRACT FROM AUTHOR]

Visible Light Communication (VLC) is emerging as a promising technology to meet the demands of fifth-generation (5G) networks and the Internet of Things (IoT). This study introduces a novel RGB-LED-based VLC system design that leverages autoencoders, addressing the often overlooked impact of optical-to-electrical (O/E) conversion efficiency. Unlike traditional methods, our autoencoder-based system not only improves communication performance but also mitigates the negative effects of O/E conversion. Through comprehensive simulations, we show that the proposed autoencoder structure enhances system robustness, achieving superior performance compared to traditional VLC systems. By quantitatively assessing the impact of O/E conversion—a critical aspect previously overlooked in the literature—our work bridges a crucial gap in VLC research. This contribution not only advances the understanding of VLC systems but also provides a strong foundation for future enhancements in 5G and IoT connectivity.

The automatic modulation recognition (AMR) of optical signals in non-cooperative conditions has recently become one of the most important research projects. The feasibility and effectiveness of using deep learning techniques for automatic modulation format recognition of received wireless optical communication signals is investigated in this framework. Convolutional neural network (CNN) architecture has been developed and refined in recent work to attain performance that outperforms expert-based approaches. An AMR technique based on fan-beam (FB) projection was proposed in this study. The constellation diagram is created by preprocessing the received signal. The constellation diagram is then projected in the FB domain. The FB is used as a tool for extracting features. The (CNN) uses this projected constellation diagram as input to identify different types of modulation formats. For determining the modulation format of an optical signal, three types of classifiers (Alexnet, VGG16, and VGG19) are investigated. For our investigations, we looked at the constellation diagrams of eight common signals, including (2/4/8/16- phase-shift keying (PSK) and 8/16/32/64- quadrature amplitude modulation (QAM). Typical classification accuracy values versus optical signal-to-noise ratio (OSNR) are calculated for evaluation over an OSNR range of (5–30 dB). A study of the effect of increasing the number of samples on the accuracy of the classifiers is also presented for each modulation format. Finally, the phase noise resistance of the (FB) projected diagram is investigated. When compared to traditional modulation format recognition algorithms, simulation results suggest that the proposed algorithm presented in this paper has a greater accuracy rate for signal modulation recognition at low OSNR. [ABSTRACT FROM AUTHOR]

Optical wireless communication (OWC) has emerged as a promising solution to the radio spectrum crunch. OWC technology requires more access points (APs) compared to other wireless technologies, making it crucial to have reliable OWC APs to ensure low repair rates and optimal network availability. To address this, our paper provides methods to enhance the reliability of duplex OWC AP transceivers and calculates their reliability parameters. The transceiver design consists of several independent modules, and we calculate the failure in time (FIT) for each module using MTBF calculator software and component datasheets. Our reliability analysis includes two methods: mean time between failure (MTBF) calculations using reliability block diagrams and Markov chain modeling. The former identifies modules with a high failure rate and determines the system’s cumulative downtime or repair time, while the latter accounts for the repair rates of individual modules for availability calculations. Both methods complement each other and provide insight into fault-tolerant system designs. Furthermore, we perform a life cycle cost analysis of the proposed fault-tolerant transceiver designs to facilitate appropriate design choices for different applications.

We put forward and demonstrate a steerable optical beam visible light communication (VLC) system combining orthogonal frequency division multiplexing (OFDM) and non-orthogonal multiple access (NOMA) schemes, and utilizing a spatial light modulator (SLM)-based reconfigurable intelligent surface (RIS) for beam steering. When utilizing the SLM as RIS for optical beam steering, its operation principle, maximum achievable steering angle (i.e., field-of-view, FOV), as well as the corresponding loss should be analyzed. We theoretically and experimentally analyzed in detail the characters of SLM when acting as the RIS. Experimental results demonstrate the flexibility of both active beam control and data rate allocation for multiple users. The SLM-based RIS can independently and simultaneously control multiple beams, and significantly reduce the deploying cost of the increase in the devices for the multi-beam handling scenario. All of the specified channels under evaluation satisfy the pre-forward error correction bit-error rate limit (pre-FEC BER = 3.8 × 10−3).

Single-photon avalanche diodes (SPADs) capable of single photon detection are promising optical sensors for use as receivers in optical wireless communication (OWC) systems. In SPAD-based receivers, the intersymbol interference (ISI) effect caused by dead time is an important drawback that limits performance. In this paper, we propose two novel SPAD operation modes to reduce the ISI effect in SPAD-based OWC. To validate the feasibility of these two modes, we designed a free-running SPAD front-end circuit with post-layout transient simulation results and some measurements to show its function and performance. This SPAD circuit is improved by a novel mixed passive-active quench and reset front-end circuit that achieves a very short dead time. Based on the traditional free-running mode, we design the clock-driven mode and time-gated mode to reduce the ISI effect through time-controlled operating signals. To accurately evaluate these three modes, we develop a new simulation system to assess the ISI effect in On-Off Keying (OOK) modulated communication. The simulation results demonstrate that the clock-driven mode and time-gated mode receivers can improve the bit error rate (BER) performance in low data rate communication and high data rate high optical power communication, respectively. Moreover, compared to the free-running mode, the two proposed time-controlled modes achieve higher data rate communication and better noise tolerance ability in SPAD-based OWC.

The combined use of distributed multiple-input multiple-output (D-MIMO) and orthogonal frequency division multiplexing (OFDM) with adaptive bit and power loading is seen as a powerful tool to overcome limitations of the optical wireless communication (OWC) channel and of light-emitting diodes (LED)s. Although extensive research into efficient MIMO algorithms has been performed for communications via radio, these may not be indiscriminately re-used in LED-based OWC systems. The main reasons are that the OWC channel has different properties, the LEDs have power-constraints, and eye-safety regulations apply. For adoption in a practical system, the computational complexity of the algorithms must also be taken into account. Fortunately, physical properties of the LED D-MIMO channel allow us to reduce signalling overhead, estimation effort and complexity. This paper presents, compares, and discusses both the performance and the computational cost of several new power-loading strategies to enhance the throughput of LED-based OFDM D-MIMO OWC systems respecting the individual power constraints of the light sources. To cope with the low-pass nature of LEDs, we optimize how much power to load on each MIMO spatial stream, on each sub-carrier and what bandwidths to use. The CVX toolbox for convex optimization gives us an optimum but it is orders of magnitude more complex than highly effective heuristic approaches. A simple approach stays 1 dB short of the optimum: it equally splits power among MIMO streams within the LED power constraints, and it uniformly spreads the power over a bandwidth that is optimized per stream. A similar strategy, but selecting optimized powers per stream brings us as near as 0.1 dB to the optimum. To evaluate the complexity of bit and power allocations, we investigate, optimize, and accelerate the speed of iterative schemes. The proposed approaches give new choices for chipset manufacturers and LED-based OFDM D-MIMO OWC system designers to improve performance and to reduce overhead.

In this work, we put forward and demonstrate a bi-direction free-space visible light communication (VLC) system supporting multiple moveable receivers (Rxs) using a light-diffusing optical fiber (LDOF). The downlink (DL) signal is launched from a head-end or central office (CO) far away to the LDOF at the client side via a free-space transmission. When the DL signal is launched to the LDOF, which acts as an optical antenna to re-transmit the DL signal to different moveable Rxs. The uplink (UL) signal is sent via the LDOF towards the CO. In a proof-of-concept demonstration, the LDOF is 100 cm long, and the free space VLC transmission between the CO and the LDOF is 100 cm. 210 Mbit/s DL and 850 Mbit/s UL transmissions meet the pre-forward-error-correction bit error rate (pre-FEC BER = 3.8 × 10−3) threshold. [ABSTRACT FROM AUTHOR]

The huge bandwidth and immunity to electromagnetic interference make visible light communication (VLC) systems the preferred technique for many applications. Unfortunately, the superposition of multiple subcarriers in VLC orthogonal frequency division multiplexing systems leads to a high peak-to-average power ratio (PAPR). So, in this study, we aim to reduce PAPR in VLC systems and improve the system performance by proposing non-distorting PAPR reduction techniques like precoding techniques as it doesn't affect the system data rate because they do not require any obligatory transmission of side information. Moreover, it has a very good ability to reduce the PAPR without affecting the system BER performance. So, different precoding reduction techniques are proposed like discrete cosine transform (DCT), discrete sine transform (DST), discrete Hatley transform (DHT), and Vandermonde like matrix (VLM), to address the high PAPR and light-emitting diode-restricted linear range problems in VLC systems. The proposed technique using DHT, DCT, DST, and VLM provided a significant advantage in reducing the PAPR by 1.35 dB, 1.46 dB, 2.12 dB, and 2.17 dB, respectively. So the proposed technique is based on using the VLM precoding technique to achieve maximum reachable PAPR reduction value. Also, a comparison of the presented work and related literature reviews for PAPR reduction techniques are held to ensure the validity and effectiveness of the proposed scheme. [ABSTRACT FROM AUTHOR]

This paper introduces a new hybrid system for high-bandwidth and high-transmission-capacity communication. The system integrates a multi-mode fiber (MMF) cable with free space optics (FSO) using orbital angular momentum (OAM) multiplexing. The proposed system uses a single wavelength to simultaneously transmit 40 Gb/s data on four distinct OAM beams ((LG0,0, LG0,17, LG0,40, and LG0,75)) with a symmetric circular shape. The performance of the system was evaluated with a fixed MMF length of 100 m and varying FSO ranges, according to extreme climate changes such as rain and fog, and atmospheric turbulences. The results indicate that the suggested system is capable of transmit up to 1250 m (100 m MMF length + 1150 m FSO range) under clear weather (CW) and weak turbulence (WT), with a minimum transmission distance of 440 m (100 m MMF length + 340 m FSO range) under heavy fog (HF). The performance of the system was also demonstrated based on actual meteorological data for two different cities, Alexandria, Egypt and Chandigarh, India, with different visibility ranges and geographical locations. Since Alexandria has a longer visibility range than Chandigarh, our proposed model could spread over a larger area than it could be in Chandigarh. The obtained ranges were within an acceptable bit error rate (BER) of less than 10−9. The system’s maximum range was 1200 m for Alexandria and 1100 m for Chandigarh. The proposed model can be suggested for use in next generation (NG) passive optical networks (PON) for supporting symmetric 40 Gb/s data.

In this paper, we propose and investigate a hybrid multi-band carrierless amplitude and phase modulation and non-orthogonal multiple access (mCAP-NOMA) scheme for quality-of-service (QoS)-aware uplink multi-user optical wireless communication (OWC) systems. Considering the users' distinctive channel conditions and QoS requirements, we further design three user pairing approaches for the mCAP-NOMA-based uplink OWC system, including channel gain-based user pairing, modulation order-based user pairing and adaptive user pairing. More specifically, the adaptive user pairing approach can dynamically select from the individual channel gain-based or modulation order-based user pairing approaches aiming to obtain a lower average bit error rate (BER) of the uplink OWC system. Simulation results verify the feasibility and superiority of the mCAP-NOMA scheme with adaptive user pairing in an uplink four-user OWC system. [ABSTRACT FROM AUTHOR]

Summary: The integrated OWC‐PON architecture has a potential to overcome the limitations of existent RF technology and eliminate the last mile bottleneck in geographically constrained access networks thus providing real sense broadband from core to user. However, phenomenon such as atmospheric turbulence causes performance degradation in such systems. In the dissemination of multimedia services, the performance is the ultimate quality as perceived by end user's visual senses. To ascertain this quality in quantitative terms, full reference quality metrics are employed for communication purposes. This paper deals with classification, evaluation and analysis of various image quality assessment metrics for image transmission over OWC channel under varying turbulent conditions. The performance enhancement in terms of these metrics is investigated by deploying MIMO diversity reception. Moreover, a prediction model for SSIM is developed and compared for both SISO and MIMO links. The results show an improvement in IQA metrics with diversity reception. SSIM can be predicted in terms of log of refractive index structure parameter by a fourth order polynomial model for both SISO and MIMO receptions under all regimes of turbulence. The goodness of the fit statistics is presented along with the models to provide for their accuracy and reliability. [ABSTRACT FROM AUTHOR]

Copyright of Informacije MIDEM: Journal of Microelectronics, Electronic Components & Materials is the property of MIDEM Society and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The high precision three-dimensional (3D) visible light-based indoor positioning (VLIP) systems have gained much attention recently for people or robot navigation, access tracking, etc. In this work, we put forward and present the first demonstration, up to the authors' knowledge, of a 3D VLIP system utilizing a two-stage neural network (TSNN) model. The positioning performance would degrade when the distance between the light emitting diode (LED) plane and the receiver (Rx) plane increases; however, because of the finite LED field-of-view (FOV), light non-overlap zones are created. These light non-overlap zones will produce high positioning error particularly for the 3D VLIP systems. Here, we also propose and demonstrate the Received-Intensity-Selective-Enhancement scheme, known as RISE, to alleviate the light non-overlap zones in the VLIP system. In a practical test-room with dimensions of 200 × 150 × 300 cm3, the experimental results show that the mean errors in the training and testing data sets are reduced by 54.1% and 27.9% when using the TSNN model with RISE in the z-direction, and they are reduced by 39.1% and 37.8% in the xy-direction, respectively, when comparing that with using a one stage NN model only. At the cumulative distribution function (CDF) P90, the TSNN model with RISE can reduce the errors by 36.78% when compared with that in the one stage NN model. [ABSTRACT FROM AUTHOR]

In order to achieve high-capacity visible light communication (VLC), five dimensions in physics, including frequency, time, quadrature modulation, space, and polarization can be utilized. Orthogonality should be maintained in order to reduce the crosstalk among different dimensions. In this work, we illustrate a high-capacity 21.01 Gbit/s optical beam steerable VLC system with vibration mitigation based on orthogonal frequency division multiplexed (OFDM) non-orthogonal multiple access (NOMA) signals using red, green, and blue (RGB) laser-diodes (LDs). The OFDM-NOMA can increase the spectral efficiency of VLC signal by allowing high overlapping of different data channel spectra in the power domain to maximize the bandwidth utilization. In the NOMA scheme, different data channels are digitally multiplexed using different levels of power with superposition coding at the transmitter (Tx). Successive interference cancellation (SIC) is then utilized at the receiver (Rx) to retrieve different power multiplexed data channels. The total data rates (i.e., Data 1 and Data 2) achieved by the R/G/B OFDM-NOMA channels are 8.07, 6.62, and 6.32 Gbit/s, respectively, achieving an aggregated data rate of 21.01 Gbit/s. The corresponding average signal-to-noise ratios (SNRs) of Data 1 in the R, G, and B channels are 9.05, 9.18 and 8.94 dB, respectively, while that of Data 2 in the R, G, and B channels are 14.92, 14.29, and 13.80 dB, respectively. [ABSTRACT FROM AUTHOR]

We put forward and provide the first illustration of a high capacity and high spectral efficient free space optical communication (FSOC) system using digital domain power division multiplexing orthogonal-frequency-division-multiplexed (DDPD-O-OFDM) signal utilizing 10-GHz class optical components. In the proof-of-concept demonstration, a data rate of 2 × 30.8 Gbit/s can be achieved for each polarization multiplexed wavelength channel, fulfilling the pre-forward-error-correction bit-error-ratio (pre-FEC BER = 3.8 × 10−3). By employing the DDPD-O-OFDM here, the FSOC per channel capacity can be enhanced not only allowing the spectral overlapping of different orthogonal subcarriers, as in the case of OFDM; but also allowing channel multiplexing in the power domain to increase the spectral efficiency. The principle of DDPD-O-OFDM is discussed; and BER and signal-to-noise ratio (SNR) of different DDPD channels are experimentally measured.

We propose to utilize a commercially available DIALux lighting design software for simulation and planning of machine learning (ML) based angle-of-arrival (AOA) visible light positioning (VLP) systems. Here, different ML models, for example, second order linear regression (LR), artificial neural-network (ANN), and convolutional neural-network (CNN) are employed. The proposed VLP simulator works well with different ML algorithms. The results show that the proposed scheme can acts as an effective indoor VLP planning and design tool. Besides, it may also alleviate the training data collection in ML based VLP systems.

This paper studies the capacity of the two-user intensity-modulation/direct-detection (IM/DD) interference channel (IC), which is relevant in the context of multi-user optical wireless communications. Despite some known single-letter capacity characterizations for general discrete-memoryless ICs, a computable capacity expression for the IM/DD IC is missing. In this paper, we provide tight and easily computable inner and outer bounds for a general two-user IM/DD IC under peak and average optical intensity constraints. The bounds enable characterizing the asymptotic sum-rate capacity in the strong and weak interference regimes, as well as the generalized degrees of freedom (GDoF) in the symmetric case. Using the obtained bounds, the GDoF of the IM/DD IC is shown to have a ‘W’ shape similar to the Gaussian IC with power constraints. The obtained bounds are also evaluated numerically in different interference regimes to show their tightness, and used to study the performance of on-chip and indoor OWC systems. [ABSTRACT FROM AUTHOR]

Summary: The preceding decade has seen successful rollout of 5G and convergence of broadcast broadband and telecom sector. The near future bandwidth demands for services such as advanced immersive multimedia are even more challenging. This has led to advent of 6G. The access technologies need to provide virtually unlimited data rates to support majority of applications in 6G. The optical wireless communication (OWC) with its inherent advantages is a potential enabler in this scenario. However, phenomenon such as atmospheric turbulence poses a serious degradation to performance of such systems. For multimedia services, end user perception is the ultimate quality indicator. To ascertain this quality in quantitative terms, full reference quality metrics are employed for communication purposes. In this paper, digital video broadcasting terrestrial (DVB‐T) videos with varying complexities are transmitted over OWC‐passive optical network (PON) architecture. For performance enhancement 2 × 2 repetitive coding MIMO is employed with maximal ratio combining receiver. A total of 6 video quality assessment (VQA) metrics are evaluated for the system w.r.t channel parameter as Rytov variance. For all the VQA metrics, an enhancement in the performance is observed by using MIMO technique. This performance improvement is more prominent for more complex video as compared to less complex video. As for the limiting case BER of 10−3 gives a limiting link distance of 1350 m; however with VQA metrics, the limiting case distance is 1280 m. By the use of 2 × 2 MIMO techniques, this distance enhances by 20–25 m. [ABSTRACT FROM AUTHOR]

Visible light communication (VLC) is a versatile enabling technology for following high-speed wireless communication because of its broad unlicensed spectrum. In this perspective, white light-emitting diodes (LED) provide both illumination and data transmission simultaneously. To accomplish a VLC system, receiver antennas play a crucial role in receiving light signals and guiding them toward a photodetector to be converted into electrical signals. This paper demonstrates an optical receiver antenna based on luminescent solar concentrator (LSC) technology to exceed the conservation of etendue and reach a high signal-to-noise ratio. This optical antenna is compatible with all colors of LEDs and achieves an optical efficiency of 3.75%, which is considerably higher than the similar reported antenna. This antenna is fast due to the small attached photodetector—small enough that it can be adapted for electronic devices—which does not need any tracking system. Moreover, numerical simulation is performed using a Monte Carlo ray-tracing model, and results are extracted in the spectral domain. Finally, the fate of each photon and the chromaticity diagram of the collected photons' spectra are specified. [ABSTRACT FROM AUTHOR]

In this work, we put forward and demonstrate a bi-direction free-space visible light communication (VLC) system supporting multiple moveable receivers (Rxs) using a light-diffusing optical fiber (LDOF). The downlink (DL) signal is launched from a head-end or central office (CO) far away to the LDOF at the client side via a free-space transmission. When the DL signal is launched to the LDOF, which acts as an optical antenna to re-transmit the DL signal to different moveable Rxs. The uplink (UL) signal is sent via the LDOF towards the CO. In a proof-of-concept demonstration, the LDOF is 100 cm long, and the free space VLC transmission between the CO and the LDOF is 100 cm. 210 Mbit/s DL and 850 Mbit/s UL transmissions meet the pre-forward-error-correction bit error rate (pre-FEC BER = 3.8 × 10−3) threshold.

In this letter, we propose and experimentally demonstrate an optical wireless communication (OWC) system with embedded localization functionalities based on reflectometry, that share both the OWC hardware platform and the orthogonal frequency division multiplexing (OFDM) communication waveform. Using a low-cost off-the-shelf laser diode we experimentally demonstrate a joint OWC and sensing system, with data rates of approximately 3.6 Gbit/s with EVM around 8% and simultaneously able to localize targets with non-ideal reflectance surfaces, with 15 cm resolution. Our approach reduces installation and operational costs, alleviates the calibration process, as well as allows for cooperation between communication and localization functionalities at the physical layer. [ABSTRACT FROM AUTHOR]

Keywords: passive optical networks (PON); visible-light communication (VLC); light-emitting diodes (LED); optical wireless communication (OWC); infrared LED (IR-LED) EN passive optical networks (PON) visible-light communication (VLC) light-emitting diodes (LED) optical wireless communication (OWC) infrared LED (IR-LED) 379 383 5 07/05/22 20220701 NES 220701 1 Introduction Nowadays, requirements for high-speed and high-capacity networks are increasing with a great pace, more often in buildings, due to the greater use of Internet services and online games [[1], [3]]. To provide solution to microwave frequency-dependent communication, optical wireless communication using visible-light communication (VLC) is recognized as the potential way out and premier alternative based on low-cost light-emitting diodes (LEDs) [[5]]. Passive optical networks (PON), visible-light communication (VLC), light-emitting diodes (LED), optical wireless communication (OWC), infrared LED (IR-LED) 5 Wang Y, Wang Y, Chi N, Yu J, Shang H. Demonstration of 575-Mb/s downlink and 225-Mb/s uplink bi-directional SCM-WDM visible light communication using RGB LED and phosphor-based LED. [Extracted from the article]

With the remarkable advances in vertical-cavity surface-emitting lasers (VCSELs) in recent decades, VCSELs have been considered promising light sources in the field of optical wireless communications. However, off-the-shelf VCSELs still have a limited modulation bandwidth to meet the multi-Gb/s data rate requirements imposed on the next-generation wireless communication system. Recently, employing machine learning (ML) techniques as a method to tackle such issues has been intriguing for researchers in wireless communication. In this work, through a systematic analysis, it is shown that the ML technique is also very effective in VCSEL-based visible light communication. Using a commercial VCSEL and bidirectional long short-term memory (Bi-LSTM)-based ML scheme, a high-speed visible light communication (VLC) link with a data rate of 13.5 Gbps is demonstrated, which is the fastest single channel result from a cost-effective, off-the-shelf VCSEL device, to the best of the authors' knowledge. [ABSTRACT FROM AUTHOR]

Intensity modulation and direct detection (IM-DD) based optical wireless communication (OWC), requires the modulated signal to be real and non-negative. To satisfy the requirements, this paper proposes two types of mixed orthogonal frequency division multiplexing (X-OFDM) waveforms. The Hermitian symmetry (HS) characteristic of the sub-carriers in the frequency domain, guarantees the signal in the time domain to be real, which reduces the spectral efficiency to 1/2. For the odd sub-carriers in the frequency domain, the signal in the time domain after the inverse fast fourier transform (IFFT) is antisymmetric. For the even sub-carriers in the frequency domain, the signal in the time domain after the IFFT is symmetric. Based on the antisymmetric and symmetric characteristics, the two types of X-OFDM waveforms are designed to guarantee the signal in the time domain to be non-negative. With $M$ sub-carriers in the frequency domain, the generated signal in the time domain has $3M/2$ points, which further reduces the spectral efficiency to 1/3. The numerical simulations show that, the two types of X-OFDM waveforms greatly enhance the power efficiency considering the OWC channel with the signal-dependent noise and/or the signal-independent noise. [ABSTRACT FROM AUTHOR]

For upcoming futuristic communication systems, the Optical Wireless Communication (OWC) with its inherent advantages is becoming popular among service providers. The research in the past has primarily focused on Quality of service (QoS) aspect for OWC in the presence of atmospheric turbulence however, to assess the real time outcome of a service, the evaluation of both QoS and Quality of Experience (QoE) deliver a holistic approach. A much Less effort in the existing literature has been paid to this. Authors in this work attempt to determine the QoE for image transmission over a turbulent OWC link while considering the Structure Similarity Index (SSIM) as a visual performance indicator under varying turbulence strengths (regimes). A functional model to forecast the performance of SSIM practicable for all the regimes is proposed. The most suitable model is bimodal Gaussian mixture model which aptly describes the system performance. To improve the performance, spatial domain filters such as Median and Wiener filters have been employed. An increase of 125 m in the propagation distance and 5.88 dB in received SNR can be achieved while maintaining the SSIM at a 90% for median filter restoration in moderate turbulence regime for simulated values while predicted values suggest an increase of 115 m and 5.18 dB at same level. The results show that the proposed model is in good agreement with simulated values and median filter in moderate turbulence performs best out of all the situations. [ABSTRACT FROM AUTHOR]

In order to achieve high-capacity visible light communication (VLC), five dimensions in physics, including frequency, time, quadrature modulation, space, and polarization can be utilized. Orthogonality should be maintained in order to reduce the crosstalk among different dimensions. In this work, we illustrate a high-capacity 21.01 Gbit/s optical beam steerable VLC system with vibration mitigation based on orthogonal frequency division multiplexed (OFDM) non-orthogonal multiple access (NOMA) signals using red, green, and blue (RGB) laser-diodes (LDs). The OFDM-NOMA can increase the spectral efficiency of VLC signal by allowing high overlapping of different data channel spectra in the power domain to maximize the bandwidth utilization. In the NOMA scheme, different data channels are digitally multiplexed using different levels of power with superposition coding at the transmitter (Tx). Successive interference cancellation (SIC) is then utilized at the receiver (Rx) to retrieve different power multiplexed data channels. The total data rates (i.e., Data 1 and Data 2) achieved by the R/G/B OFDM-NOMA channels are 8.07, 6.62, and 6.32 Gbit/s, respectively, achieving an aggregated data rate of 21.01 Gbit/s. The corresponding average signal-to-noise ratios (SNRs) of Data 1 in the R, G, and B channels are 9.05, 9.18 and 8.94 dB, respectively, while that of Data 2 in the R, G, and B channels are 14.92, 14.29, and 13.80 dB, respectively.

The high precision three-dimensional (3D) visible light-based indoor positioning (VLIP) systems have gained much attention recently for people or robot navigation, access tracking, etc. In this work, we put forward and present the first demonstration, up to the authors’ knowledge, of a 3D VLIP system utilizing a two-stage neural network (TSNN) model. The positioning performance would degrade when the distance between the light emitting diode (LED) plane and the receiver (Rx) plane increases; however, because of the finite LED field-of-view (FOV), light non-overlap zones are created. These light non-overlap zones will produce high positioning error particularly for the 3D VLIP systems. Here, we also propose and demonstrate the Received-Intensity-Selective-Enhancement scheme, known as RISE, to alleviate the light non-overlap zones in the VLIP system. In a practical test-room with dimensions of 200 × 150 × 300 cm3, the experimental results show that the mean errors in the training and testing data sets are reduced by 54.1% and 27.9% when using the TSNN model with RISE in the z-direction, and they are reduced by 39.1% and 37.8% in the xy-direction, respectively, when comparing that with using a one stage NN model only. At the cumulative distribution function (CDF) P90, the TSNN model with RISE can reduce the errors by 36.78% when compared with that in the one stage NN model.

Visible light communication (VLC) is a versatile enabling technology for following high-speed wireless communication because of its broad unlicensed spectrum. In this perspective, white light-emitting diodes (LED) provide both illumination and data transmission simultaneously. To accomplish a VLC system, receiver antennas play a crucial role in receiving light signals and guiding them toward a photodetector to be converted into electrical signals. This paper demonstrates an optical receiver antenna based on luminescent solar concentrator (LSC) technology to exceed the conservation of etendue and reach a high signal-to-noise ratio. This optical antenna is compatible with all colors of LEDs and achieves an optical efficiency of 3.75%, which is considerably higher than the similar reported antenna. This antenna is fast due to the small attached photodetector—small enough that it can be adapted for electronic devices—which does not need any tracking system. Moreover, numerical simulation is performed using a Monte Carlo ray-tracing model, and results are extracted in the spectral domain. Finally, the fate of each photon and the chromaticity diagram of the collected photons’ spectra are specified.

With the remarkable advances in vertical-cavity surface-emitting lasers (VCSELs) in recent decades, VCSELs have been considered promising light sources in the field of optical wireless communications. However, off-the-shelf VCSELs still have a limited modulation bandwidth to meet the multi-Gb/s data rate requirements imposed on the next-generation wireless communication system. Recently, employing machine learning (ML) techniques as a method to tackle such issues has been intriguing for researchers in wireless communication. In this work, through a systematic analysis, it is shown that the ML technique is also very effective in VCSEL-based visible light communication. Using a commercial VCSEL and bidirectional long short-term memory (Bi-LSTM)-based ML scheme, a high-speed visible light communication (VLC) link with a data rate of 13.5 Gbps is demonstrated, which is the fastest single channel result from a cost-effective, off-the-shelf VCSEL device, to the best of the authors’ knowledge.

• Here, a beam dividable and steerable optical wireless communication (OWC) system adopting a spatial light modulator (SLM) is presented. The reconfigurable multiple beam splitter as well as the adjustable splitting ratio are demonstrated. • Experimental results show the proposed system can nearly evenly partition the input beam into up to five spots and can have the adjustable splitting ratio for the two-spot case. • Combining with non-orthogonal multiple access (NOMA) and wavelength division multiplexing (WDM) technique, the proof-of-concept experimental demonstration shows the proposed system can provide 320.08 Gbit/s and 179.68 Gbit/s for the single-user scenario without beam steering and with steering of about 4°, respectively. The ability to reconfigure and adapt to different application scenarios plays an important role in future wireless communication systems. Here, a beam dividable and steerable optical wireless communication (OWC) system adopting a spatial light modulator (SLM) is presented. The reconfigurable multiple beam splitter as well as the adjustable splitting ratio are demonstrated. Experimental results show the proposed system can nearly evenly partition the input beam into up to five spots and can have the adjustable splitting ratio for the two-spot case. Combining non-orthogonal multiple access (NOMA) and wavelength division multiplexing (WDM), the proof-of-concept experimental demonstration shows the proposed system can provide 320.08 Gbit/s and 179.68 Gbit/s for the single-user scenario without beam steering and with steering of about 4°, respectively. Moreover, the data rates pairs of (92.20 Gbit/s, 119.17 Gbit/s) and (51.50 Gbit/s, 124.78 Gbit/s) can be achieved for the two-user scenario at different beam steering angles, respectively. The flexibility of data rate allocation for multiple users is also discussed. The OWC system under evaluation can satisfy the pre-forward error correction bit-error rate limit (pre-FEC BER = 3.8 × 10−3). [ABSTRACT FROM AUTHOR]

This paper focuses on image sensor communication (ISC) using cameras to receive wireless signals transmitted by visible lights. We summarize the technical principles of ISC from the perspective of transmitting devices. An introduction to the development and applications of ISC was provided, starting with the history of image sensors and visible light communication (VLC). Moreover, the communication mechanism of ISC using complementary metal–oxide–semiconductor (CMOS) sensors is explained in this paper. Specifically, we investigate studies using an optical communication image sensor and the rolling shutter technique for high-speed ISC. Further, we highlight three distinctive transmitting devices in ISC: a LED array, rotating LEDs, and displays, and explain them in terms of structure and signal transmission methods. In particular, we present the parallel transmission of LED arrays and their application in traffic systems and introduce an optical flow-based signal transmission method using rotating LEDs. In addition, two visual transmission techniques in displays-based-ISC using brightness-difference and high-frequency flashing are introduced, respectively. This paper intuitively explains these ISC techniques and reveals ISC's high versatility. • We summarize image sensor communication (ISC) techniques from the transmitters' view. • We present a parallel ISC transmission using LED arrays and its traffic application. • We demonstrate a new transmitter that achieves high throughput using optical flow. • In addition, visual transmission techniques in ISC are investigated. [ABSTRACT FROM AUTHOR]

• A new hybrid system for high-bandwidth and high-transmission-capacity communication is introduced. • The system integrates a multi-mode fiber (MMF) cable with free space optics (FSO) using orbital angular momentum (OAM) multiplexing. • The proposed system uses a single wavelength to simultaneously transmit 40 Gb/s data on four distinct OAM beams. This paper introduces a new hybrid system for high-bandwidth and high-transmission-capacity communication. The system integrates a multi-mode fiber (MMF) cable with free space optics (FSO) using orbital angular momentum (OAM) multiplexing. The proposed system uses a single wavelength to simultaneously transmit 40 Gb/s data on four distinct OAM beams (( LG 0 , 0 , LG 0 , 17 , LG 0 , 40 , and LG 0 , 75 )) with a symmetric circular shape. The performance of the system was evaluated with a fixed MMF length of 100 m and varying FSO ranges, according to extreme climate changes such as rain and fog, and atmospheric turbulences. The results indicate that the suggested system is capable of transmit up to 1250 m (100 m MMF length + 1150 m FSO range) under clear weather (CW) and weak turbulence (WT), with a minimum transmission distance of 440 m (100 m MMF length + 340 m FSO range) under heavy fog (HF). The performance of the system was also demonstrated based on actual meteorological data for two different cities, Alexandria, Egypt and Chandigarh, India, with different visibility ranges and geographical locations. Since Alexandria has a longer visibility range than Chandigarh, our proposed model could spread over a larger area than it could be in Chandigarh. The obtained ranges were within an acceptable bit error rate (BER) of less than 10−9. The system's maximum range was 1200 m for Alexandria and 1100 m for Chandigarh. The proposed model can be suggested for use in next generation (NG) passive optical networks (PON) for supporting symmetric 40 Gb/s data. [ABSTRACT FROM AUTHOR]