Search

The Gordon coupler was introduced for use in EPR experiments at liquid helium temperatures. It provides an evanescent wave incident on the iris of a microwave resonator. Match of power incident on the coupler to the resonator is obtained by variation of the amplitude of an evanescent wave that arises from displacement of a dielectric wedge in a tapered waveguide. Reduced microphonics from helium bubbling was reported. The Gordon coupler was subsequently extended from cavity resonators to loop-gap resonators, initially at helium temperatures but later for aqueous samples. Plastics with low dielectric constants, usually Teflon, were used. Here, we extend the Gordon coupler for application in X-band five-loop-four-gap resonators using fused quartz, sapphire, or rutile dielectrics, noting that the size of the coupler can then be commensurate with dimensions of dielectric loop-gap resonators as well as dielectric tube resonators. Finite element modeling of electromagnetic fields has been carried out, and use of a capacitive iris that interfaces with the Gordon coupler reduces pulling of the resonant frequency when matching the resonator.

[Display omitted] • A 2.0-GHz ESR spectrometer was developed to detect lubrication oil degradation. • The prototype spectrometer is compact for use in the automobile industry. • A marginal oscillator can help detect ESR absorption at 2.0 GHz. • The oscillator circuit involves a loop-gap resonator to realize oscillation. This article reports a simple, compact, and cost-effective electron spin resonance (ESR) spectrometer for monitoring automobile lubrication oil degradation. Lubrication oil degradation strongly correlates with the concentration of stable free radicals caused by hydrocarbon chain decomposition due to heating. For the prototype spectrometer, the amplitude shift in a marginal oscillator output detects ESR absorption in a sample. The spectrometer's spin sensitivity of 2.3 × 1014 spins for a used oil sample was achieved using the marginal oscillator with a loop-gap resonator. For the prototype spectrometer, the oscillation frequency was 2.09 GHz. The volume of the prototype spectrometer was 1.3 L, including a permanent magnet, microwave circuits, and digital communication circuitry on printed circuit boards. The weight of the spectrometer setup was 1.45 kg. This prototype spectrometer successfully detected the ESR signal from a 50 μL oil sample (spin concentration 8.3 x1019 spins/L) with a signal-to-noise ratio of 37 and an acquisition time of 30 s. [ABSTRACT FROM AUTHOR]