Search

The human nasal cavity develops from birth with size anatomical changes. This study aims to evaluate the flow parameters and particle deposition parameters. Neonatal and infant nasal cavities are developed using MIMICS 21.0, and the flow is evaluated by ANSYS 2021 R2 using CFD to evaluate velocity, pressure, micro- and nanoparticle depositions under sedentary breathing conditions. Neonatal nasal valve velocity was recorded 3.5 times higher compared to the infant for 1.8 LPM and 2.7 times for 3 LPM. Neonatal vestibular depositions up to 10 µm were 6.6%, which increased to 76% for 60 µm for 1.8 LPM and increased to 21.3% for 10 µm and 79% for 60 µm for 1.8 LPM. The neonatal nasal valve showed maximum depositions of around 35% for 20 µm for both flow rates. Maximum depositions of nanoparticles are in the mid-nasal region. Infant nasal cavities deposit around 1% to 2% for nanoparticles below 20 nm for both flow rates. Neonatal overall microparticle depositions doubled with an increase in flow rate up to 10 µm. The overall deposition efficiency of nanoparticles increases 1.5 times with increasing flow rate. This study will help with the medical administration of aerosol-based medications in the patient and age-specific nasal cavity. [ABSTRACT FROM AUTHOR]

Objective: The nasal cavity effectively captures the particles present in inhaled air, thereby preventing harmful and toxic pollutants from reaching the lungs. This filtering ability of the nasal cavity can be effectively utilized for targeted nasal drug delivery applications. This study aims to understand the particle deposition patterns in three age groups: neonate, infant, and adult. Materials and methods: The CT scans are built using MIMICS 21.0, followed by CATIA V6 to generate a patient-specific airway model. Fluid flow is simulated using ANSYS FLUENT 2021 R2. Spherical monodisperse microparticles ranging from 2 to 60 µm and a density of 1100 kg/m3 are simulated at steady-state and sedentary inspiration conditions. Results: The highest nasal valve depositions for the neonate are 25% for 20 µm, for infants, 10% for 50 µm, 15% for adults, and 15% for 15 µm. At mid nasal region, deposition of 15% for 20 µm is observed for infant and 8% for neonate and adult nasal cavities at a particle size of 10 and 20 µm, respectively. The highest particle deposition at the olfactory region is about 2.7% for the adult nasal cavity for 20 µm, and it is <1% for neonate and infant nasal cavities. Discussion and conclusions: The study of preferred nasal depositions during natural sedentary breathing conditions is utilized to determine the size that allows medication particles to be targeted to specific nose regions. [ABSTRACT FROM AUTHOR]

The selection of abrasive material and parameters of the Air-Abrasion device for a particular application is a crucial detail. However, there are no standard recommendations or manuals for choosing these details; the operator must depend on his experience and knowledge of the procedure to select the best possible material and set of parameters. This short review attempts to identify some of the effects that the selection of material and parameters could have on the performance of the Air-Abrasion procedure for a particular application. The material and parameter data are collected from various studies and categorized according to the most popular materials in use right now. These studies are then analyzed to arrive at some inferences on the performance of Air-Abrasion materials and parameters. This review arrives at a few conclusions on the effectiveness of a material and parameter set, and that there is potential for developments in the area of standardizing parameter selection; also, there is scope for further studies on Bio-Active Glass as an alternative to the materials currently used in Air-Abrasion. [ABSTRACT FROM AUTHOR]

Renal transplantation is the treatment of choice for improved survival and quality of life in patients with end-stage renal disease. However, perirenal fluid collections are common surgical complications after renal transplant, with about 0.6 to 18% of patients developing a lymphocele. Conventional treatments include percutaneous aspiration and drainage, laparoscopic fenestration, and open surgical decompression stepwise. Recently, a new image-guided percutaneous transperitoneal balloon fenestration technique has been described as an alternative to the laparoscopic or surgical technique. We present the case of a 25-year-old male patient diagnosed with a lymphocele after 2 months of transplantation and no resolution of the lymphocele with percutaneous aspiration and drainage. We used this new technique under ultrasound and fluoroscopy guidance, which resulted in the resolution of the lymphocele at 1 month postprocedure. This case report highlights this new technique's potential role in successfully managing the posttransplant lymphocele in a minimally invasive manner. [ABSTRACT FROM AUTHOR]

The airflow behaviour and particle deposition before and after the maxillary expansion are evaluated using the computational fluid dynamics method. A pediatric patient was subjected to maxillary expansion and the CT scans of pre and post were recorded. The procured CT scans were developed into 3D models using Materialise MIMICS 21.0 (Materialise, Ann Arbor, MI). The analysis was performed using ANSYS FLUENT 2020 R2 with three different flow rates defined at the nostril inlet as 5, 10, and 15 LPM. The surface area and nasal volume increased by 5.1% and 16.5%, respectively, for the post-maxillary expansion case. The velocity profiles show a maximum value at the nasal valve regions followed by a decreased velocity in the mid-nasal region with an 85% lower velocity observed at the nasal valve for the post-maxillary expansion case. The nasal resistance and pressure drop decrease by 46% to 66% in post-maxillary expansion cases. The maximum WSS at the nasal valve region is observed which is reduced by around 47% for postmaxillary expansion cases. Particle deposition studies show a reduction in particle depositions in post cases indicating a greater number of inhaled particles reaching the lungs. The pressure drop and the nasal resistance values were reduced by more than 50% for post-maxillary expansion. The particle deposition studies show increased depositions at higher flow rates for both cases. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In replacement surgery of the hip joint, an implant is replaced into the natural femur which recreates the articulation and functionally of a natural joint. Total hip replacement is significantly increasing by the day worldwide and is likely to increase by 174% by 2030. Primary revision is another major concern for total hip replacement with revision rates likely to increase by 137%. The first part of the article states the basic anatomy of the hip joint, different ligaments in the hip, the disorders associated with the joint, and evaluation of total hip arthroplasty. In the second part some of the major works are highlighted followed by a detailed discussion about different design considerations and wear-related issues in hip joints. More emphasis is given to the tribological behavior of implants under different conditions. The design aspects and several parameters which affect the wear rate in implants are summarized. Also, different testing methods which are used both in experimental and numerical techniques are reported to estimate the wear rates in hip implants with the evolution of hip implants since the early 20th century, in terms of different designs, materials and wear hip implant arthroplasty is known as one of the best advancements in healthcare. Further research is needed to establish to improve the life expectancy of hip implants. [ABSTRACT FROM AUTHOR]

AbstractFace cups form a vital component of breathing, assisting with devices that aid in artificial breathing for neonates. This study aims to evaluate the flow parameters in the nasal cavity for two different types of face cups. The neonatal nasal cavity model was developed from CT scans using MIMICS 21.0. Two face cups, one hemispherical and the other anatomical shaped cups are developed around the nasal cavity and the airflow is simulated using ANSYS 2021 R2. Results are compared with a nasal-only model. At the nasal valve region, the highest velocity is seen for the nasal-only model which is 16.3% higher than that of the hemispherical face cup and 15.2% superior to the anatomical-shaped face cup. In addition, the decrease in pressure across the nasal-only model is 7.4 and 6.6% below that of the hemispherical cup and anatomical cup masks. The nasal resistance values across the nasal cavity are the lowest for the nasal-only model, 7.7 and 6.7% lower respectively than the hemispherical and anatomical-shaped cups. There were very minor changes in the flow parameters such as velocity, pressure and wall shear stress when comparing the hemispherical and anatomic-shaped masks for the airflow inside the nasal cavity. [ABSTRACT FROM AUTHOR]

This research addresses the need for enhanced biomaterials by investigating the influence of the NCO/OH ratio on sodium alginate-based polyurethane elastomers(Al-PUEs), offering novel insights into their structural, thermal, mechanical and swelling behavior. Al-PUEs were prepared by blending the chain extenders with key ingredients in a specific molar ratio using aliphatic HMDI and HTPB monomers. The chemical linkages, crystalline behavior, homogeneity, and surface morphology of PUEs were evaluated by FT-IR, XRD, SEM, and EDX analysis. Thermo-mechanical studies were performed using TGA, DSC and tensile testing. Swelling behavior and absorption analysis were analyzed in DMSO and water. The analysis indicated that the hydrophilicity and swelling behavior of the prepared PUEs were affected by the addition of sodium alginate content. The results exhibit the tailor-made network structure of Al-PUEs, resulting in better thermal stability, elasticity of materials via stress-strain behavior and marvelous characteristic features than traditional high-tech yields. Furthermore, the resulting Al-PUEs are potential candidates for biomedical implants., Competing Interests: Declaration of competing interest On behalf of all my co-authors I hereby declare that we have no conflict of interest for the manuscript being submitted for publication to the journal “International Journal of Biological Macromolecules”., (Copyright © 2024 Elsevier B.V. All rights reserved.)