Search

Calcium leaching from cement hydrates has been shown to decrease the durability and shorten the service life of the concrete. Earlier studies have focused on investigating the leaching progress in deionized water or ammonium nitrate solutions, neglecting the effects of aggressive ion concentrations, types, and temperatures. In addition, the current equilibrium curve of calcium leaching is based on experimental data in deionized water, and its applicability to calcium leaching in actual marine environments is controversial. In this study, a dissolution experiment was carried out to study the effects of chloride ion concentrations and environmental temperatures. The functional relationship of critical parameters (x1 , x2 , and Csatu) of the equilibrium curves with the chloride ion concentrations and temperatures was established. Furthermore, considering the influence of calcium leaching on porosity and the diffusion coefficient of cementitious materials, the calcium leaching model was established within a time and space framework. The results showed that calcium leaching was accelerated by the increased concentration of chloride ions and the decrease in environmental temperature. In the authors' view, this study lays a theoretical foundation for a transport-reaction-mechanical deterioration model of concrete. [ABSTRACT FROM AUTHOR]

Earthquake damage investigation is critical to post‐earthquake structural recovery and reconstruction. In this study, a method of assessing the component failure mode and damage level was established based on object detection and recognition. A quantitative structural damage level assessment method was developed based on the type and extent of damage to the components. A You Only Look Once v4 (YOLOv4) network was used to detect multicategory damage (fine crack, wide crack, concrete spalling, exposed rebar and buckled rebar). Depthwise separable convolution was introduced into YOLOv4 to decrease the computation cost without reducing accuracy. Finally, the damage detection method and assessment method were integrated within a graphical user interface (GUI) to facilitate the post‐earthquake reinforced concrete (RC) structural damage assessment. The test results by GUI indicate that the improved object network can get accurate detection results, and the preliminary safety assessment method can judge the damage level and failure mode. The present study shows high potential for estimating the seismic damage states of RC structures. [ABSTRACT FROM AUTHOR]

The nonlinear constitutive model of the structural plane is very important for the stability evaluation of the geotechnical engineering, and is also the key to the accuracy of the numerical analysis. In this paper, the shear tests are carried out under different roughness and normal stress, and the change laws of the mechanical properties are revealed under the influence of two factors. The relationship equations, with the normal stress (σ n) and the roughness (JRC), are established for various mechanical parameters. Then, on the basis of the statistical damage mechanics, the shear damage nonlinear constitutive model is established, and the accuracy and practicability are verified by different shear test results. The empirical relationships are established for the model parameters (a and r) with the normal stress, roughness and rock wall strength (JCS), by the multi-factor optimization analysis method. Finally, the discrete element is selected, and the C++ is used to compile the running program of the constitutive model to realize numerical application. Different numerically simulated shear tests are carried out to verify the feasibility of the numerical application. The research results are beneficial for the stability evaluation in the geotechnical engineering. [ABSTRACT FROM AUTHOR]

Great autogenous shrinkage has become a common problem in cement-based materials with a low water-to-binder ratio (w/b). To limit the autogenous shrinkage in ultra-high performance concrete (UHPC) during the process of hydration and curing, sustainable use of recycled micropowder (RMP) made from autoclaved aerated concrete waste (AACW) to cure UHPC internally is proposed in this paper. The influence of RMP (at the levels 5%, 10%, and 15% by mass) with three particle size classes ranging from 0 to 600 μm on the autogenous shrinkage, hydration reaction, internal relative humidity, and compressive strength of UHPC were investigated. The results show that mixtures with different dosages and particle sizes improve the fluidity of UHPC, and its internal curing effect can effectively inhibit the early-age autogenous shrinkage of UHPC and maintain a higher internal humidity compared with the control group. The incorporation of RMP can advance the appearance of a hydration peak and increase the cumulative heat of hydration. Microscale analyses show that the curing water released from RMP promotes the hydration of the unhydrated cement around RMP. The generated hydration product filled the surface pores of RMP and weakened the negative effect of the pores introduced by RMP on the compressive strength of UHPC. Thus, RMP can be utilized as internal curing materials for UHPC to reduce autogenous shrinkage. • The potential for internal curing of RMP in UHPC is investigated. • Autogenous shrinkage of UHPC with RMP is reduced by 65%. • The underlying mechanism behind internal curing of RMP has been explored. • Compressive strength of UHPC with RMP can still exceed 160 MPa at 28 days. [ABSTRACT FROM AUTHOR]

• A experimental study is conducted to investigate the mechanism of calcium leaching of cement hydrates exposed to the sodium sulfate solution. • The influences of sulfate ions concentration and environmental temperature are analyzed on calcium leaching process. • The solid–liquid equilibrium curve describing calcium leaching in deionized water is extended to sodium sulfate solutions. Calcium leaching from cement hydrates to pore solution increases the porosity and reduces the bonding strength of cement hydrates, accelerating the degradation of concrete. Calcium leaching can be quantified by solid–liquid equilibrium curves, which have been studied in deionized water or ammonium nitrate. The research of solid–liquid equilibrium curve of calcium under sulfate attack is limited and its mechanism is poorly understood. Reported here provide insights into the dissolution process of calcium from cement hydrates exposed to the sodium sulfate solution. The experimental programme examines the effects of sulfate ion concentration and temperature. An external sulfate attack (ESA) model considering the influence of calcium leaching is established and validated. The results show that, compared to deionized water, sulfate ions impact strongly the leaching process. Qualitatively, the dissolution of calcium in cement hydrates is accelerated by increasing the concentration of sulfate ions and decreasing the environmental temperature. Quantitatively, the presence of sulfate ions modifies the equilibrium curve describing calcium leaching in deionized water. In addition, the prediction results of the ESA model considering the influence of calcium leaching are in good agreement with the experimental results. [ABSTRACT FROM AUTHOR]

[Display omitted] • Influence of PCT and additives on the compressive strength and permeability was investigated. • Low strength ratios of permeable concrete to cement paste results from the low bonding area. • Enhanced bonding ratio can produce the greatest benefit in terms of strength. • Loss of permeability is the result of both reduced connected porosity and increased tortuosity. • Cement paste thickness distribution and pore size distribution were predicted by lognormal function. The macro performance and mesostructure of permeable concrete are largely determined by the paste coating thickness (PCT) on aggregates within the fresh mixture. Accordingly, in the present study, the strength and permeability of permeable concrete with different paste coating thicknesses were measured. The mesostructure characteristics of cement paste and pore were subsequently quantified by X-ray CT images and image processing techniques. As a result, the influence of PCT on the compressive strength and permeability, the characteristics of cement paste and pore was determined. The distribution of cement paste thickness and total pore size were used as functions of paste coating thickness, which coud be used to predict these mesostructure characteristics at the design stage of permeable concrete. The significance of this paper includes providing a deeper understanding of the relationship between macro performance and mesostructure from the perspective of paste coating thickness within mixtures. [ABSTRACT FROM AUTHOR]

Assessing the long-term durability of concrete structures subjected to external sulfate attack (ESA) poses a significant challenge, primarily due to the lack of a well-defined quantitative metric for durability limit states. Traditional performance indicators such as compressive strength, mass loss, and expansion strain are insufficient for providing a comprehensive understanding of the extent of damage and are often difficult to measure accurately in practice. The primary objective of this study is to introduce a novel durability failure indicator, namely the failure thickness of concrete under ESA exposure, designed to quantitatively assess the ultimate limit state of concrete durability. Experiments were conducted and the results confirmed that the failure thickness can reliably reflect changes in both the elastic modulus and compressive strength of concrete exposed to ESA. A prediction model for estimating the failure thickness was subsequently developed, integrating key influencing factors like sulfate concentration, initial aluminate content, and sulfate ion diffusion coefficient. The established model exhibited a high degree of correlation between the predicted and experimental failure thickness values, with a low margin of error. The findings of this research contribute to serve as a foundation for both lifespan prediction and durability design of concrete structures exposed to sulfate-rich environments. • We propose a durability failure indicator based on critical sulfate concentration. • Concrete performance deterioration can be well characterized by failure thickness. • The validity of the prediction model of failure thickness was confirmed. [ABSTRACT FROM AUTHOR]

• A novel LPFG-based fiber optic laser-ultrasonic transducer was proposed. • Precise modulation of optical mode coupling can be achieved by LPFG. • The multi-point and energy-balanced ultrasonic excitation was achieved. For ultrasonic non-destructive testing, the development of miniaturized, embeddable, and distributed ultrasonic transducers has always been a hot research topic. In light of this, a novel fiber optic laser-ultrasonic transducer, employing the long-period fiber grating (LPFG), was introduced in this study to facilitate the implementation of embedded and distributed applications. LPFG couples the light transmitted in the optical fiber into the photoacoustic conversion material. After the energy conversion of optic-heat-acoustic, ultrasonic waves can be excited. The finite element models of the mode coupling and photoacoustic conversion of LPFG were established. The transmission spectrum and optical power of LPFG were measured by experiments. The results show that by adjusting the structural parameters of LPFG to make it appear as different transmission depths, the quantitative control of the optical power distribution of the core and cladding can be realized. Two LPFGs, each with distinct coupling coefficients, were fused together and anchored onto aluminum plates to create an ultrasonic transducer with dual micro-ultrasonic sources. An ultrasonic excitation experiment was carried out, and the results revealed that both two LPFGs could excite ultrasonic waves with a peak-to-peak value of about 500 mV and a center frequency of about 3 MHz. The study validates the proposed fiber-optic ultrasonic transducer's steady performance and its potential for multi-point applications. [ABSTRACT FROM AUTHOR]

This study investigates the efficacy of post-fire curing using carbonation with a 20% carbon dioxide concentration and a relative humidity cycle set between 40% and 90% for restoring the mechanical properties of thermally damaged high-performance concrete (HPC) specimens containing 0%–40% silica fume. The HPC specimens were exposed to temperatures of 600, 800, and 1000 °C for 1 h, and the compressive strength recovery was measured. The microstructure, porosity, pore size distribution, and chemical composition of the HPC specimens were analyzed to explore the strength recovery mechanism. After exposure to elevated temperatures, the average compressive strength of samples without silica fume decreased by 49.2 MPa. Subsequent carbonation recuring resulted in a significant recovery of 73.9 MPa in the average compressive strength. This recovery surpassed the original strength for the samples heated to 600 and 800 °C, attributable to the filling and coalescing effects of calcium carbonate polymorphs formed through the carbonation of residual cement particles and β-C 2 S. The samples containing 20% silica fume exhibited the second highest average strength recovery of 34.1 MPa. However, the strength recovery for the samples with 40% silica fume exposed to 800 and 1000 °C was negligible, as the microcracks exceeding 1 μm in width had barely been restored by the carbonation of the low-calcium calcium silicates with low reactivity. Overall, this study presents an exciting future prospect for the labor and cost-effective restoration of thermally damaged concrete structures through the use of carbonation curing. [ABSTRACT FROM AUTHOR]

Safety assessment of post-event damaged structures is vital and significant because it directly affects life security, structural repair, and economic loss, especially in earthquakes. This study applies deep learning (DL) approaches to structural health monitoring and post-earthquake reconnaissance. An image-based procedure for reinforced concrete (RC) component damage recognition and structural safety rapid assessment is established. An RC component mechanical damage image dataset is built first, and comprehensive component damage recognition tasks (CDRTs) are proposed. EfficientNet-V2 is selected as the baseline model to perform CDRTs. The discrete wavelet transform module that integrates frequency information is then proposed to improve the performance and interpretability of the baseline model. Finally, component and structural damage are linked and structural safety rapid assessment methods based on the results of CDRTs are proposed. This study overcomes the limitations of manual inspections and advances the applications of DL techniques in civil engineering by incorporating frequency information. • Proposing a procedure for RC component damage recognition and structural assessment. • Establishing a dataset for RC component mechanical damage images. • Frequency information introduction can assist CNN models in image classification. • Linking the damage type, component damage level, and structural safety state. [ABSTRACT FROM AUTHOR]

• The effect of seawater and sea sand at different stages of preparation on the performance of AWC mortar was systematically studied. • The adverse effect of seawater on the properties of AWC mortar at the molding stage was found for the first time. • The mechanism of the influence of seawater on AWC properties at the molding stage was revealed. Seawater and sea sand are widely used in marine concrete to overcome the shortage of freshwater and river sand. However, the effect of the various salts in seawater and sea sand on the performance of anti-washout underwater concrete (AWC) is unclear. In this study, the influence of seawater and sea sand, as well as the aggressive ions in seawater, on the anti-washout ability, mechanical performance, and microscopic structure of AWC mortar are studied systematically. The AWC mortar molded in seawater has a lower compressive strength even though its indicators of anti-washout ability perform better than that in freshwater. This is because Mg2+ in seawater chemically binds with OH– in cement to form Mg(OH) 2 film absorbed by anti-washout admixture(AWA), which inhibits the release of substances in AWC while also introducing more defects in AWC. This study lays the foundation for promoting the application of seawater and sea sand AWC in marine engineering. [ABSTRACT FROM AUTHOR]

The anti-washout concrete (AWC) made with seawater and sea sand has a limited marine infrastructure application due to its unfavorable properties. Our study proposes an effective performance enhancement method for AWC using silica fume. A comprehensive examination was carried out to investigate the effects of silica fume on AWC's flowability, anti-washout ability, compressive strength, microstructure, permeability, and abrasion resistance, with the AWC prepared with seawater and sea sand, and molded in seawater. It was discovered that 10 % silica fume can most effectively improve the performance of AWC. This enhancement is due to the pore structure refinement realized with C-S-H gel generated from pozzolanic reaction. Exceeding 10 % silica fume content can have a detrimental effect on the slump-flow of mixtures, while only providing marginal improvements in impermeability and compressive strength. The study lays a fundamental groundwork for the wide use of sea-based resources and the application of AWC in marine engineering. • The science behind modification of AWC mortar molded in seawater using silica fume was revealed. • The effects of silica fume on the performance of AWC molded in seawater were thoroughly explored. • The optimal content of silica fume to improve performance of AWC molded in seawater was identified. [ABSTRACT FROM AUTHOR]

Large-scale expansion of urban underground space has led to the accumulation of substantial sediment. Now the primary disposal approach involves long-distance transport followed by dumping in open areas or landfills, incurring excessive deposition and causing landslides. To tackle this concern, a novel processing scheme that transforms sediment into supplementary cementitious material is proposed for preparing sustainable seawater sea sand concrete (SWSSC). Notably, it is determined that this transformed sediment improves cement hydration and reduces cement dosage, achieving a 35% reduction in CO 2 emissions compared to traditional SWSSC with identical strength according to life cycle assessment. Furthermore, it offers the additional benefit of cost-effective. Microanalysis has demonstrated that the recycled sediment reacts with calcium hydroxide and produces secondary calcium-silicate-hydrate gel, contributing to the mechanical properties and decrease in alkalinity of SWSSC. A design model for SWSSC is proposed, focusing on alkalinity, mechanical strength, and environmental benefits. This proposed model enhances application of SWSSC in construction, catering to specialized marine engineering structures, like artificial islands, harbors and offshore structures. This study contributes to a large-scale processing strategy of sediment and provides an economical and green alternative construction material for sustainable infrastructures. [Display omitted] [ABSTRACT FROM AUTHOR]

Using geopolymer concrete (GC) is a technically feasible decarbonization strategy in the cement and concrete industry shown by numerous papers. A key factor determining its commercial application is whether its cost is competitive. However, related study is scarce. In this paper, we present the analysis of GC's CO 2 avoidance cost, the cost incurred to reduce one metric ton of CO 2 emissions. The results show that among the 486 GC mixtures analyzed, only seven yield negative CO 2 avoidance costs, while 379 are even more expensive than capturing CO 2 from cement plants, which is another technically feasible decarbonization strategy and has been evaluated to have a CO 2 avoidance cost of 55 USD/tCO 2 in Chinese demonstration project. Only a few GC mixtures with lower CO 2 avoidance costs will be considered by the industry, and they are associated with low activator dosage and high compressive strength. To quantify this relationship, we introduce the activator index (Ai), which refers to the activator dosage (kg·m−3) required to achieve 1 MPa of compressive strength. The result shows that Ai values below certain thresholds correspond to lower CO 2 avoidance costs and significant emission reductions of GC. This Ai -based criterion helps identify the optimal GC mixture that effectively reduces CO 2 emissions at the lowest possible cost, thereby promoting its commercial application. [Display omitted] • Only 7 of 486 geopolymer concrete (GC) mixtures have negative CO 2 avoidance costs. • CO 2 avoidance costs of most GC in literature exceed CO 2 capture. • The lower activator dosage per MPa strength, the lower CO 2 avoidance cost of GC. [ABSTRACT FROM AUTHOR]

• The performance of concrete under sulfate attack and dry-wet cycles is investigated. • A newly defined index is proposed to describe the progress of sulfate attack. • A novel method is proposed to assess the performance of sulfate-attacked concrete. Sulfate attack is a major cause of concrete durability deteriorations. Mass loss, strength reductions, and expansive strain of concrete specimens are generally used in laboratory testing to identify the resistance of concrete materials to sulfate attack. However, these indicators cannot be directly used to quantitatively predict the bearing capacity of actual concrete structures under sulfate attack. There exists a significant size effect between laboratory and engineering size concrete components. In this study, the durability performance of concrete specimens, exposed to sulfate attack and dry–wet cycles, was investigated. Mass loss, dynamic elastic modulus, compressive strength, and sulfate ions distributions of deteriorated concrete were measured over time. Test results indicate that the newly defined integral area of sulfate ions distributions is a suitable index to describe the non-uniform deteriorations behavior of sulfate–attacked concrete; and a novel method based on the homogenizations theory is proposed to predict the deteriorations level of components of attacked concrete structures, which provides a potential use in assessing the loading capacity of actual concrete structures based on accelerated test results in a laboratory. [ABSTRACT FROM AUTHOR]

• Effect of titanium dioxide and graphene on the durability and mechanical properties of polyether sealant is studied. • Tensile strength after ultraviolet exposure of modified sealant improved by 102%. • Water absorption of graphene-modified sealant reduced by 85.7%. • The working mechanism of sealant with titanium dioxide and graphene has been revealed. The silane-modified polyether sealant is widely applied to fill the gaps between external walls in prefabricated buildings and to bear the deformation of joints. However, the weak tensile strength and poor ultraviolet and moisture resistance of sealant lead to severe degradation, posing threat to the building waterproofing and safety. To address the problems, titanium dioxide and graphene were adopted to improve the mechanical properties and durability of sealant. The tack-free time, tensile properties, ultraviolet resistance, and hydrophobic performance of pristine and modified sealant were investigated and the enhancement and erosive resistance mechanisms of modified sealant were revealed by microscale characterization. Results indicated that modified sealant with low content of titanium dioxide had greater tensile strength and ultraviolet resistance. The crystalline form of titanium dioxide and produced Si-O bond enhanced the ultraviolet resistance. Moreover, the 0.8% graphene-modified sealant possessed superior moisture resistance with 23% increased contact angle. Graphene increased the surface roughness and generated π-conjugated structure, improving sealant hydrophobicity. It is revealed that the enhanced properties were ascribed to the spatial structure of fillers and chemical bond energy. This work provides a novel sealant with high ultraviolet resistance and hydrophobicity, facilitating the development of durable and low-maintenance prefabricated buildings. [ABSTRACT FROM AUTHOR]

• The influences of moisture variations on ion transport and physical crystallization were discussed. • The respective contributions of chemical and physical attack to crystallization pressure were distinguished. • The deterioration in concrete performance was considered under the combined impacts of external sulfate attack and drying–wetting cycles. • A transport-chemical-physical–mechanical model was developed to evaluate and predict damage progression to concrete. When coupled with drying–wetting cycles, the deterioration process of concrete subjected to external sulfate attack (ESA) is significantly accelerated. The impact of moisture variations on ion transport was considered to establish a mass conservation equation with pore solution concentration as the variable. The contributions of chemical and physical attack to crystallization pressure were distinguished, and a bulk modulus reduction function was introduced to ascertain the stiffness deterioration. An ESA model was proposed and verified by comparing it to published experimental data, which could accurately predict the deterioration process of concrete under ESA and drying–wetting cycles. [ABSTRACT FROM AUTHOR]

This study investigates the effects of lime-saturated water and water–CO 2 cyclic recuring on strength recovery of thermally damaged high-performance concretes (HPC). The HPC samples were subjected to elevated temperatures up to 1000 °C in 200 °C increments and underwent recuring. Phase assemblage and distribution, microstructure evolution, and pore structure of the HPC samples were identified. According to the results, recovered compressive strength of the HPC samples with low silica content can surpass their original strength after 600 and 800 °C exposure and recuring. In contrast, HPC with high silica content is unfavorable for strength recovery at temperatures above 800 °C because the low-calcium phases formed have low reactivity. After 1000 °C exposure, only water–CO 2 cyclic recuring coalesces the disintegrated microstructure and recovers the compressive strength. Strength recovery primarily depends on healing the microcracks and large pores rather than the coarsened cement paste. [ABSTRACT FROM AUTHOR]

The damping capacity is one of major concerns for structures under dynamic loads, which significantly affects the safety and service life. Ultra-high performance concrete (UHPC) is a new generation of cementitious material characterized by superior mechanical strength and durability, exhibiting enormous potential in application to innovative structures. However, the weak steel fiber-matrix interface within UHPC leads to insufficient damping performance and poses threats to UHPC structures under extreme dynamic loading conditions. In this paper, various interfacial modulation approaches were investigated to improve static and dynamic damping properties of UHPC, including physical shape and chemical modification of steel fibers, macrofibers and microfibers hybridization. Results show that the interfacial modulation can significantly enhance damping ratio, loss factor and energy dissipation ratio of UHPC, where the chemical modification of steel fibers endows the highest damping ratio. The loss factor and energy dissipation ratio of UHPC reach 0.579 and 0.091 after interfacial modulation, which improved by more than 110% and 100%, respectively. The working mechanisms behind variations of damping performance are attributed to the toughening in interfacial bond and load transfer, leading to improvement in energy dissipating ability of interface. Furthermore, a comprehensive comparison between UHPC and existing vibration damping materials was conducted through multi-criteria analysis from the perspectives of damping performance, mechanical strength, processability and economic benefit, and UHPC with chemical modification of steel fibers exhibits the best overall performance. The findings contribute to inspiring a novel structural vibration control strategy through UHPC with enhanced static and dynamic damping properties for resisting extreme loads. [ABSTRACT FROM AUTHOR]

The development of underground space is an important trend for urban infrastructure in cities supporting socio-economic activities, while it also results in an enormous accumulation of sediment waste, which consumes vast land resources, causes serious environmental problems and endangers public safety. It is urgent to explore pathways of recycling sediment waste with low carbon impact for sustainable infrastructure. This study employed calcination and alkali activators to recycle sediment waste into geopolymer paste. The mechanical properties and working performance of recycled geopolymer paste were investigated and the underlying mechanism of this recycling scheme was revealed with microscale characterizations. Results showed that the compressive strength of recycled geopolymer paste could reach 50 MPa. The environmental impact of geopolymer paste and cement-based paste has been analyzed via life cycle assessment (LCA). Recycled geopolymer paste can save 310 kg CO 2 eq/t of carbon emissions, which is 39% lower than that of cement-based material. Moreover, the multi-criteria approach was adopted to evaluate geopolymer paste and cement paste considering mechanical properties, working performance, carbon emissions, energy consumption and cost, and geopolymer paste exhibits better overall performance. The findings inspire a construction waste management strategy and contribute to low-carbon construction materials for sustainable urban infrastructure. • Sediment waste is recycled into geopolymer paste via calcination and alkali activator. • The optimum mix ratio range of geopolymer paste with sediment waste is determined. • Mechanical and environmental performance of geopolymer paste has been studied. • A sustainable sediment waste management strategy and a low-carbon construction material is inspired. [ABSTRACT FROM AUTHOR]

Low-carbon emission mortar samples were prepared using reactivated cementitious materials (RCMs) produced by calcinating hydrated cement paste with adjusted Ca/Si ratios. Carbonation curing was employed to enhance the cementing capacity of the RCMs and to sequestrate CO 2. The compressive strength, phase assemblage, microstructure, and environmental impacts of the mortars were analyzed. According to the results, the mortar sample produced with the RCM with a 10% addition of silica fume during calcination attained the highest compressive strength (35.3 MPa) after water curing, while higher silica contents were unfavorable because the low-lime calcium silicates that formed have limited water reactivity. Carbonation curing significantly promoted reactions of the RCMs and, thus, the compressive strength of the mortars compared to water curing. The amorphous and metastable calcium carbonates contributed more to the densification of the microstructure than the calcite. From the life cycle assessment, the RCM mortars had a significantly lower impact on global warming potential compared to Portland cement mortars. [Display omitted] [ABSTRACT FROM AUTHOR]