Search

Metal–Organic Polymers (MOPs) have attracted growing attention for lithium-ion battery (LIB) applications due to their merits in orderly ionic transportation and robust structure stability in electrochemical reactions. However, they suffer from poor electronic conductivity. In this work, we apply first-principles density functional theory to explore the potential of three one-dimensional (1D) electrically conductive C6H2S4TM (TM = Fe, Co, and Ni) MOPs with the π–d conjugated coordination as anode materials for Li+ ions storage. Our theoretical results reveal that these 1D MOPs possess a superior theoretical capacity of over 748 mA h g−1. In particular, the 1D C6H2S4Ni MOP shows an exceptional theoretical specific capacity of 1110 mA h g−1 based on the three-electron transferring reaction, which significantly outperforms the traditional graphite-based anode material in LIBs. Moreover, the resonant charge transfer between Ni metal and ligand within the 1D C6H2S4Ni MOP reduces the diffusion energy barrier of the Li atoms when they migrate on the surface of the MOP. The ultrahigh theoretical specific capacity of the C6H2S4Ni MOP predicts that it can be a promising anode material for LIBs. [ABSTRACT FROM AUTHOR]

Aqueous zinc‐based energy storage devices have competitive advantages such as high power density, good safety, and wide source. However, because of the direct touch among zinc anode and aqueous electrolyte, dendrite growth and electrode side reactions are easy to occur in the plating and striping process, which seriously hinders the further development of aqueous zinc‐based energy storage devices. Therefore, it is urgent to solve the above problems to expand the existing energy storage devices. In this work, by adding an imidazo[1,2‐b]pyridazine (IP) electrolyte additive, the dendrites' growth and corrosion on the zinc anode surface could be effectively inhibited by the shielding‐anchoring double effects, which are verified by the comprehensive in situ and ex situ characterization techniques as well as the theoretical calculation support. Accordingly, the IP‐based electrolyte encourages extremely high stable zinc anode (cycling 2200 h at 1 mA cm−2) with high average Coulombic efficiency (98.72%). Moreover, the IP‐based Zn‐V2O5 full battery also exhibits excellent reversible capacity, reaching 160.8 mAh g−1 after 400 cycles at 2 A g−1. Through a straightforward alteration to the Zn anode surface, this study considerably enhances the use of highly stable and secure aqueous zinc‐ion batteries. [ABSTRACT FROM AUTHOR]

Designing efficient multifunctional electrocatalysts for water and urea splitting to produce green hydrogen presents a significant yet worthwhile challenge. Herein, the morphology and electronic structure of cobalt metaphosphate (Co2P4O12) by vanadium (V) doping, resulting in improved electrocatalytic activity and stability for hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and urea oxidation reaction (UOR) are simultaneously regulated. Theory calculations show that V‐doped Co2P4O12 (V‐Co2P4O12) can boost the kinetics of catalytic reactions by optimizing the d‐band center of Co atoms and the binding strength of intermediates, as well as enhancing the density of states. Moreover, the doping of V into Co2P4O12 crystalline structure benefits the formation of a thicker amorphous layer during the catalytic process, which could enhance its alkaline corrosion resistance and stability. Additionally, the multilevel nanostructures of V‐Co2P4O12 provide rich active sites for catalytic reactions. As a result, a two‐electrode electrolyzer assembled by V‐doped Co2P4O12 delivers low voltages for overall water and urea splitting. The superior performance suggests that the proposed V‐doping strategy is a promising way to regulate electrocatalytic activity for catering to green electrocatalytic applications. [ABSTRACT FROM AUTHOR]

BiVO4 is one of the most promising photoanode materials for photoelectrochemical (PEC) solar energy conversion, but it still suffers from poor photocurrent density due to insufficient light‐harvesting efficiency (LHE), weak photogenerated charge separation efficiency (ΦSep), and low water oxidation efficiency (ΦOX). Herein, we tackle these challenges of the BiVO4 photoanodes using systematic engineering, including catalysis engineering, bandgap engineering, and morphology engineering. In particular, we deposit a NiCoOx layer onto the BiVO4 photoanode as the oxygen evolution catalyst to enhance the ΦOX of Fe‐g‐C3N4/BiVO4 for PEC water oxidation, and incorporate Fe‐doped graphite‐phase C3N4 (Fe‐g‐C3N4) into the BiVO4 photoanode to optimize the bandgap and surface areas to subsequently expand the light absorption range of the photoanode from 530 to 690 nm, increase the LHE and ΦSep, and further improve the oxygen evolution reaction activity of the NiCoOx catalytic layer. Consequently, the maximum photocurrent density of the as‐prepared NiCoOx/Fe‐g‐C3N4/BiVO4 is remarkably boosted from 4.6 to 7.4 mA cm−2. This work suggests that the proposed systematic engineering strategy is exceptionally promising for improving LHE, ΦSep, and ΦOX of BiVO4‐based photoanodes, which will substantially benefit the design, preparation, and large‐scale application of next‐generation high‐performance photoanodes. [ABSTRACT FROM AUTHOR]