Search

Purpose This study aimed to evaluate the value of fat-suppressed T2-weighted imaging (FS-T2WI) for predicting short-term pain relief after polidocanol sclerotherapy for painful venous malformations (VMs) in the extremities. Materials and methods This retrospective study included patients with painful VMs in the extremities between October 2014 and September 2021, had their first sclerotherapy without history of surgical therapy, and underwent magnetic resonance imaging before sclerotherapy. Pain relief was assessed 2 months after 3% polidocanol sclerotherapy and was categorized as follows: progression, no change, partial relief, or free of pain. The associations between pain relief and imaging features on FS-T2WI were analyzed. Results The study included 51 patients. The no change, partial relief, and free of pain groups included 6 (11.8%), 25 (49.0%), and 20 (39.2%) patients, respectively. No patient experienced progressive pain. The lesion diameter was ≤ 50 mm in 13 (65.0%) patients in the free of pain group, whereas it was > 50 mm in all patients in the no change group (p = 0.019). The lesions showed well-defined margin in 15 (75.0%) patients in the free of pain group, whereas they showed ill-defined margin in 5 (83.3%) patients in the no change group (p = 0.034). The most common morphological type was cavitary in the free of pain group (14 [70.0%] patients), whereas there was no patient with cavitary type lesion in the no change group (p = 0.003). Drainage vein was demonstrated in 6 (100%), 22 (88.0%), and 11 (55.0%) patients in the no change, partial relief, and free of pain group, respectively (p = 0.011). Conclusion A lesion size of 50 mm or less, a well-defined margin, a cavitary type, and no drainage vein on FS-T2WI were significant features for predicting short-term pain relief after polidocanol sclerotherapy for painful VMs in the extremities.

Microplastics (MPs) in the ocean have been widely recognized as causing global marine environmental problems. To gain a quantitative and comprehensive understanding of oceanic MP contamination, detailed numerical Lagrangian particle tracking experiments were conducted to evaluate the regional oceanic transport and dispersal of MPs in the South China Sea (SCS) derived from three major rivers, Pearl (China), Mekong (Vietnam), and Pasig (the Philippines), which are known to discharge large amounts of plastic waste into the SCS. As previous field surveys have suggested, MP contamination spreads from the surface to the deeper ocean in the water column, we thus considered three types of MPs: (1) positively buoyant (light) MPs, (2) positively buoyant (light) MPs with random walk diffusion, and (3) full 3-D tracking of non-buoyant MPs that are passively transported by ambient currents. Transport patterns of these MPs from the three rivers clearly showed the intra-annual variability associated with seasonally varying circulations driven by the Asian monsoons in the SCS. Many MPs floating during the prevailing southwest monsoon are transported to the northwest Pacific Ocean and the East China Sea through the Luzon Strait and the Taiwan Strait to form MP hotspots. Non-buoyant MPs are broadly transported from the surface layer to depths of approximately 100 m or deeper, where in situ observations are rare. In addition, the buoyant MPs drifting on the continental shelf originating from southern China tend to be pushed toward the shore and beached by northward wind-induced currents more pronouncedly than the non-buoyant MPs. Therefore, the river-derived MPs to the SCS were found to serve as sources to adjacent basins and oceans, to be distributed not only in the upper layer but also in the abyssal ocean (non-buoyant MPs), and to be transported to the shores (buoyant MPs).

Accidental leakage of radionuclides from the Fukushima Nuclear Power Plant (FNPP1) took place in the aftermath of the catastrophic tsunamis associated with the Great East Japan Earthquake that occurred on March 11, 2011. Significant amount of radionuclides released into the atmosphere were reportedly transported and deposited on land located near FNPP1. The Niida River, Fukushima, Japan, has been recognized as a terrestrial source of highly contaminated suspended radiocesium adhering to sediment particles in the ocean through the river mouth as a result of hydrological processes. Remaining scientific questions include the oceanic dispersal and inventories of the sediments and suspended radiocesium in the ocean floor derived from the Niida River. Complementing limited in situ data, we developed a quadruple nested 3D ocean circulation and sediment transport model in an extremely high-resolution configuration to quantify the transport processes of the suspended radiocesium. Particularly, we investigated the storm and subsequent floods associated with Typhoon 201326 (Wipha) that passed off the Fukushima coast in October 2013, and subsequently promoted precipitation to a considerable extent and associated riverine freshwater discharge along with sediment outfluxes to the ocean. Using in situ bed sediment core data obtained from regions near the river mouth, we conducted a quantitative assessment of the accumulation and erosion of the sediments and explored the resultant suspended radiocesium distribution around the river mouth and nearshore areas along the Fukushima coast. We identified three major accumulative areas, near the river mouth within an area

The topography of the seafloor is essential for determining physical phenomena such as ocean currents, favorable habitats for marine organisms, optimal vessel navigation, and so on. Prevailing currents and waves, as well as associated shear stresses acting on the ocean floor, are responsible for the formation of typical topographic features including sea caldrons and sandbanks through erosion of bedrock and sediments and their deposition processes. In the Seto Inland Sea (SIS), the most extensive semi-enclosed estuary in Japan, tidal currents affect pronouncedly the formation of seafloor topographic features; however, they have not been fully studied, particularly from a hydrodynamic viewpoint. This study aims to understand bathymetric formation under the predominance of tidal currents in the SIS. A 3-D high-resolution SIS circulation model based on the JCOPE2-ROMS system in a triple-nested configuration was utilized to examine the detailed hydrodynamic processes for the topography formations. A high correlation between the bottom shear stress and the scour depth of the erosive areas was observed, demonstrating that local tidal forcing has continuously been exerted on the seafloor to erode. A diagnostic sediment budget analysis was then conducted for sediments typical of the SIS, that is, gravel, sand, and clay, using the modeled circulation field. The horizontal divergence of the residual flows indicates consistency between divergence (convergence) and erosion (deposition). The sediment budget model also shows that these sediments are generally transported from deep to shallow areas in eroded terrains to form deposited terrains fringing the eroded terrains, whereas sedimentation tendency differs largely from location to location.

This study investigates the generation mechanism and influence of the whirlpools in the Naruto Strait on the surrounding marine environment using state-of-the-art high-resolution numerical ocean circulation modeling in a quadruple nested configuration. The Naruto whirlpools is recognized as an extraordinary seascape that the local governments and the citizens seek to register as a world natural heritage site. We found that the pronounced pressure gradient force associated with the meridional surface elevation difference was induced by a phase difference of two bifurcating major tidal waves. These waves originate from the Kitan Strait, and ultimately produce intense tidal currents at the Naruto Strait. One branch of the tidal waves propagates counter-clockwise along Awaji Island through the Akashi Strait, while the other occurs directly from the Kii Channel. As such, the whirlpool emerges as a large number of sub-mesoscale eddies, primarily due to the horizontal shear instability of tidal currents energized at the narrow topography between two headlands that extend into the strait. A dipole of overturning vertical circulations appears underneath the whirlpools with convergent downward transport at the strongest tidal current near the center of the strait; this causes efficient vertical mixing. This three-dimensional non-linear mixing promotes a time-averaged southeastward mass transport that extracts water and materials from the Harima-nada Sea into the Kii Channel.

Coral bleaching has recently occurred extensively over the world’s oceans, primarily due to high water temperatures. Mesophotic corals that inhabit at depths of approximately 30–150 m are expected to survive during bleaching events and to reseed shallow water corals afterward. In particular, in Okinawa, Japan, mesophotic coral ecosystems (MCEs) have been reported to serve as a refuge to preserve genotypic diversities of bleaching-sensitive corals. Connectivity of larval populations between different habitats is a key element that determines the area to be conserved for desirable coral ecosystems. Coral larvae generally behave passively to the surrounding currents and are transported by the advective and dispersive effects of ambient ocean currents. Thus, numerical ocean circulation models enable us to quantify connectivity with detailed spatiotemporal network structures. Our aim in this study is to quantify the short-distance and vertical connectivity of coral larvae in reef areas on the northwest coast of Okinawa Main Island. For the reason that both short-distance and vertical larval transport are influenced by complex nearshore topography, a very high-resolution 3-D circulation model is required. Therefore, we developed a quadruple nested high-resolution synoptic ocean model at a lateral spatial resolution of 50 m, coupled with an offline 3-D Lagrangian particle-tracking model. After validation of the developed model, short-distance horizontal coral connectivity across reef areas on the northwest coast was successfully evaluated. Furthermore, a series of Lagrangian particle release experiments were conducted to identify the vertical coral migration and 3-D connectivity required for the preservation of MCEs. The model revealed that coral larvae released from the semi-enclosed areas tended to remain near the source area, whereas they were diffused and dispersed gradually with time. The mesophotic corals were dispersed vertically to the deeper zone below the mixed layer, while upward transport occurred to induce the mesophotic corals to emerge near the surface, under the influence of the surface mixed layer. The model results solidly indicated significant connectivity between MCEs and shallow coral ecosystems.

Plastic waste is currently one of the biggest global environmental issues. To gain the comprehensive understanding of oceanic microplastic contamination as a key global environmental problem, Lagrangian particle tracking experiments were conducted to evaluate the transport of microplastics (MPs) derived from the four major rivers that have been known to discharge large amounts of plastic waste into the South China Sea (SCS). We carried out two types of experiments using a pre-computed 3D current climatological oceanic model: (1) 2D tracking of MP particles placed at the surface to represent positively buoyant (light) MPs, and (2) fully 3D tracking of neutrally buoyant MP particles that are passively transported by ambient current. The seasonally varying monsoons in the SCS were found to provoke strong seasonal variability in the river-derived MP transport. It was found that a large number of MPs, especially from south China, are transported to the East China Sea in the seasons when the southwesterly monsoon prevails. Moreover, the difference in the density of MPs substantially affects their oceanic transport patterns. The buoyant MPs accumulated near the surface tend to be transported toward nearshore areas by wind-driven Ekman currents.

We developed a three-dimensional prognostic oceanic dispersion model that accounted for the phase transfer of radionuclides between seawater, suspended particles, and seabed sediments with multiscale grain sizes. A detailed hindcast of 137Cs in the seabed sediment off the Fukushima coast was conducted to investigate the transfer mechanism of dissolved 137Cs derived from the Fukushima Daiichi Nuclear Power Plant (FNPP1) accident toward the seabed sediment. Extensive model-data comparison demonstrated that the model could satisfactorily reproduce the oceanic structure and 137Cs concentrations in the seawater and seabed sediment. The model successfully reproduced the major features of the observed spatial variation of the 137Cs activities in the sediment, which represented more than 90% of the sedimentary radiocesium existing in the coastal area off Fukushima several months after the accident. Shear stress associated with the resuspension of the seabed sediment was induced by waves near the shore and by current velocity offshore of the study area. The adsorption of 137Cs on the seabed sediment differed depending on the particle size, with adsorption on clay being the most substantial. The distribution of 137Cs in the sediment off the Fukushima coast was formed mainly owing to adsorption from the dissolved phase by June 2011, when the impact of the direct oceanic 137Cs release from FNPP1 was remarkable. After June 2011, seabed sediment became a source of 137Cs released to the seawater owing to resuspension with and desorption from the sediment.