Search

Recently, C4F7N mixtures have attracted attention as a promising SF6 alternative due to their low global warming potential and excellent electrical performance. In this study, we introduce a newly built experimental setup for pulsed Townsend measurements as well as the physical model for the acquisition of electron swarm parameters. The effective ionization rate coefficients, electron drift velocity, and density-normalized longitudinal diffusion coefficients in C4F7N and its mixtures with CO2 and N2 were obtained. The reduced critical electric field for pure C4F7N at 100 Pa is determined to be 1002 Td, while it decreases with increasing pressure because of the effect of ion kinetics during the discharge process. C4F7N shows good synergism with CO2 and N2. To have a dielectric strength equivalent to that of SF6, the mixing ratio of C4F7N in its mixtures with CO2 and N2 should be 18% and 12%, respectively. The results provide fundamental data for modeling discharges in C4F7N and its mixtures. [ABSTRACT FROM AUTHOR]

The gas mixture CO2–O2 has been considered as an insulation and arc-quenching medium in gas-insulated switchgears. In this paper, the dielectric breakdown properties of CO2–O2 mixtures at different O2 concentrations and gas pressures were studied theoretically by considering ion kinetics in a spatial–temporal growth avalanche model. A kinetic scheme that includes all the main reactions likely to occur in CO2–O2 mixtures is presented. An improved method to calculate the dielectric strength of the gas mixture is developed, based on an avalanche model that considers both spatial growth and temporal processes. Next, the reaction rates of ionization, attachment, detachment and ion conversion, the effective ionization Townsend coefficient αeff/N, and reduced critical electric field strength (E/N)cr in CO2–O2 mixtures at different mixing ratios and gas pressures are analyzed in detail. Finally, a pulsed Townsend experiment is performed to verify the validity and accuracy of the calculation method. Based on this, one detachment reaction rate is modified to yield more accurate results. Better consistency between the results and the experimental values supports the validity of the kinetic system, reaction rates, and the improved calculation method. [ABSTRACT FROM AUTHOR]

The integration of distributed generation (DG) into the decentralized access of the distribution network transforms the existing structure into an active distribution network. The alteration in fault characteristics poses significant challenges to the coordinated operation of relay protection. Fault location within the distribution network plays a vital role in facilitating fault recovery and enhancing the resilience of the power system. It proves instrumental in improving the network's ability to withstand extreme disasters, thereby enhancing the reliability of power distribution. Therefore, this paper provides a detailed analysis of the voltage fault components occurring during various fault types within an active distribution network. Building upon the identified characteristics of voltage fault components, a novel approach for the longitudinal protection of active distribution networks is proposed. This method involves comparing the calculated values of voltage fault components with their actual values. The proposed approach is applicable to various fault scenarios, including short-circuit faults, line break faults, and recurring faults. It exhibits advantages such as insensitivity to the penetration of distributed power supplies and robustness in withstanding transition resistance. The simulation results validate the effectiveness of the proposed method, affirming its applicability to diverse protection requirements within active distribution networks. [ABSTRACT FROM AUTHOR]

The perfluoronitrile C4F7N is considered a promising SF6-alternative in high-voltage gas-insulated apparatus, thanks to its high dielectric strength and low global warming potential. However, a complete and consistent set of electron-neutral collision cross-sections of C4F7N is still lacking, which hinders relevant plasma modeling. In this contribution, the available electron-neutral collision cross-sections of C4F7N are first compiled and assessed. The initial cross-sections are adjusted iteratively by the electron swarm method to determine a complete and self-consistent cross-section set of C4F7N for the first time. The set is validated by a systematic comparison of electron swarm parameters between Boltzmann equation analysis and experimental measurements in pure C4F7N as well as C4F7N/N2 and C4F7N/Ar mixtures. The proposed cross-section set of C4F7N will be made available to the community in the LXCat database. It will be of particular importance for applications with an emphasis on the discharge mechanisms of this novel gas. [ABSTRACT FROM AUTHOR]