Search

Local oxidative stress in diseases or injury severely hinders cell homeostasis and organ regeneration. Antioxidant therapy is an effective strategy for oxidative stress treatment. Biomaterials with good biocompatibility and reactive oxygen species (ROS) scavenging ability are good choices for antioxidant therapeutics. However, there are few natural biomaterials that are identified with both biocompatibility and strong antioxidant activity. Here, we show, for the first time, that silk fibroin (SF) is a strong antioxidant, which can eliminate ROS in both cells and zebrafish. We further demonstrate that the β-sheet structures turn into a random coiled structure when SF is treated with hydrogen peroxide. The content of β-sheet structures can be increased by heating, thus enhancing the antioxidation properties of SF. Therefore, SF can serve as a good antioxidant biomaterial for therapeutics, and its β-sheet structure-based antioxidation mechanism provides a novel theoretical basis, which could be a new cue for more antioxidant biomaterial discovery and identification.

In this paper, Cu thin films were deposited on Si (100) substrates by the high−power impulse magnetron sputtering (HiIPMS) technique, and the effects of different duty cycles (from 2.25% to 5.25%) on the plasma discharge characteristics, microstructure, and electrical properties of Cu thin films were investigated. The results of the target current test show that the peak target current remains stable under 2.25% and 3% duty cycle conditions. Under the conditions of a 4.5% and 5.25% duty cycle, the target peak current shows a decreasing trend. The average power of the target shows a rising trend with the increase in the duty cycle, while the peak power of the target shows a decreasing trend with the increase in the duty cycle. The results of OES show that with the increase in the duty cycle, the total peak intensity of copper and argon emissions shows an overall increasing trend. The duty cycle from 3% to 4.5% change in copper and argon emission peak total intensity change is not obvious. The deposition rate and surface morphology of the copper film were investigated by scanning electron microscopy, and the deposition rate of the copper film increased with the increase in the duty cycle, which was mainly due to the increase in the average power. The surface roughness of the copper film was evaluated by atomic force microscopy. X−ray diffraction (XRD) was used to analyze the grain size and texture of the Cu film, and the results showed that the average grain size of the Cu film increased from 38 nm to 59 nm on the (111) and (200) crystal planes. Four−probe square resistance test copper film resistivity in 2.25%, 3% low duty cycle conditions of the copper film resistivity is generally higher than 4.5%, 5.25% high duty cycle conditions, the copper film resistivity shows the trend of change is mainly affected by the copper film grain size and the (111) face of the double effect of the optimal orientation. The lowest resistivity of the copper film measured under the 4.5% duty cycle condition is 1.7005 μΩ·cm, which is close to the intrinsic resistivity of the copper film of 1.67 μΩ·cm.

High-power pulse magnetron sputtering is a new type of magnetron sputtering technology that has advantages such as high peak power density and a high ionization rate compared to DC magnetron sputtering. In this paper, we report the effects of different pulse widths on the current waveform and plasma spectrum of target material sputtering, as well as the structure and properties of Cu films prepared under the same sputtering voltage and duty cycle. Extending the pulse width can make the sputtering enter the self-sputtering (SS) stage and improve the ion quantity of sputtered particles. The Cu film prepared by HiPIMS with long pulse width has higher bond strength and lower electrical resistivity compared to the Cu film prepared by short pulse width. In terms of microstructure, the Cu film prepared by HiPIMS with the long pulse width has a larger grain size and lower micro-surface roughness. When the pulse width is bigger than 200 μs, the microstructure of the Cu film changes from granular to branched. This transformation reduces the interface on the Cu film, further reducing the resistivity of the Cu film. Compared to short pulses, long pulse width HiPIMS can obtain higher quality Cu films. This result provides a new process approach for preparing high-quality Cu films using HiPIMS technology.

Cadmium (Cd) is a toxic element that endangers crop growth and affects food safety and human health. Therefore, the study of Cd mitigation technology is important. Ultrasonic treatment can improve crop growth and enhance their ability to resist various abiotic stresses. In this study, the effect of ultrasonic treatment on alleviating sugarcane Cd stress was studied in a barrel experiment using sugarcane varieties ‘ROC22’ and ‘LC05‐136’ as test materials. Sugarcane buds without ultrasonic treatment and with ultrasonic treatment (20–40 kHz mixed frequency ultrasound for 2 min, dry treatment) were planted in soil with Cd contents of 0, 50, 100, 250, and 500 mg·kg−1. Compared with non-ultrasonic treatment, Ultrasonic treatment significantly increased the activities of antioxidant enzymes in sugarcane, significantly increased the content of osmoregulation substances, significantly reduced the content of superoxide anion (the highest decreases reached 11.55%) and malondialdehyde (the highest decreases reached 20.59%), and significantly increased the expression level of metallothionein (MT)-related genes, with the expression of ScMT1 increased by 8.80–37.49% and the expression of ScMT2–1–5 increased by 1.55–69.33%. In addition, ultrasonic treatment significantly reduced the Cd contents in sugarcane roots, stems, leaves, bagasse, and juice (the highest reduction in Cd content was 49.18%). In general, ultrasonic treatment regulated the metabolism of reactive oxygen species and MT-related gene expression in sugarcane, increased the Cd tolerance of sugarcane, promoted photosynthesis in sugarcane leaves, improved root morphology, enhanced sugarcane growth, and increased cane and sugar yield.

Objective: We aimed to explore the relationship between peripheral blood circulating tumor cells (CTCs) and the expression of Claudin-4 in patients with breast cancer, and further explore the potential impact on clinical prognosis and risk assessment.Methods: We classified and enumerated circulating tumor cells in the blood of breast cancer patients by CTC-enriched in situ hybridization and the detection of Claudin-4 expression by immunohistochemistry. We carried out an analysis of the correlation between the two and the comparison of their impact on clinical parameters and prognosis.Results: There were 38 patients with a low expression of Claudin-4 and 27 patients with a high expression of Claudin-4. Compared with Claudin-4 low-expression patients, the number of CTCs was higher in patients with high Claudin-4 expression (11.7 vs. 7.4, p < 0.001). High Claudin-4 expression was associated with a lower count of epithelial CTCs (E-CTCs) (3.4 vs. 5.0, p = 0.033), higher counts of mesenchymal CTCs (M-CTC) (4.4 vs. 1.1, p < 0.001), and epithelial/mesenchymal CTCs (E/M-CTCs) (4.0 vs. 3.5, p = 0.021). The intensity of Claudin-4 was positively correlated with CTC (rs = 0.43, p = 0.001). Multivariate COX regression analysis showed that CTC counts (HR = 1.3, p < 0.001), Claudin-4 (HR = 4.6, p = 0.008), and Lymphatic metastasis (HR = 12.9, p = 0.001) were independent factors for poor prognosis. COX regression of CTC classification showed that epithelial/mesenchymal CTCs (E/M-CTC) (HR = 1.9, p = 0.001) and mesenchymal CTCs (M-CTC) (HR = 1.5, p = 0.001) were independent influencing factors of adverse reactions in breast cancer patients.Conclusion: The number of CTC in breast cancer is positively correlated with the expression of Claudin-4. High CTC counts and a high proportion of M-CTCs correlated with Claudin-4 expression. CTC counts and Claudin-4 expression were independent predictors of poor prognosis in breast cancer patients.

For marine and coastal engineering, construction resources have become scarce due to a limited local supply. Sea sand geopolymer-based recycled concrete (SSGRC) is an innovative cementitious material known for its eco-friendly benefits and corrosion resistance. This study explores the mechanical properties of SSGRC. The influences of the replacement rate of mineral slag, alkali activator concentrations, fine aggregate types, and curing ages on the compression strength of SSGRC were studied. The failure mechanism was analyzed using the failure patterns and compressive stress–strain curves. The results show that sea sand had a positive effect on geopolymer-based material. The SSGRC reached peak strength with an alkali activator concentration of 10 mol/L and a mineral slag replacement rate of 60%. The maximum stress and strain increased with an increasing curing age. The ratios of strength to the peak value were 55% and 85% after 1 day and 7 days, respectively. Using SEM, in the last hydration stage, the C-(A)-S-H gel was formed with a dense microstructure, and the geopolymer exhibited a favorable bonding performance. The constitutive models describing the complete stress–strain relationship under compression were developed.

Ammonia, as one of the primary water pollutants in aquaculture, has been shown to induce a wide range of ecotoxicological effects on aquatic animals. In order to investigate the antioxidant and innate immune responses in crustaceans disrupted by ammonia, red swamp crayfish (Procambarus clarkii) were exposed to 0, 15, 30, and 50 mg/L total ammonia nitrogen for 30 d, the alterations of antioxidant responses as well as innate immunity were studied. The results showed that the severity of hepatopancreatic injury were aggravated by the increasing ammonia levels, which were mainly characterized by tubule lumen dilatation and vacuolization. The swollen mitochondria and disappeared mitochondria ridges suggested that oxidative stress induced by ammonia targets the mitochondria. Concurrently, enhanced MDA levels, and decreased GSH levels as well as the decreased transcription and activity of antioxidant enzymes, including SOD, CAT, and GPx were noticed, which suggested that high concentrations of ammonia exposure induce oxidative stress in P. clarkii. Furthermore, a significant decrease of the hemolymph ACP, AKP, and PO along with the significant downregulation of immune-related genes (ppo, hsp70, hsp90, alf1, ctl) jointly indicated that ammonia stress inhibited the innate immune function. Our findings demonstrated that sub-chronic ammonia stress induced hepatopancreatic injury and exert suppressive effects on the antioxidant capacity as well as innate immunity of P. clarkii. Our results provide a fundamental basis for the deleterious effects of ammonia stress on aquatic crustaceans.

Chromium Nitride (CrN) coatings have widespread utilization across numerous industrial applications, primarily attributed to their excellent properties. Among the different methods for CrN coating synthesis, direct current magnetron sputtering (DCMS) has been the dominant technique applied. Nonetheless, with the expanded applications of CrN coatings, the need for enhanced mechanical performance is concurrently escalating. High-power impulse magnetron sputtering (HiPIMS), an innovative coating deposition approach developed over the past three decades, is gaining recognition for its capability of yielding coatings with superior mechanical attributes, thereby drawing significant research interest. Considering that the mechanical performance of a coating is fundamentally governed by its microstructural properties, a comprehensive review of CrN coatings fabricated through both techniques is presented. This review of recent literature aims to embark on an insightful comparison between DCMS and HiPIMS, followed by an examination of the microstructure of CrN coatings fabricated via both techniques. Furthermore, the exploration of the underlying factors contributing to the disparities in mechanical properties observed in CrN coatings is revealed. An assessment of the advantages and potential shortcomings of HiPIMS is discussed, offering insight into CrN coating fabrication.

In wheat production, appropriate flowering time and ideal plant architecture are the prerequisites for high grain yield. Alternative splicing (AS) is a vital process that regulates gene expression at the post-transcriptional level, and AS events in wheat have been found to be closely related to grain-related traits and abiotic stress tolerance. However, AS events and their biological roles in regulating flowering time and plant architecture in wheat remain unclear. In this study, we report that TaNAK1 undergoes AS, producing three splicing variants. Molecular characterization of TaNAK1 and its splicing variants demonstrated that all three protein isoforms have a conserved NB-ARC domain and a protein kinase domain, but the positions of these two domains and the length of the protein kinase domains are different among them, implying that they may have different three-dimensional structures and therefore have different functions. Further investigations showed that the two splicing variants of TaNAK1, TaNAK1.1 and TaNAK1.2, exhibited different expression patterns during wheat growth and development, while the other one, TaNAK1.3, was not detected. Subcellular localization demonstrated that TaNAK1.1 was mainly localized in the cytoplasm, while TaNAK1.2 was localized in the nucleus and cytoplasm. Both TaNAK1.1 and TaNAK1.2 exhibit protein kinase activity in vitro. Ectopic expression of TaNAK1.1 and TaNAK1.2 in Arabidopsis demonstrated that these two splicing variants play opposite roles in regulating flowering time and plant architecture, resulting in different seed yields. TaNAK1.2 positive regulates the transition from vegetative to reproductive growth, plant height, branching number, seed size, and seed yield of Arabidopsis, while TaNAK1.1 negatively regulates these traits. Our findings provide new gene resource for regulating flowering time and plant architecture in crop breeding for high grain yield.

Red swamp crayfish (Procambarus clarkii) has increasingly become a high-value freshwater product in China. During the intensive cultivation, excessive ammonia exposure is an important lethal factor of crayfish. We investigated the toxic effects and mechanisms of ammonia on crayfish at two different developmental stages. A preliminary ammonia stress test showed a 96-h LC50 of 135.10 mg/L and 299.61 mg/L for Stage_1 crayfish (8.47 ± 1.68 g) and Stage_2 crayfish (18.33 ± 2.41 g), respectively. During a prolonged ammonia exposure (up to 96 h), serum acid phosphatase and alkaline phosphatase showed a time-dependent decrease. Histological assessment indicated the degree of hepatopancreatic injury, which was mainly characterized as tubule lumen dilatation, degenerated tubule, vacuolization and dissolved hepatic epithelial cell, increased with exposure time. Enhanced malondialdehyde level and reduced antioxidant capacity of hepatopancreas were also observed. The mRNA expression and activity of catalase and superoxide dismutase showed an initial up-regulation within 24 h, and then gradually down-regulated with the exposure time. In the post-treatment recovery period, the Stage_2 crayfish exerted a stronger antioxidant and detoxification capacity than that of the Stage_1 crayfish, and thus quickly recovered from the ammonia exposure. Our findings provide a further understanding of the adverse effects of ammonia stress and suggest guidelines for water quality management during crayfish farming.

BackgroundAlthough N6-methyladenosine (m6A) RNA methylation is the most abundant reversible methylation of mRNA, which plays a critical role in regulating cancer processing, few studies have examined the role of m6A in nonsmall-cell lung cancer-derived cancer stem-like cells (CSCs).MethodsCSCs were enriched by culturing NSCLC cells in a serum-free medium, and stem factors, including CD24, CD44, ALDH1, Nanog, Oct4, and Sox2 were detected by Western blot. ALKBH5 expression was measured by employing a tissue array. Global m6A methylation was measured after ALKBH5 knockdown. Malignances of CSCs were detected by performing CCK-8 assay, invasion assay, cell cycle analysis, and tumor formation in vitro and in vivo.Resultsm6A demethylase ALKBH5 is highly expressed in CSCs derived from NSCLC. Knockdown of ALKBH5 increased global m6A level, and also increased E-cadherin, decreased stem hallmarkers, Nanog and Oct4, and inhibited stemness of CSCs. In lung carcinoma, ALKBH5 is found to be positively correlated with p53 by using Gene Expression Profiling Interactive Analysis (GEPIA) online tool. P53 transcriptionally regulates ALKBH5 and subsequently regulates the global m6A methylation level. Knockdown of p53 or inhibition of p53’s transcriptional activity by addition of its specific inhibitor PFT-α decreased expression of ALKBH5 and CSCs’ malignancies, including proliferation, invasion, and tumor formation ability, indicating that p53 may partially regulate CSC’s malignancies via ALKBH5. Furthermore, we also found p53 transcriptionally regulates PRRX1, which is consistent with our previous report.ConclusionCollectively, our findings indicate the pivotal role of ALKBH5 in CSCs derived from NSCLC and highlight the regulatory function of the p53/ALKBH5 axis in modulating CSC progression, which could be a promising therapeutic target for NSCLC.

Waterborne ammonia is becoming one of the most notorious pollutants in aquatic habitats and has been shown to induce a range of ecotoxicological effects on aquatic animals. High ammonia concentrations occur mainly in intensive aquaculture systems, and effective wastewater treatment and agricultural systems are necessary to treat excessive nitrogenous compounds. Ammonia can enter aquatic decapod crustaceans through their gills, thereby reducing the oxygen-carrying capacity of blood cells and damaging the structures of organs such as the gills and hepatopancreas. This ultimately results in oxidative stress, immunotoxicity, and high mortality. Crustaceans have the ability to exert detoxification functions against ammonia stress by regulating the permeation of ammonia and related nitrogenous compounds through membranes. To the best of our knowledge, a comprehensive review of the acute toxicity of ammonia to crustaceans is lacking. The present review focuses on the literature on the problems and mechanisms concerning ammonia-induced acute toxicity and aims to synthesize the knowledge of the relationship between ammonia stress and defense responses in crustaceans (mainly shrimp and crabs). This review also emphasizes the uptake, elimination, and detoxification of ammonia in crustaceans.

The growth of leaves is subject to strict time regulation. Several genes influencing leaf growth have been identified, but little is known about how genes regulate the orderly initiation and growth of leaves. Here, we demonstrate that TaKLU/TaCYP78A5 contributes to a time regulation mechanism in leaves from initiation to expansion. TaKLU encodes the cytochrome P450 CYP78A5, and its homolog AtKLU has been described whose deletion is detrimental to organ growth. Our results show that TaKLU overexpression increases leaf size and biomass by altering the time of leaf initiation and expansion. TaKLU-overexpressing plants have larger leaves with more cells. Further dynamic observations indicate that enlarged wheat leaves have experienced a longer expansion time. Different from AtKLU inactivation increases leaf number and initiation rates, TaKLU overexpression only smooths the fluctuations of leaf initiation rates by adjusting the initiation time of local leaves, without affecting the overall leaf number and initiation rates. In addition, complementary analyses suggest TaKLU is functionally conserved with AtKLU in controlling the leaf initiation and size and may involve auxin accumulation. Our results provide a new insight into the time regulation mechanisms of leaf growth in wheat.