Search

The effects of optical feedback on a terahertz (THz) quantum-cascade metasurface vertical-external-cavity surface-emitting laser (QC-VECSEL) are investigated via self-mixing. A single-mode 2.80 THz QC-VECSEL operating in continuous-wave is subjected to various optical feedback conditions (i.e., feedback strength, round-trip time, and angular misalignment) while variations in its terminal voltage associated with self-mixing are monitored. Due to its large radiating aperture and near-Gaussian beam shape, we find that the QC-VECSEL is strongly susceptible to optical feedback, which is robust against misalignment of external optics. This, in addition to the use of a high-reflectance flat output coupler, results in high feedback levels associated with multiple round-trips within the external cavity-a phenomenon not typically observed for ridge-waveguide QC-lasers. Thus, a new theoretical model is established to describe self-mixing in the QC-VECSEL. The stability of the device under variable optical feedback conditions is also studied. Any mechanical instabilities of the external cavity (such as vibrations of the output coupler), are enhanced due to feedback and result in low-frequency oscillations of the terminal voltage. The work reveals how the self-mixing response differs for the QC-VECSEL architecture, informs other systems in which optical feedback is unavoidable, and paves the way for QC-VECSEL self-mixing applications.

Design strategies for improving terahertz (THz) quantum cascade lasers (QCLs) in the 5-6 THz range are investigated numerically and experimentally, with the goal of overcoming the degradation in performance that occurs as the laser frequency approaches the Reststrahlen band. Two designs aimed at 5.4 THz were selected: one optimized for lower power dissipation and one optimized for better temperature performance. The active regions exhibited broadband gain, with the strongest modes lasing in the 5.3-5.6 THz range, but with other various modes observed ranging from 4.76 to 6.03 THz. Pulsed and continuous-wave (cw) operation is observed up to temperatures of 117 K and 68 K, respectively. In cw mode, the ridge laser has modes up to 5.71 THz - the highest reported frequency for a THz QCL in cw mode. The waveguide loss associated with the doped contact layers and metallization is identified as a critical limitation to performance above 5 THz.

Optical injection locking of a metasurface quantum-cascade (QC) vertical-external-cavity surface-emitting laser (VECSEL) is demonstrated at 2.5 THz using a Schottky diode frequency multiplier chain as the injection source. The spectral properties of the source are transferred to the laser output with a locked linewidth of ∼1 Hz, as measured by a separate subharmonic diode mixer, and a locking bandwidth of ∼300 MHz is achieved. The large locking range is enabled by the microwatt power levels available from modern diode multipliers. The interplay between the injected signal and feedback from external reflections is studied and demonstrated to increase or decrease the locking bandwidth relative to the classic locking range depending on the phase of the feedback.

We report continuous wave (cw) operation of a terahertz quantum-cascade vertical-external-cavity surface-emitting laser with an external cavity length of approximately 30 mm, benefited by an intra-cryostat focusing cavity. Compared to previous plano–plano cavities, an off-axis paraboloid mirror is introduced into the external cavity as a focusing element to reduce the diffraction loss and to enable cw lasing using small-area metasurfaces and long cavity lengths. The device shows lasing operation in the cw mode up to 111 K, and cw output power up to 11.5 mW at 77 K (0.5% wall-plug efficiency). A circular, directive beam pattern is collected, and free-running linewidths on the order of tens of kHz are measured over tens of seconds.

An active amplifying metasurface based on a quantum-cascade gain material at 2.7 THz is studied. The metasurface is first evaluated as the active component of an external cavity laser with excellent beam quality and frequency tunability from 2.55–2.8 THz. Amplification and absorption of the metasurface alone are then separately measured at a single frequency using a probe signal from a CO2-pumped gas laser operating at 2.743 THz. The metasurface reflectance vs bias is measured and compared with expectations from non-equilibrium Green’s function simulations of the quantum-cascade gain material and FEM simulations of the metasurface reflectance. A peak amplification on the order of 0.3 dB is measured. Design strategies are discussed for increasing single-reflection amplification (upward of 10 dB) and reducing power dissipation. Further increased amplification could be achieved by cascading multiple metasurfaces.

Polygenic indexes (PGIs) are DNA-based predictors. Their value for research in many scientific disciplines is growing rapidly. As a resource for researchers, we used a consistent methodology to construct PGIs for 47 phenotypes in 11 datasets. To maximize the PGIs' prediction accuracies, we constructed them using genome-wide association studies-some not previously published-from multiple data sources, including 23andMe and UK Biobank. We present a theoretical framework to help interpret analyses involving PGIs. A key insight is that a PGI can be understood as an unbiased but noisy measure of a latent variable we call the 'additive SNP factor'. Regressions in which the true regressor is this factor but the PGI is used as its proxy therefore suffer from errors-in-variables bias. We derive an estimator that corrects for the bias, illustrate the correction, and make a Python tool for implementing it publicly available.

We compare the performance of 10 and 5 μm thick metal-metal waveguide terahertz quantum-cascade laser ridges operating around 2.7 THz and based on a 4-well phonon depopulation active region design. Thanks to reduced heat dissipation and lower thermal resistance, the 5 μm thick material shows an 18 K increase in continuous wave operating temperature compared to the 10 μm material, despite a lower maximum pulsed-mode operating temperature and a larger input power density. A maximum continuous wave operating temperature of 129 K is achieved using the 5 μm thick material and a 15 μm wide ridge waveguide, which lased up to 155 K in the pulsed mode. The use of thin active regions is likely to become increasingly important to address the increasing input power density of emerging 2- and 3-well active region designs that show the highest pulsed operating temperatures.

An amplifying quantum-cascade (QC) metasurface, the key component of the QC vertical-external-cavity surface-emitting-laser (VECSEL), is studied as a function of injected current density using reflection-mode terahertz time domain spectroscopy. Nearly perfect absorption is measured at zero bias, which is associated with the transition from the weak to strong coupling condition between the metasurface resonance and an intersubband transition within the QC material. An increase in reflectance is observed as the device is biased, both due to reduction in intersubband loss and the presence of intersubband gain. Significant phase modulation associated with the metasurface resonance is observed via electrical control, which may be useful for electrical tuning of QC-VECSEL. These results provide insight into the interaction between the intersubband QC-gain material and the metasurface and modify the design rules for QC-VECSELs for both biased and unbiased regions.

Ethanol is one of the most widely used drugs in the world. Ethanol induces profound physiological and behavioural responses in invertebrate model organisms, such as Caenorhabditis elegans and Drosophila melanogaster. Lumbriculus variegatus (Annelida, Oligochaete) is an aquatic worm which shows behavioural responses to common drugs and thus is potentially useful in pharmacological research. The effects of ethanol are unknown in this organism. In this study, we examine the effects of acute exposure to ethanol (0–500 mM) on the stereotypical movements and locomotor activity of L. variegatus and examine the concentration‐ (0–500 mM) and time‐dependent (0–210 min) effects of ethanol in L. variegatus. We show that ≥250 mM ethanol reversibly reduced the ability of tactile stimulation to elicit stereotypical movements, namely body reversal and helical swimming and locomotor activity (p < 0.05, N = 8). We also found that 2 min of exposure to ≥250 mM ethanol rapidly induces steady‐state hypokinesis (p < 0.05, N = 11) and confirm ethanol absorption into L. variegatus tissues. Additionally, we also observed acute ethanol tolerance after 150 min of exposure to 500 mM ethanol (p < 0.05, N = 24). This study is the first to report the behavioural effects of ethanol in L. variegatus. Our results show that this is a model organism for use in ethanol studies, providing further evidence for its utility in pharmacological research. [ABSTRACT FROM AUTHOR]

To understand how aging affects functional decline and increases disease risk, it is necessary to develop accurate and reliable measures of how fast a person is aging. Epigenetic clocks measure aging but require DNA methylation data, which many studies lack. Using data from the Dunedin Study, we introduce an accurate and reliable measure for the rate of longitudinal aging derived from cross-sectional brain MRI: the Dunedin Pace of Aging Calculated from NeuroImaging or DunedinPACNI. Exporting this measure to the Alzheimer's Disease Neuroimaging Initiative and UK Biobank neuroimaging datasets revealed that faster DunedinPACNI predicted participants' cognitive impairment, accelerated brain atrophy, and conversion to diagnosed dementia. Underscoring close links between longitudinal aging of the body and brain, faster DunedinPACNI also predicted physical frailty, poor health, future chronic diseases, and mortality in older adults. Furthermore, DunedinPACNI followed the expected socioeconomic health gradient. When compared to brain age gap, an existing MRI aging biomarker, DunedinPACNI was similarly or more strongly related to clinical outcomes. DunedinPACNI is a "next generation" MRI measure that will be made publicly available to the research community to help accelerate aging research and evaluate the effectiveness of dementia prevention and anti-aging strategies., Competing Interests: CONFLICT OF INTEREST K. Sugden, A. Caspi, and T. E. Moffitt are listed as inventors of DunedinPACE, a Duke University and University of Otago invention licensed to TruDiagnostic for commercial uses; however, the DunedinPACE algorithm is open access for research purposes. All other authors report no conflict of interest.