Search

Abstract Lignin is main composition of agricultural biomass which can be decomposed through enzymatic hydrolysis by fungi. However, there are still needs to identify more efficient and effective fungal stain for biomass valorization. In this study, lignin degrading fungi from birch forest were screened for sustainable degradation of waste agricultural straws. The most effective strain was identified as Cerrena unicolor GC.u01 using 18 S rDNA gene-sequencing technology. Three different crop straws (corn stalk, rice and wheat straws) were used for the biotreatment studies. The activities of lignin degrading enzymes, laccase (Lac), cellulase and xylanase, secreted by C. unicolor were also determined. Scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR) and thermal gravimetric analyzer (TGA) were further used to monitor the effects of the biotreatment process. The results showed that C. unicolor degraded 34.3% rice straw lignin, a percentage which was higher than other isolated strains after 15 d straw liquid fermentation. The highest Lac activity (8.396 U•mL− 1) was observed with corn stalk on the 7 d. Cellulase and xylanase activities, in the same biomass, were higher than those of wheat and rice straws after 15 d. Furthermore, SEM, FTIR and TGA analyses showed that C. unicolor pretreatment process had significant effects on corn stalk, rice and wheat straws’ structures. The newly isolated stain of C. unicolor demonstrated high lignin degradation potential that can provide effective, ecofriendly means of valorizing biomass to industrial useable raw-material.

Blending modification is used to improve the hemocompatibility of cellulose acetate (CA) dialysis membranes while endowing the CA membrane with endotoxin scavenging and antibacterial capabilities. First, polydopamine (PDA) and polyethylenimine (PEI) are used as negatively charged and positively charged moieties, respectively, together with cellulose nanocrystals (CNCs) to construct mixed charge CNCs (PEI‐PDA@CNCs). Then PEI‐PDA@CNCs is blended with the CA casting solution, and the modified CA dialysis membrane is prepared through a phase inversion process. Through biocompatibility, adsorption, antibacterial, and filtration experiments, various properties of PEI‐PDA@CNCs modified CA membrane (PDCA) are systematically tested. The results show that the PDCA membrane exhibited good blood compatibility and noncytotoxicity. At the same time, the PDCA membrane has antibacterial properties and excellent endotoxin adsorption capacity. Compared with the CA membrane, the clearance rates of PDCA membrane for Staphylococcus aureus and Escherichia coli reach 54.0% ± 1.5% and 52.9% ± 5.9% respectively. In the dynamic adsorption experiment, the adsorption capacity of PDCA membrane for endotoxin increases to 2322.1 ± 45.9 EU/g. The research results indicate that PEI‐PDA@CNC‐modified multifunctional CA membrane with endotoxin adsorption and antibacterial properties has potential application prospects in the fields of hemodialysis and blood purification. [ABSTRACT FROM AUTHOR]

A bio‐based nanocomposite optical film was obtained through a simple sol‐gel process and solution casting. The dispersion effect of cellulose nanocrystals (CNCs) gel and the optical properties, mechanical performance and thermal stability of CNC‐doped cellulose triacetate (TAC) films (TAC−X) were systematically evaluated. The results show that CNCs can be well dispersed in hydrophobic organic solvents and TAC matrices through the sol‐gel process. TAC−X film has excellent optical properties, its light transmittance is above 92 %, its haze value and birefringence are low, ranging from 0.21±0.01 % to 0.38±0.02 %, and (1.64±0.26)×10−6 to (2.49±0.50)×10−6 respectively. When doped with 2 wt % CNCs, the tensile strength and Young's modulus of the TAC‐2 film were 33.0 % and 30.1 % higher than those of the pure TAC film, separately. At the same time, the TAC−X film also maintains good thermal stability, with its glass transition temperature and maximum decomposition temperature falling between 215–216 °C and 366–368 °C respectively. The simple sol‐gel process provides a convenient and efficient way to use CNCs doping to enhance the physical and mechanical properties of TAC optical films. [ABSTRACT FROM AUTHOR]

Shape memory polyimides (SMPI) with adjustable shape recovery temperatures have been paid much attention in both fundamental research and practical applications. However, the intrinsically electrical insulation of SMPIs limits their applications. In this article, the electrically conductive shape memory polyimide‐polyaniline (SMPI‐PANI) composite with interpenetrating networks was synthesized by in situ polycondensation. Compared with pure SMPI, the electrical resistivity of SMPI‐PANI composites reduced by about 12 orders of magnitude when the PANI content was 15 wt%. The addition of PANI had less influence on the glass transition temperature and storage modulus in glassy state. But the storage modulus of SMPI‐PANI composites in rubbery state was over 40 times higher than that of pure SMPI, indicating that SMPI‐PANI composites have higher stiffness during shape recovery. The SMPI‐PANI composites demonstrate excellent shape memory performance with shape fixation ratio higher than 97% and shape recovery ratio higher than 93%. The SMPI‐PANI composites also have good thermal stability with the effective decomposition temperatures higher than 150°C. The SMPI‐PANI composite in our work is a potential material for deployable aerospace structure. [ABSTRACT FROM AUTHOR]