Search

This study investigated the enhancing effects of the temperature-resistant polymer Poly(ethylene-co-N-methylbutenoyl carboxylate-co-styrenesulfonate-co-pyrrolidone) (hereinafter referred to as Z364) on the performance of cocamidopropyl hydroxy sulfobetaine (CHSB) foam under high-temperature and high-salinity conditions. The potential of this enhanced foam system for mobility control during heavy oil thermal recovery processes was also evaluated. Through a series of experiments, including foam stability tests, surface tension measurements, rheological assessments, and parallel core flooding experiments, we systematically analyzed the interaction between the Z364 polymer and CHSB surfactant on foam performance. The results indicated that the addition of Z364 significantly improved the strength, thermal resistance, and salt tolerance of CHSB foam. Furthermore, the adsorption of CHSB on the polymer chains enhanced the salt resistance of the polymer itself, particularly demonstrating stronger blocking effects in high-permeability cores. The experimental findings showed that Z364 increased the viscosity of the liquid film, slowed down liquid drainage, and reduced gas diffusion, effectively extending the half-life of CHSB foam and improving its stability under high-temperature conditions. Additionally, in parallel core flooding experiments, the polymer-enhanced foam exhibited significant flow diversion effects in both high-permeability and low-permeability cores, effectively directing more fluid into low-permeability channels and improving fluid distribution in heterogeneous reservoirs. Overall, Z364 polymer-enhanced CHSB foam demonstrated superior mobility control during heavy oil thermal recovery, offering new technical insights for improving the development efficiency of high-temperature, high-salinity reservoirs. [ABSTRACT FROM AUTHOR]

Nanotechnology plays a pivotal role in the biomedical field, especially in the synthesis and regulation of drug particle size. Reducing drug particles to the micron or nanometer scale can enhance bioavailability. Supercritical fluid technology, as a green drug development strategy, is expected to resolve the challenges of thermal degradation, uneven particle size, and organic solvent residue faced by traditional methods such as milling and crystallization. This paper provides an insight into the application of super-stable homogeneous intermix formulating technology (SHIFT) and super-table pure-nanomedicine formulation technology (SPFT) developed based on supercritical fluids for drug dispersion and micronization. These technologies significantly enhance the solubility and permeability of hydrophobic drugs by controlling the particle size and morphology, and the modified drugs show excellent therapeutic efficacy in the treatment of hepatocellular carcinoma, pathological scarring, and corneal neovascularization, and their performance and efficacy are highlighted when administered through multiple routes of administration. Overall, supercritical fluids have opened a green and efficient pathway for clinical drug development, which is expected to reduce side effects and enhance therapeutic efficacy. [ABSTRACT FROM AUTHOR]

The presence of pharmaceuticals in effluents, which are wastewater discharges from various sources, has emerged as a significant environmental concern in recent years. Among the various methods available to address this challenge, adsorption stands out as one of the most effective, both technically and economically. In this study, we investigate the potential of cross-linked chitosan (C-CHIT) as an adsorbent for sodium cromoglicate (CG) and sodium diclofenac (DF). Both CG and DF were found to spontaneously adsorb onto C-CHIT, a sorbent with a positively charged surface when dispersed in water (as confirmed by zeta potential measurements). The adsorption of these anionic drugs resulted in a change in the polarity of the surface charge. Thermodynamic analysis was conducted using a standard approach, wherein parameters from Redlich–Peterson and Frumkin isotherms at the low-concentration limit were utilized to calculate the enthalpy and entropy of adsorption. This analysis suggested that CG was more effectively adsorbed onto C-CHIT. Additionally, a novel approach was proposed in this study for adsorption under surface saturation conditions, which deviate from ideal solution conditions. Interestingly, thermodynamic data indicated a reversal of behavior, with DF being more effectively adsorbed by C-CHIT. This finding was supported by geometric parameters calculated using MarvinSketch 23.12, along with a more repulsive Frumkin's lateral interaction parameter for CG. [ABSTRACT FROM AUTHOR]

Cardiovascular diseases remain a leading cause of mortality globally, with atherosclerosis representing a significant pathological means, often leading to myocardial infarction. Coronary artery bypass surgery, a common procedure used to treat coronary artery disease, presents challenges due to the limited autologous tissue availability or the shortcomings of synthetic grafts. Consequently, there is a growing interest in tissue engineering approaches to develop vascular substitutes. This review offers an updated picture of the state of the art in vascular tissue engineering, emphasising the design of scaffolds and dynamic culture conditions following a biomimetic approach. By emulating native vessel properties and, in particular, by mimicking the three-layer structure of the vascular wall, tissue-engineered grafts can improve long-term patency and clinical outcomes. Furthermore, ongoing research focuses on enhancing biomimicry through innovative scaffold materials, surface functionalisation strategies, and the use of bioreactors mimicking the physiological microenvironment. Through a multidisciplinary lens, this review provides insight into the latest advancements and future directions of vascular tissue engineering, with particular reference to employing biomimicry to create systems capable of reproducing the structure–function relationships present in the arterial wall. Despite the existence of a gap between benchtop innovation and clinical translation, it appears that the biomimetic technologies developed to date demonstrate promising results in preventing vascular occlusion due to blood clotting under laboratory conditions and in preclinical studies. Therefore, a multifaceted biomimetic approach could represent a winning strategy to ensure the translation of vascular tissue engineering into clinical practice. [ABSTRACT FROM AUTHOR]

Lung cancer has the lowest survival rate due to its late-stage diagnosis, poor prognosis, and intra-tumoral heterogeneity. These factors decrease the effectiveness of treatment. They release chemokines and cytokines from the tumor microenvironment (TME). To improve the effectiveness of treatment, researchers emphasize personalized adjuvant therapies along with conventional ones. Targeted chemotherapeutic drug delivery systems and specific pathway-blocking agents using nanocarriers are a few of them. This study explored the nanocarrier roles and strategies to improve the treatment profile's effectiveness by striving for TME. A biofunctionalized nanocarrier stimulates biosystem interaction, cellular uptake, immune system escape, and vascular changes for penetration into the TME. Inorganic metal compounds scavenge reactive oxygen species (ROS) through their photothermal effect. Stroma, hypoxia, pH, and immunity-modulating agents conjugated or modified nanocarriers co-administered with pathway-blocking or condition-modulating agents can regulate extracellular matrix (ECM), Cancer-associated fibroblasts (CAF),Tyro3, Axl, and Mertk receptors (TAM) regulation, regulatory T-cell (Treg) inhibition, and myeloid-derived suppressor cells (MDSC) inhibition. Again, biomimetic conjugation or the surface modification of nanocarriers using ligands can enhance active targeting efficacy by bypassing the TME. A carrier system with biofunctionalized inorganic metal compounds and organic compound complex-loaded drugs is convenient for NSCLC-targeted therapy. [ABSTRACT FROM AUTHOR]

Two open issues on the measurement of the dilational modulus (E) for an adsorbed protein film during the adsorption process have been unacknowledged: how E varies during the adsorption and the length of time needed to attain a stable E value. A new approach for detecting the E variation from a clean air–water interface to saturated film and estimating the time needed to reach a saturated state was proposed. A pendant bubble tensiometer was utilized for measuring the relaxations of surface tension (ST) and surface area (SA), and the E was evaluated from the relaxation data of minute distinct perturbances. The data showed a clear variation in E during the BSA adsorption: E sharply decreased to a minimum at the early stage of BSA adsorption; then, it rose from this minimum and oscillated for a while before reaching an E corresponding to a saturated BSA film after a significant duration. The adsorbed BSA film took ~35 h to reach its saturated state, which was much longer than the reported lifetime of the adsorbed film in the literature. A rapid surface perturbation (forced bubble expansion/compression) could change the E, causing a significant drop in E followed by a slow increase to the original stable value. [ABSTRACT FROM AUTHOR]

The development of biocompatible scaffolds is rapidly growing in several fields of human health, particularly for the treatment of bone defects. In this study, silver nanoparticle (AgNPs)-incorporated hydroxyapatite (HA), chitosan (Chi), and polyvinylpyrrolidone (PVP)-based scaffolds were fabricated using the freeze-drying method for bone tissue engineering. Physicochemical properties such as porosity, density, swelling ratio, and biodegradability, as well as blood biocompatibility, brine shrimp lethality, antibacterial activities, FTIR-ATR, tensile strength, cytotoxicity, and SEM, were conducted. A study on the in vitro release of ceftriaxone (Cef), a routinely prescribed medication for treating osteomyelitis, was done. The selected scaffolds had desirable porosity, density, swelling capability, and biodegradation rate, which would meet the basic prerequisites for osteogenesis. The scaffolds showed qualitative and quantitative antibacterial activities against Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, and Pseudomonas aeruginosa. Scaffolds were minimally cytotoxic to brine shrimp and RBC biocompatible. FTIR analysis confirmed intermolecular interaction among components of scaffolds. Scaffold had a tensile strength of 2.9 ± 0.22 N/mm2 and a non-cytotoxic effect on Vero cell lines. Surface morphology, pore shape, and sizes (98–382 μm) were observed through SEM. The percentage of drug (Cef) loading was found to be 63.16 ± 4.85%. An initial burst release of Cef was 40.21 ± 1.50% in the first 24 h. A sustained release of Cef was observed after 4 days, and about 60.36 ± 2.38% was released within 14 days. Therefore, selected AgNPs-incorporated HA-Chi-PVP scaffold could be a potential aid for bone tissue engineering. [ABSTRACT FROM AUTHOR]

The administration of poorly water-soluble drugs represents a relevant problem due to the low body fluids transport efficiency through hydrophilic hydrogels. Star-shaped co-polymers, i.e., amphiphilic polymers such as those with a hydrophobic core and a hydrophilic outer shell, can be used to improve weak interactions with drugs, with relevant benefits in terms of administration and controlled delivery. In this work, two different co-polymers, four-arm star-shaped PCL–PEG and six-arm star-shaped PCL–PEG, were synthesized via ring-opening polymerization to be loaded with ciprofloxacin. 1H-NMR and FTIR analyses confirmed that PCL arms were successfully grafted to the mPEG backbone, while DSC analysis indicated similar crystallinity and melting point, ranging from 56 to 60 °C, independent of the different co-polymer architecture. Therefore, both star-shaped PCL-PEGs were investigated as cargo device for ciprofloxacin. No significant differences were observed in terms of drug entrapment efficiency (>95%) and drug release, characterized by a pronounced burst followed by a slow sustained release, only slightly affected by the co-polymer architecture. This result was also confirmed with curve fitting via the Korsmeyer–Peppas model. Lastly, good antibacterial properties and biocompatibility exhibited in both star-shaped PCL–PEG co-polymers suggest a promising use for oral delivery applications. [ABSTRACT FROM AUTHOR]

One parameter frequently considered to be relevant for superspreading of trisiloxane surfactants is surface tension kinetics. In the scientific literature, some experimental results reported for trisiloxane surfactants are in contradiction with fundamental concepts of surfactant monomer diffusion. Therefore, maximum bubble pressure tensiometry has been used to determine dynamic surface tension (DST) of two types of trisiloxane surfactants: superspreader and non-superspreader. Results show that both surfactants behave similarly at concentrations below critical micelle concentration (CMC), as expected. The CMC curves, as determined by drop shape analysis, confirmed that the more hydrophilic non-superspreader has a higher CMC as compared to the more hydrophobic superspreader. Accordingly, the lower surfactant monomer concentration of the superspreader results in a higher DST than the non-superspreader at the same surface age. So, in contrary to claims in the literature, there is nothing mysterious or unexpected concerning the surface tension behavior of trisiloxane surfactants. [ABSTRACT FROM AUTHOR]

Approximately 1 billion people are affected by neglected diseases around the world. Among these diseases, schistosomiasis constitutes one of the most important public health problems, being caused by Schistosoma mansoni and treated through the oral administration of praziquantel (PZQ). Despite being a common disease in children, the medication is delivered in the form of large, bitter-tasting tablets, which makes it difficult for patients to comply with the treatment. In order to mask the taste of the drug, allow more appropriate doses for children, and enhance the absorption by the body, different polymer matrices based on poly(methyl methacrylate) (PMMA) were developed and used to encapsulate PZQ. Polymer matrices included PMMA nano- and microparticles, PMMA-co-DEAEMA (2-(diethylamino)ethyl methacrylate), and PMMA-co-DMAEMA (2-(dimethylamino)ethyl methacrylate) microparticles. The performances of the drug-loaded particles were characterized in vitro through dissolution tests and in vivo through pharmacokinetic analyses in rats for the first time. The in vitro dissolution studies were carried out in accordance with the Brazilian Pharmacopeia and revealed a good PZQ release profile in an acidic medium for the PMMA-DEAEMA copolymer, reaching values close to 100 % in less than 3 h. The in vivo pharmacokinetic analyses were conducted using free PZQ as the control group that was compared with the investigated matrices. The drug was administered orally at doses of 60 mg/kg, and the PMMA-co-DEAEMA copolymer microparticles were found to be the most efficient release system among the investigated ones, reaching a Cmax value of 1007 ± 83 ng/mL, even higher than that observed for free PZQ, which displayed a Cmax value of 432 ± 98 ng/mL. [ABSTRACT FROM AUTHOR]

This review provides a concise overview of up-to-date developments in the processing of neat poly(lactic acid) (PLA), improvement in its properties, and preparation of advanced materials using a green medium (CO2 under elevated pressure). Pressurized CO2 in the dense and supercritical state is a superior alternative medium to organic solvents, as it is easily available, fully recyclable, has easily tunable properties, and can be completely removed from the final material without post-processing steps. This review summarizes the state of the art on PLA drying, impregnation, foaming, and particle generation by the employment of dense and supercritical CO2 for the development of new materials. An analysis of the effect of processing methods on the final material properties was focused on neat PLA and PLA with an addition of natural bioactive components. It was demonstrated that CO2-assisted processes enable the control of PLA properties, reduce operating times, and require less energy compared to conventional ones. The described environmentally friendly processing techniques and the versatility of PLA were employed for the preparation of foams, aerogels, scaffolds, microparticles, and nanoparticles, as well as bioactive materials. These PLA-based materials can find application in tissue engineering, drug delivery, active food packaging, compostable packaging, wastewater treatment, or thermal insulation, among others. [ABSTRACT FROM AUTHOR]

Ultra-high-molecular-weight polyethylene (UHMWPE) matrices containing low-density polyethylene (LDPE), hydroxyapatite (HAp) as filler, and rosemary extract (RM) as stabilizer were investigated for their qualification for long-term applications. The significant contributions of the blend components were analyzed, and variations in mechanical properties, oxidation strength, thermal behavior, crystallinity, and wettability were discussed. SEM images of microstructural peculiarities completed the introspective survey. The stability improvement due to the presence of both additives was an increase in the total degradation period of 67% in comparison with an unmodified HDPE/UHMWPE blend when the materials were subjected to a 50 kGy γ-dose. There was growth in activation energies from 121 kJ mol−1 to 139 kJ mol−1 when HAp and rosemary extract delayed oxidation. The exposure of samples to the action of γ-rays was found to be a proper procedure for accomplishing accelerated oxidative degradation. The presence of rosemary extract and HAp powder significantly increased the thermal and oxidation resistances. The calculation of material lifetimes at various temperatures provided meaningful information on the wearability and integrity of the inspected composites. [ABSTRACT FROM AUTHOR]

Multi-photon microscopy (MPM) and coherent anti-Stokes Raman scattering (CARS) are two advanced nonlinear optical imaging techniques, which provide complementary information and have great potential in combination for noninvasive in vivo biomedical applications. This paper provides a detailed discussion of the basics, development and applications of these technologies for in vivo skin research, covering the following topics: The principle and advantage of MPM and CARS, instrumentation development for in vivo applications, MPM and CARS of normal skin, application of MPM and CARS in skin cancer and disease diagnosis; application of MPM in skin disease intervention, i.e., imaging guided two-photon photothermolysis. [ABSTRACT FROM AUTHOR]

Cardiovascular diseases are the leading cause of global mortality. Over the past two decades, researchers have tried to provide novel solutions for end-stage heart failure to address cardiac transplantation hurdles such as donor organ shortage, chronic rejection, and life-long immunosuppression. Cardiac decellularized extracellular matrix (dECM) has been widely explored as a promising approach in tissue-regenerative medicine because of its remarkable similarity to the original tissue. Optimized decellularization protocols combining physical, chemical, and enzymatic agents have been developed to obtain the perfect balance between cell removal, ECM composition, and function maintenance. However, proper assessment of decellularized tissue composition is still needed before clinical translation. Recellularizing the acellular scaffold with organ-specific cells and evaluating the extent of cardiomyocyte repopulation is also challenging. This review aims to discuss the existing literature on decellularized cardiac scaffolds, especially on the advantages and methods of preparation, pointing out areas for improvement. Finally, an overview of the state of research regarding the application of cardiac dECM and future challenges in bioengineering a human heart suitable for transplantation is provided. [ABSTRACT FROM AUTHOR]

In this study, we aimed to explore the morphologies of porous poly(lactic acid) (PLA) fibers through liquid–liquid phase separation, and investigate the relationship among pore formation, physical properties, and antibacterial activities of the fibers for identifying their potential as drug delivery carriers. Antibacterial activities of gentamicin-, kanamycin-, and amikacin-loaded PLA fibers against E. coli and S. epidermidis were evaluated. The antibacterial activity of drugs against E. coli showed the following profile: gentamicin > amikacin > kanamycin; however, S. epidermidis growth was almost completely inhibited immediately after the administration of all three drugs. The efficiency of gentamicin can be attributed to the electrostatic interactions between the positively and negatively charged antibiotic and bacterial cell membrane, respectively. Furthermore, gentamicin-loaded porous PLA fibers were evaluated as drug delivery systems. The cumulative amount of gentamicin in porous PLA nanofibers was considerably higher than that in other PLA fibers for 168 h, followed by 7:3 PLA > 6:4 PLA > 5:5 PLA > non-porous PLA. The 7:3 PLA fibers were projected to be ideal drug carrier candidates for controlled antibiotic release in delivery systems owing to their interconnected internal structure and the largest surface area (55.61 m2 g−1), pore size (42.19 nm), and pore volume (12.78 cm3 g−1). [ABSTRACT FROM AUTHOR]

Fluorescence imaging through ultrathin fibers is a promising approach to obtain high-resolution imaging with molecular specificity at depths much larger than the scattering mean-free paths of biological tissues. Such imaging techniques, generally termed lensless endoscopy, rely upon the wavefront control at the distal end of a fiber to coherently combine multiple spatial modes of a multicore (MCF) or multimode fiber (MMF). Typically, a spatial light modulator (SLM) is employed to combine hundreds of modes by phase-matching to generate a high-intensity focal spot. This spot is subsequently scanned across the sample to obtain an image. We propose here a novel scanning scheme, partial speckle scanning (PSS), inspired by compressive sensing theory, that avoids the use of an SLM to perform fluorescent imaging with optical fibers with reduced acquisition time. Such a strategy avoids photo-bleaching while keeping high reconstruction quality. We develop our approach on two key properties of the MCF: (i) the ability to easily generate speckles, and (ii) the memory effect that allows one to use fast scan mirrors to shift light patterns. First, we show that speckles are subexponential random fields. Despite their granular structure, an appropriate choice of the reconstruction parameters makes them good candidates to build efficient sensing matrices. Then, we numerically validate our approach and apply it on experimental data. The proposed sensing technique outperforms conventional raster scanning: higher reconstruction quality is achieved with far fewer observations. For a fixed reconstruction quality, our speckle scanning approach is faster than compressive sensing schemes which require changing the speckle pattern for each observation. [ABSTRACT FROM AUTHOR]

Structural properties of the anionic surfactant dioctyl sodium sulfosuccinate (AOT or Aerosol-OT) adsorbed on the mica surface were investigated by molecular dynamics simulation, including the effect of surface loading in the presence of monovalent and divalent cations. The simulations confirmed recent neutron reflectivity experiments that revealed the binding of anionic surfactant to the negatively charged surface via adsorbed cations. At low loading, cylindrical micelles formed on the surface, with sulfate head groups bound to the surface by water molecules or adsorbed cations. Cation bridging was observed in the presence of weakly hydrating monovalent cations, while sulfate groups interacted with strongly hydrating divalent cations through water bridges. The adsorbed micelle structure was confirmed experimentally with cryogenic electronic microscopy, which revealed micelles approximately 2 nm in diameter at the basal surface. At higher AOT loading, the simulations reveal adsorbed bilayers with similar surface binding mechanisms. Adsorbed micelles were slightly thicker (2.2–3.0 nm) than the corresponding bilayers (2.0–2.4 nm). Upon heating the low loading systems from 300 K to 350 K, the adsorbed micelles transformed to a more planar configuration resembling bilayers. The driving force for this transition is an increase in the number of sulfate head groups interacting directly with adsorbed cations. [ABSTRACT FROM AUTHOR]

The Poiseuille flow (centreline velocity Uc) of a fluid (kinematic viscosity ν) past a circular cylinder (radius R) in a Hele-Shaw cell (height 2h) is traditionally characterised by a Stokes flow (Λ = (UcR/ν)(h/R)² ≪ 1) through a thin gap (≮ = h/R ≪ 1). In this work we use asymptotic methods and direct numerical simulations to explore the parameter space Λ-≮ when these conditions are not met. Starting with the Navier-Stokes equations and increasing Λ (which corresponds to increasing inertial effects), four successive regimes are identified, namely the linear regime, nonlinear regimes I and II in the boundary layer (the 'inner' region) and a nonlinear regime III in both the inner and outer region. Flow phenomena are studied with extensive comparisons made between reduced calculations, direct numerical simulations and previous analytical work. For ≮ = 0.01, the limiting condition for a steady flow as Λ is increased is the instability of the Poiseuille flow. However, for larger ≮, this limit is at a much higher Λ, resulting in a laminar separation bubble, of size O(h), forming for a certain range of ≮ at the back of the cylinder, where the azimuthal location was dependent on ≮. As ≮ is increased to approximately 0.5, the secondary flow becomes increasingly confined adjacent to the sidewalls. The results of the analysis and numerical simulations are summarised in a plot of the parameter space Λ-≮. [ABSTRACT FROM AUTHOR]

The application range of aerogels, especially in the life-science sector, can be extended by utilizing biocompatible polymers such as polylactic acid (PLA). However, the low glass transition temperature (Tg) of PLA and the challenging gelation techniques limit the application of supercritical CO2 (scCO2) drying and thus the PLA-aerogel production. The aim of this work is to overcome this challenge and to provide a better understanding of the thermodynamics of the process. Therefore, the gelation of amorphous PLA (PDLLA) and semicrystalline PLA (PLLA) via thermal-induced phase separation (TIPS) was studied. To identify polymer/solvent/antisolvent ratios suitable for gelation, thermodynamic modeling (PC-SAFT) was used to describe the corresponding ternary phase diagrams. scCO2 drying was used to preserve the mesoporous gel structure formed during the gelation. Due to the decrease in the Tg of PLA in the presence of CO2, this could not be applied to all gels. It was found that the critical parameter to enable the scCO2 drying of low Tg polymers is the crystallinity degree (Xc) of the polymer. Based on these results, some guidelines for producing aerogels from polymers with low Tg are formulated. [ABSTRACT FROM AUTHOR]