Search

Despite constituting a smaller fraction of the qubit's electromagnetic mode, surfaces and interfaces can exert significant influence as sources of high-loss tangents, which brings forward the need to reveal properties of these extended defects and identify routes to their control. Here, we examine the structure and composition of the metal-substrate interfacial layer that exists in Ta/sapphire-based superconducting films. Synchrotron-based X-ray reflectivity measurements of Ta films, commonly used in these qubits, reveal an unexplored interface layer at the metal-substrate interface. Scanning transmission electron microscopy and core-level electron energy loss spectroscopy identified an intermixing layer (≈0.65 ± 0.05 nm) at the metal-substrate interface containing Al, O, and Ta atoms. Density functional theory modeling reveals that the structure and properties of the Ta/sapphire heterojunctions are determined by the oxygen content on the sapphire surface prior to Ta deposition for two atomic terminations of sapphire. Using a multimodal approach, we gained deeper insights into the interface layer between the metal and substrate, which suggests that the orientation of deposited Ta films depend on the surface termination of sapphire. The observed elemental intermixing at the metal-substrate interface influences the thermodynamic stability and electronic behavior of the film, which may also affect qubit performance., (© 2025 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Charge transfer or redistribution at oxide heterointerfaces is a critical phenomenon, often leading to remarkable properties such as two-dimensional electron gas and interfacial ferromagnetism. Despite studies on LaNiO 3 /LaFeO 3 superlattices and heterostructures, the direction and magnitude of the charge transfer remain debated, with some suggesting no charge transfer due to the high stability of Fe 3+ (3d 5 ). Here, we synthesized a series of epitaxial LaNiO 3 /LaFeO 3 superlattices and demonstrated partial (up to ~0.5 e - /interface unit cell) charge transfer from Fe to Ni near the interface, supported by density functional theory simulations and spectroscopic evidence of changes in Ni and Fe oxidation states. The electron transfer from LaFeO 3 to LaNiO 3 and the subsequent rearrangement of the Fe 3d band create an unexpected metallic ground state within the LaFeO 3 layer, strongly influencing the in-plane transport properties across the superlattice. Moreover, we establish a direct correlation between interfacial charge transfer and in-plane electrical transport properties, providing insights for designing functional oxide heterostructures with emerging properties.

Understanding how doping influences physicochemical properties of ABO 3 perovskite oxides is critical for tailoring their functionalities. In this study, SrFe 0.67 Cr 0.33 O 3-δ epitaxial thin films were used to examine the effects of Fe and Cr competition on structure and B-site cation oxidation states. The films exhibit a perovskite-like structure near the film/substrate interface, while a brownmillerite-like structure with horizontal oxygen vacancy channels predominates near the surface. Electron energy loss spectroscopy shows Fe remains Fe 3+ , while Cr varies from ∼Cr 3+ (tetrahedral layers) to ∼Cr 4+ (octahedral layers) within brownmillerite phases and becomes ∼Cr 4.5+ in perovskite-like phases. Theoretical simulations indicate that Cr-O bond arrangements and the way oxygen vacancies interact with Cr and Fe drive Cr charge disproportionation. High-valent Cr cations introduce additional densities of states near the Fermi level, reducing the optical bandgap from ∼2.0 eV (SrFeO 2.5 ) to ∼1.7 eV (SrFe 0.67 Cr 0.33 O 3-δ ). These findings offer insights into B-site cation doping in the perovskite oxide framework.

Scaling up superconducting quantum circuits based on transmon qubits necessitates substantial enhancements in qubit coherence time. Over recent years, tantalum (Ta) has emerged as a promising candidate for transmon qubits, surpassing conventional counterparts in terms of coherence time. However, amorphous surface Ta oxide layer may introduce dielectric loss, ultimately placing a limit on the coherence time. In this study, a novel approach for suppressing the formation of tantalum oxide using an ultrathin magnesium (Mg) capping layer is presented. Synchrotron-based X-ray photoelectron spectroscopy studies demonstrate that oxide is confined to an extremely thin region directly beneath the Mg/Ta interface. Additionally, it is demonstrated that the superconducting properties of thin Ta films are improved following the Mg capping, exhibiting sharper and higher-temperature transitions to superconductive and magnetically ordered states. Moreover, an atomic-scale mechanistic understanding of the role of the capping layer in protecting Ta from oxidation is established based on computational modeling. This work provides valuable insights into the formation mechanism and functionality of surface tantalum oxide, as well as a new materials design principle with the potential to reduce dielectric loss in superconducting quantum materials. Ultimately, the findings pave the way for the realization of large-scale, high-performance quantum computing systems., (© 2024 Wiley‐VCH GmbH.)

The compact size, scalability, and strongly confined fields in integrated photonic devices enable new functionalities in photonic networking and information processing, both classical and quantum. Gallium phosphide (GaP) is a promising material for active integrated photonics due to its high refractive index, wide bandgap, strong nonlinear properties, and large acousto-optic figure of merit. This study demonstrates that silicon-lattice-matched boron-doped GaP (BGaP), grown at the 12-inch wafer scale, provides similar functionalities as GaP. BGaP optical resonators exhibit intrinsic quality factors exceeding 25,000 and 200,000 at visible and telecom wavelengths, respectively. It further demonstrates the electromechanical generation of low-loss acoustic waves and an integrated acousto-optic (AO) modulator. High-resolution spatial and compositional mapping, combined with ab initio calculations, indicate two candidates for the excess optical loss in the visible band: the silicon-GaP interface and boron dimers. These results demonstrate the promise of the BGaP material platform for the development of scalable AO technologies at telecom and provide potential pathways toward higher performance at shorter wavelengths., (© 2023 Wiley-VCH GmbH.)

Recent advances in superconducting qubit technology have led to significant progress in quantum computing, but the challenge of achieving a long coherence time remains. Despite the excellent lifetime performance that tantalum (Ta) based qubits have demonstrated to date, the majority of superconducting qubit systems, including Ta-based qubits, are generally believed to have uncontrolled surface oxidation as the primary source of the two-level system loss in two-dimensional transmon qubits. Therefore, atomic-scale insight into the surface oxidation process is needed to make progress toward a practical quantum processor. In this study, the surface oxidation mechanism of native Ta films and its potential impact on the lifetime of superconducting qubits were investigated using advanced scanning transmission electron microscopy (STEM) techniques combined with density functional theory calculations. The results suggest an atomistic model of the oxidized Ta(110) surface, showing that oxygen atoms tend to penetrate the Ta surface and accumulate between the two outermost Ta atomic planes; oxygen accumulation at the level exceeding a 1:1 O/Ta ratio drives disordering and, eventually, the formation of an amorphous Ta 2 O 5 phase. In addition, we discuss how the formation of a noninsulating ordered TaO 1-δ (δ < 0.1) suboxide layer could further contribute to the losses of superconducting qubits. Subsurface oxidation leads to charge redistribution and electric polarization, potentially causing quasiparticle loss and decreased current-carrying capacity, thus affecting superconducting qubit coherence. The findings enhance the comprehension of the realistic factors that might influence the performance of superconducting qubits, thus providing valuable guidance for the development of future quantum computing hardware.

Anisotropic and efficient transport of ions under external stimuli governs the operation and failure mechanisms of energy-conversion systems and microelectronics devices. However, fundamental understanding of ion hopping processes is impeded by the lack of atomically precise materials and probes that allow for the monitoring and control at the appropriate time- and length- scales. In this work, using in-situ transmission electron microscopy, we directly show that oxygen ion migration in vacancy ordered, semiconducting SrFeO 2.5 epitaxial thin films can be guided to proceed through two distinctly different diffusion pathways, each resulting in different polymorphs of SrFeO 2.75 with different ground electronic properties before reaching a fully oxidized, metallic SrFeO 3 phase. The diffusion steps and reaction intermediates are revealed by means of ab-initio calculations. The principles of controlling oxygen diffusion pathways and reaction intermediates demonstrated here may advance the rational design of structurally ordered oxides for tailored applications and provide insights for developing devices with multiple states of regulation., (© 2023. Springer Nature Limited.)

Longevity of Li ion batteries strongly depends on the interaction of transporting Li ions in electrode crystals with defects. However, detailed interactions between the Li ion flux and structural defects in the host crystal remain obscure due to the transient nature of such interactions. Here, by in situ transmission electron microscopy and density function theory calculations, we reveal how the diffusion pathways and transport kinetics of a Li ion can be affected by planar defects in a tungsten trioxide lattice. We uncover that changes in charge distribution and lattice spacing along the planar defects disrupt the continuity of ion conduction channels and dramatically increase the energy barrier of Li diffusion, thus, arresting Li ions at the defect sites and twisting the lithiation front. The atomic-scale understanding holds critical implications for rational interface design in solid-state batteries and solid oxide fuel cells.

A fundamental understanding of the transition metal dichalcogenide (TMDC)-metal interface is critical for their utilization in a broad range of applications. We investigate how the deposition of palladium (Pd), as a model metal, on WTe 2 (001), leads to the assembly of Pd into clusters and nanoparticles. Using X-ray photoemission spectroscopy, scanning tunneling microscopy imaging, and ab initio simulations, we find that Pd nucleation is driven by the interaction with and the availability of mobile excess tellurium (Te) leading to the formation of Pd-Te clusters at room temperature. Surprisingly, the nucleation of Pd-Te clusters is not affected by intrinsic surface defects, even at elevated temperatures. Upon annealing, the Pd-Te nanoclusters adopt an identical nanostructure and are stable up to ∼523 K. Density functional theory calculations provide a foundation for our understanding of the mobility of Pd and Te atoms, preferential nucleation of Pd-Te clusters, and the origin of their annealing-induced monodispersity. These results highlight the role the excess chalcogenide atoms may play in the metal deposition process. More broadly, the discoveries of synthetic pathways yielding thermally robust monodispersed nanostructures on TMDCs are critical to the manufacturing of novel quantum and microelectronics devices and catalytically active nano-alloy centers., (© The Author(s) 2023. Published by Oxford University Press on behalf of National Academy of Sciences.)

Neural network potentials (NNPs) can greatly accelerate atomistic simulations relative to ab initio methods, allowing one to sample a broader range of structural outcomes and transformation pathways. In this work, we demonstrate an active sampling algorithm that trains an NNP that is able to produce microstructural evolutions with accuracy comparable to those obtained by density functional theory, exemplified during structure optimizations for a model Cu-Ni multilayer system. We then use the NNP, in conjunction with a perturbation scheme, to stochastically sample structural and energetic changes caused by shear-induced deformation, demonstrating the range of possible intermixing and vacancy migration pathways that can be obtained as a result of the speedups provided by the NNP. The code to implement our active learning strategy and NNP-driven stochastic shear simulations is openly available at https://github.com/pnnl/Active-Sampling-for-Atomistic-Potentials.

Deformation processing of immiscible systems is observed to disrupt thermodynamic equilibrium, often resulting in nonequilibrium microstructures. The microstructural changes including nanostructuring, hierarchical distribution of phases, localized solute supersaturation, and oxygen ingress result from high-strain extended deformation, causing a significant change in mechanical properties. Because of the dynamic evolution of the material under large strain shear load, a detailed understanding of the transformation pathway has not been established. Additionally, the influence of these microstructural changes on mechanical properties is also not well characterized. Here, an immiscible Cu-4 at. % Nb alloy is subjected to a high-strain shear deformation (∼200); the deformation-induced changes in the morphology, crystal structure, and composition of Cu and Nb phases as a function of total strain are characterized using transmission electron microscopy and atom probe tomography. Furthermore, a multimodal experiment-guided computational approach is used to depict the initiation of deformation by an increase in misorientation boundaries by crystal plasticity-based grain misorientation modeling (strain ∼0.6). Then, co-deformation and nanolamination of Cu and Nb are envisaged by a finite element method-based computational fluid dynamic model with strain ranging from 10 to 200. Finally, the experimentally observed amorphization of the severely sheared supersaturated Cu-Nb-O phase was validated using the first principle-based simulation using density functional theory while highlighting the influence of oxygen ingress during deformation. Furthermore, the nanocrystalline microstructure shows a >2-fold increase in hardness and compressive yield strength of the alloy, elucidating the potential of deformation processing to obtain high-strength low-alloyed metals. Our approach presents a step-by-step evolution of a microstructure in an immiscible alloy undergoing severe shear deformation, which is broadly applicable to materials processing based on friction stir, extrusion, rolling, and surface shear deformation under wear and can be directly applied to understanding material behavior during these processes., Competing Interests: The authors declare no competing financial interest., (Not subject to U.S. Copyright. Published 2022 by American Chemical Society.)