Search

Given global water scarcity and the quest for sustainable energy, there's a pressing need for integrated approaches addressing water‐energy interdependence worldwide. A practical approach for this challenge involves the implementation of fog water collectors. Herein, a polyvinylidene fluoride (PVDF) multifunctional device capable of harvesting water and electricity from wind is developed and tested, collecting up to 365 mg cm−2 h−1 of fog water. Due to the piezoelectric nature of electrospun PVDF, these yarns and meshes not only serve as piezoelectric sensors, enabling the detection of incoming fog flow and determination of its speed and, bust also harvest electricity by charging a capacitor, making it a green and renewable power source. In this study, promising insights are offered into developing efficient fog water collection methods and utilizing piezoelectric fiber‐based yarns and meshes for multifunctional applications in sustainable water management, energy harvesting, and sensing in a single device. [ABSTRACT FROM AUTHOR]

In construction, textiles can be used either for reinforcing the structure or for finishing design. When we talk about function, the interior is no less important than the exterior and architecture of the building. Thus using textiles to reinforce the structure of buildings, textiles often perform a desired function of reinforcing the “finish.” Building textile materials include fibers that are mixed with concrete, fiberglass reinforcement meshes, insulators, etc. Textile architecture covers permanent tensile structures based on polyester or glass fiber fabrics, with polyvinyl chloride (PVC) or polytetrafluoroethylene (PTFE) coating and awnings generally supported by polyester or polyolefin fabrics, with or without coating, especially for gardening. All above topics are covered within this perspective with the experts from the group of smart textiles for building and living within COST Action CA17107 European Network to Connect Research and Innovation Efforts on Advanced Smart Textiles (CONTEXT) [1].

Nanofibrous materials generated through electrospinning have gained significant attention in tissue regeneration, particularly in the domain of bone reconstruction. There is high interest in designing a material resembling bone tissue, and many scientists are trying to create materials applicable to bone tissue engineering with piezoelectricity similar to bone. One of the prospective candidates is highly piezoelectric poly(vinylidene fluoride) (PVDF), which was used for fibrous scaffold formation by electrospinning. In this study, we focused on the effect of PVDF molecular weight (180,000 g/mol and 530,000 g/mol) and process parameters, such as the rotational speed of the collector, applied voltage, and solution flow rate on the properties of the final scaffold. Fourier Transform Infrared Spectroscopy allows for determining the effect of molecular weight and processing parameters on the content of the electroactive phases. It can be concluded that the higher molecular weight of the PVDF and higher collector rotational speed increase nanofibers' diameter, electroactive phase content, and piezoelectric coefficient. Various electrospinning parameters showed changes in electroactive phase content with the maximum at the applied voltage of 22 kV and flow rate of 0.8 mL/h. Moreover, the cytocompatibility of the scaffolds was confirmed in the culture of human adipose-derived stromal cells with known potential for osteogenic differentiation. Based on the results obtained, it can be concluded that PVDF scaffolds may be taken into account as a tool in bone tissue engineering and are worth further investigation. [ABSTRACT FROM AUTHOR]

Skin allergies and diseases, including atopic dermatitis (AD), affect millions worldwide. Current treatments for AD are often expensive, leading to a need for cost‐effective solutions. Here, using fiber‐based patches to maintain and increase skin hydration is explored, which helps treat eczema and AD. Nanofiber membranes are manufactured via electrospinning of eight different polymers: nylon 6 (PA6), polyimide (PI), poly(3‐hydroxybuty‐rate‐co‐3‐hydroxyvalerate (PHBV), poly(l‐lactide) (PLLA), polycaprolactone (PCL), and polystyrene (PS), and two molecular weights poly(vinyl butyral‐co‐vinyl alcohol‐co‐vinyl acetate) (PVB). Further, their morphology is examined through scanning electron microscopy (SEM), fibers, and pores diameter, wettability, and membrane thickness. Additionally, water vapor transmission rates (WVTR) are measured, and notably, skin hydration tests are conducted before and after using evening primrose oil‐infused patches. The comparison and findings highlight the flexibility of electrospun patches, demonstrating their potential in maintaining skin hydration for 6 h and enhancing skin moisture, which are necessary in AD treatment. These insights, which focus on selecting the most effective performance patches, help improve skin moisture, leading to tailored treatments for AD, which can significantly impact the efforts to reduce healthcare costs and simplify skincare steps. [ABSTRACT FROM AUTHOR]

The skin is a complex layer system and the most important barrier between the environment and the organism. In this review, we describe some widespread skin problems, with a focus on eczema, which are affecting more and more people all over the world. Most of treatment methods for atopic dermatitis (AD) are focused on increasing skin moisture and protecting from bacterial infection and external irritation. Topical and transdermal treatments have specific requirements for drug delivery. Breathability, flexibility, good mechanical properties, biocompatibility, and efficacy are important for the patches used for skin. Up to today, electrospun fibers are mostly used for wound dressing. Their properties, however, meet the requirements for skin patches for the treatment of AD. Active agents can be incorporated into fibers by blending, coaxial or side‐by‐side electrospinning, and also by physical absorption post‐processing. Drug release from the electrospun membranes is affected by drug and polymer properties and the technique used to combine them into the patch. We describe in detail the in vitro release mechanisms, parameters affecting the drug transport, and their kinetics, including theoretical approaches. In addition, we present the current research on skin patch design. This review summarizes the current extensive know‐how on electrospun fibers as skin drug delivery systems, while underlining the advantages in their prospective use as patches for atopic dermatitis. This article is categorized under:Implantable Materials and Surgical Technologies > Nanomaterials and ImplantsImplantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and ReplacementTherapeutic Approaches and Drug Discovery > Emerging Technologies [ABSTRACT FROM AUTHOR]

In construction, textiles can be used either for reinforcing the structure or for finishing design. When we talk about function, the interior is no less important than the exterior and architecture of the building. Thus using textiles to reinforce the structure of buildings, textiles often perform a desired function of reinforcing the "finish." Building textile materials include fibers that are mixed with concrete, fiberglass reinforcement meshes, insulators, etc. Textile architecture covers permanent tensile structures based on polyester or glass fiber fabrics, with polyvinyl chloride (PVC) or polytetrafluoroethylene (PTFE) coating and awnings generally supported by polyester or polyolefin fabrics, with or without coating, especially for gardening. All above topics are covered within this perspective with the experts from the group of smart textiles for building and living within COST Action CA17107 European Network to Connect Research and Innovation Efforts on Advanced Smart Textiles (CONTEXT) [1]. [ABSTRACT FROM AUTHOR]

The global climate change is mainly caused by carbon dioxide (CO 2 ) emissions. To help reduce CO 2 emissions and conserve thermal energy, sustainable materials based on flexible thermal insulation are developed to minimize heat flux, drawing inspiration from natural systems such as polar bear hairs. The unique structure of hollow double-shell fibers makes it possible to achieve low thermal conductivity in the material while retaining exceptional elasticity, allowing it to adapt to insulation systems of any shape. The layered system of porous mats reaches a thermal conductivity coefficient of 0.031 W∙m⁻¹∙K⁻¹ and enables to reduce the heat transfer. The results achieved using scanning thermal microscopy (SThM) correlate with the simulated heat flow in the case of individual fibers. This research study brings new insights into the energy efficiency of domestic environments, thereby addressing the growing demand for sustainable and high-performance insulation materials for saving energy loss and reducing pollution footprint., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

The skin is a complex layer system and the most important barrier between the environment and the organism. In this review, we describe some widespread skin problems, with a focus on eczema, which are affecting more and more people all over the world. Most of treatment methods for atopic dermatitis (AD) are focused on increasing skin moisture and protecting from bacterial infection and external irritation. Topical and transdermal treatments have specific requirements for drug delivery. Breathability, flexibility, good mechanical properties, biocompatibility, and efficacy are important for the patches used for skin. Up to today, electrospun fibers are mostly used for wound dressing. Their properties, however, meet the requirements for skin patches for the treatment of AD. Active agents can be incorporated into fibers by blending, coaxial or side-by-side electrospinning, and also by physical absorption post-processing. Drug release from the electrospun membranes is affected by drug and polymer properties and the technique used to combine them into the patch. We describe in detail the in vitro release mechanisms, parameters affecting the drug transport, and their kinetics, including theoretical approaches. In addition, we present the current research on skin patch design. This review summarizes the current extensive know-how on electrospun fibers as skin drug delivery systems, while underlining the advantages in their prospective use as patches for atopic dermatitis. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Therapeutic Approaches and Drug Discovery > Emerging Technologies., (© 2022 Wiley Periodicals LLC.)