Search

This document provides an overview of a collection of scientific articles on advanced processes in metallurgical technologies. The collection aims to contribute to the development of metallurgy and materials engineering by considering environmental protection, waste disposal, and energy savings. The articles cover a wide range of topics, including ore processing, metal refining, welding, and recycling, and study various materials such as iron ores, steel, tungsten, and copper. The authors conducted studies on waste management in the mining industry and the temperature evolution of metal particles produced through centrifugal atomization. The articles provide valuable insights into these processes and aim to inspire further research in the field of metallurgy. [Extracted from the article]

Using 3D scanning, coordinate measuring machine, and roughness measurements we evaluated and compared zinc alloy castings produced in conventionally and additively manufactured shaped mould parts. Tests were conducted on castings from new shaped parts and subsequently after approximately every 100,000 shots. Castings from conventional parts had higher dimensional stability, but both types showed decreasing dimensional deviations over time. Castings from new additively manufactured parts had higher roughness initially, but this improved with use. Overall, there were no significant issues, and the benefits of additive-shaped parts prevailed. However, more testing is needed for a final recommendation for use in real operating conditions, requiring hundreds of thousands more shots. [ABSTRACT FROM AUTHOR]

Foundry Degassing Units (FDU) are used for refining aluminum alloys. For an ideal refining process using an FDU unit, it is necessary to select several parameters, which are linked to each other. For a rotary impeller, we searched for several parameters, such as its optimal shape, speed in the liquid alloy, and distance from the bottom of the refining ladle, where the aforementioned parameters contribute to the overall wear and life of the rotor and, consequently, of the rotor shaft. The Computational Fluid Dynamics (CFD) method can be used to determine the above-mentioned parameters. This paper describes the particular steps of preparation of rotor geometry for the subsequent setting up of the basic numerical model. [ABSTRACT FROM AUTHOR]

The article deals with the use of computed tomography, an advanced method for evaluating the quality of aluminium castings. Casting quality is a key factor in ensuring safety and reliability in industrial applications. Computed tomography is a comprehensive method allowing a three-dimensional, high-resolution view of the internal structure of materials. The main focus of this paper is the study of BRACKET REAR aluminium castings, manufactured in two-piece moulds using a high-pressure die-casting technology. In this paper, four castings have been analysed which are produced in one cycle. The focus is on the problem of porosity and open stagnation in the castings. A numerical simulation has also been used to illustrate the occurrence of porosity, which can be used to determine both the occurrence of porosity and the occurrence of unfilled volume. The experimental part of the paper describes the methods used to evaluate the BRACKET REAR castings. The numerical simulation was performed in ProCAST 18.0 to determine the occurrence of porosity in the castings under study. The evaluation of computed tomography was performed in myVGL 3.0 2023 software to analyse the internal defects in the castings. The evaluation focused on assessing internal defects and their subsequent effect on the functionality of the final casting. [ABSTRACT FROM AUTHOR]

The present paper describes a comparison of the efficiency of different types of rotors used in the refining of aluminium melt at a foundry degassing unit (FDU). Physical modelling was used to obtain data for six different rotor types under defined experimental conditions. In order to evaluate the data from the physical model, an evaluation method based on the interpolation of degassing curves was developed in such a way that the resulting characteristic can be expressed by a single parameter. Using the new methodology, the datasets were replaced by a single dimensionless parameter, a, which characterizes the rotor performance at a given gas flow rate. Based on the comparison of these performance parameters, it was possible to mutually compare the rotor efficiency depending on the selected conditions. The comparison is also demonstrated on the expected degassing time to a certain required concentration. Based on the physical model results, the study found that rotor D had the highest degassing efficiency, followed by rotors F and A. Rotors B and E had similar efficiency at a flow rate of 17 Nl·min−1. However, rotor B showed better efficiency at higher inert gas flow rates (19 and 21 Nl·min−1), while rotor E showed better efficiency at lower flow rates (13 and 15 Nl·min−1). [ABSTRACT FROM AUTHOR]