Search

Zinc metal anodes in aqueous electrolytes commonly face challenges such as dendrite growth and undesirable side reactions, limiting their application in the field of aqueous zinc-ion batteries (AZIBs) for energy storage. Drawing inspiration from industrial practices involving molybdenum salt solutions for metal modification, a polyoxometalate solution was formulated as a passivation solution for zinc anodes (referred to as MO solution). The formed passivation layer, referred to as the MO layer, exhibited a uniform and protective nature with a thickness of approximately 10 μm. The experimental results demonstrated that this passivation layer effectively suppressed side reactions at the zinc anode interface, as evidenced by lower corrosion current density for MO-Zn anodes. Additionally, the newly plated Zn was uniformly deposited atop the MO layer, ensuring coating integrity and inhibiting dendrite growth. As a result, under more demanding conditions such as a larger current of 8 mA cm -2 , the MO-Zn anode displayed an extended cycle life exceeding 420 h in a symmetric battery, with an overpotential as low as 98 mV. This performance significantly outperformed that of commercially available pure Zn foils (with a cycle life of 60 h and an overpotential of 192 mV). Notably, a self-made Na-doped V 2 O 5 served as the cathode (referred to as NaVO), forming the MO-Zn//NaVO full battery. Even under high current test conditions of 2 A/g, the specific capacity of the MO-Zn//NaVO full battery remained substantial at 152.83 mAh/g after 1000 cycles. Furthermore, pouch batteries assembled with NaVO//MO-Zn successfully illuminated small bulbs. This study offers a viable optimization strategy for AZIB anodes and demonstrates the potential of using polyoxometalate solution for etching zinc anodes to inhibit dendrite growth and interfacial corrosion of zinc metal anodes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Precursor method is a well-known technology for preparing certain functional materials. In this work, a novel 3d-4f bimetallic organic framework, denoted as 45MCeCo (45 M representing 4,5-imidazole dicarboxylic acid), was successfully synthesized via a hydrothermal technique. The compound thus obtained has the molecular formula of C 10 H 11 CeCoN 4 O 12 . By meticulously controlling the amounts of the experimental materials, it was feasible to prepare flower-like crystals possessing identical single crystal structures and significantly larger specific surface areas. As a precursor for electrode materials, this structure underwent calcination at different temperatures to prepare Co 3 O 4 /CeO 2 composites with in situ composite heterostructures. Post-electrochemical tests revealed that CeO 2 remains unreactive across all potentials, thereby contributing to the stabilization of the electrode material structure. In contrast, Co 3 O 4 participated in redox reactions to provide a specific capacity to the sample. In addition, when comparing the performance of the electrode material under different calcination conditions, it became evident that the material exhibited optimal electrochemical performance when subjected to a temperature of 700 °C for 2 h., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Aqueous zinc-ion batteries (AZIBs) have caused significant research attention due to their low redox potential of 0.76 V, high theoretical capacity of 820 mAh g -1 . However, the dendrite growth of zinc anode and the side reactions caused by water seriously affect the cycle life of AZIBs. To solve the above problems, a new method of etching zinc anodes with CuCl 2 salt solution was designed, which the zinc anode was named CZn. The process resulted to a uniformly distributed micro gully morphology on the zinc surface, and providing an increased number of nucleation sites for zinc deposition and reducing local current density. The calculation results of exchange current density and activation energy show that CZn has stronger Zn/Zn 2+ kinetic effect. At a current density of 5 mA cm -2 and an area capacity of 5 mAh cm -2 , cycle life of the CZn symmetrical cell can reach 500 h, which is more than seven times that of the raw Zn symmetrical cell. This work proposes a simple method of zinc anode protection, which provides a new idea for zinc metal anode protection., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Aqueous zinc ion batteries (AZIBs) are receiving broad attention owing to their high safety and low cost. However, the high mechanical strength and irreversible growth of zinc dendrites limit the practical application of AZIBs. Herein, regular mesh-like gullies are built on the surface of zinc foil (M150 Zn) by using simple model pressing method and stainless steel mesh as a mold. Due to the charge-enrichment effect, zinc ion deposition and stripping will be preferentially carried out in the grooves to keep the outer surface flat. In addition, zinc is exposed to 002 crystal surface in the gully after being pressed, and the deposited zinc is more inclined to grow at a small angle, so that it has a sedimentary morphology parallel to the basement. Consequently, at a current density of 0.5 mA cm -2 , the M150 zinc anode has a voltage hysteresis of only 35 mV and a cycle life of up to 400 h (relative to a zinc foil of 96 mV and 160 h). Even more imposing is that the full cell has a capacity retention of approximately 100% after 1000 cycles at 2 A g -1 and a specific capacity of almost 60 mAh g -1 when activated carbon is used as the cathode. It is a promising method to improve the stable cycle performance of AZIBs by using a simple method to realize the non-prominent dendrites on the surface of zinc electrode., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Biomass-derived carbon (BC) has attracted extensive attention as anode material for lithium ion batteries (LiBs) due to its natural hierarchical porous structure and rich heteroatoms that can adsorb Li + . However, the specific surface area of pure biomass carbon is generally small, so we can help NH 3 and inorganic acid produced by urea decomposition to strip biomass, improve its specific surface area and enrich nitrogen elements. The nitrogen-rich graphite flake obtained by the above treatment of hemp is named NGF. The product that has a high nitrogen content of 10.12% has a high specific surface area of 1151.1 m 2  g -1 . In the lithium ion battery test, the capacity of NGF is 806.6 mAh g -1 at 30 mA g -1 , which is twice than that of BC. NGF also showed excellent performance that is 429.2 mAh g -1 under high current testing at 2000 mA g -1 . The reaction process kinetics is analyzed and we found that the outstanding rate performance is attributed to the large-scale capacitance control. In addition, the results of the constant current intermittent titration test indicate that the diffusion coefficient of NGF is greater than that of BC. This work proposes a simple method of nitrogen-rich activated carbon, which has a significantly commercial prospect., (© 2023 Wiley-VCH GmbH.)

Backgruound: The common reference intervals (RIs) for thyroid hormones currently used in China are provided by equipment manufacturers. This study aimed to establish thyroid hormone RIs in the population of Lanzhou, a city in the subplateau region of northwest China, and compare them with previous reports and manufacturer-provided values., Methods: In total, 3,123 individuals (1,680 men, 1,443 women) from Lanzhou, an iodine-adequate area of China, perceived as healthy were selected. The Abbott Architect analyzer was used to determine the serum concentration of thyroid hormones. The 95% RI was estimated using the 2.5th and 97.5th percentiles as the lower and upper reference limits, respectively., Results: The serum levels of thyroid-stimulating hormone (TSH), total triiodothyronine (TT3), antithyroglobulin (ATG) antibody, and antithyroid peroxidase (ATPO) antibody levels were significantly correlated with sex (P<0.05). TSH, total thyroxine (TT4), and ATPO levels were significantly correlated with age (P<0.05). The serum levels of TSH, ATG, and ATPO in men were significantly lower than in women; in contrast, the serum TT3 level was significantly higher in men than in women (P<0.05). Serum TSH, TT3, TT4, and ATG levels differed across age groups (P<0.05), but no such variation was observed for ATG levels (P>0.05). The established RIs of TSH, ATG, and ATPO in this study differed between sexes (P<0.05). The thyroid hormone RIs established herein were inconsistent with the manufacturer-provided values., Conclusion: The RIs of thyroid hormones in the healthy population of Lanzhou were inconsistent with those in the manufacturer's manual. Validated sex-specific values are required for diagnosing thyroid diseases.

The low ionic conductivity at room temperature and poor dimensional stability at high temperature of polyethylene oxide (PEO)-based solid electrolytes greatly limit the development and utilization of solid polymer electrolytes (SPEs). To reconcile the contradiction between electrochemical performance and mechanical strength of PEO-based SPEs, a cross-linking structure with active -CH 2 CH 2 O- soft chains that doped with rigid segments is designed and prepared through a method of green ultraviolet irradiation without solvent. The obtained solid film shows a high ionic conductivity of 0.2 mS·cm -1 and an ionic transference number of 0.51 at room temperature. The activation energy value of 1.92 kJ·mol -1 gives evidence for a favorable migration mechanism of PTP-SPE. A combination of flexibility and strength can be realized by molecular structure design with a tensile elongation of 40%. The reversible overpotential in galvanostatic cycling over 500 h of a Li||Li symmetrical cell indicates that the compact PTP-SPE can inhibit the formation of lithium dendrites. This work provides a new strategy for designing high-performance composite solid electrolytes at room temperature., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Because of different atomic arrangements and/or different exposed atoms on different surfaces of crystalline particles, different physical and chemical properties can be resulted and exhibited. In this work, we prepared BiOCl with {110} crystal facet by introducing urea as the structure-directing agent, and constructed oxygen vacancies (OVs) in BiOCl (110) to form BiOCl (110)-OV. Control of exposure surface can improve photocatalyst activity and the defect level caused by OVs can improve charge separation and light absorption, thereby further enhancing the production of free radicals and the activation of pollutants. Due to the synergistic effect of the hierarchical microsphere structure of BiOCl and OVs, the degradation rate of tetracycline hydrochloride (20 mg/L) in the presence of BiOCl (110)-OV can reach 95.1% after 15 min of the simulated sunlight illumination. This research provides novel ideas for the design and development of photocatalyst with hierarchical structure and oxygen vacancy defects., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

High electron transfer rates and a higher number of electron transfer active sites play important roles in inhibiting the recombination of photogenerated electron-hole pairs. In the experiments described in this article, the g-C 3 N 4 /BC/Bi 25 FeO 40 composite material was prepared to use biochar (BC) as the conductive channel. The presence of BC significantly increases the electron transfer rate due to its excellent electrical conductivity and can provide more electron transfer active sites. At the same time, BC provides a larger surface area and has a loose porous structure, which lead to excellent adsorption performance. Based on various characterization results, it was confirmed that the Z-scheme heterojunction was successfully constructed between g-C 3 N 4 and Bi 25 FeO 40 . The photocatalytic experiment results showed that the degradation efficiency of g-C 3 N 4 /BC/Bi 25 FeO 40 on the tetracycline hydrochloride (TCH) could reach 92.2% within 60 min. Parameters such as circulation stability, pH value of the solution and the amount of composite materials were studied. The synthesized composite material has good reusability and high efficiency in a wide pH range of 3-11. Its excellent photocatalytic activity is attributed to the formation of an effective Z-scheme heterostructure, as well as the rapid photoelectron transfer and excellent adsorption capacity of BC. This work provides a way to design new photocatalysts using semiconductor composite materials and BC materials., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Mesoporous ZnCo 2 O 4 microsheets are successfully obtained by using a MOF as a precursor. Benefiting from the special structure with favorable electron-transfer and Li-ion diffusion properties, the sample calcined at 600 °C exhibits superior lithium storage capacity of 816.2 mA h g -1 at 100 mA g -1 after 100 cycles, which has great application potential.