Search

Earplugs' comfort is primarily evaluated through cost-effective laboratory evaluations, yet these evaluations often inadequately capture the multidimensional comfort aspects due to design limitations that do not replicate real-world conditions. This paper introduces a novel laboratory method for comprehensive assessment of the multidimensional comfort aspects of earplugs, combining questionnaire-based evaluations and objective perceptual tests within virtual industrial sound environments replicating in-situ noise exposure. Objective perceptual results confirm that the sound environment affect participants' ability to detect alarms in a noisy environment and comprehend speech-in-noise while wearing earplugs. Subjective questionnaire results reveal that the earplugs family has an effect on the primary attributes of the acoustical, physical and functional comfort's dimension. Participants reported the physical dimension as the most important factor they take into account when evaluating earplugs' comfort. The functional dimension was considered the second most important factor by the participants, followed by the psychological dimension, and the acoustical dimension., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

This paper proposes a quick and straightforward technique for estimating the insertion loss (IL) of earplugs measured on an acoustical test fixture (ATF) using a commercial impedance tube. In this method, the earplug's acoustic properties (i.e., its transmission loss and the reflection coefficient of its medial surface) are determined from its transfer matrix measured using the three-microphones impedance tube method modified here for the current application. The IL is then estimated using a one-dimensional analytical model of open and occluded earcanals based on the wavefield decomposition theory. The method is evaluated numerically and experimentally from 50 Hz to 6.5 kHz. The numerical study allows for verifying the accuracy of the proposed approach in comparison to a simplified model of an ATF earcanal excited by normal incidence plane wave and diffuse field excitation. The experimental evaluation, which involves six earplugs (including five commercially available ones) representing various earplug families, demonstrates the accuracy of the estimation method, yielding results with a maximum difference of 3 dB compared to ATF measurements, on average, among the tested earplugs., (© 2024 Acoustical Society of America.)

Objective: Evaluate the ability of an extended version of the 3 M TM Eargage to estimate the earcanal size and assess the likelihood that a particular earplug can fit an individual's earcanal, ultimately serving as a tool for selecting earplugs in the field., Design: Earcanal morphology, assessed through earcanal earmolds scans, is compared to earcanal size assessed with the extended eargage (EE) via box plots and Pearson linear correlations coefficients. Relations between attenuation measured on participants (for 6 different earplugs) and their earcanal size assessed with the EE are established via comparison tests., Study Sample: 121 participants exposed to occupational noise (103 men, 18 women, mean age 47 year s )., Results: The earcanal size assessed with the EE allows for estimating the area of the earcanal's first bend cross-section (correlation coefficient   r = 0.533, p  < 0.001). Extremely large earcanals (12.7% of earcanals in our sample) lead to significantly lower earplug attenuation (potentially inadequate) than smaller earcanals., Conclusions: The EE is a simple and inexpensive tool easily deployable in the field to assist earplugs selection. When extended with sizes larger than the maximum size of the commercial tool, it allows for detecting individuals with extremely large earcanals who are most likely to be under-protected.

The area-averaged effective sound absorption coefficient (SAC) of a rigid-backed homogeneous porous material subjected to a monopole excitation is calculated as the absorbed-to-incident sound power ratio. Using Allard's model to describe the sound propagation above the porous material, an analytical model for this power-based SAC is proposed and proves to give a good approximation of the sound absorption performance under monopole excitation of sufficiently large areas of material. The impact of factors on the power-based SAC, such as monopole height, material radial dimension used to calculate the sound powers, and material properties is discussed. The power-based SAC frequency-dependent behavior is analyzed through sound intensity field assessments at the material surface and is compared to normal incident plane wave and diffuse field SACs. The sound absorption behavior of sound absorbers under monopole excitation exhibits notable distinctions and peculiar results compared to those observed under plane wave and diffuse fields, particularly at low frequencies and for sources close to the material., (© 2024 Acoustical Society of America.)

The occlusion effect (OE) denotes the increased low-frequency perception of bone-conducted sounds when the ear canal (EC) is occluded. Circuit and finite element (FE) models are commonly used to investigate the OE and improve its prediction, often applying acoustic impedances at the EC entrance and tympanic membrane (TM). This study investigates the sound generation caused by the structural motion of the EC. In addition to the EC wall vibration, it accounts for the motions of the EC entrance and TM, resulting from nondeforming motion of the surrounding structures. A model extension including these motions with the impedances is proposed. Related mechanisms are illustrated based on a circuit model. Implications are discussed by using an EC motion extracted from a FE model of a human head. The results demonstrate that the motions of the EC entrance and TM, addressed by the proposed extension, affects the TM sound pressure and may lead to a reduction of the OE at lower frequencies compared to solely considering the EC wall vibration. Accordingly, this phenomenon potentially reconciles differences between experimental data and OE simulations at frequencies below about 250 Hz, highlighting the importance to discern between multiple contributing mechanisms to the TM sound pressure., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)

The use of passive earplugs is often associated with the occlusion effect: a phenomenon described as the increased auditory perception of one's own physiological noise at low frequencies. As a notable acoustic discomfort, the occlusion effect penalizes the use and the efficiency of earplugs. This phenomenon is objectively characterized by the increase in sound pressure level in the occluded ear canal compared to the open ear canal. Taking inspiration from acoustic metamaterials, a new design of a three-dimensional printed "meta-earplug," made of four Helmholtz resonators arranged in series, is proposed for achieving near zero objective occlusion effect measured on artificial ear in a broadband frequency range (300 Hz to 1 kHz). For this purpose, the geometry of the meta-earplug is optimized to achieve a null occlusion effect target based on an analytical model of the phenomenon. It results from the optimization process that the input impedance of the meta-earplug medial surface approximately matches the input impedance of the open ear canal, weighted by the ratio of volume velocity imposed by the ear canal wall to the ear canal cavity between open and occluded cases. Acoustic properties of the meta-earplug are also shown to significantly improve its sound attenuation at the piston-like mode of the system., (© 2023 Acoustical Society of America.)

Acoustic imaging can be performed using a spherical microphone array (SMA) and conventional beamforming (CBF) or spherical harmonic beamforming (SHB). At low frequencies, the mainlobe width depends on the SMA radius for CBF and on the order of the spherical harmonics expansion for SHB, which is related to the number of microphones. In this letter, Kriging is used to virtually increase the SMA radius and/or the number of microphones. Numerical and experimental investigations show the effectiveness of Kriging to reduce the mainlobe width and thus improve the acoustic images obtained with a SMA and CBF or SHB., (© 2023 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)

Designing earplugs adapted for the widest number of earcanals requires acoustical test fixtures (ATFs) geometrically representative of the population. Most existing ATFs are equipped with unique sized straight cylindrical earcanals, considered representative of average human morphology, and are therefore unable to assess how earplugs can fit different earcanal morphologies. In this study, a methodology to cluster earcanals as a function of their morphologies with the objective of designing artificial ears dedicated to sound attenuation measurement is developed and applied to a sample of Canadian workers' earcanals. The earcanal morphologic indicators that correlate with the attenuations of six models of commercial earplugs are first identified. Three clusters of earcanals are then produced using statistical analysis and an artificial intelligence-based algorithm. In the sample of earcanals considered in this study, the identified clusters differ by the earcanal length and by the surface and ovality of the first bend cross section. The cluster that comprises earcanals with small girth and round first bend cross section shows that earplugs induced attenuation significantly higher than the cluster that includes earcanals with a bigger and more oval first bend cross section.

Passive earplugs are used to prevent workers from noise-induced hearing loss. However, earplugs often induce an acoustic discomfort known as the occlusion effect. This phenomenon corresponds to an increased auditory perception of the bone-conducted part of physiological noises at low-frequency and is associated with the augmentation of the acoustic pressure in the occluded earcanal. In this work, we report a new concept of passive earplugs for mitigating the occlusion effect between 100 Hz and 1 kHz. The strategy consists in reducing the input impedance of the earplug seen from the earcanal by using quasi-perfect broadband absorbers derived from the field of meta-materials. The proposed "meta-earplug" is made of 4 critically coupled Helmholtz resonators arranged in parallel. Their geometry is optimized using an evolutionary algorithm associated with a theoretical model of the meta-earplug input impedance. The latter is validated against a finite-element approach and impedance sensor measurements. The meta-earplug is manufactured by 3D printing. Artificial test fixtures are used to assess the occlusion effect and the insertion loss. Results show that the meta-earplug induces an occlusion effect approximately 10 dB lower than foam and silicone earplugs while it provides an insertion loss similar to the silicone earplug up to 5 kHz., (© 2022. The Author(s).)

The occlusion effect (OE) occurs when the earcanal becomes occluded by an in-ear device, sometimes leading to discomforts experienced by the users due to the augmented perception of physiological noises, or to a distorted perception of one's own voice. The OE can be assessed objectively by measuring the amplification of the low-frequency sound pressure level (SPL) in the earcanal using in-ear microphones. However, as revealed by methodological discrepancies found in past studies, the measurement of this objective occlusion effect (OE obj ) is not standardized. With the goal of proposing a robust yet simple methodology adapted for field assessment, three experimental aspects are investigated: (i) stimulation source and the stimulus's characteristics to induce the phenomenon, (ii) measurement method of the SPL in earcanal, (iii) indicator to quantify the OE obj . To do so, OE obj is measured on human participants in laboratory conditions. Results obtained with a specific insert device suggest using the participant's own voice combined with simultaneous measurements of the SPLs based on the noise reduction method and using a single value indicator leads to a simple yet robust methodology to assess OE obj . Further research is necessary to validate the results with other devices and to generalize the methodology for field assessment.

Objective . This article proposes a comprehensive literature review of past works addressing hearing protection device (HPD) comfort with the aim of identifying the main sources of variability in comfort evaluation. Methods . A literature review of study samples was performed: documents were hand searched and Internet searched using PubMed, Web of Science, Google Scholar, ProQuest Dissertations and Theses Professional, Scopus or Google search engines. While comfort constructs and measurement methods are reviewed for both earplugs and earmuff HPD types, results and analyses are provided for earplugs only. Results . The literature shows that the multiple sources of the perceived comfort measurement variability are related to the complexity of the concept of comfort and to the various physical and psychosocial characteristics of the triad 'environment/person/earplug', which differ from one study to the other. Conclusions . Considering the current state of knowledge and in order to decrease comfort measurements variability, it is advised to: (a) use a multidimensional construct of comfort and derive a comfort index for each comfort dimension;, (b) use exhaustive and valid questionnaires; (c) quantify as many triad characteristics as possible and use them as independent or control variables; (d) assess the quality of the earplug fitting and the attenuation efficiency.

The sound attenuation of double hearing protectors (DHPs), earplugs combined with earmuffs, generally falls short of the sum of each single protector's attenuation when used independently. This phenomenon, referred to as the DHP effect, is found to be related to structure-borne sound transmission involving the outer ear and can also be observed on acoustic test fixtures (ATFs). At present, it still remains not fully understood, and no available model can help demonstrate the associated sound transmission mechanisms. In this work, a finite element model is proposed to study the DHP effect on an ATF between 100 Hz and 5 kHz. Power balances are calculated with selected configurations of the ATF in order to (i) quantify the contribution of each sound path, and study the effects of (ii) the artificial skin and (iii) acoustic excitation on the ATF exterior boundaries. The DHP effect is shown to originate from the structure-borne sound power injected from the ATF boundaries and/or earmuff cushion. The important influence of earcanal wall vibration is highlighted when the skin is accounted for. The simulation results allow for gaining more insight into the sound transmission through a DHP/ATF system.

The occlusion effect (OE) refers to the phenomenon that more bone-conducted physiological sounds are transmitted into the earcanal when it is blocked and may cause discomfort on users of hearing protection devices. Models have been proposed to study the OE as they can help understand the physical mechanisms and can be used to evaluate the individual contribution on the OE of the factors that may affect it (i.e., occlusion device, ear anatomy, and stimulation). The existing finite element models developed to study the OE are limited by their truncated ear geometries. In order to progress in the understanding of the OE, the goal of this paper is to develop a finite element model of an entire head to predict the sound pressure field in its earcanals, open or occluded by earplugs. The model is evaluated by comparing the computed input mechanical impedances and OEs in various configurations with literature data. It is able to reproduce common behavior of the OE reported in the literature. In addition, the model is used to assess the effects on the simulated OEs of several parameters, including the modeling of the external air, the boundary condition at the head base and the material properties.