Search

A partire dal 2007 è stata avviata dal Ministero della Salute, nell'ambito delle procedure del Comitato LEA (Livelli Essenziali di Assistenza) per l'appropriatezza, l'efficienza e la congruità delle prestazioni erogate dal Servizio Sanitario Nazionale (SSN), una valutazione annuale, tramite indicatori quali/quantitativi, dell'efficienza operativa dei Servizi regionali di sicurezza alimentare e sanità pubblica veterinaria. Nel presente lavoro sono descritti i principi di riferimento, le modalità e gli aspetti più significativi emersi nel corso di tale esperienza durata oltre un decennio.Il sistema di valutazione ha contribuito all'evoluzione del processo di programmazione, a livello nazionale, regionale e locale, e ha avuto evidenti riflessi positivi mostrandosi come un punto di riferimento per quantificare le risorse umane e strumentali, e per la capacità di laboratorio, contribuendo alla chiarezza e coordinamento delle amministrazioni sanitarie sugli obiettivi operativi valutati.L'adozione di un articolato strumento di management ha inoltre offerto utili informazioni ai decisori (policy-makers) nella fase di contrazione del finanziamento e di ricambio generazionale che ha interessato il SSN dal 2008, e che si protrae tuttora1. 1 4° Rapporto GIMBE sulla sostenibilità del Servizio Sanitario Nazionale. Fondazione GIMBE: Bologna, giugno 2019; pp. 64-65. Recuperato da: https://salviamossn.it/var/uploads/contenuti/allegati/4_Rapporto_GIMBE_Sostenibilita_SSN.pdf.

Taxonomy of the South American Portulaca is advancing considerably but many problems and knowledge gaps still remain. As a result of further investigation of the genus, P. ferricola is here proposed as new name to replace, at species rank, the hitherto overlooked P. mucronulata var. microphylla. P. ferricola is a species endemic to ironstone grasslands from eastern Bolivia and central-western Brazil, whose conservation status is here assessed as Endangered (EN). In addition to a discussion of the taxonomy, ecology, and conservation status of the species, we also provide photographs of herbarium specimens and the species in natura.

Structural safety assessment of urbanised areas exposed to seismic risk is a complex task and can be approached at different scales. Fragility functions are the most effective tool to perform an estimation of the structural risk, since they describe the exceeding probability of the limit state of interest given a level of ground shaking. The formulation of a fragility function is based on the selection of an Intensity Measure of the ground shaking, commonly represented by peak-ground or spectral parameters or by macroseismic intensity grades. In the present paper, a novel approach to estimate the seismic vulnerability at a large scale of urbanised areas is presented. The scenario earthquakes are selected according to the current formulation of the seismic hazard disaggregation provided by National and International codes, i.e. through the disaggregation in terms of magnitude (M), epicentral distance (R) and number of standard deviation from the median ground motion (ε). To this aim, a vectorial seismic Intensity Measure is assumed to compute structural safety at large scale, and a change of variables is made to turn the traditional fragility curve into a matrix. Typological fragility matrices are processed and combined to define the so-called Urban Fragility Matrices, representative of the vulnerability of selected urban sectors. The procedure is then implemented and validated referring to the city of Pozzuoli (Southern Italy) and its effectiveness validated with reference to the damage survey relative to the 4th October 1983 seismic event which struck the city, resulting a good matching between predicted and observed scenarios.

This paper focuses on seismic fragility and damage scenario assessment of minor Italian historical centres through the development of urban fragility curves. With reference to the case study of Balvano, a small centre located in Basilicata Region of Italy, two hybrid models have been adopted. The first is a mechanic-based hybrid model developed by the authors to derive urban fragility curves specifically; the second is the macroseismic method, originally conceived to derive typological fragility curves for single building classes, expanded to derive urban fragility curve herein. Balvano was strongly struck by 1980 Irpinia-Basilicata earthquake (Ms = 6.90) and hence subjected to an intense reconstruction process during 1980s, where almost the 80% of the buildings were reconstructed with reinforced concrete structures in the place of unreinforced masonry ones. Seismic vulnerability and damage scenarios before and after 1980 have been assessed and compared with the purpose of validating the effectiveness of the urban scale fragility curves obtained through hybrid methodologies and quantifying the effect of the ‘new’ seismic hazard maps and first seismic codes and recommendations released by the Italian Government in the aftermath of 1980 for the construction of new buildings or for retrofitting the existing ones. A good matching between predicted and occurred damage scenario from the research outcomes emerged, confirming the effectiveness of the urban scale hybrid fragility curves to assess seismic vulnerability at urban scale. Moreover, the comparison of the damage scenarios pre and post-reconstruction highlighted the crucial role played by the code prescriptions adopted in that years for reducing the seismic vulnerability of the municipality and the importance of the ‘new’ seismic hazard maps introduced in 1980s. Finally, the differences between mechanical-based hybrid and macroseismic model have been discussed in the paper.

This paper investigates the role of the horizontal axial force on the in-plane shear and flexural strength of masonry spandrels subjected to seismic actions. Strength criteria included in the main national and international codes take into account for geometrical and material properties, but valuable considerations about the influence of the horizontal axial force are missing. Nevertheless, experimental programs and post-earthquake damage scenarios proved that the horizontal axial force within the spandrels can be also significant under seismic actions, especially when they are surrounded by strength and stiff vertical piers or when significantly compressed by the effect of tensile-resistant elements. As main purpose, the strength criteria proposed by the Italian code for the spandrels have been revised accounting for the effect of the horizontal axial force on its shear and flexural strength. A database containing experimental tests conducted on masonry spandrels was elaborated and used to compare experimental with theoretical results. Outcomes showed that the revised criteria match satisfactorily the experimental results when significant axial forces affect the spandrels, both in terms of strength and failure mechanism. Contrariwise, existing code formulations are representative for the spandrels subjected to low axial force such that rocking or pure shear mechanisms tend to prevail.

This paper investigates the feasibility of employing timber pegged joints in modern seismic-resistant structures or for retrofitting existing structures. The behavior of timber pegged connections has been investigated for about twenty years, but seismic design aspects are not treated in existing standards. In the framework of the force-based design approach, this paper analyzes and defines seismic design aspects and rules for timber pegged connections that are easy-to-use in engineering practice. A large database (more than 350 test results) has been elaborated and the data processed with the purpose of (1) analyzing the effectiveness of the European Yield Model for evaluating the maximum strength of the connection, accounting for the particular embedding behavior due to the presence of timber peg; (2) assessing and defining the capacity design rules to design the dissipative regions (i.e., overstrength factor); and (3) defining the available ductility of the connection with identification of ductility class intervals. The obtained results proved that timber pegged joints have a good potential to be used in seismic-resistant structures. In fact, data processing identified a suitable value for the overstrength factor (useful to project the joint with the capacity design) similar to that used for steel-dowelled connections, and defined a likelihood range of ductility classes. Finally, it is highlighted that the European Yield Model can be a practical tool to calculate connection strength, provided that some modifications are included to consider peg behavior.

In 2007 the Italian National Research Council published the technical document CNR-DT 206/2007 “Instructions for the design, execution and control of timber structures”, with the purpose to provide a technical support to the operators of the sector, in line with the most advanced knowledge at that time. Since then, the world of timber engineering has largely used such document, even though the instructions are not mandatory standard rules, so that they became the most common tool in Italy for the structural use of timber, opening the markets and favouring competition and new applications. In latest years new studies, researches and innovative proposals have promoted the development and the growth of timber constructions also in the civil residential field. The framework of standard rules for constructions and products, both Europeans and Italians, has evolved too. For these reasons, CNR has considered as opportune to proceed to the editing of a new version, updated and widened, namely with the acronym DT 206-R1. The document comes from the spontaneous cooperation of an open group of specialists and operators of the sector, based on a wide discussion on the common scientific and technical expertise and knowledge. The current version has already taken into account the results of the public inquiry phase (concluded by now). The paper presents the main contents of the document, evidencing the innovations.