Search

Nanotechnology can offer a series of new “green” and eco-friendly methods for developing different types of nanoparticles, among which the development of nanomaterials using plant extracts (phytosynthesis) represents one of the most promising areas of research. This present study details the use of lavender flowers (Lavandula angustifolia Mill., well-known for their use in homeopathic applications) for the biosynthesis of silver nanoparticles with enhanced antioxidant and antibacterial properties. Several qualitative and quantitative assays were carried out in order to offer an image of the extracts’ composition (the recorded total phenolics content varied between 21.0 to 40.9 mg GAE (gallic acid equivalents)/g dry weight (d.w.), while the total flavonoids content ranged between 3.57 and 16.8 mg CE (catechin equivalents)/g d.w.), alongside modern analytical methods (such as gas chromatography-mass spectrometry—GC-MS, quantifying 12 phytoconstituents present in the extracts). The formation of silver nanoparticles (AgNPs) using lavender extract was studied by UV-Vis spectroscopy, Fourier-transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and dynamic light scattering (DLS)/zeta potential, with the selected nanoparticles having crystallite sizes of approx. 14.55 nm (AgNP-L2) and 4.61 nm, respectively (for AgNP-L4), and hydrodynamic diameters of 392.4 nm (for AgNP-L2) and 391.6 nm (for AgNP-L4), determined by DLS. A zeta potential of around −6.4 mV was displayed for both samples while presenting as large aggregates, in which nanoparticle clusters with dimensions of around 130–200 nm can be observed. The biomedical applications of the extracts and the corresponding phytosynthesized nanoparticles were evaluated using antioxidant and antimicrobial assays. The obtained results confirmed the phytosynthesis of the silver nanoparticles using Lavandula angustifolia Mill. extracts, as well as their antioxidant and antimicrobial potential.

Phytosynthesized selenium nanoparticles (SeNPs) are less toxic than the inorganic salts of selenium and show high antioxidant and antibacterial activity. Chitosan prevents microbial biofilm formation and can also determine microbial biofilm dispersal. Never-dried bacterial nanocellulose (NDBNC) is an efficient carrier of bioactive compounds and a flexible nanofibrillar hydrophilic biopolymer. This study aimed to develop a selenium-enriched hydrogel nanoformulation (Se-HNF) based on NDBNC from kombucha fermentation and fungal chitosan with embedded biogenic SeNPs phytosynthesized by an aqueous extract of sea buckthorn leaves (SbLEx)—SeNPsSb—in order to both disperse gingival dysbiotic biofilm and prevent its development. We determined the total phenolic content and antioxidant activity of SbLEx. Liquid chromatography–mass spectrometry (LC-MS) and high-performance liquid chromatography (HPLC) were used for the identification of polyphenols from SbLEx. SeNPsSb were characterized by transmission electron microscopy–energy-dispersive X-ray spectroscopy (TEM-EDX), dynamic light scattering (DLS), zeta potential, Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) in small- and wide-angle X-ray scattering (SAXS and WAXS). The hydrogel nanoformulation with embedded SeNPsSb was characterized by SEM, FTIR, XRD, rheology, mucin binding efficiency, contact angle and interfacial tension measurements. We also assessed the in vitro biocompatibility, antioxidant activity and antimicrobial and antibiofilm potential of SeNPsSb and Se-HNF. TEM, DLS and SAXS evidenced polydisperse SeNPsSb, whereas FTIR highlighted a heterogeneous biocorona with various biocompounds. The contact angle on the polar surface was smaller (52.82 ± 1.23°) than that obtained on the non-polar surface (73.85 ± 0.39°). The interfacial tension was 97.6 ± 0.47 mN/m. The mucin binding efficiency of Se-HNF decreased as the amount of hydrogel decreased, and the SEM analysis showed a relatively compact structure upon mucin contact. FTIR and XRD analyses of Se-HNF evidenced an interaction between BNC and CS through characteristic peak shifting, and the rheological measurements highlighted a pseudoplastic behavior, 0.186 N adhesion force and 0.386 adhesion energy. The results showed a high degree of cytocompatibility and the significant antioxidant and antimicrobial efficiency of SeNPsSb and Se-HNF.

The objective of this work was to develop a sustainable process for the extraction of anthocyanins from red cabbage byproducts using, for the first time, apple vinegar in extractant composition. Our results showed that the mixture 50% (v/v) ethanol–water, acidified with apple vinegar, used in the proportion of 25 g of red cabbage by-products per 100 mL of solvent, was the best solvent for the preparation of an anthocyanin extract with good stability for food applications. The chemical characterization of this extract was performed by FTIR, UV-VIS, HPLC-DAD, and ICP-OES. The stability was evaluated by determining the dynamics of the total polyphenol content (TPC) and the total monomeric anthocyanin pigment content (TAC) during storage. On the basis of the statistical method for analysis of variance (ANOVA), the standard deviation between subsamples and the repeatability standard deviation were determined. The detection limit of the stability test of TPC was 3.68 mg GAE/100 g DW and that of TAC was 0.79 mg Cyd-3-Glu/100 g DW. The red cabbage extract has high TPC and TAC, good stability, and significant application potential. The extracted residues, depleted of anthocyanins and polyphenols with potential allelopathic risks, fulfill the requirements for a fertilizing product and could be used for soil treatment.

Inductively coupled plasma optical emission spectrometry (ICP-OES) analytical method was optimized to determine the micronutrient concentrations from the fertilizers used as inputs in organic farming. The calibration curves showed good linearity for all elements (R2 > 0.999). Recoveries were in the range of 94.9–97.9%. The values of extended uncertainty with a probability of 95% (k = 2) for the liquid organic fertilizer samples were between 0.004% for Mo and 0.12% for Fe. The results have shown good accuracy and reproducibility, and the optimized method was validated.

Biogenic selenium nanoparticles (SeNPs) have been shown to exhibit increased bioavailability. Fermentation of pollen by a symbiotic culture of bacteria and yeasts (SCOBY/Kombucha) leads to the release of pollen content and enhances the prebiotic and probiotic effects of Kombucha. The aim of this study was to fortify Kombucha beverage with SeNPs formed in situ by Kombucha fermentation with pollen. Response Surface Methodology (RSM) was used to optimize the biosynthesis of SeNPs and the pollen-fermented Kombucha beverage. SeNPs were characterized by Transmission electron microscopy energy-dispersive X-ray spectroscopy (TEM-EDX), Fourier-transform infrared spectroscopy (FTIR), Dynamic light scattering (DLS), and Zeta potential. The pollen-fermented Kombucha beverage enriched with SeNPs was characterized by measuring the total phenolic content, antioxidant activity, soluble silicon, saccharides, lactic acid, and the total content of Se0. The polyphenols were identified by liquid chromatography–mass spectrometry (LC-MS). The pollen and the bacterial (nano)cellulose were characterized by scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), FTIR, and X-Ray diffraction (XRD). We also assessed the in vitro biocompatibility in terms of gingival fibroblast viability and proliferation, as well as the antioxidant activity of SeNPs and the pollen-fermented Kombucha beverage enriched with SeNPs. The results highlight their increased biological performance in this regard.

Finding new molecules to prevent the growth of antimicrobial resistance is a hot topic for scientists worldwide. It has been reported that some raw bioproducts containing Monascus polyketides have antimicrobial activities, but extensive studies on this effect have not been conducted. In this context, our studies aimed to evaluate the antimicrobial properties of six raw bioproducts containing three classes of microbial polyketides biosynthesized by three Monascus strains through solid-state biosynthesis. As a methodology, we performed in silico predictions using programs such as PyMOL v3.0.4 and employed ESI-MS techniques to provide evidence of the presence of the six studied compounds in our bioproducts. The results obtained in silico were validated through in vitro studies using the Kirby-Bauer diffusion method on bacteria and fungi. The test performed in silico showed that Monascorubramine has the highest affinity for both Gram-positive and Gram-negative bacteria, followed by yellow polyketides such as Ankaflavin and Monascin. The estimated pharmacokinetic parameters indicated high gastrointestinal absorption and the potential to cross the blood-brain barrier for all studied compounds. However, the compounds also inhibit most enzymes involved in drug metabolism, presenting some level of toxicity. The best in vitro results were obtained for S. aureus, with an extract containing yellow Monascus polyketides. Predictions made for E. coli were validated in vitro for P. aeruginosa, S. enterica, and S. marcescens, as well as for fungi. Significant antibacterial properties were observed during this study for C. albicans, S. aureus, and fungal dermatophytes for crude bioproducts containing Monascus polyketides. In conclusion, the antimicrobial properties of Monascus polyketides were validated both in silico and in vitro. However, due to their potential toxicity, these bioproducts would be safer to use as topical formulations.

The ionic association constants of sodium with carbonate ion (K1C′) and acidic carbonate ions (K2C′) were measured in NaCl-NaHCO3-H2O ternary systems to determine the distribution of sodium among the chemical species present in the growth medium of Chlorella homosphaera 424 algae. The mean activity coefficients of sodium chloride (in pure sodium chloride and in a mixture of electrolytes) were determined experimentally using two electrochemical cells, namely Ag, AgCl| KCl (3 M)|| NH4NO3 (1 M)| NaCl (mNaCl)| Na+-ISE and Ag, AgCl|KCl (3 M)|| NH4NO3 (1 M)| NaCl (mNaCl)| Cl−-ISE. The studies carried out show that the values of the association constants of K1C′ and K2C′ do not depend on the composition of the medium, but only on the effective ionic strength. The experimentally obtained γNaCl0 values in the binary system are comparable to the mean activity coefficients values for NaCl, calculated using data from the literature, with −0.9 to 0.1% relative standard deviation. The obtained results show that the experimentally determined mean activity coefficient in the ternary system, γNaCl, is smaller than γNaCl0 in the binary system over the entire field of ionic strengths studied. The ternary system NaCl-NaHCO3-H2O obeys Harned’s rule.

Lavandula angustifolia is a medicinal plant with important benefits for the human body, exhibiting antimicrobial and antioxidants activities. Scientific data has detailed the fact that lavender extract presented favorable characteristics to health, such as antibacterial, antifungal, antidepressive and anticancer properties. The aim of this study was to establish the efficiency of extraction methods by identification and determination of compounds extracted from lavender plant. Different types of extraction were used: ultrasound (50 °C/2 h) and magnetic agitation (ambient temp/24 h) in pure ethanol and hydroalcoholic mixture (ethanol:ultrapure water = 50:50 v/v). GC-MS cromatograph equipment was utilised for detection and quantitative determination of lavender compounds extracted (ex. eucalyptol, linalool, camphor, terpinenol, linalylacetat, etc), an Elite-5MS (5% diphenyl methyl polysiloxane stationary phase) column and a linalool standard. Optimal GC-MS separation parameters were established. In conclusion, it was observed that lavender sample extracted in ethanol, through magnetic agitation at room temperature, represents production by a more efficient method than the others, because more compounds were observed (over 20) than in the other lavender extract samples (approximately 6).

Carbon materials, especially nanostructured ones, have well-known adsorbent properties due to their ability to establish covalent bonds, hydrogen bonds, hydrophobic, electrostatic, and π-π interactions [...]