Search

Using organic waste and residue streams to be turned into valuable and greener materials for various applications has proven an efficient and suitable strategy. In this work, two green materials (nanosponges and a polymer) were synthesized using potato peels and applied for the first time to adsorb and recover Neodymium (Nd 3+ ) from aqueous solutions. The recovery of Nd 3+ that belongs to the rare earth elements has attracted important interest due to its/their importance in several industrial and technological applications. The fine potato peel waste (FPPW) polymer presented an irregular shape and porous surface. At the same time, the β-cyclodextrin (β-CD) nanosponges had uniform distribution with regular and smooth shapes. β-CD nanosponges exhibited a much higher total carboxyl content (4.02 mmol g -1 ) than FPPW (2.50 mmol g -1 ), which could impact the Nd 3+ adsorption performance because carboxyl groups can interact with cations. The adsorption capacity increased with the increase of the pH, reaching its maximum at pHs 6-7 for β-CD nanosponges and 4-7 for FPPW polymer. The kinetic and equilibrium data were well-fitted by General order and Liu models. β-CD nanosponges attained adsorption capacity near 100 mg Nd per gram of adsorbent. Thermodynamic and statistical physical results corroborated that the adsorption mechanism was due to electrostatic interaction/complexation and that the carboxyl groups were important in the interactions. β-CD nanosponges (three cycles of use) were more effective than FPPW (one cycle of use) in the regeneration. Finally, β-CD nanosponges could be considered an eco-friendly adsorbent to recover Nd 3+ from aqueous matrices., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

There is a growing need to develop new strategies for rare earth element (REE) recovery from secondary resources. Herein, a novel approach to utilize biogenic silica (from rice husk) and metakaolin was employed to fabricate magnetic geopolymer (MGP) by incorporating metallic iron. The fabricated MGP adsorbent material was used to uptake Ce 3+ , La 3+ , and Nd 3+ from synthetic solutions and real phosphogypsum leachate in batch and column modes. The MGP offers a negatively charged surface at pH above 2.7, and the uptake of REEs rises from pH 3 to 6. The kinetic study validated that the kinetics was much faster for Nd 3+ , followed by La 3+ and Ce 3+ . A thermodynamic investigation validated the exothermic nature of the adsorption process for all selected REEs. The desorption experiment using 2 mol L -1 H 2 SO 4 as the eluent demonstrated approximately 100% desorption of REEs from the adsorbent. After six adsorption-desorption cycles, the MGP maintained a high adsorption performance up to cycle five before suffering a significant decrease in performance in cycle six. The effectiveness of MGP was also assessed for its applicability in recovering numerous REEs (La 3+ , Ce 3+ , Pr 3+ , Sm 3+ , and Nd 3+ ) from real leachate from phosphogypsum wastes, and the highest recovery was achieved for Nd 3+ (95.03%) followed by Ce 3+ (86.33%). The operation was also feasible in the column presenting suitable values of the length of the mass transfer zone. The findings of this investigation indicate that MGP adsorbent prepared via a simple route has the potential for the recovery of REEs from synthetic and real samples in both batch and continuous operations modes., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This study searched for the best synthesis route for producing an adsorbent from the alkaline fusion of volcanic rock powder waste. The samples synthesized under different conditions of temperature and alkalizing ratio/precursor material, nine in total (NP.F, NP.F1, NP.F2, ...NP.F8 ), were used in the adsorption of acid green 16 (AG 16) and acid red 97 (AR 97) dyes and Ag + , Co 2+ , and Cu 2+ ions. Subsequently, the 2 2 central composite rotational design (CCRD) was applied, and the effects of the alkalizing ratio (NaOH)/volcanic rock (VR) and temperature (T) on the synthesis process were analyzed in terms of their influence on the physical properties of the materials and in the process of adsorption of contaminants. From the experimental design, it can be seen that the independent variables alkalizing ratio/volcanic rock and temperature greatly influence the characteristic and synthesis of adsorbent materials by alkaline fusion, which in turn reflects on the results achieved in the adsorption of contaminants. Therefore, the temperature of 550 °C and NaOH/VR ratio equal to 1 was the most satisfactory synthesis route to obtain high values of adsorption capacity (q, mg g -1 ) and removal (R, %) for all studied contaminants, as well as the optimization of the physical characteristics of the material. For example, the adsorption capacity of dye AG 16 was 49.1 mg g -1 , and for Ag + was 66.2 mg g -1 , while the removal percentages were 97.6% and 93.4%, respectively. This approach made it possible to transform volcanic rock powder wastes into an efficient adsorbent to treat contaminated waters with dyes and metals., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The present study verified the potential of volcanic rock powder residues originating from the extraction of semi-precious rocks in the state of Rio Grande do Sul, Brazil, as precursors or adsorbents for dyes and metallic ion removal from water. In this way, it is possible to add value and give an adequate destination to this waste. Volcanic rock powder residues from Ametista do Sul (AME) and Nova Prata (NP) were the starting materials. These were used naturally or submitted to the alkaline activation process at 60 °C and alkaline fusion at 550 °C. The analysis of the starting samples by X-ray fluorescence (XRF) revealed that they are mainly composed of aluminum, calcium, iron, and silicon oxides, which corroborates the presence of numerous crystalline phases observed in the X-ray diffraction spectra (XRD). Moreover, by XRD analysis of the synthesized samples, alkaline fusion proved to be more efficient in the dissolution of crystalline phases and consequently in the formation of the amorphous phase (more reactive). Furthermore, the adsorption tests with acid green and acid red dyes and Ag + , Co 2+ , and Cu 2+ ions indicated the viability of using residual volcanic rock powder as raw material for the production of adsorbents functionalized with sodium hydroxide, being that the samples synthesized by alkaline fusion showed better results of removal and adsorption capacity for all the contaminants used in the study., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)