Search

Polyimide hybrid nanocomposites with the polyimide confined at molecular length scales exhibit enhanced fracture resistance with excellent thermal-oxidative stability at low density. Previously, polyimide nanocomposites were fabricated by infiltration of a polyimide precursor into a nanoporous matrix followed by sequential thermally induced imidization and cross-linking of the polyimide under nanometer-scale confinement. However, byproducts formed during imidization became volatile at the cross-linking temperature, limiting the polymer fill level and degrading the nanocomposite fracture resistance. This is solved in the present work with an easier approach where the nanoporous matrix is filled with shorter preimidized polyimide chains that are cross-linked while in the pores to eliminate the need for confined imidization reactions, which produces better results compared to the previous study. In addition, we selected a preimidized polyimide that has a higher chain mobility and a stronger interaction with the matrix pore surface. Consequently, the toughness achieved with un-cross-linked preimidized polyimide chains in this work is equivalent to that achieved with the cross-linking of the previously used polyimide chains and is doubled when preimidized polyimide chains are cross-linked. The increased chain mobility enables more efficient polymer filling and higher polymer fill levels. The higher polymer-pore surface interaction increases the energy dissipation during polyimide molecular bridging, increasing the nanocomposite fracture resistance. The combination of the higher polymer fill and the stronger polymer-surface interaction is shown to provide significant improvements to the nanocomposite fracture resistance and is validated with a molecular bridging model.

Intrinsically stretchable bioelectronic devices based on soft and conducting organic materials have been regarded as the ideal interface for seamless and biocompatible integration with the human body. A remaining challenge is to combine high mechanical robustness with good electrical conduction, especially when patterned at small feature sizes. We develop a molecular engineering strategy based on a topological supramolecular network, which allows for the decoupling of competing effects from multiple molecular building blocks to meet complex requirements. We obtained simultaneously high conductivity and crack-onset strain in a physiological environment, with direct photopatternability down to the cellular scale. We further collected stable electromyography signals on soft and malleable octopus and performed localized neuromodulation down to single-nucleus precision for controlling organ-specific activities through the delicate brainstem.

Background Neo-aortic pulmonary autografts often experience root dilation and valve regurgitation over time. This study seeks to understand the biomechanical differences between aortic and neo-aortic pulmonary roots using a heart simulator. Methods Porcine aortic, neo-aortic pulmonary, and pulmonary roots (n = 6) were mounted in a heart simulator (parameters: 100 mm Hg, 37 °C, 70 cycles per minute, 5.0 L/min cardiac output). Echocardiography was used to study root distensibility (percentage change in luminal diameter between systole and diastole) and valve function. Leaflet motion was tracked with high-speed videography. After 30 min in the simulator, leaflet thickness (via cryosectioning), and multiaxial modulus (via lenticular hydrostatic deformation testing) were obtained. Results There were no significant differences between aortic and neo-aortic pulmonary leaflet motion, including mean opening velocity (218 vs 248 mm/s, P = .27) or mean closing velocity (116 vs 157 mm/s, P = .12). Distensibility was similar between aortic (8.5%, 1.56 mm) and neo-aortic pulmonary (7.8%, 1.12 mm) roots ( P = .59). Compared to virgin controls, native pulmonic roots exposed to systemic pressure for 30 min had reduced leaflet thickness (630 vs 385 µm, P = .049) and a reduced Young's modulus (3,125 vs 1,089 kPa, P = .077). In contrast, the aortic roots exposed to pressure displayed no significant difference in aortic leaflet thickness (1,317 vs 1,256 µm, P = .27) or modulus (5,931 vs 3,631 kPa, P = .56). Conclusions Neo-aortic pulmonary roots demonstrated equivalence in valve function and distensibility but did experience changes in biomechanical properties and morphology. These changes may contribute to long-term complications associated with the Ross procedure.

We focus on the development and implementation of an environmental (hot-dry or hot-humid air) testing methodology for adhesively bonded laminates under maximum strain energy release rate (SERR) control. The technique overcomes disadvantages of displacement- and force-controlled fatigue crack growth testing. Fracture mechanics based double cantilever beam (DCB) specimens comprising steel/epoxy- and glass/polyolefin-laminates were investigated using an electrodynamic test system with automated software control. Crack length was evaluated in-situ with a compliance calibration approach. User-defined SERR values were set with a control channel. The SERR was changed every 200,000 cycles or after exceeding crack length milestones. For steel/epoxy-laminates with an adhesive thickness of approximately 5 µm a good agreement of crack growth rates was obtained by displacement and SERR control. Moreover, the negative effect of humidity (50% vs. 10% rh) on the fatigue delamination resistance was confirmed at 60 °C. In contrast, significant deviations of crack growth rates under displacement and SERR control were deduced for glass/polyolefin-laminates with an adhesive thickness of 250 µm under hot-dry (60 °C, 1% rh) conditions. The deviations were attributed to differences in the damage zone size for the soft polymeric adhesive. Under hot-humid (60 °C, 80% rh) conditions a reasonable agreement of displacement and SERR controlled test data was observed and attributed to a less pronounced damage zone and a failure of the glass/polyolefin-laminates in an interfacial manner. Version of record

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity. Agency for Science, Technology and Research (A*STAR) National Research Foundation (NRF) Submitted/Accepted version Y.L., Z.L., M.Z., and X.C. acknowledge the National Research Foundation, Singapore (NRF) under NRF’s Medium Sized Centre: Singapore Hybrid-Integrated Next-Generation μElectronics (SHINE) Centre funding programme, and AME programming funding scheme of Cyber Physiochemical Interface (CPI) project (no. A18A1b0045). Y.L. acknowledges National Natural Science Foundation of China (62201243). C.J. acknowledges funding support from the National Key R&D Program of China (no. 2019YFA0706100), the National Natural Science Foundation of China (82151305), Lingang Laboratory (LG-QS-202202-09). T.Q.T. and N.E.L. acknowledge support by the Basic Science Research Program (no. 2020R1A2C3013480) through the National Research Foundation of Korea (NRF) funded by the Ministry of Science and ICT. A.F. acknowledges the AFOSR (grant FA9550-22-1-0423). Y.L. and Y.Z. would like to acknowledge the NSF (award no. 2134664) and NIH (award no. R01HD108473) for financial support. X.F. acknowledges the support from the National Natural Science Foundation of China (grant no. U20A6001). L.Y. would like to thank the A*STAR Central Research Fund (CRF) and the AME Programmatic A18A1b0045 (Cyber Physiochemical Interfaces) for funding support. C.F.G. acknowledges the National Natural Science Foundation of China (no. T2225017). T.Q.T. acknowledges the Brain Pool Program (No. 2020H1D3A2A02111068) through the National Research Foundation (NRF) funded by the Ministry of Science. Z.L. acknowledges the support from RIE2020 AME Programmatic Grant funded by A*STAR-SERC, Singapore (Grant No. A18A1b0045). X.G. acknowledges funding support through the Shanghai Science and Technology Commission (grant no. 19JC1412400), the National Science Fund for Excellent Young Scholars (grant no. 61922057). C.D. acknowledges National Science Foundation CAREER: Conformable Piezoelectrics for Soft Tissue Imaging (grant no. 2044688) and MIT Media Lab Consortium funding. D.K. and O.G.S. acknowledge Leibniz Association and the German Research Foundation DFG (Gottfried Wilhelm Leibniz Program SCHM 1298/22-1, KA5051/1-1 and KA 5051/3-1), as well as the Leibniz association (Leibniz Transfer Program T62/2019). C.W. acknowledges the National Key Research and Development Program of China (grant no. 2021YFA1202600), National Natural Science Foundation of China (grant no. 62174082). A.V.-Y.T., E.Z., Y.Z., X.Z., and J.P. acknowledge the National Research Foundation, Singapore (NRF) under NRF’s Medium Sized Centre: Singapore Hybrid-Integrated Next-Generation μElectronics (SHINE) Centre funding programme, and AME programming funding scheme of Cyber Physiochemical Interface (CPI) project (no. A18A1b0045). R.Z. acknowledges National Natural Science Foundation of China (grant no. 51735007) and Beijing Natural Science Foundation (grant no. 3191001). N.M. acknowledges the support by JST PRESTO Grant Number JPMJPR20B7 and JST Adaptable and Seamless Technology transfer Program through Target-driven R&D (ASTEP) grant number JPMJTM22BK. C.P. acknowledges the Korean government (Ministry of Science and ICT, MSIT) (2022R1A4A3032923). M.W. acknowledges the National Key R&D Program of China under Grant (2021YFB3601200). X.Z. acknowledges National Natural Science Foundation of China (no. 62074029). S.X. acknowledges the 3M nontenured faculty award. T.-W.L. and D.-G.S. acknowledge the Pioneer Research Center Program through the National Research Foundation of Korea funded by the Ministry of Science, ICT & Future Planning (grant no. NRF-2022M3C1A3081211). C.T.L. would like to acknowledge support from the Institute for Health Innovation and Technology (iHealthtech), the MechanoBioEngineering Laboratory at the Department of Biomedical Engineering and the Institute for Functional Intelligent Materials (I-FIM) at the National University of Singapore (NUS). C.T.L. also acknowledges support from the National Research Foundation and A*STAR, under its RIE2020 Industry Alignment Fund − Industry Collaboration Projects (IAF-ICP) (grant no. I2001E0059) − SIA-NUS Digital Aviation Corp Lab and the NUS ARTIC Research (grant no. HFM-RP1). X.Y. acknowledges funding support by City University of Hong Kong (grant no. 9667221). T.X. and X.Z. acknowledge National Natural Science Foundation of China (22234006). B.C.K.T. acknowledges Cyber-Physiochemical Interfaces CPI, A*STAR A18A1b0045. H.G. acknowledges a research start-up grant (002479-00001) from Nanyang Technological University and the Agency for Science, Technology and Research (A*STAR) in Singapore. W.G. acknowledges National Science Foundation grant 2145802. D.J.L. acknowledges support from the US National Science Foundation grant number CBET-2223566. G.Y. acknowledges support from The Welch Foundation award F-1861, and Camille Dreyfus Teacher-Scholar Award. M.D.D. acknowledges funding support from NSF (grant no. EEC1160483). J.-H.A acknowledges the National Research Foundation of Korea (NRF-2015R1A3A2066337). J.C. acknowledges the Henry Samueli School of Engineering & Applied Science and the Department of Bioengineering at the University of California, Los Angeles for startup support and a Brain & Behavior Research Foundation Young Investigator Grant. K.T. acknowledges JST AIP Accelerated Program (no. JPMJCR21U1) and JSPS KAKENHI (grant no. JP22H00594). P.S.W. acknowledges the National Science Foundation (CMMI1636136) for support. A.M.A., M.C.H., and P.S.W. thank the National Institute on Drug Abuse (DA045550) for support. S.M. and X.C. appreciated the support from the Smart Grippers for Soft Robotics (SGSR) Programme under the National Research Foundation, Prime Minister’s Office, Singapore under its Campus of Research Excellence and Technological Enterprise (CREATE) programme.

Partial-thickness cutaneous injuries distributed over exposed body locations, such as the face and extremities, pose a significant risk of infection, function loss, and extensive scarring. These injuries commonly result from impact of kinetic debris from industrial accidents or blast weaponry such as improvised explosive devices. However, the quantitative connections between partial-thickness injuries and debris attributes (kinetic energy, shape, orientation, etc.) remain unknown, with little means to predict damage processes or design protection. Here we quantitatively characterize damage in near-live human skin after impact by debris-simulating kinetic projectiles at differing impact angles and energies. Impact events are monitored using high-speed and quantitative imaging to visualize skin injuries. These findings are utilized to develop a highly predictive, dynamic computational skin-injury model. Results provide quantitative insights revealing how the dermal-epidermal junction controls more severe wound processes. Findings can illuminate expected wound severity and morbidity risks to inform clinical treatment, and assess effectiveness of emerging personal protective equipment.

This study is motivated by the desire to disseminate a low-cost, high-precision, high-throughput environmental chamber to test materials and devices under elevated humidity, temperature, and light. This paper documents the creation of an open-source tool with a bill of materials as low as US$2,000, and the subsequent evolution of three second-generation tools installed at three different universities spanning thin films, bulk crystals, and thin-film solar-cell devices. We introduce an optical proxy measurement to detect real-time phase changes in materials. We present correlations between this optical proxy and standard X-ray diffraction measurements, describe some edge cases where the proxy measurement fails, and report key learnings from the technology-translation process. By sharing lessons learned, we hope that future open-hardware development and translation efforts can proceed with reduced friction. Throughout the paper, we provide examples of scientific impact, wherein participating laboratories used their environmental chambers to study and improve the stabilities of halide-perovskite materials. All generations of hardware bills of materials, assembly instructions, and operating codes are available in open-source repositories.

Ultrathin perfluoropolyether-silane (PFPE-silane) films offer excellent functionality as antifingerprint coatings for display touchscreens due to their oleophobic, hydrophobic, and good adhesion properties. During smartphone use, PFPE-silane coatings undergo many abrasion cycles which limit the coating lifetime, so a better understanding of how to optimize the film structure for improved mechanical durability is desired. However, the hydrophobic and ultrathin (1-10 nm) nature of PFPE-silane films renders them very difficult to experimentally characterize. In this study, the cohesive fracture energy and elastic modulus, which are directly correlated with hardness and better wear resistance of 3.5 nm-thick PFPE-silane films were, respectively, measured by double cantilever beam testing and atomic force microscopy indentation. Both the cohesive fracture energy and modulus are shown to be highly dependent on the underlying film structure. Both values increase with optimal substrate conditions and a higher number of silane groups in the PFPE-silane precursor. The higher cohesive fracture energy and modulus values are suggested to be the result of the changes in the film chemistry and structure, leading to higher cross-linking density. Therefore, future work on optimizing PFPE-silane film wear resistance should focus on pathways to improve the cross-linking density. Subcritical fracture testing in humid environments reveals that humidity negatively affects the fracture properties of PFPE-silane films.

To decode the feeling of skin tightness after application of a cosmetic product and how to soothe this discomfort. To pursue this aim, we considered the ingredient's effect on stratum corneum (SC) biomechanics to differentiate between consumers prone to tightness from those that are not and correlate these effects with mechanoreceptor activation.In vivo clinical trials were used to assess the tightness perception dichotomy between groups of Caucasian women; in vitro experiments were used to measure the mechanical stresses induced in the SC after cleanser and moisturizer application; and in silico simulations were used to illustrate how the measured mechanical stresses in the SC result in the development of strains at the depth of cutaneous mechanoreceptors, triggering tightness perceptual responses.Before any cream application, women prone to tightness tend to have a more rigid SC than their less sensitive counterparts, however cleanser application increases SC stiffness in all women. Surprisingly, no correlation was found between tightness perception and hydration measurements by the Corneometer or barrier function, as evaluated by transepidermal water loss. Self-declared tightness and dryness scores were strongly associated with a self-described sensitive skin. After application of the optimized moisturizing formula, Osmoskin® containing natural waxes with good filming properties, consumers report a strong decrease in tightness and dryness perception. These results match with laboratory experiments where the cleanser was shown to increase SC drying stresses by 34%, while subsequent application of Osmoskin® decreased stresses by 48%. Finite element modelling, using experimental results as input, elucidates the differences in perception between the two groups of women. It makes clear that Osmoskin® changes the mechanical status of the SC, producing strains in underlying epidermis that activates multiple cutaneous mechano-receptors at a level correlated with the self-perceived comfort.Integration of the in vivo, in vitro and in silico approaches provides a novel framework for fully understanding how skin tightness sensations form and propagate, and how these sensations can be alleviated through the design of an optimized moisturizer.Décoder l'impression de tiraillement de la peau après l'application d'un produit cosmétique et la manière d'apaiser cette sensation désagréable. Pour poursuivre cet objectif, nous avons pris en compte l'effet de l'ingrédient sur la biomécanique de la couche cornée afin de différencier les consommatrices sujettes à un tiraillement de celles qui ne le sont pas et de corréler ces effets avec l'activation des mécanorécepteurs. MÉTHODES: Des essais cliniques in vivo ont été utilisés pour évaluer la dichotomie de perception de tiraillement entre des groupes de femmes de race caucasienne; des expériences in vitro ont été utilisées pour mesurer les contraintes mécaniques induites dans la couche cornée après application d'un produit nettoyant et d'un produit hydratant; et des simulations in silico ont servi à illustrer comment les contraintes mécaniques mesurées dans la couche cornée entraînent le développement de souches à la profondeur des mécanorécepteurs cutanés, qui déclenchent les réponses perceptives de tiraillement. RÉSULTATS: Avant toute application de crème, les femmes sujettes au tiraillement tendent à avoir une couche cornée plus rigide que leurs homologues moins sensibles, mais l'application d'un produit nettoyant augmente la raideur de la couche cornée chez toutes les femmes. Étonnamment, aucune corrélation n'a été observée entre la perception de tiraillement et les mesures d'hydratation réalisées par le cornéomètre ou la fonction barrière, évaluée par la perte d'eau transépidermique. Les scores de tiraillement et de sécheresse auto-déclarés étaient fortement corrélés à une peau décrite par les sujets elles-mêmes comme sensible. Après application de la formule hydratante optimisée, Osmoskin®, qui contient des cires naturelles ayant de bonnes propriétés de dépôt de film, les consommateurs rapportent une forte diminution de la sensation de tiraillement et de sécheresse. Ces résultats concordent avec les expériences en laboratoire où le produit nettoyant s'est avéré augmenter les contraintes de séchage de la couche cornée de 34 %, tandis que l'application ultérieure d'Osmoskin® a réduit les contraintes de 48 %. La modélisation à éléments finis, en utilisant les résultats expérimentaux comme données, élucide les différences de perception entre les deux groupes de femmes. Il est clair qu'Osmoskin® modifie l'état mécanique de la couche cornée, et produit des souches dans l'épiderme sous-jacent qui activent plusieurs mécano-récepteurs cutanés à un niveau corrélé au confort perçu par la patiente.La combinaison des approches in vivo, in vitro et in silico fournit un nouveau cadre pour comprendre pleinement comment les sensations de tiraillement de la peau se forment et se propagent, et comment elles peuvent être soulagées en mettant au point une crème hydratante optimisée.

Intrinsically stretchable bioelectronic devices based on soft and conducting organic materials have been regarded as the ideal interface for seamless and biocompatible integration with the human body. However, the grand challenge remains for the conducting polymer to possess both high mechanical ductility and good electrical conduction at cellular level feature sizes. This longstanding material limitation in organic bioelectronics has impeded the full exploitation of its unique benefits. Here, we introduce a new molecular engineering strategy based on rationally designed topological supramolecular networks, which allows effective decoupling of competing effects from multiple molecular building blocks to meet complex requirements. We achieve two orders of magnitude improvement in the conductivity under 100% strain in physiological environment, along with the capability for direct photopatterning down to 2 μm. These unprecedented capabilities allow us to realize previously inaccessible bioelectronic applications including high-resolution monitoring of ‘soft and malleable’ creatures, e.g., octopus, and localized neuromodulation down to single nucleus precision for controlling organ-specific activities through delicate tissues, e.g., brainstem.

In this paper, a novel fracture mechanics test-setup was developed, implemented and applied for assessment of the fatigue delamination behavior of glass/encapsulant laminates under superimposed mechanical stresses and environmental influences. Double cantilever beam (DCB) specimens with glass substrates were prepared using ethylene vinyl-acetate copolymer (EVA) or polyolefin elastomer (POE) encapsulants. Displacement-controlled fatigue tests were conducted at 80 °C under dry (5% rh) and humid (80% rh) conditions. The damage zone ahead of the delamination crack tip was monitored with a topside mounted camera system. A superior delamination resistance of POE based double glass laminates was ascertained. Under less service-relevant, hot-dry conditions, the glass laminates exhibited a mm-sized damage process zone ahead of the crack tip, in which void nucleation and fibril formation took place. While the POE laminate failed also in a cohesive manner within the encapsulant at 80 °C and 80% rh (i.e., hot-humid), the crack was propagating in the glass/EVA laminate close to the interface in a brittle manner. Local ageing mechanisms were confirmed for the fractured EVA laminates by XPS. The superposition of mechanical and thermal stresses along with humidity resulted in sodium ion migration presumably promoting deacetylation of EVA. Interestingly, the analyzed degradation products were in good agreement with data obtained for damp heat aged glass/foil PV modules characterized subsequently by monotonic delamination testing. The main advantage of the novel environmental fracture mechanics methodology is the high acceleration factor (50 to 100x faster) compared to conventional ageing and delamination testing of PV modules. Version of record

Low and Ultra-k dielectric organosilicate glasses (OSG) are widely used in device interconnect applications such as shallow trench isolation as insulating units. However, the process of gap filling between conducting units has been challenging. One of the challenges is related to the undesired formation of nanovoids in the low-k dielectric material confined inside the trench geometry. Importantly, the effects of such nanoscale device constraints on the structure and mechanical reliability of low-k dielectric hybrid materials are not very well understood. To close this lack of understanding and guide the related experimental efforts we performed molecular dynamics simulations where we explore the role of the molecular structure and connectivity of different low-k dielectric OSG precursors under nanoscale confinement, and predict the resulting elastic and fracture properties. We demonstrated that hyperconnected OSG precursors with aromatic rings, such as the 1,3,5-benzene molecule, pack more homogenously under confinement leading to smaller nanovoids and better mechanical reliability compared to conventionally bridged OSG precursors, such as the ethylene bridged Et-OCS molecule.