Search

Bladder cancer (BCa) poses a significant health challenge, particularly affecting men with higher incidence and mortality rates. Addressing the need for improved predictive models in BCa treatment, this study introduces an innovative 3D in vitro patient-derived bladder cancer tumor model, utilizing decellularized pig bladders as scaffolds. Traditional 2D cell cultures, insufficient in replicating tumor microenvironments, have driven the development of sophisticated 3D models. The study successfully achieved pig bladder decellularization through multiple cycles of immersion in salt solutions, resulting in notable macroscopic and histological changes. This process confirmed the removal of cellular components while preserving the native extracellular matrix (ECM). Quantitative analysis demonstrated the efficacy of decellularization, with a remarkable reduction in DNA concentration, signifying the removal of over 95% of cellular material. In the development of the in vitro bladder cancer model, muscle invasive bladder cancer patients' cells were cultured within decellularized pig bladders, yielding a three-dimensional cancer model. Optimal results were attained using an air–liquid interface technique, with cells injected directly into the scaffold at three distinct time points. Histological evaluations showcased characteristics resembling in vivo tumors derived from bladder cancer patients' cells. To demonstrate the 3D cancer model's effectiveness as a drug screening platform, the study treated it with Cisplatin (Cis), Gemcitabine (Gem), and a combination of both drugs. Comprehensive cell viability assays and histological analyses illustrated changes in cell survival and proliferation. The model exhibited promising correlations with clinical outcomes, boasting an 83.3% reliability rate in predicting treatment responses. Comparison with traditional 2D cultures and spheroids underscored the 3D model's superiority in reliability, with an 83.3% predictive capacity compared to 50% for spheroids and 33.3% for 2D culture. Acknowledging limitations, such as the absence of immune and stromal components, the study suggests avenues for future improvements. In conclusion, this innovative 3D bladder cancer model, combining decellularization and patient-derived cells, marks a significant advancement in preclinical drug testing. Its potential for predicting treatment outcomes and capturing patient-specific responses opens new avenues for personalized medicine in bladder cancer therapeutics. Future refinements and validations with larger patient cohorts hold promise for revolutionizing BCa research and treatment strategies. [ABSTRACT FROM AUTHOR]

Abstract Bladder cancer (BCa) poses a significant health challenge, particularly affecting men with higher incidence and mortality rates. Addressing the need for improved predictive models in BCa treatment, this study introduces an innovative 3D in vitro patient-derived bladder cancer tumor model, utilizing decellularized pig bladders as scaffolds. Traditional 2D cell cultures, insufficient in replicating tumor microenvironments, have driven the development of sophisticated 3D models. The study successfully achieved pig bladder decellularization through multiple cycles of immersion in salt solutions, resulting in notable macroscopic and histological changes. This process confirmed the removal of cellular components while preserving the native extracellular matrix (ECM). Quantitative analysis demonstrated the efficacy of decellularization, with a remarkable reduction in DNA concentration, signifying the removal of over 95% of cellular material. In the development of the in vitro bladder cancer model, muscle invasive bladder cancer patients’ cells were cultured within decellularized pig bladders, yielding a three-dimensional cancer model. Optimal results were attained using an air–liquid interface technique, with cells injected directly into the scaffold at three distinct time points. Histological evaluations showcased characteristics resembling in vivo tumors derived from bladder cancer patients’ cells. To demonstrate the 3D cancer model’s effectiveness as a drug screening platform, the study treated it with Cisplatin (Cis), Gemcitabine (Gem), and a combination of both drugs. Comprehensive cell viability assays and histological analyses illustrated changes in cell survival and proliferation. The model exhibited promising correlations with clinical outcomes, boasting an 83.3% reliability rate in predicting treatment responses. Comparison with traditional 2D cultures and spheroids underscored the 3D model’s superiority in reliability, with an 83.3% predictive capacity compared to 50% for spheroids and 33.3% for 2D culture. Acknowledging limitations, such as the absence of immune and stromal components, the study suggests avenues for future improvements. In conclusion, this innovative 3D bladder cancer model, combining decellularization and patient-derived cells, marks a significant advancement in preclinical drug testing. Its potential for predicting treatment outcomes and capturing patient-specific responses opens new avenues for personalized medicine in bladder cancer therapeutics. Future refinements and validations with larger patient cohorts hold promise for revolutionizing BCa research and treatment strategies.

Liver transplantation represents the only definitive treatment for patients with end-stage liver disease. However, the shortage of liver donors provokes a dramatic gap between available grafts and patients on the waiting list. Whole liver bioengineering, an emerging field of tissue engineering, holds great potential to overcome this gap. This approach involves two main steps; the first is liver decellularization and the second is recellularization. Liver decellularization aims to remove cellular and nuclear materials from the organ, leaving behind extracellular matrices containing different structural proteins and growth factors while retaining both the vascular and biliary networks. Recellularization involves repopulating the decellularized liver with appropriate cells, theoretically from the recipient patient, to reconstruct the parenchyma, vascular tree, and biliary network. The aim of this review is to identify the major advances in decellularization and recellularization strategies and investigate obstacles for the clinical application of bioengineered liver, including immunogenicity of the designed liver extracellular matrices, the need for standardization of scaffold fabrication techniques, selection of suitable cell sources for parenchymal repopulation, vascular, and biliary tree reconstruction. In vivo transplantation models are also summarized for evaluating the functionality of bioengineered livers. Finally, the regulatory measures and future directions for confirming the safety and efficacy of bioengineered liver are also discussed. Addressing these challenges in whole liver bioengineering may offer new solutions to meet the demand for liver transplantation and improve patient outcomes.

The recellularization of tissues after decellularization is a relatively new technology in the field of tissue engineering (TE). Decellularization involves removing cells from a tissue or organ, leaving only the extracellular matrix (ECM). This can then be recellularized with new cells to create functional tissues or organs. The first significant mention of recellularization in decellularized tissues can be traced to research conducted in the early 2000s. One of the landmark studies in this field was published in 2008 by Ott, where researchers demonstrated the recellularization of a decellularized rat heart with cardiac cells, resulting in a functional organ capable of contraction. Since then, other important studies have been published. These studies paved the way for the widespread application of recellularization in TE, demonstrating the potential of decellularized ECM to serve as a scaffold for regenerating functional tissues. Thus, although the concept of recellularization was initially explored in previous decades, these studies from the 2000s marked a major turning point in the development and practical application of the technology for the recellularization of decellularized tissues. The article reviews the historical advances and limitations in organ recellularization in TE over the last two decades.

Duodenal mucosa ablation (DMA) is a novel approach to treat diabetes, consisting of endoscopic ablation of dysfunctional diabetic duodenal mucosa, which, following the healing response, is replaced by normally functioning mucosa. Two techniques, duodenal mucosal resurfacing (DMR) and recellularization via electroporation therapy (ReCET), recently showed promise in type 2 diabetes mellitus (T2DM) patients. [ABSTRACT FROM AUTHOR]

Background: Osteochondral regeneration has long been recognized as a complex and challenging project in the field of tissue engineering. In particular, reconstructing the osteochondral interface is crucial for determining the effectiveness of the repair. Although several artificial layered or gradient scaffolds have been developed recently to simulate the natural interface, the functions of this unique structure have still not been fully replicated. In this paper, we utilized laser micro-patterning technology (LMPT) to modify the natural osteochondral “plugs” for use as grafts and aimed to directly apply the functional interface unit to repair osteochondral defects in a goat model. Methods: For in vitro evaluations, the optimal combination of LMPT parameters was confirmed through mechanical testing, finite element analysis, and comparing decellularization efficiency. The structural and biological properties of the laser micro-patterned osteochondral implants (LMP-OI) were verified by measuring the permeability of the interface and assessing the recellularization processes. In the goat model for osteochondral regeneration, a conical frustum-shaped defect was specifically created in the weight-bearing area of femoral condyles using a customized trephine with a variable diameter. This unreported defect shape enabled the implant to properly self-fix as expected. Results: The micro-patterning with the suitable pore density and morphology increased the permeability of the LMP-OIs, accelerated decellularization, maintained mechanical stability, and provided two relative independent microenvironments for subsequent recellularization. The LMP-OIs with goat's autologous bone marrow stromal cells in the cartilage layer have securely integrated into the osteochondral defects. At 6 and 12 months after implantation, both imaging and histological assessments showed a significant improvement in the healing of the cartilage and subchondral bone. Conclusion: With the natural interface unit and zonal recellularization, the LMP-OI is an ideal scaffold to repair osteochondral defects especially in large animals. The translational potential of this article: These findings suggest that such a modified xenogeneic osteochondral implant could potentially be explored in clinical translation for treatment of osteochondral injuries. Furthermore, trimming a conical frustum shape to the defect region, especially for large-sized defects, may be an effective way to achieve self-fixing for the implant.

Objectives: Tissue engineering approaches via repopulation of acellular biological grafts provide an exciting opportunity to generate lung grafts for transplantation. Alveolar type 2 (AT2) cells are a promising cell source for re-epithelialization. There are however inherent limitations with respect to their survival and growth, thus impeding their usability for tissue engineering applications. This study investigates the use of mesenchymal stromal cells to support primary AT2 cells for recellularization of mouse lung scaffolds. Methods: AT2 cells and bone marrow-derived mesenchymal cells (BMC) were co-delivered to decellularized mouse lung scaffolds. Recellularized lungs were evaluated for cell surface coverage, viability, and differentiation at 1 and 4 days after cell seeding. Recellularization was evaluated via histological analysis and immunofluorescence. Results: Simultaneous delivery of AT2 and BMC into acellular lung scaffolds resulted in enhanced cell surface coverage and reduced AT2 cell apoptosis in the recellularized scaffolds at Day 1 but not Day 4. AT2 cell number decreased after 4 days in both of AT2 only and codelivery groups suggesting limited expansion potential in the scaffold. After retention in the scaffold, AT2 cells differentiated into Aqp5-expressing cells. Conclusions: Our results indicate that BMC support AT2 cell survival during the initial attachment and engraftment phase of recellularization. While our findings suggest only a short-term beneficial effect of BMC, our study demonstrates that AT2 cells can be delivered and retained in acellular lung scaffolds; thus with preconditioning and supporting cells, may be used for re-epithelialization. Selection and characterization of appropriate cell sources for use in recellularization, will be critical for ultimate clinical application.

Reconstructive techniques to repair severe tissue defects include the use of autologous fasciocutaneous flaps, which may be limited due to donor site availability or lead to complications such as donor site morbidity. A number of synthetic or natural dermal substitutes are in use clinically, but none have the architectural complexity needed to reconstruct deep tissue defects. The perfusion decellularization of fasciocutaneous flaps is an emerging technique that yields a scaffold with the necessary composition and vascular microarchitecture and serves as an alternative to autologous flaps. In this study, we show the perfusion decellularization of porcine fasciocutaneous flaps using sodium dodecyl sulfate (SDS) at three different concentrations, and identify that 0.2% SDS results in a decellularized flap that is efficiently cleared of its cellular material at 86%, has maintained its collagen and glycosaminoglycan content, and preserved its microvasculature architecture. We further demonstrate that the decellularized graft has the porous structure and growth factors that would facilitate repopulation with cells. Finally, we show the biocompatibility of the decellularized flap using human dermal fibroblasts, with cells migrating as deep as 150 µm into the tissue over a 7-day culture period. Overall, our results demonstrate the promise of decellularized porcine flaps as an interesting alternative for reconstructing complex soft tissue defects, circumventing the limitations of autologous skin flaps. [ABSTRACT FROM AUTHOR]

Introduction: The decellularization and recellularization is a promising approach for tissue engineering and regenerative medicine. However, the decellularization process depletes important components like glycosaminoglycans (GAGs), affecting cell attachment and causing immunogenicity. Studies have explored various surface modification strategies to enhance recellularization. Methods: To optimize the decellularization method, we employed whole kidney perfusion and slice kidney immersion/agitation techniques. The decellularized extracellular matrix (dECM) was then analyzed using hematoxylin and eosin (H&E) staining, scanning electron microscope (SEM), and DNA quantification. To enhance cell proliferation efficiency, albumin coating and rotating culture were applied. Also, we evaluated in vitro blood clot formation on the albumin-coated dECM by immersing it in blood. Results: After decellularization, the unique structures of the kidney were preserved whether cellular components were removed. Subsequently, we utilized albumin coating and rotating culture for recellularization, and observed that albumin-coated dECM not only promoted high cell proliferation rates but also prevented blood clot formation. Conclusion: The albumin-coated dECM promoted cell proliferation and reduced blood clot formation in vitro. Also, dynamic culture condition using rotating culture allowed for improved cellular penetration into the dECM, leading to a conductive environment for enhanced tissue infiltration. This new approach suggests that the combined utilization of albumin coating and rotating culture conditions can improve the efficiency of recellularization.

Chronic respiratory diseases often necessitate lung transplantation due to irreversible damage. Organ engineering offers hope through stem cell-based organ generation. However, the crucial sterilization step in scaffold preparation poses challenges. This study conducted a systematic review of studies that analysed the extracellular matrix (ECM) conditions of decellularised lungs subjected to different sterilisation processes. A search was performed for articles published in the PubMed, Web of Sciences, Scopus, and SciELO databases according to the PRISMA guidelines. Overall, five articles that presented positive results regarding the effectiveness of the sterilisation process were selected, some of which identified functional damage in the ECM. Was possible concluded that regardless of the type of agent used, physical or chemical, all of them demonstrated that sterilisation somehow harms the ECM. An ideal protocol has not been found to be fully effective in the sterilisation of pulmonary scaffolds for use in tissue and/or organ engineering.

The present study assessed the supportive roles of the decellularized human ovarian tissue in homing of mouse fetal ovarian cells into the scaffold as well as the formation of the follicular-like structure. The human ovarian cortical tissues were decellularized by three freeze-thaw cycles and then, treated with Triton X-100 for 15 h and 0.5% sodium dodecyl sulfate for 72 h. After isolation and preparation of mouse fetal ovarian cells (19 dpc) they were seeded into the decellularized scaffolds and cultured for 7 days, then using a light microscope, laser confocal scanning microscope, and scanning electron microscope these scaffolds were studied. Analysis of gene expression related to oocyte and follicular cells such as Ddx4, Nobox, Gdf9, and Connexin37 was assessed by real-time RT-PCR and the DDX4 and GDF9 proteins were detected by immunohistochemistry. The result showed that the human ovarian tissue was decellularized properly and the tissue elements and integrity were well preserved. After 7 days of in vitro culture, the fetal ovarian cells attached and penetrated into different sites and depths of the scaffold. The formed organoid within the scaffold showed large round, small polyhedral, and elongated spindle cells similar to the follicle structure. The molecular analysis and immunohistochemistry were confirmed an increase in the expression of genes and proteins related to oocyte and follicular cells in these reconstructed structures. In conclusion, the recellularization of human ovarian scaffolds by mouse fetal ovarian cells could support the follicular-like structure formation and it provides an in vitro model for follicle reconstitution and offers an alternative approach for clinical usage. [ABSTRACT FROM AUTHOR]

Allogeneic transplant organs are potentially highly immunogenic. The endothelial cells (ECs) located within the vascular system serve as the primary interface between the recipient's immune system and the donor organ, playing a key role in the alloimmune response. In this study, we investigated the potential use of recipient-derived ECs in a vein recellularization model. In this study, human iliac veins underwent complete decellularization using a Triton X-100 protocol. We demonstrated the feasibility of re-endothelializing acellular blood vessels using either human umbilical cord vein endothelial cell or human venous-derived ECs, with this re- endothelialization being sustainable for up to 28 days in vitro. The re-endothelialized veins exhibited the restoration of vascular barrier function, along with the restoration of innate immunoregulatory capabilities, evident through the facilitation of monocytic cell transmigration and their polarization toward a macrophage phenotype following transendothelial extravasation. Finally, we explored whether recellularization with EC of a different donor could prevent antibody-mediated rejection. We demonstrated that in chimeric vessels, allogeneic EC became a target of the humoral anti-donor response after activation of the classical immune complement pathway whereas autologous EC were spared, emphasizing their potential utility before transplantation. In conclusion, our study demonstrates that replacement of EC in transplants could reduce the immunological challenges associated with allogeneic grafts. [ABSTRACT FROM AUTHOR]

Decellularized scaffolds applied in tissue engineering offer improvements, supplying the elevated necessity for organs and tissues for replacement. However, obtaining a functional trachea for autotransplantation or allotransplantation is tricky due to the organ anatomical and structural complexity. Most tracheal decellularization protocols are lengthy, expensive, and could damage the tracheal extracellular matrix (ECM) architecture and functionality. Here, we aimed to evaluate the effectiveness of 3 different decellularization protocols combined with chemical and physical methods to obtain acellular canine tracheal scaffolds. Six adult dog tracheas were incised (tracheal segments) resulting in 28 rings for control tissue and 84 rings for decellularization (5–7 mm thick). Subsequently, decellularized tracheal scaffolds were microscopically/macroscopically characterized by histological analysis (Hematoxylin-Eosin, Masson's trichrome, Picrosirius red, Alcian blue, and Safranin O), immunohistochemistry for ECM components, scanning electron microscopy, and genomic DNA quantification. After decellularization, the tracheal tissue revealed reduced genomic DNA, and maintenance of ECM components preserved (structural proteins, adhesive glycoproteins, glycosaminoglycans and proteoglycans), suggesting ECM integrity and functionality. Comparatively, the combined ionic detergent with high vacuum pressure decellularization protocol revealed superior genomic DNA decrease (13.5 ng/mg) and improvement on glycosaminoglycans and proteoglycans preservation regarding the other decellularized trachea scaffolds and native tissue. Our results indicate that the 3 chemical/physical protocols reduce the decellularization time without ECM proteins damage. Notwithstanding, the use of ionic detergent under vacuum pressure was able to generate an innovative strategy to obtain acellular canine tracheal scaffolds with the highest levels of adhesive proteins that support its potentiality for recellularization and future tissue engineering application. [ABSTRACT FROM AUTHOR]

Chronic respiratory diseases often necessitate lung transplantation due to irreversible damage. Organ engineering offers hope through stem cell-based organ generation. However, the crucial sterilization step in scaffold preparation poses challenges. This study conducted a systematic review of studies that analysed the extracellular matrix (ECM) conditions of decellularised lungs subjected to different sterilisation processes. A search was performed for articles published in the PubMed, Web of Sciences, Scopus, and SciELO databases according to the PRISMA guidelines. Overall, five articles that presented positive results regarding the effectiveness of the sterilisation process were selected, some of which identified functional damage in the ECM. Was possible concluded that regardless of the type of agent used, physical or chemical, all of them demonstrated that sterilisation somehow harms the ECM. An ideal protocol has not been found to be fully effective in the sterilisation of pulmonary scaffolds for use in tissue and/or organ engineering.

Introduction: Nipple–areolar complex (NAC) reconstruction after breast cancer surgery is challenging and does not always provide optimal long-term esthetic results. Therefore, generating a NAC using tissue engineering techniques, such as a decellularization–recellularization process, is an alternative option to recreate a specific 3D NAC morphological unit, which is then covered with an in vitro regenerated epidermis and, thereafter, skin-grafted on the reconstructed breast.Materials and methods: Human NACs were harvested from cadaveric donors and decellularized using sequential detergent baths. Cellular clearance and extracellular matrix (ECM) preservation were analyzed by histology, as well as by DNA, ECM proteins, growth factors, and residual sodium dodecyl sulfate (SDS) quantification. In vivo biocompatibility was evaluated 30 days after the subcutaneous implantation of native and decellularized human NACs in rats. In vitro scaffold cytocompatibility was assessed by static seeding of human fibroblasts on their hypodermal side for 7 days, while human keratinocytes were seeded on the scaffold epidermal side for 10 days by using the reconstructed human epidermis (RHE) technique to investigate the regeneration of a new epidermis.Results: The decellularized NAC showed a preserved 3D morphology and appeared white. After decellularization, a DNA reduction of 98.3% and the absence of nuclear and HLA staining in histological sections confirmed complete cellular clearance. The ECM architecture and main ECM proteins were preserved, associated with the detection and decrease in growth factors, while a very low amount of residual SDS was detected after decellularization. The decellularized scaffolds were in vivo biocompatible, fully revascularized, and did not induce the production of rat anti-human antibodies after 30 days of subcutaneous implantation. Scaffold in vitro cytocompatibility was confirmed by the increasing proliferation of seeded human fibroblasts during 7 days of culture, associated with a high number of living cells and a similar viability compared to the control cells after 7 days of static culture. Moreover, the RHE technique allowed us to recreate a keratinized pluristratified epithelium after 10 days of culture.Conclusion: Tissue engineering allowed us to create an acellular and biocompatible NAC with a preserved morphology, microarchitecture, and matrix proteins while maintaining their cell growth potential and ability to regenerate the skin epidermis. Thus, tissue engineering could provide a novel alternative to personalized and natural NAC reconstruction.

The liver is the main organ responsible for drug metabolism; hepatocyte-based culture models play a fundamental role in understanding liver physiology. While different types of two-dimensional and three-dimensional liver models have been developed, the failure to accurately mimic native liver, including extracellular matrix (ECM) composition, complex structure, and rich vascular network as well as shortage of liver donors, impede their clinical translation. Herein, we have realized a “miniature human liver” based on the infusion of primary human hepatocytes into a decellularized liver template (DC-liver) made from the right liver lobe of mouse. We performed detergent-based decellularization of the mouse liver sections via portal vein (PV) perfusion and confirmed the successful removal of cell content, and the preservation of the vascular network. Subsequently, the DC-liver templates were recellularized at varying cell densities, including 3 × 106 and 1 × 107 cells/mL, and liver specific gene expression was assessed. Overall, hepatocytes in the recellularized liver constructs (RC-liver) expressed liver-specific mRNA expression markers (Hnf4α, Alb) at a level comparable to the unseeded, freshly isolated hepatocytes and to hepatocytes seeded inside collagen gels. However, the RC-liver with the highest cell density exhibited poor cell distribution and blockage of the PV, in general, hepatocytes showed elevated levels of Cyp1a1. Further analysis hinted at hypoxic conditions inside the constructs, showing higher mRNA expression levels of hypoxia-related genes (Hif-1α, Casp3, Zo-1). Fortunately, oxygen supplementation appeared to alleviate hypoxia, which markedly reduced expression levels of Hif-1α and Cyp1α1. As a proof-of-concept, primary human hepatocytes were also seeded into the DC-liver templates, and we could confirm liver specific mRNA expression (HNF4A, ALB, CYP3A4). Altogether, the above results indicate a profound potential in the use of DC-liver tissue for the fabrication of a miniature human liver, which may have potential application prospects for regenerative medicine, tissue engineering (TE) and other related disciplines.

Corneal opacity is a leading cause of vision impairment and suffering worldwide. Transplantation can effectively restore vision and reduce chronic discomfort. However, there is a considerable shortage of viable corneal graft tissues. Tissue engineering may address this issue by advancing xeno-keratoplasty as a viable alternative to conventional keratoplasty. In particular, livestock decellularization strategies offer the potential to generate bioartificial ocular prosthetics in sufficient supply to match existing and projected needs. To this end, we have examined the best practices and characterizations that have supported the current state-of-the-art driving preclinical and clinical applications. Identifying the challenges that delimit activities to supplement the donor corneal pool derived from acellular scaffolds allowed us to hypothesize a model for keratoprosthesis applications derived from livestock combining 3D printing and decellularization. [ABSTRACT FROM AUTHOR]

Acute Liver Failure (ALF) is a life-threatening illness characterized by the rapid onset of abnormal liver biochemistries, coagulopathy, and the development of hepatic encephalopathy. Extracorporeal bioengineered liver (BEL) grafts could offer a bridge therapy to transplant or recovery. The present study describes the manufacture of clinical scale BELs created from decellularized porcine-derived liver extracellular matrix seeded entirely with human cells: human umbilical vein endothelial cells (HUVECs) and primary human liver cells (PHLCs). Decellularized scaffolds seeded entirely with human cells were shown to adhere to stringent sterility and safety guidelines and demonstrated increased functionality when compared to grafts seeded with primary porcine liver cells (PPLCs). BELs with PHLCs were able to clear more ammonia than PPLCs and demonstrated lower perfusion pressures during patency testing. Additionally, to determine the full therapeutic potential of BELs seeded with PHLCs, longer culture periods were assessed to address the logistical constraints associated with manufacturing and transporting a product to a patient. The fully humanized BELs were able to retain their function after cold storage simulating a product transport period. Therefore, this study demonstrates the manufacture of bioengineered liver grafts and their potential in the clinical setting as a treatment for ALF. [ABSTRACT FROM AUTHOR]

Biomaterial templates play a critical role in establishing and bioinstructing three-dimensional cellular growth, proliferation and spatial morphogenetic processes that culminate in the development of physiologically relevant in vitro liver models. Various natural and synthetic polymeric biomaterials are currently available to construct biomimetic cell culture environments to investigate hepatic cell–matrix interactions, drug response assessment, toxicity, and disease mechanisms. One specific class of natural biomaterials consists of the decellularized liver extracellular matrix (dECM) derived from xenogeneic or allogeneic sources, which is rich in bioconstituents essential for the ultrastructural stability, function, repair, and regeneration of tissues/organs. Considering the significance of the key design blueprints of organ-specific acellular substrates for physiologically active graft reconstruction, herein we showcased the latest updates in the field of liver decellularization–recellularization technologies. Overall, this review highlights the potential of acellular matrix as a promising biomaterial in light of recent advances in the preparation of liver-specific whole organ scaffolds. The review concludes with a discussion of the challenges and future prospects of liver-specific decellularized materials in the direction of translational research. [ABSTRACT FROM AUTHOR]

Introduction: The need for liver transplantation is rising due to increase in end-stage liver diseases. Testing drug toxicity on either liver tissue or on adult hepatocytes is crucial as it is the major drug metabolizing organ. Aim of the Work: This study aimed to form natural liver scaffold by decellularization followed by recellularization using adult male albino rat hepatocytes to form auxiliary hepatic tissue, and to culture adult hepatocytes for experimental studies and liver bioengineering. Material and Methods: Group I: [10 rats] control group. Group II: [10 rats] liver decellularization group. Group III: [20 rats] 10 rats used as adult hepatocyte donor for recellularization, and some hepatocytes were cultivated in culture flasks to ensure proliferation, while another 10 rats’ livers were decellularized followed by liver recellularization. At the end of the experiment, livers of control, decellularized scaffold, and recellularized tissue were processed for histological, histochemical and immunohistochemical techniques. Morphometrical and statistical studies were also performed. Results: Grossly, decellularized livers appeared semi-transparent. Histologically they appeared as an acellular liver matrix with apparently preserved hepatic architecture. The cultivated hepatocytes in culture flasks showed progressively increased number till confluency at day 21. They appeared polygonal with granular cytoplasm when cocultured with other cells. Recellularized livers showed hepatocyte aggregations with satisfactory preservation of extracellular matrix. Reseeded hepatocytes appeared polygonal with acidophilic, granular and Periodic acid-Schiff positive cytoplasm. Also, they showed significant increase in mean number of cells exhibiting positive reaction for proliferating cell nuclear antigen and Alpha-fetoprotein immune-stained sections compared to control. Conclusion: Cultivated adult rat hepatocytes proliferated till confluency in culture flasks. Well-structured decellularized tissue was formed that supported hepatocyte survival and proliferation, thus, this recellularized liver model and the cultured hepatocytes can be used for pharmaceutical testing on liver models and could be a new hope for patients with liver diseases. [ABSTRACT FROM AUTHOR]

Abstract Background Scaffolds for tissue engineering can be received by whole organ decellularization while maintaining the site-specific extracellular matrix and the vascular tree. One among other decellularization techniques is the perfusion-based method using specific agents e.g. SDS for the elimination of cellular components. While SDS can disrupt the composition of the extracellular matrix and impair the adherence and growth of site-specific cells there are indications that xenogeneic cell types may benefit from protein denaturation by using higher detergent concentrations. The aim of this work is to investigate the effect of two different SDS-concentrations (i.e. 0.66% and 3%) on the ability of human endothelial cells to adhere and proliferate in an acellular rat kidney scaffold. Material and methods Acellular rat kidney scaffold was obtained by perfusion-based decellularization through the renal artery using a standardized protocol including SDS at concentrations of 0.66% or 3%. Subsequently cell seeding was performed with human immortalized endothelial cells EA.hy 926 via the renal artery. Recellularized kidneys were harvested after five days of pressure-controlled dynamic culture followed sectioning, histochemical and immunohistochemical staining as well as semiquantitative analysis. Results Efficacy of decellularization was verified by absence of cellular components as well as preservation of ultrastructure and adhesive proteins of the extracellular matrix. In semiquantitative analysis of recellularization, cell count after five days of dynamic culture more than doubled when using the gentle decellularization protocol with a concentration of SDS at 0.66% compared to 3%. Detectable cells maintained their endothelial phenotype and presented proliferative behavior while only a negligible fraction underwent apoptosis. Conclusion Recellularization of acellular kidney scaffold with endothelial cells EA.hy 926 seeded through the renal artery benefits from gentle decellularization procedure. Because of that, decellularization with a SDS concentration at 0.66% should be preferred in further studies and coculture experiments.

Reconstructive techniques to repair severe tissue defects include the use of autologous fasciocutaneous flaps, which may be limited due to donor site availability or lead to complications such as donor site morbidity. A number of synthetic or natural dermal substitutes are in use clinically, but none have the architectural complexity needed to reconstruct deep tissue defects. The perfusion decellularization of fasciocutaneous flaps is an emerging technique that yields a scaffold with the necessary composition and vascular microarchitecture and serves as an alternative to autologous flaps. In this study, we show the perfusion decellularization of porcine fasciocutaneous flaps using sodium dodecyl sulfate (SDS) at three different concentrations, and identify that 0.2% SDS results in a decellularized flap that is efficiently cleared of its cellular material at 86%, has maintained its collagen and glycosaminoglycan content, and preserved its microvasculature architecture. We further demonstrate that the decellularized graft has the porous structure and growth factors that would facilitate repopulation with cells. Finally, we show the biocompatibility of the decellularized flap using human dermal fibroblasts, with cells migrating as deep as 150 µm into the tissue over a 7-day culture period. Overall, our results demonstrate the promise of decellularized porcine flaps as an interesting alternative for reconstructing complex soft tissue defects, circumventing the limitations of autologous skin flaps.

To ensure the functional properties of an organ generated by the process of decellularization and recellularization, the initial density and distribution of seeding cells in the parenchymal space should be maximized. However, achieving a uniform distribution of cells across the entire organ is not straightforward because of vessel occlusion. This study assessed vessel occlusion during recellularization under different conditions. A combination of the electrical analog permeability (EPA) model, computational fluid dynamics (CFD), and discrete element method (DEM) was employed to describe the vessel occlusion phenomenon. In particular, realistic flow distributions in vascular trees of the decellularized organ were indicated by the EPA model. The cell suspension flow was modeled by a coupled CFD-DEM model, whereby living cells were presented as a discrete phase (solved by the DEM solver), and the culture medium was modeled as the fluid phase (solved by CFD solver). The cell suspension velocity was reduced up to 47% after decellularization, which directly affected cell movement. Simulation results also indicate that the occurrence of vessel occlusion was promoted by gravity direction in the asymmetric bifurcation and increased as the cell concentration increased. The assessment of vessel occlusion under different conditions was quantitatively investigated. The model provides insights into the dynamics of cells in the vessel compartment, allowing for the selection of optimum seeding parameters for the recellularization process. [ABSTRACT FROM AUTHOR]

Patients with cardiovascular disease often need replacement or bypass of a diseased blood vessel. With disadvantages of both autologous blood vessels and synthetic grafts, tissue engineering is emerging as a promising alternative of advanced therapy medicinal products for individualized blood vessels. By reconditioning of a decellularized blood vessel with the recipient’s own peripheral blood, we have been able to prevent rejection without using immunosuppressants and prime grafts for efficient recellularization in vivo. Recently, decellularized veins reconditioned with autologous peripheral blood were shown to be safe and functional in a porcine in vivo study as a potential alternative for vein grafting. In this study, personalized tissue engineered arteries (P-TEA) were developed using the same methodology and evaluated for safety in a sheep in vivo model of carotid artery transplantation. Five personalized arteries were transplanted to carotid arteries and analyzed for safety and patency as well as with histology after four months in vivo. All grafts were fully patent without any occlusion or stenosis. The tissue was well cellularized with a continuous endothelial cell layer covering the luminal surface, revascularized adventitia with capillaries and no sign of rejection or infection. In summary, the results indicate that P-TEA is safe to use and has potential as clinical grafts.

Abstract Objective: Recently, the decellularization technique is introduced as one of the tissue engineering procedures for the treatment of various deficiencies. Here, we aimed to assess the dynamic activity of CCs and HUVECs within decellularized bovine ovarian tissue transplanted subcutaneously in rats. Ovarian tissue was decellularized using a cocktail consisting of different chemicals, and the efficiency of decellularization was assessed using hematoxylin-eosin and DAPI staining. The cell survival was evaluated using an LDH leakage assay. Thereafter, decellularized samples were recellularized using HUVECs and CCs, encapsulated inside alginate (1.2%)-gelatin, (1%) hydrogel, and transplanted subcutaneously to rats. The existence of CD31- and estrogen-positive cells was assessed using immunohistochemistry staining. Results: Bright-field imaging and DAPI staining revealed the lack of nuclei with naive matrix structure in ovarian tissue subjected to decellularization protocol. SEM imaging revealed a normal matrix in decellularized ovaries. LDH assay showed a lack of cytotoxicity for CCs after 7-days compared to the control group. Immunohistochemistry staining showed both CD31- and estrogen-positive cells in CCs + HUVECs compared to the CCs group. CD31 cells appeared with flattened morphology aligned with matrix fibers. The existence of estrogen and CD31 positive cells showed the efficiency of decellularized ovarian tissue to restore cellular function and activity.

AimsTo test the hypothesis that reseeded anterior cruciate ligament (ACL)-derived cells have a better ability to survive and integrate into tendon extracellular matrix (ECM) and accelerate the ligamentization process, compared to adipose-derived mesenchymal stem cells (ADMSCs).MethodsAcellularized tibialis allograft tendons were used. Tendons were randomly reseeded with ACL-derived cells or ADMSCs. ACL-derived cells were harvested and isolated from remnants of ruptured ACLs during reconstruction surgery and cultured at passage three. Cell suspensions (200 µl) containing 2 × 106 ACL-derived cells or ADMSCs were prepared for the purpose of reseeding. At days 1, 3, and 7 post-reseeding, graft composites were assessed for repopulation with histological and immunohistochemical analysis. Matrix protein contents and gene expression levels were analyzed.ResultsIn the graft reseeded with ACL-derived cells, a large number of elongated cells that integrated into the matrix were evident at day 3 and day 7. However, in the graft reseeded with ADMSCs, only a small number of elongated cells were found integrated into the matrix. Immunofluorescence for Ki-67 and type I collagen confirmed the pronounced production of type I collagen by Ki-67-positive ACL-derived cells integrated into the ECM. A messenger RNA (mRNA) expression assay demonstrated significantly higher gene expression levels of types I (p = 0.013) and III (p = 0.050) collagen in the composites reseeded with ACL-derived cells than ADMSCs.ConclusionACL-derived cells, when reseeded to acellularized tendon graft, demonstrated earlier better survival and integration in the tendon ECM and resulted in higher gene expression levels of collagen, which may be essential to the normal ligamentization process compared to ADMSCs.Cite this article: Bone Joint Res 2022;11(11):777–786.

Abstract Background Tissue engineering of native vessels is an alternative approach for patients with vascular disease who lack sufficient saphenous vein or other suitable conduits for autologous vascular graft. Moreover, the harvest of vessels prolongs the surgical procedure and it may lead to the morbidity of donor site in elder patients: therefore, it seems that the use of tissue-engineered vessels would be an attractive and less invasive substitute for autologous vascular grafts. Apelin-13 plays a pivotal role in cell proliferation, survival, and attachment; therefore, covalent attachment of apelin-13 to the acellular scaffolds might be a favorable approach for improving recellularization efficacy. Methods In the present study, the decellularization process was performed using various detergents. Afterward, the efficacy of decellularization procedure was evaluated using multiple approaches including assessment of DNA, hydroxyproline, and GAG content as well as Masson’s trichrome and orcein staining used for collagen and elastin determination. Subsequently, the scaffold was bioconjugated with apelin-13 using the EDC-NHS linker and acellular scaffolds were recellularized using fibroblasts, endothelial cells, and smooth muscle cells. SEM images and characterization methods were also used to evaluate the effect of apelin-13 attachment to the acellular scaffold on tissue recellularization. We also developed a novel strategy to eliminate the remnant detergents from the scaffold and increase cell viability by incubating acellular scaffolds with Bio-Beads SM-2 resin. Testometric tensile testing machine was also used for the assessment of mechanical properties and uniaxial tensile strength of decellularized and recellularized vessels compared to that of native tissues. Results Our results proposed 16-h perfusion of 0.25% sodium dodecyl sulfate (SDS) + 0.5% Triton X-100 combination to the vessel as an optimal decellularization protocol in terms of cell elimination as well as extracellular matrix preservation. Furthermore, the results demonstrated considerable elevation of cell adhesion and proliferation in scaffolds bioconjugated with apelin-13. The immunohistochemical (IHC) staining of CD31, α-SMA, and vimentin markers suggested placement of seeded cells in the suitable sites and considerable elevation of cell attachment within the scaffolds bioconjugated with apelin-13 compared to the non-bioconjugated, and decellularized groups. Moreover, the quantitative analysis of IHC staining of CD31, α-SMA, and vimentin markers suggested considerable elevation in the number of endothelial, smooth muscle, and fibroblast cells in the recellularized scaffolds bioconjugated with apelin-13 group (1.4% ± 0.02, 6.66% ± 0.23, and 9.87% ± 0.13%, respectively) compared to the non-bioconjugated scaffolds (0.03% ± 0.01, 0.28% ± 0.01, and 1.2% ± 0.09%, respectively) and decellularized groups (0.03% ± 0.007, 0.05% ± 0.01, and 0.13% ±0.005%, respectively). Although the maximum strain to the rupture was reduced in tissues decellularized using 0.5% SDS and CHAPS compared to that of native ones (116% ± 6.79, 139.1% ± 3.24, and 164% ± 8.54%, respectively), ultimate stress was decreased in all decellularized and recellularized groups. Besides, our results indicated that cell viability on the 1st, 3rd, and 7th day was 100.79% ± 0.7, 100.34% ± 0.08, and 111.24% ± 1.7% for the decellularized rat aorta conjugated with apelin-13, which was incubated for 48-h with Bio-Beads SM-2, and 73.37% ± 7.99, 47.6% ± 11.69, and 27.3% ± 7.89% for decellularized rat aorta scaffolds conjugated with apelin-13 and washed 48-h by PBS, respectively. These findings reveal that the incubation of the scaffold with Bio-Beads SM-2 is a novel and promising approach for increasing cell viability and growth within the scaffold. Conclusions In conclusion, our results provide a platform in which xenograft vessels are decellularized properly in a short time, and the recellularization process is significantly improved after the bioconjugation of the acellular scaffold with apelin-13 in terms of cell adhesion and viability within the scaffold. Graphical Abstract

Background: Scaffolds for tissue engineering can be received by whole organ decellularization while maintaining the site-specific extracellular matrix and the vascular tree. One among other decellularization techniques is the perfusion-based method using specific agents e.g. SDS for the elimination of cellular components. While SDS can disrupt the composition of the extracellular matrix and impair the adherence and growth of site-specific cells there are indications that xenogeneic cell types may benefit from protein denaturation by using higher detergent concentrations. The aim of this work is to investigate the effect of two different SDS-concentrations (i.e. 0.66% and 3%) on the ability of human endothelial cells to adhere and proliferate in an acellular rat kidney scaffold. Material and methods: Acellular rat kidney scaffold was obtained by perfusion-based decellularization through the renal artery using a standardized protocol including SDS at concentrations of 0.66% or 3%. Subsequently cell seeding was performed with human immortalized endothelial cells EA.hy 926 via the renal artery. Recellularized kidneys were harvested after five days of pressure-controlled dynamic culture followed sectioning, histochemical and immunohistochemical staining as well as semiquantitative analysis. Results: Efficacy of decellularization was verified by absence of cellular components as well as preservation of ultrastructure and adhesive proteins of the extracellular matrix. In semiquantitative analysis of recellularization, cell count after five days of dynamic culture more than doubled when using the gentle decellularization protocol with a concentration of SDS at 0.66% compared to 3%. Detectable cells maintained their endothelial phenotype and presented proliferative behavior while only a negligible fraction underwent apoptosis. Conclusion: Recellularization of acellular kidney scaffold with endothelial cells EA.hy 926 seeded through the renal artery benefits from gentle decellularization procedure. Because of that, decellularization with a SDS concentration at 0.66% should be preferred in further studies and coculture experiments. [ABSTRACT FROM AUTHOR]

Introduction: Two-dimensional cell cultures have contributed substantially to lung cancer research, but 3D cultures are gaining attention as a new, more efficient, and effective research model. A model reproducing the 3D characteristics and tumor microenvironment of the lungs in vivo, including the co-existence of healthy alveolar cells with lung cancer cells, is ideal. Here, we describe the creation of a successful ex vivo lung cancer model based on bioengineered lungs formed by decellularization and recellularization.Methods: Human cancer cells were directly implanted into a bioengineered rat lung, which was created with a decellularized rat lung scaffold reseeded with epithelial cells, endothelial cells and adipose-derived stem cells. Four human lung cancer cell lines (A549, PC-9, H1299, and PC-6) were applied to demonstrate forming cancer nodules on recellularized lungs and histopathological assessment were made among these models. MUC-1 expression analysis, RNA-seq analysis and drug response test were performed to demonstrate the superiority of this cancer model.Results: The morphology and MUC-1 expression of the model were like those of lung cancer in vivo. RNA sequencing revealed an elevated expression of genes related to epithelial-mesenchymal transition, hypoxia, and TNF-α signaling via NF-κB; but suppression of cell cycle-related genes including E2F. Drug response assays showed that gefitinib suppressed PC-9 cell proliferation equally well in the 3D lung cancer model as in 2D culture dishes, albeit over a smaller volume of cells, suggesting that fluctuations in gefitinib resistance genes such as JUN may affect drug sensitivity.Conclusions: A novel ex vivo lung cancer model was closely reproduced the 3D structure and microenvironment of the actual lungs, highlighting its possible use as a platform for lung cancer research and pathophysiological studies.

Introduction: Despite progress in whole-organ decellularization and recellularization, maintaining long-term perfusion in vivo remains a hurdle to realizing clinical translation of bioengineered kidney grafts. The objectives for the present study were to define a threshold glucose consumption rate (GCR) that could be used to predict in vivo graft hemocompatibility and utilize this threshold to assess the in vivo performance of clinically relevant decellularized porcine kidney grafts recellularized with human umbilical vein endothelial cells (HUVECs).Materials and methods: Twenty-two porcine kidneys were decellularized and 19 were re-endothelialized using HUVECs. Functional revascularization of control decellularized (n = 3) and re-endothelialized porcine kidneys (n = 16) was tested using an ex vivo porcine blood flow model to define an appropriate metabolic glucose consumption rate (GCR) threshold above which would sustain patent blood flow. Re-endothelialized grafts (n = 9) were then transplanted into immunosuppressed pigs with perfusion measured using angiography post-implant and on days 3 and 7 with 3 native kidneys used as controls. Patent recellularized kidney grafts underwent histological analysis following explant.Results: The glucose consumption rate of recellularized kidney grafts reached a peak of 39.9 ± 9.7 mg/h at 21 ± 5 days, at which point the grafts were determined to have sufficient histological vascular coverage with endothelial cells. Based on these results, a minimum glucose consumption rate threshold of 20 mg/h was set. The revascularized kidneys had a mean perfusion percentage of 87.7% ± 10.3%, 80.9% ± 33.1%, and 68.5% ± 38.6% post-reperfusion on Days 0, 3 and 7, respectively. The 3 native kidneys had a mean post-perfusion percentage of 98.4% ± 1.6%. These results were not statistically significant.Conclusion: This study is the first to demonstrate that human-scale bioengineered porcine kidney grafts developed via perfusion decellularization and subsequent re-endothelialization using HUVEC can maintain patency with consistent blood flow for up to 7 days in vivo. These results lay the foundation for future research to produce human-scale recellularized kidney grafts for transplantation.

Diabetes mellitus is a global disease requiring long-term treatment and monitoring. At present, pancreas or islet transplantation is the only reliable treatment for achieving stable euglycemia in Type I diabetes patients. However, the shortage of viable pancreata for transplantation limits the use of this therapy for the majority of patients. Organ decellularization and recellularization is emerging as a promising solution to overcome the shortage of viable organs for transplantation by providing a potential alternative source of donor organs. Several studies on decellularization and recellularization of rodent, porcine, and human pancreata have been performed, and show promise for generating usable decellularized pancreas scaffolds for subsequent recellularization and transplantation. In this state-of-the-art review, we provide an overview of the latest advances in pancreas decellularization, recellularization, and revascularization. We also discuss clinical considerations such as potential transplantation sites, donor source, and immune considerations. We conclude with an outlook on the remaining work that needs to be done in order to realize the goal of using this technology to create bioengineered pancreata for transplantation in diabetes patients. Pancreas or islet transplantation is a means of providing insulin-independence in diabetes patients. However, due to the shortage of viable pancreata, whole-organ decellularization and recellularization is emerging as a promising solution to overcome organ shortage for transplantation. Several studies on decellularization and recellularization of rodent, porcine, and human pancreata have shown promise for generating usable decellularized pancreas scaffolds for subsequent recellularization and transplantation. In this state-of-the-art review, we highlight the latest advances in pancreas decellularization, recellularization, and revascularization. We also discuss clinical considerations such as potential transplantation sites, donor source, and immune considerations. We conclude with future work that needs to be done in order to realize clinical translation of bioengineered pancreata for transplantation in diabetes patients. [Display omitted] [ABSTRACT FROM AUTHOR]

The multidisciplinary fields of tissue engineering and regenerative medicine have the potential to revolutionize the practise of medicine through the abilities to repair, regenerate, or replace tissues and organs with functional engineered constructs. To this end, tissue engineering combines scaffolding materials with cells and biologically active molecules into constructs with the appropriate structures and properties for tissue/organ regeneration, where scaffolding materials and biomolecules are the keys to mimic the native extracellular matrix (ECM). For this, one emerging way is to decellularize the native ECM into the materials suitable for, directly or in combination with other materials, creating functional constructs. Over the past decade, decellularized ECM (or dECM) has greatly facilitated the advance of tissue engineering and regenerative medicine, while being challenged in many ways. This article reviews the recent development of dECM for tissue engineering and regenerative medicine, with a focus on the preparation of dECM along with its influence on cell culture, the modification of dECM for use as a scaffolding material, and the novel techniques and emerging trends in processing dECM into functional constructs. We highlight the success of dECM and constructs in the in vitro, in vivo, and clinical applications and further identify the key issues and challenges involved, along with a discussion of future research directions. [ABSTRACT FROM AUTHOR]

The application of scaffolding materials is believed to hold enormous potential for tissue regeneration. Despite the widespread application and rapid advance of several tissue-engineered scaffolds such as natural and synthetic polymer-based scaffolds, they have limited repair capacity due to the difficulties in overcoming the immunogenicity, simulating in-vivo microenvironment, and performing mechanical or biochemical properties similar to native organs/tissues. Fortunately, the emergence of decellularized extracellular matrix (dECM) scaffolds provides an attractive way to overcome these hurdles, which mimic an optimal non-immune environment with native three-dimensional structures and various bioactive components. The consequent cell-seeded construct based on dECM scaffolds, especially stem cell-recellularized construct, is considered an ideal choice for regenerating functional organs/tissues. Herein, we review recent developments in dECM scaffolds and put forward perspectives accordingly, with particular focus on the concept and fabrication of decellularized scaffolds, as well as the application of decellularized scaffolds and their combinations with stem cells (recellularized scaffolds) in tissue engineering, including skin, bone, nerve, heart, along with lung, liver and kidney.

Acute Liver Failure (ALF) is a life-threatening illness characterized by the rapid onset of abnormal liver biochemistries, coagulopathy, and the development of hepatic encephalopathy. Extracorporeal bioengineered liver (BEL) grafts could offer a bridge therapy to transplant or recovery. The present study describes the manufacture of clinical scale BELs created from decellularized porcine-derived liver extracellular matrix seeded entirely with human cells: human umbilical vein endothelial cells (HUVECs) and primary human liver cells (PHLCs). Decellularized scaffolds seeded entirely with human cells were shown to adhere to stringent sterility and safety guidelines and demonstrated increased functionality when compared to grafts seeded with primary porcine liver cells (PPLCs). BELs with PHLCs were able to clear more ammonia than PPLCs and demonstrated lower perfusion pressures during patency testing. Additionally, to determine the full therapeutic potential of BELs seeded with PHLCs, longer culture periods were assessed to address the logistical constraints associated with manufacturing and transporting a product to a patient. The fully humanized BELs were able to retain their function after cold storage simulating a product transport period. Therefore, this study demonstrates the manufacture of bioengineered liver grafts and their potential in the clinical setting as a treatment for ALF.

Biomaterial templates play a critical role in establishing and bioinstructing three-dimensional cellular growth, proliferation and spatial morphogenetic processes that culminate in the development of physiologically relevant in vitro liver models. Various natural and synthetic polymeric biomaterials are currently available to construct biomimetic cell culture environments to investigate hepatic cell–matrix interactions, drug response assessment, toxicity, and disease mechanisms. One specific class of natural biomaterials consists of the decellularized liver extracellular matrix (dECM) derived from xenogeneic or allogeneic sources, which is rich in bioconstituents essential for the ultrastructural stability, function, repair, and regeneration of tissues/organs. Considering the significance of the key design blueprints of organ-specific acellular substrates for physiologically active graft reconstruction, herein we showcased the latest updates in the field of liver decellularization–recellularization technologies. Overall, this review highlights the potential of acellular matrix as a promising biomaterial in light of recent advances in the preparation of liver-specific whole organ scaffolds. The review concludes with a discussion of the challenges and future prospects of liver-specific decellularized materials in the direction of translational research.

In recent era, many researches on implantable bio-artificial organs has been increased owing to large gap between donors and receivers. Comprehensive organ based researches on perfusion culture for cell injury using different flow rate have not been conducted at the cellular level. The present study investigated the co-culture of rat glomerulus endothelial cell (rGEC) and rat bone marrow mesenchymal stem cells (rBMSC) to develop micro vascularization in the kidney scaffolds culturing by bioreactor system. To obtain kidney scaffold, extracted rat kidneys were decellularized by 1% sodium dodecyl sulfate (SDS), 1% triton X-100, and distilled water. Expanded rGECs were injected through decellularized kidney scaffold artery and cultured using bioreactor system. Vascular endothelial cells adhered and proliferated on the renal ECM scaffold in the bioreactor system for 3, 7 and 14 days. Static, 1 ​ml/min and 2 ​ml/min flow rates (FR) were tested and among them, 1 ​ml/min flow rate was selected based on cell viability, glomerulus character, inflammation/endothelialization proteins expression level. However, the flow injury was still existed on primary cell cultured at vessel in kidney scaffold. Therefore, co-culture of rGEC ​+ ​rBMSC found suitable to possibly solve this problem and resulted increased cell proliferation and micro-vascularization in the glomerulus, reducing inflammation and cell death which induced by flow injury. The optimized perfusion rate under rGEC ​+ ​rBMSC co-culture conditions resulted in enhanced endocellularization to make ECM derived implantable renal scaffold and might be useful as a way of treatment of the acute renal failure.

Objective: Recently, the decellularization technique is introduced as one of the tissue engineering procedures for the treatment of various deficiencies. Here, we aimed to assess the dynamic activity of CCs and HUVECs within decellularized bovine ovarian tissue transplanted subcutaneously in rats. Ovarian tissue was decellularized using a cocktail consisting of different chemicals, and the efficiency of decellularization was assessed using hematoxylin-eosin and DAPI staining. The cell survival was evaluated using an LDH leakage assay. Thereafter, decellularized samples were recellularized using HUVECs and CCs, encapsulated inside alginate (1.2%)-gelatin, (1%) hydrogel, and transplanted subcutaneously to rats. The existence of CD31- and estrogen-positive cells was assessed using immunohistochemistry staining. Results: Bright-field imaging and DAPI staining revealed the lack of nuclei with naive matrix structure in ovarian tissue subjected to decellularization protocol. SEM imaging revealed a normal matrix in decellularized ovaries. LDH assay showed a lack of cytotoxicity for CCs after 7-days compared to the control group. Immunohistochemistry staining showed both CD31- and estrogen-positive cells in CCs + HUVECs compared to the CCs group. CD31 cells appeared with flattened morphology aligned with matrix fibers. The existence of estrogen and CD31 positive cells showed the efficiency of decellularized ovarian tissue to restore cellular function and activity. [ABSTRACT FROM AUTHOR]

Cardiovascular diseases are the leading cause of global mortality. Over the past two decades, researchers have tried to provide novel solutions for end-stage heart failure to address cardiac transplantation hurdles such as donor organ shortage, chronic rejection, and life-long immunosuppression. Cardiac decellularized extracellular matrix (dECM) has been widely explored as a promising approach in tissue-regenerative medicine because of its remarkable similarity to the original tissue. Optimized decellularization protocols combining physical, chemical, and enzymatic agents have been developed to obtain the perfect balance between cell removal, ECM composition, and function maintenance. However, proper assessment of decellularized tissue composition is still needed before clinical translation. Recellularizing the acellular scaffold with organ-specific cells and evaluating the extent of cardiomyocyte repopulation is also challenging. This review aims to discuss the existing literature on decellularized cardiac scaffolds, especially on the advantages and methods of preparation, pointing out areas for improvement. Finally, an overview of the state of research regarding the application of cardiac dECM and future challenges in bioengineering a human heart suitable for transplantation is provided. [ABSTRACT FROM AUTHOR]

Introduction: Current bioprosthetic heart valve replacement options are limited by structural valvular deterioration (SVD) due to an immune response to the xenogenic scaffold. Autologous mesenchymal stem cell (MSC) recellularization is a method of concealing xenogenic scaffolds, preventing recipient immune recognition of xenogenic tissue heart valves, and potentially leading to reduction in SVD incidence. The purpose of this study is to examine the effects of autologous MSC recellularized tissue on the immune response of human whole blood to bovine pericardium (BP). We hypothesized that autologous MSC recellularization of BP will result in reduced pro‐inflammatory cytokine production equivalent to autologous human pericardium. Methods: Bone marrow, human pericardium, and whole blood were collected from adult patients undergoing elective cardiac surgery. Decellularized BP underwent recellularization with autologous MSCs, followed by co‐incubation with autologous whole blood. Immunohistochemical, microscopic, and quantitative immune analysis approaches were used. Results: We demonstrated that native BP, exposed to human whole blood, results in significant TNF‐α and IL1β production. When decellularized BP is recellularized with autologous MSCs and exposed to whole blood, there is a significant reduction in TNF‐α and IL1β production. Importantly, recellularized BP exposed to whole blood had similar production of TNF‐α and IL1β when compared to autologous human pericardium exposed to human whole blood. Conclusion: Our results suggest that preventing initial immune activation with autologous MSC recellularization may be an effective approach to decrease the recipient immune response, preventing recipient immune recognition of xenogeneic tissue engineered heart valves, and potentially leading to reduction in SVD incidence. [ABSTRACT FROM AUTHOR]

Abstract Background Since autologous veins are unavailable when needed in more than 20% of cases in vascular surgery, the production of personalized biological vascular grafts for implantation has become crucial. Surface modification of decellularized xenogeneic grafts with vascular cells to achieve physiological luminal coverage and eventually thromboresistance is an important prerequisite for implantation. However, ex vivo thrombogenicity testing remains a neglected area in the field of tissue engineering of vascular grafts due to a multifold of reasons. Methods After seeding decellularized bovine carotid arteries with human endothelial progenitor cells and umbilical cord-derived mesenchymal stem cells, luminal endothelial cell coverage (LECC) was correlated with glucose and lactate levels on the cell supernatant. Then a closed loop whole blood perfusion system was designed. Recellularized grafts with a LECC > 50% and decellularized vascular grafts were perfused with human whole blood for 2 h. Hemolysis and complete blood count evaluation was performed on an hourly basis, followed by histological and immunohistochemical analysis. Results While whole blood perfusion of decellularized grafts significantly reduced platelet counts, platelet depletion from blood resulting from binding to re-endothelialized grafts was insignificant (p = 0.7284). Moreover, macroscopic evaluation revealed thrombus formation only in the lumen of unseeded grafts and histological characterization revealed lack of CD41 positive platelets in recellularized grafts, thus confirming their thromboresistance. Conclusion In the present study we were able to demonstrate the effect of surface modification of vascular grafts in their thromboresistance in an ex vivo whole blood perfusion system. To our knowledge, this is the first study to expose engineered vascular grafts to human whole blood, recirculating at high flow rates, immediately after seeding.

Chronic respiratory diseases remain a significant health burden worldwide. The only option for individuals with end-stage lung failure remains Lung Transplantation. However, suitable organ donor shortages and immune rejection following transplantation remain a challenge. Since alternative options are urgently required to increase tissue availability for lung transplantation, researchers have been exploring lung bioengineering extensively, to generate functional, transplantable organs and tissue. Additionally, the development of physiologically-relevant artificial tissue models for testing novel therapies also represents an important step toward finding a definite clinical solution for different chronic respiratory diseases. This mini-review aims to highlight some of the most common methodologies used in bioengineering lung scaffolds, as well as the benefits and disadvantages associated with each method in conjunction with the current areas of research devoted to solving some of these challenges in the area of lung bioengineering.

Background: Nanofat grafting (NG) is a simple and cost-effective method of lipoaspirates with inter-syringe passages, to produce stromal vascular fraction (SVF) and isolate adipose-derived stem cells (ASCs). This represents a tremendous interest in the future clinical needs of tissue engineering. In this study, we optimized the NG technique to increase the yield of ASC extractions.Methods: We analyzed three groups of SVF obtained by 20, 30, and 40 inter-syringe passages. The control group was an SVF obtained by enzymatic digestion with Celase. We studied their cell composition by flow cytometry, observed their architecture by confocal microscopy, and observed immunomodulatory properties of the ASCs from each of the SVFs by measuring inflammatory markers of macrophages obtained by an ASC monocyte co-culture.Results: We have established the first cell mapping of the stromal vascular fraction of adipose tissue. The results showed that SVF obtained by 20 inter-syringe passages contains more statistically significant total cells, more cells expressing the ASC phenotype, more endothelial cells, and produces more CFU-F than the SVF obtained by 30 and 40 passages and by enzymatic digestion. Confocal microscopy showed the presence of residual adipocytes in SVF obtained by inter-syringe passages but not by enzymatic digestion. The functional study indicates an orientation toward a more anti-inflammatory profile and homogenization of their immunomodulatory properties.Conclusion: This study places mechanically dissociated SVF in the center of approaches to easily extract ASCs and a wide variety and number of other progenitor cells, immediately available in a clinical setting to provide both the amount and quality of cells required for decellularized tissues.

Decellularized tissue is generally considered immune privileged after transplantation and is an attractive scaffold type for tissue regeneration, including applications for infertility treatment. However, the immune response following transplantation of decellularized tissue is insufficiently studied, in particular after they have been recellularized with mesenchymal stem cells (MSCs). Therefore, we replaced a large uterus segment with a bioengineered graft developed from decellularized uterus tissue and analyzed the immune response during the first 4 months in acellular or MSCs-recellularized scaffolds in the rat. Immunohistochemistry-stained infiltrating immune cells and plasma levels for 16 cytokines and chemokines were quantified. Results revealed that MSCs created an advantageous microenvironment by increasing anti-inflammatory interleukin 10 levels, and increasing the population of FOXP3+ TRegs and CD163+ M2 macrophages, and by reducing the CD8+ cytotoxic T cell population. Hence, MSCs should be considered an immunotherapeutic cell source with the ability to dictate regeneration success after decellularized tissue transplantation. [ABSTRACT FROM AUTHOR]