Search

Abstract Background Rollover crashes continue to be a substantial public health issue in North America. Previous research has shown that the cervical spine is the most injured spine segment in rollovers, but much of the past research has focused on risk factors rather than the actual cervical spine injuries. We sought to examine how different types of cervical spine injuries (vertebral and/or cord injury) vary with different occupant-related factors in rollovers and to compare these with non-rollovers. Methods We obtained crash and injury information from the National Automotive Sampling System–Crashworthiness Data System (NASS-CDS) for 2005–2015 and Crash Investigation Sampling System (CISS) for 2017–2022. Based on weighted data, we calculated relative risks to assess how occupant sex, seat belt use, ejection status, and fatal outcome relate to the rate of different cervical spine injuries in rollovers and non-rollovers. Results In NASS-CDS occupants with cervical spine injuries (N = 111,040 weighted cases), about 91.5% experienced at least one vertebral injury whereas only 11.3% experienced a spinal cord injury (most of which had a concomitant vertebral fracture). All types of cervical spine injuries we examined were 3.4–5.2 times more likely to occur in rollovers compared to non-rollovers. These relative risks were similar for both sexes, belted and unbelted, non-ejected, and non-fatal occupants. The number of weighted CISS occupants with cervical spine injuries (N = 42,003) was smaller than in the NASS analysis, but cervical spine injuries remained 6.25 to 6.36 times more likely in rollovers compared to non-rollovers despite a more modern vehicle fleet. Conclusions These findings underscore the continued need for rollover-specific safety countermeasures, especially those focused on cervical spine injury prevention, and elucidate the frequency, severity and other characteristics of the specific vertebral and spinal cord injuries being sustained in rollovers. Our findings suggest that countermeasures focused on preventing cervical vertebral fractures will also effectively prevent most cervical spinal cord injuries.

Abstract Background Facet fractures are frequently associated with clinically observed cervical facet dislocations (CFDs); however, to date there has only been one experimental study, using functional spinal units (FSUs), which has systematically produced CFD with concomitant facet fracture. The role of axial compression and distraction on the mechanical response of the cervical facets under intervertebral motions associated with CFD in FSUs has previously been shown. The same has not been demonstrated in multi‐segment lower cervical spine specimens under flexion loading (postulated to be the local injury vector associated with CFD). Methods This study investigated the mechanical response of the bilateral inferior C6 facets of thirteen C5‐C7 specimens (67±13 yr, 6 male) during non‐destructive constrained flexion, superimposed with each of five axial conditions: (1) 50 N compression (simulating weight of the head); (2‐4) 300, 500, and 1000 N compression (simulating the spectrum of intervertebral compression resulting from neck muscle bracing prior to head‐first impact and/or externally applied compressive forces); and, (5) 2 mm of C6/C7 distraction (simulating the intervertebral distraction present during inertial loading of the cervical spine by the weight of the head). Linear mixed‐effects models (α = 0.05) assessed the effect of axial condition. Results Increasing amounts of intervertebral compression superimposed on flexion rotations, resulted in increased facet surface strains (range of estimated mean difference relative to Neutral: maximum principal = 77 to 110 με, minimum principal = 126 to 293 με, maximum shear = 203 to 375 με) and angular deflection of the bilateral inferior C6 facets relative to the C6 vertebral body (range of estimated mean difference relative to Neutral = 0.59° to 1.47°). Conclusions These findings suggest increased facet engagement and higher load transfer through the facet joint, and potentially a higher likelihood of facet fracture under the compressed axial conditions.

Femoral fractures due to sideways falls continue to be a major cause of concern for the elderly. Existing approaches for the prevention of these injuries have limited efficacy. Prophylactic femoral augmentation systems, particularly those involving the injection of ceramic-based bone cements, are gaining more attention as a potential alternative preventative approach. We evaluated the mechanical effectiveness of three variations of a bone cement injection pattern (basic ellipsoid, hollow ellipsoid, small ellipsoid) utilizing finite element simulations of sideways fall impacts. The basic augmentation pattern was tested with both high- and low-strength ceramic-based cements. The cement patterns were added to the finite element models (FEMs) of five cadaveric femurs, which were then subject to simulated sideways falls at seven impact velocities ranging from 1.0 m/s to 4.0 m/s. Peak impact forces and peak acetabular forces were examined, and failure was evaluated using a strain-based criterion. We found that the basic HA ellipsoid provided the highest increases in both the force at the acetabulum of the impacted femur (“acetabular force”, 55.0% ± 22.0%) and at the force plate (“impact force”, 37.4% ± 15.8%). Changing the cement to a weaker material, brushite, resulted in reduced strengthening of the femur (45.2% ± 19.4% acetabular and 30.4% ± 13.0% impact). Using a hollow version of the ellipsoid appeared to have no effect on the fracture outcome and only a minor effect on the other metrics (54.1% ± 22.3% acetabular force increase and 35.3% ± 16.0% impact force increase). However, when the outer two layers of the ellipsoid were removed (small ellipsoid), the force increases that were achieved were only 9.8% ± 5.5% acetabular force and 8.2% ± 4.1% impact force. These results demonstrate the importance of supporting the femoral neck cortex to prevent femoral fractures in a sideways fall, and provide plausible options for prophylactic femoral augmentation. As this is a preliminary study, the surgical technique, the possible effects of trabecular bone damage during the augmentation process, and the effect on the blood supply to the femoral head must be assessed further.

Traumatic brain injury (TBI) is an established risk factor for neurodegenerative diseases. In this study, we used the Closed Head Injury Model of Engineered Rotational Acceleration (CHIMERA) to investigate the effects of a single high-energy TBI in rTg4510 mice, a mouse model of tauopathy. Fifteen male rTg4510 mice (4 mo) were impacted at 4.0 J using interfaced CHIMERA and were compared to sham controls. Immediately after injury, the TBI mice showed significant mortality (7/15; 47%) and a prolonged duration of loss of the righting reflex. At 2 mo post-injury, surviving mice displayed significant microgliosis (Iba1) and axonal injury (Neurosilver). Western blotting indicated a reduced p-GSK-3β (S9):GSK-3β ratio in TBI mice, suggesting chronic activation of tau kinase. Although longitudinal analysis of plasma total tau suggested that TBI accelerates the appearance of tau in the circulation, there were no significant differences in brain total or p-tau levels, nor did we observe evidence of enhanced neurodegeneration in TBI mice compared to sham mice. In summary, we showed that a single high-energy head impact induces chronic white matter injury and altered GSK-3β activity without an apparent change in post-injury tauopathy in rTg4510 mice.