Search

Nanocrystals of CsPbBr3, a colloidal perovskite, are hybridized with silver nanoparticles (Ag NPs) and organic molecules (2,5‐diphenyloxazole, PPO) to improve X‐ray radioluminescence (RL). It is known that charge transfer from the PPO molecules to the CsPbBr3 nanocrystals enhances the RL efficiency of the CsPbBr3 nanocrystals. In this study, Ag NPs are introduced to further enhance the RL efficiency. The plasmonic process of the Ag NPs is activated by the PPO molecules, which contain X‐ray‐induced high‐energy charges. Subsequently, electric fields induced by the plasmonic process of the Ag NPs accelerate the charge transfer from the PPO molecules to the CsPbBr3 nanocrystals. The plasmonic effect of the Ag NPs is demonstrated by the full‐width half maximum (FWHM): the photoluminescence FWHM of the hybridized CsPbBr3 nanocrystals is reduced, whereas the RL FWHM remains unchanged. The Ag‐NP‐induced plasmonic effect improves the RL efficiency of the PPO‐decorated CsPbBr3 nanocrystals by ≈10%. The obtained results demonstrate that a plasmonic process can strengthen the RL of X‐ray scintillators for X‐ray detection and imaging. [ABSTRACT FROM AUTHOR]

Facile template–free controllable growth of freestanding polyhedron–like CoS onto microporous Ni foam with three-dimensional architecture via a mild hydrothermal technique is reported. The as-obtained CoS catalyst phase was first tailored to N-Co9S8 (nitrogen doped Co9S8), and its inherent reaction kinetics and conductivity were then enhanced through sulfur incorporation via a hydrothermal process. The electrochemical performance of the pristine CoS and a sulfur-enriched N-Co9S8 (S, N-Co9S8) electrode in alkaline 1.0 M KOH was examined. The optimized polyhedral S, N-Co9S8 structured catalyst exhibits significantly enhanced electrocatalytic activity for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). As a result, low overpotentials of 244 and −92 mV is required to achieve the current density of 10 mA cm−2 for the OER and HER, respectively. Furthermore, when the polyhedral S, N-Co9S8 catalyst was employed as a bifunctional catalyst in a two-electrode electrolyzer cell exhibiting a cell voltage of 1.549 V at 10 mA cm−2 and demonstrates excellent long-term (50 hrs.) chronopotentiometric electrolysis at various current rate, reveals excellent bifunctional OER and HER activities at different applied current densities. The superior OER and HER activities of the S, N-Co9S8 catalyst is result of the improved electronic conductivity and enhanced intrinsic reaction kinetics, which led to the enhanced electrocatalytically active sites after the incorporation of heteroatoms in the catalyst structure. [ABSTRACT FROM AUTHOR]

In everyday life, superior lithium-ion batteries (LIBs), with fast charging ability, have become valuable assets. The LIB performance of an anode composite copper cobalt tin sulphide (Cu2CoSnS4; CCTS) electrode, which was fabricated using a simple and easy hydrothermal method, was investigated. The electrochemical charge storage performance of the CCTS anode demonstrated sustainability, high-rate capability and efficiency. The CCTS anode exhibited a first discharge capacity of 914.5 mA h g−1 and an average specific capacity of 198.7 mA h g−1 in consecutive cycles at a current density of 0.1 A g−1. It had a capacity retention of ∼62.0% and a coulombic efficiency of more than 83% after over 100 cycles, demonstrating its excellent cycling performance and reversibility. It can be an alternative anode to other established electrode materials for real battery applications. [ABSTRACT FROM AUTHOR]

Because hydrogen is an ideal energy source, electrocatalysts for water splitting that employ transition metal hydroxides rather than expensive precious metals to produce molecular hydrogen have been extensively investigated. In the present study, NixFeyMoz layered double hydroxide (LDH) electrocatalysts fabricated via a simple hydrothermal technique for overall water splitting in an alkaline medium are reported. The best-performing NixFeyMoz LDH catalysts require overpotentials of 200 and 86 mV to reach a current density of 10 mA cm−2 for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. Theoretical analysis indicates that the Mo-rich OMo2Fe and Fe-rich OFe3 active sites strongly activate the HER and OER, respectively. More importantly, a water electrolyzer containing the best-performing NixFeyMoz LDH catalysts as the anode and cathode is able to reach an industrially relevant current density of 1000 mA cm−2 at a cell voltage of only 2.1 V. The electrolyzer exhibits outstanding stability at very high current densities of 0.1, 0.5 and 1 A cm−2 for overall water splitting over 90 hours of continuous operation, which is superior to state-of-the-art devices based on precious metals. The overall water-splitting activity presented here demonstrates the practical potential of the proposed electrocatalysts as inexpensive options for use in water electrolyzers. [ABSTRACT FROM AUTHOR]

Green hydrogen derived from the water-electrolysis route is emerging as a game changer for achieving global carbon neutrality. Economically producing hydrogen through water electrolysis, however, requires the development of low-cost and highly efficient electrocatalysts via scalable synthetic strategies. Herein, this work reports a simple and scalable immersion synthetic strategy to deposit reduced graphene oxide (rGO) nanosheets integrated with Ni–Fe-based hydroxide nanocatalysts on nickel foam (NF) at room temperature. As a result of synergetic interactions among the hydroxides, rGO and NF, enhanced catalytic sites with improved charge transport between the electrode and electrolyte were perceived, resulting in significantly enhanced oxygen evolution reaction (OER) activity with low overpotentials of 270 and 320 mV at 100 and 500 mA cm−2, respectively, in a 1.0 M KOH aqueous electrolyte. This performance is superior to those of the hydroxide-based electrode without incorporating rGO and the IrO2-benchmark electrode. Furthermore, when the conventional OER is substituted with urea decomposition (UOR) as a proxy anodic reaction, the electrolyzer achieves 100 and 500 mA cm−2 at a lower potential by 150 and 120 mV, respectively than the OER counterpart without influencing the hydrogen evolution reaction (HER) activity at the cathode. Notably, the rGO-incorporated electrode delivers a spectacularly high UOR current density of 1600 mA cm−2 at 1.53 V vs. RHE, indicating the decomposition of urea at an outstandingly high rate. [ABSTRACT FROM AUTHOR]