Search

Morocco’s economy has recently seen an unprecedented growth, which made the country emerge into the 5th strongest economy of the African continent. As other countries at the same stage of development, Morocco is also undergoing rapid urbanization, which results in increased anthropogenic air-pollution levels. The geographical location of the country makes it vulnerable to both short and longterm impacts of climate change. Despite the elevated risk and vulnerability, the current air pollution and climate change monitoring strategy of the country needs improvement. The present paper introduces a novel strategy to improve the air quality monitoring system in the capital combined with developing a project-based climate education curriculum, and promises to raise public awareness to the risks related to air pollution and climate change. The sustainability of the project is guaranteed by the low cost of instruments and the educational aspect which ensures that future experts are well-trained for the maintenance of the system that we propose to install.

The indoor air quality of a residential home during winter in Fairbanks, Alaska, was investigated and contrasted with outdoor levels. Twenty-four-hour average indoor and outdoor filter samples were collected from January 17 to February 25, 2022, in a residential area with high outdoor PM2.5 concentrations. The oxidative potential of PM2.5 was determined using the dithiothreitol-depletion assay (OPDTT). For the unoccupied house, the background indoor-to-outdoor (I/O) ratio of mass-normalized OP (OPmDTT), a measure of the intrinsic health-relevant properties of the aerosol, was less than 1 (0.53 ± 0.37), implying a loss of aerosol toxicity as air was transported indoors. This may result from transport and volatility losses driven by the large gradients in temperature (average outdoor temperature of -19°C/average indoor temperature of 21 °C) or relative humidity (average outdoor RH of 78%/average indoor RH of 11%), or both. Various indoor activities, including pellet stove use, simple cooking experiments, incense burning, and mixtures of these activities, were conducted. The experiments produced PM2.5 with a highly variable OPmDTT. PM2.5 from cooking emissions had the lowest OP values, while pellet stove PM2.5 had the highest. Correlations between volume-normalized OPDTT (OPvDTT), relevant to exposure, and indoor PM2.5 mass concentration during experiments were much lower compared to those in outdoor environments. This suggests that mass concentration alone can be a poor indicator of possible adverse effects of various indoor emissions. These findings highlight the importance of considering both the quantity of particles and sources (chemical composition), as health metrics for indoor air quality.

The oxidative potential (OP) of outdoor PM2.5 in wintertime Fairbanks, Alaska, is investigated and compared to those in wintertime Atlanta and Los Angeles. Approximately 40 filter samples collected in January-February 2022 at a Fairbanks residential site were analyzed for OP utilizing dithiothreitol-depletion (OPDTT) and hydroxyl-generation (OPOH) assays. The study-average PM2.5 mass concentration was 12.8 μg/m3, with a 1 h average maximum of 89.0 μg/m3. Regression analysis, correlations with source tracers, and contrast between cold and warmer events indicated that OPDTT was mainly sensitive to copper, elemental carbon, and organic aerosol from residential wood burning, and OPOH to iron and organic aerosol from vehicles. Despite low photochemically-driven oxidation rates, the water-soluble fraction of OPDTT was unusually high at 77%, mainly from wood burning emissions. In contrast to other locations, the Fairbanks average PM2.5 mass concentration was higher than Atlanta and Los Angeles, whereas OPDTT in Fairbanks and Atlanta were similar, and Los Angeles had the highest OPDTT and OPOH. Site differences were observed in OP when normalized by both the volume of air sampled and the particle mass concentration, corresponding to exposure and the intrinsic health-related properties of PM2.5, respectively. The sensitivity of OP assays to specific aerosol components and sources can provide insights beyond the PM2.5 mass concentration when assessing air quality.

The Alaskan Layered Pollution And Chemical Analysis (ALPACA) field experiment was a collaborative study designed to improve understanding of pollution sources and chemical processes during winter (cold climate and low-photochemical activity), to investigate indoor pollution, and to study dispersion of pollution as affected by frequent temperature inversions. A number of the research goals were motivated by questions raised by residents of Fairbanks, Alaska, where the study was held. This paper describes the measurement strategies and the conditions encountered during the January and February 2022 field experiment, and reports early examples of how the measurements addressed research goals, particularly those of interest to the residents. Outdoor air measurements showed high concentrations of particulate matter and pollutant gases including volatile organic carbon species. During pollution events, low winds and extremely stable atmospheric conditions trapped pollution below 73 m, an extremely shallow vertical scale. Tethered-balloon-based measurements intercepted plumes aloft, which were associated with power plant point sources through transport modeling. Because cold climate residents spend much of their time indoors, the study included an indoor air quality component, where measurements were made inside and outside a house to study infiltration and indoor sources. In the absence of indoor activities such as cooking and/or heating with a pellet stove, indoor particulate matter concentrations were lower than outdoors; however, cooking and pellet stove burns often caused higher indoor particulate matter concentrations than outdoors. The mass-normalized particulate matter oxidative potential, a health-relevant property measured here by the reactivity with dithiothreiol, of indoor particles varied by source, with cooking particles having less oxidative potential per mass than pellet stove particles.

In-situ marine cloud droplet number concentrations (CDNCs), cloud condensation nuclei (CCN), and CCN proxies, based on particle sizes and optical properties, are accumulated from seven field campaigns: ACTIVATE; NAAMES; CAMP2EX; ORACLES; SOCRATES; MARCUS; and CAPRICORN2. Each campaign involves aircraft measurements, ship-based measurements, or both. Measurements collected over the North and Central Atlantic, Indo-Pacific, and Southern Oceans, represent a range of clean to polluted conditions in various climate regimes. With the extensive range of environmental conditions sampled, this data collection is ideal for testing satellite remote detection methods of CDNC and CCN in marine environments. Remote measurement methods are vital to expanding the available data in these difficult-to-reach regions of the Earth and improving our understanding of aerosol-cloud interactions. The data collection includes particle composition and continental tracers to identify potential contributing CCN sources. Several of these campaigns include High Spectral Resolution Lidar (HSRL) and polarimetric imaging measurements and retrievals that will be the basis for the next generation of space-based remote sensors and, thus, can be utilized as satellite surrogates.

A large part of the uncertainty in climate projections comes from uncertain aerosol properties and aerosol-cloud interactions as well as the difficulty in remotely sensing them. The southeastern Atlantic functions as a natural laboratory to study biomass-burning smoke and to constrain this uncertainty. We address these gaps by comparing the Weather Research and Forecasting with Chemistry Community Atmosphere Model (WRF-CAM5) to the multi-campaign observations ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS), CLARIFY (CLoud-Aerosol-Radiation Interaction and Forcing), and LASIC (Layered Atlantic Smoke Interactions with Clouds) in the southeastern Atlantic in August 2017 to evaluate a large range of the model's aerosol chemical properties, size distributions, processes, and transport, as well as aerosol-cloud interactions. Overall, while WRF-CAM5 is able to represent smoke properties and transport, some key discrepancies highlight the need for further analysis. Observations of smoke composition show an overall decrease in aerosol mean diameter as smoke ages over 4-12 d, while the model lacks this trend. A decrease in the mass ratio of organic aerosol (OA) to black carbon (BC), OA:BC, and the OA mass to carbon monoxide (CO) mixing ratio, OA:CO, suggests that the model is missing processes that selectively remove OA from the particle phase, such as photolysis and heterogeneous aerosol chemistry. A large (factor of ∼2.5) enhancement in sulfate from the free troposphere (FT) to the boundary layer (BL) in observations is not present in the model, pointing to the importance of properly representing secondary sulfate aerosol formation from marine dimethyl sulfide and gaseous SO2 smoke emissions. The model shows a persistent overprediction of aerosols in the marine boundary layer (MBL), especially for clean conditions, which multiple pieces of evidence link to weaker aerosol removal in the modeled MBL than reality. This evidence includes several model features, such as not representing observed shifts towards smaller aerosol diameters, inaccurate concentration ratios of carbon monoxide and black carbon, underprediction of heavy rain events, and little evidence of persistent biases in modeled entrainment. The average below-cloud aerosol activation fraction (NCLD/NAER) remains relatively constant in WRF-CAM5 between field campaigns (∼0.65), while it decreases substantially in observations from ORACLES (∼0.78) to CLARIFY (∼0.5), which could be due to the model misrepresentation of clean aerosol conditions. WRF-CAM5 also overshoots an observed upper limit on liquid cloud droplet concentration around NCLDCombining double low line 400-500 cm-3 and overpredicts the spread in NCLD. This could be related to the model often drastically overestimating the strength of boundary layer vertical turbulence by up to a factor of 10. We expect these results to motivate similar evaluations of other modeling systems and promote model development to reduce critical uncertainties in climate simulations. Copyright:

The interaction between water vapor and atmospheric aerosol leads to enhancement in aerosol water content, which facilitates haze development, but its concentrations, sources, and impacts remain largely unknown in polluted urban environments. Here, we show that the Indian capital, Delhi, which tops the list of polluted capital cities, also experiences the highest aerosol water yet reported worldwide. This high aerosol water promotes secondary formation of aerosols and worsens air pollution. We report that severe pollution events are commonly associated with high aerosol water which enhances light scattering and reduces visibility by 70%. Strong light scattering also suppresses the boundary layer height on winter mornings in Delhi, inhibiting dispersal of pollutants and further exacerbating morning pollution peaks. We provide evidence that ammonium chloride is the largest contributor to aerosol water in Delhi, making up 40% on average, and we highlight that regulation of chlorine-containing precursors should be considered in mitigation strategies.

We describe a novel biosafety aerosol chamber equipped with state-of-theart instrumentation for bubble-bursting aerosol generation, size distribution measurement, and condensation-growth collection to minimize sampling artifacts when measuring virus infectivity in aerosol particles. Using this facility, we investigated the effect of relative humidity (RH) in very clean air without trace gases (except ~400 ppm CO2) on the preservation of influenza A virus (IAV) infectivity in saline aerosol particles. We characterized infectivity in terms of 99%-inactivation time, t99, a metric we consider most relevant to airborne virus transmission. The viruses remained infectious for a long time, namely t99 > 5 h, if RH < 30% and the particles effloresced. Under intermediate conditions of humidity (40% < RH < 70%), the loss of infectivity was the most rapid (t99 ∾ 15-20 min, and up to t99 ∾ 35 min at 95% RH). This is more than an order of magnitude faster than suggested by many previous studies of aerosol-borne IAV, possibly due to the use of matrices containing organic molecules, such as proteins, with protective effects for the virus. We tested this hypothesis by adding sucrose to our aerosolization medium and, indeed, observed protection of IAV at intermediate RH (55%). Interestingly, the t99 of our measurements are also systematically lower than those in 1-mL droplet measurements of organic-free saline solutions, which cannot be explained by particle size effects alone. [ABSTRACT FROM AUTHOR]

China has long-term high PM2.5 levels, and its oxidative potential (OP) is worth studying as it may unravel the impacts of aerosol pollution on public health better than PM2.5 alone. OP refers to the ability of PM2.5 to induce oxidative stress (OS). OP and PM2.5 are influenced by meteorological factors, anthropogenic emission sources, and atmospheric aging. Although their impact on PM2.5 has been studied, OP measurements only recently became available and on a limited scale, as they require considerable technical expertise and resources. For this, the joint relationship between PM2.5 and OP for a wide range of meteorological conditions and emission profiles remain elusive. Towards this, we estimated PM2.5 and OP over China using the Danish Eulerian Hemispheric Model (DEHM) system with meteorological input from the Weather Research and Forecasting (WRF) model. It was found that higher values of PM2.5 and OP were primarily concentrated in urban agglomerations in the central and eastern regions of China, while lower values were found in the western and northeastern regions. Furthermore, the probability density function revealed that about 40 % of areas in China had annual average PM2.5 concentrations exceeding the Chinese concentration limit. For OP, 36 % of the regions have OP below 1 nmolmin-1m-3 , 41 % have OP between 1 and 2 nmolmin-1m-3 , and 23 % have OP above 2 nmolmin-1m-3 , which are in line with previous measurement studies. Analysis of the simulations indicates that meteorological conditions contributed 46 % and 65 % to PM2.5 concentrations and OP variability, respectively, while anthropogenic emissions contributed 54 % and 35 % to PM2.5 concentrations and OP variability, respectively. The emission sensitivity analysis also highlighted the fact that PM2.5 and OP levels are mostly determined by secondary aerosol formation and biomass burning. [ABSTRACT FROM AUTHOR]

Given the importance of aerosols and clouds and their interactions in the climate system, it is imperative that the global Earth system models accurately represent processes associated with them. This is an important prerequisite if we are to narrow the uncertainties in future climate projections. In practice, this means that continuous model evaluations and improvements grounded in observations are necessary. Numerous studies in the past few decades have shown both the usability and the limitations of utilizing satellite-based observations in understanding and evaluating aerosol–cloud interactions, particularly under varying meteorological and satellite sensor sensitivity paradigms. Furthermore, the vast range of spatio-temporal scales at which aerosol and cloud processes occur adds another dimension to the challenges faced when evaluating climate models. In this context, the aim of this study is two-fold. (1) We evaluate the most recent, significant changes in the representation of aerosol and cloud processes implemented in the EC-Earth3-AerChem model in the framework of the EU project FORCeS compared with its previous CMIP6 version (Coupled Model Intercomparison Project Phase 6; https://pcmdi.llnl.gov/CMIP6/ , last access: 13 February 2019). We focus particularly on evaluating cloud physical properties and radiative effects, wherever possible, using a satellite simulator. We report on the overall improvements in the EC-Earth3-AerChem model. In particular, the strong warm bias chronically seen over the Southern Ocean is reduced significantly. (2) A statistical, maximum covariance analysis is carried out between aerosol optical depth (AOD) and cloud droplet (CD) effective radius based on the recent EC-Earth3-AerChem/FORCeS simulation to understand to what extent the Twomey effect can manifest itself in the larger spatio-temporal scales. We focus on the three oceanic low-level cloud regimes that are important due to their strong net cooling effect and where pollution outflow from the nearby continent is simultaneously pervasive. We report that the statistical covariability between AOD and CD effective radius is indeed dominantly visible even at the climate scale when the aerosol amount and composition are favourably preconditioned to allow for aerosol–cloud interactions. Despite this strong covariability, our analysis shows a strong cooling/warming in shortwave cloud radiative effects at the top of the atmosphere in our study regions associated with an increase/decrease in CD effective radius. This cooling/warming can be attributed to the increase/decrease in low cloud fraction, in line with previous observational studies. [ABSTRACT FROM AUTHOR]

Aerosol–cloud interactions in mixed-phase clouds (MPCs) are one of the most uncertain drivers of the hydrological cycle and climate change. A synergy of in situ, remote-sensing and modelling experiments were used to determine the source of ice-nucleating particles (INPs) for MPCs at Mount Helmos in the eastern Mediterranean. The influences of boundary layer turbulence, vertical aerosol distributions and meteorological conditions were also examined. When the observation site is in the free troposphere (FT), approximately 1 in ×106 aerosol particles serve as INPs around -25 °C. The INP abundance spans 3 orders of magnitude and increases in the following order: marine aerosols; continental aerosols; and, finally, dust plumes. Biological particles are important INPs observed in continental and marine aerosols, whereas they play a secondary, although important, role during Saharan dust events. Air masses in the planetary boundary layer (PBL) show both enriched INP concentrations and a higher proportion of INPs to total aerosol particles, compared with cases in the FT. The presence of precipitation/clouds enriches INPs in the FT but decreases INPs in the PBL. Additionally, new INP parameterizations are developed that incorporate the ratio of fluorescent-to-nonfluorescent or coarse-to-fine particles and predict >90 % of the observed INPs within an uncertainty range of a factor of 10; these new parameterizations exhibit better performance than current widely used parameterizations and allow ice formation in models to respond to variations in dust and biological particles. The improved parameterizations can help MPC formation simulations in regions with various INP sources or different regions with prevailing INP sources. [ABSTRACT FROM AUTHOR]

The purpose of this study is to understand the drivers of cloud droplet formation in orographic clouds. We used a combination of modeling, in situ, and remote sensing measurements at the high-altitude Helmos Hellenic Atmospheric Aerosol and Climate Change ((HAC) 2) station, which is located at the top of Mt. Helmos (1314 m above sea level), Greece, during the Cloud–AerosoL InteractionS in the Helmos Background TropOsphere (CALISHTO) campaign in fall 2021 (https://calishto.panacea-ri.gr/ , last access: 1 August 2024) to examine the origins of the aerosols (i.e., local aerosol from the planetary boundary layer (PBL) or long-range-transported aerosol from the free-tropospheric layer (FTL) contributing to the cloud condensation nuclei (CCN)), their characteristics (hygroscopicity, size distribution, and mixing state), and the vertical velocity distributions and resulting supersaturations. We found that the characteristics of the PBL aerosol were considerably different from FTL aerosol and use the aerosol particle number and equivalent mass concentration of the black carbon (eBC) in order to determine when (HAC) 2 was within the FTL or PBL based on time series of the height of the PBL. During the (HAC) 2 cloud events we sample a mixture of interstitial aerosol and droplet residues, which we characterize using a new approach that utilizes the in situ droplet measurements to determine time periods when the aerosol sample is purely interstitial. From the dataset we determine the properties (size distribution and hygroscopicity) of the pre-cloud, activated, and interstitial aerosol. The hygroscopicity of activated aerosol is found to be higher than that of the interstitial or pre-cloud aerosol. A series of closure studies with the droplet parameterization shows that cloud droplet concentration (Nd) and supersaturation can be predicted to within 25 % of observations when the aerosol size distributions correspond to pre-cloud conditions. The analysis of the characteristic supersaturation of each aerosol population indicates that droplet formation in clouds is aerosol-limited when formed in FTL air masses – hence droplet formation is driven by aerosol variations, while clouds formed in the PBL tend to be velocity-limited and droplet variations are driven by fluctuations in vertical velocity. Given that the cloud dynamics do not vary significantly between air masses, the variation in aerosol concentration and type is mostly responsible for these shifts in cloud microphysical state and sensitivity to aerosol. With these insights, the remote sensing of cloud droplets in such clouds can be used to infer either CCN spectra (when in the FTL) or vertical velocity (when in the PBL). In conclusion, we show that a coordinated measurement of aerosol and cloud properties, together with the novel analysis approaches presented here, allows for the determination of the drivers of droplet formation in orographic clouds and their sensitivity to aerosol and vertical velocity variations. [ABSTRACT FROM AUTHOR]

Remote sensing has been a key resource for developing extensive and detailed datasets for studying and constraining aerosol-cloud-climate interactions. However, aerosol-cloud collocation challenges, algorithm limitations, as well as difficulties in unraveling dynamic from aerosol-related effects on cloud microphysics, have long challenged precise retrievals of cloud droplet number concentrations. By combining a series of remote sensing techniques and in situ measurements at ground level, we developed a semiautomated approach that can address several retrieval issues for a robust estimation of cloud droplet number for non-precipitating Planetary Boundary Layer (PBL) clouds. The approach is based on satellite retrievals of the PBL cloud droplet number (Ndsat) using the geostationary meteorological satellite data of the Optimal Cloud Analysis (OCA) product, which is obtained by the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) of the European Organization for the Exploitation of Meteorological Satellites (EUMETSAT). The parameters of the retrieval are optimized through closure with droplet number obtained from a combination of ground-based remote sensing data and in situ observations at ground level. More specifically, the remote sensing data are used to retrieve cloud-scale vertical velocity, and the in situ aerosol measurements at ground level were used constrain as input to a state-of-the-art droplet activation parameterization to predict the respective Cloud Condensation Nuclei (CCN) spectra, cloud maximum supersaturation and droplet number concentration (Nd), accounting for the effects of vertical velocity distribution and lateral entrainment. Closure studies between collocated Nd and Nd sat are then used to evaluate exising droplet spectral width parameters used for the retrieval of droplet number, and determine the optimal values for retrieval. This methodology, used to study aerosol-cloud interactions for non-precipitating clouds formed over the Athens Metropolitan Area (AMA), Greece, during the springtime period from March to May 2020, shows that droplet closure can be achieved to within ±33.4%, comparable to the level of closure obtained in many in situ studies. Given this, the ease of applying this approach with satellite data obtained from SEVIRI with high temporal (15 min) and spatial resolution (3.6 km Ã--4.6 km), opens the possibility of continuous and reliable Ndsat, giving rise to high value datasets for aerosol-cloud-climate interaction studies. [ABSTRACT FROM AUTHOR]

The 2015 Paris agreement was established to limit Greenhouse gas (GHG) global warming below 1.5°C above preindustrial era values. Knowledge of climate sensitivity to GHG levels is central for formulating effective climate policies, yet its exact value is shroud in uncertainty. Climate sensitivity is quantitatively expressed in terms of Equilibrium Climate Sensitivity (ECS) and Transient Climate Response (TCR), estimating global temperature responses after an abrupt or transient doubling of CO2. Here, we represent the complex and highly-dimensional behavior of modelled climate via low-dimensional emergent networks to evaluate Climate Sensitivity (netCS), by first reconstructing meaningful components describing regional subprocesses, and secondly inferring the causal links between these to construct causal networks. We apply this methodology to Sea Surface Temperature (SST) simulations and investigate two different metrics in order to derive weighted estimates that yield likely ranges of ECS (2.35–4.81°C) and TCR (1.53-2.60°C). These ranges are narrower than the unconstrained distributions and consistent with the ranges of the IPCC AR6 estimates. More importantly, netCS demonstrates that SST patterns (at "fast" timescales) are linked to climate sensitivity; SST patterns over the historical period exclude median sensitivity but not low-sensitivity (ECS < 3.0°C) or very high sensitivity (ECS ≥ 4.5°C) models. The Earth's surface temperature response to increasing CO2 emissions remains uncertain in climate models within the CMIP6 project. The authors present a network-based constraint of climate sensitivity of sea surface temperatures that can be used to evaluate and weight CMIP6 models. [ABSTRACT FROM AUTHOR]

The Cloud-AerosoL InteractionS in the Helmos background TropOsphere (CALISHTO) campaign took place in autumn 2021 at the NCSR Demokritos background high-altitude Helmos Hellenic Atmospheric Aerosol and Climate Change station (HAC) 2 to study the interactions between aerosols and clouds. The current study presents the chemical characterization of the non-refractory (NR) PM 1 aerosol fraction using a time-of-flight aerosol chemical speciation monitor (ToF-ACSM). A comparative offline aerosol filter analysis by a high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS) showed consistent results regarding the species determined. Source apportionment applied on both datasets (ACSM-ToF and offline AMS analysis on filter extracts) yielded the same factors for the organic aerosol (one primary and two secondary factors). Additionally, the positive matrix factorization (PMF) model was applied on the total PM 1 fraction by the ToF-ACSM (including both organic and inorganic ions). Five different types were identified, including a primary organic factor; ammonium nitrate; ammonium sulfate; and two secondary organic aerosols, one more oxidized and one less oxidized. The prevailing atmospheric conditions at the station, i.e., cloud presence, influence of emissions from the planetary boundary layer (PBL), and air mass origin, were also incorporated in the study. The segregation between PBL and free-troposphere (FT) conditions was made by combining data from remote sensing and in situ measurement techniques. The types of air masses arriving at the site were grouped as continental, marine, dust, and marine–dust based on back-trajectory data. Significant temporal variability in the aerosol characteristics was observed throughout the campaign; in September, air masses from within the PBL were sampled most of the time, resulting in much higher mass concentrations compared to October and November when concentrations were reduced by a factor of 5. Both in-cloud and FT measurement periods resulted in much lower concentration levels, while a similar composition was observed in PBL and FT conditions. We take advantage of using a recently developed "virtual-filtering" technique to separate interstitial from activated aerosol sampled from a PM 10 inlet during cloudy periods. This allows the determination of the chemical composition of the interstitial aerosol during in-cloud periods. Ammonium sulfate, the dominant PMF factor in all conditions, contributed more when air masses were arriving at (HAC) 2 during dust events, while a higher secondary organic aerosol contribution was observed when air masses arrived from continental Europe. [ABSTRACT FROM AUTHOR]